Autor Wątek: Nie mogę się połączyć z internetem po zmianie procesora  (Przeczytany 416 razy)

Offline vega

  • Miętowe nasionko
  • *
  • Wiadomości: 5
  • Punkty: 0
Nie mogę się połączyć z internetem po zmianie procesora
« dnia: Sierpień 14, 2018, 14:18:38 pm »
Dotychczas byłem na Debianie testing ale po ostatnich aktualizacjach na xfce nie mogę się zalogować na swoje konto, panowie z forum dug.net.pl ustalili, że to wina Xorg-a. Wypróbowuje więc nowego Minta 19 Tara i tutaj mam ten sam problem co na Debianie z siecią czyli nie mogę się połączyć z internetem. Na dug.net.pl podali rowiązanie na debiana takie:
# rmmod -v forcedeth
# modprobe -v forcedeth msi=0 msix=0
# dhclient -v enp0s7
I po tym zabiegu wszystko jest O'K ale na Tarze po wpisaniu pierwszej komendy system się wiesza. Jeśli ktoś coś w tym temacie kuma proszę o przerobienie mi tych komend tak, żebym mógł się połączyć z internetem na Mincie 19.

Offline yahoob3

  • Grupa Trzymająca Władzę
  • Wielki miętus
  • *****
  • Wiadomości: 833
  • Punkty: 190
  • Płeć: Mężczyzna
  • Zgryźliwy tetryk
    • Organy Hammonda
Odp: Nie mogę się połączyć z internetem po zmianie procesora
« Odpowiedź #1 dnia: Sierpień 14, 2018, 14:28:14 pm »
Cześć,
zacznijmy może od
dmesg|pastebinitpodrzuć linka.
Mint 18.3 Cinnamon, kern. 4.10; 64-bit na: Lenovo G500S z CPU Pent. 2020M 2.4 GHz*2; 6 GB RAM; GPU Intel+GeForce 720M;
LU#586742

Offline vega

  • Miętowe nasionko
  • *
  • Wiadomości: 5
  • Punkty: 0

Offline yahoob3

  • Grupa Trzymająca Władzę
  • Wielki miętus
  • *****
  • Wiadomości: 833
  • Punkty: 190
  • Płeć: Mężczyzna
  • Zgryźliwy tetryk
    • Organy Hammonda
Odp: Nie mogę się połączyć z internetem po zmianie procesora
« Odpowiedź #3 dnia: Sierpień 14, 2018, 14:45:25 pm »
:)
Podrzuć linka do wyniku dmesg na pastebin z Minta 19.
Próbowałeś 18.3? Z jakimś nowym jajem?
OK, spadam. Będę wieczorem.
Mint 18.3 Cinnamon, kern. 4.10; 64-bit na: Lenovo G500S z CPU Pent. 2020M 2.4 GHz*2; 6 GB RAM; GPU Intel+GeForce 720M;
LU#586742

Offline vega

  • Miętowe nasionko
  • *
  • Wiadomości: 5
  • Punkty: 0
Odp: Nie mogę się połączyć z internetem po zmianie procesora
« Odpowiedź #4 dnia: Sierpień 14, 2018, 15:09:36 pm »
Nie mam zainstalowanego pastebinit. Tara jest zainstalowana na czysto bez dostępu do internetu, więc nie zainstaluję tego bez uprzedniego rozwiązania problemu dostępu do internetu.
Wynik dmesk:
[email protected]:~$ dmesg
[    0.000000] Linux version 4.15.0-20-generic ([email protected]) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #21-Ubuntu SMP Tue Apr 24 06:16:15 UTC 2018 (Ubuntu 4.15.0-20.21-generic 4.15.17)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-20-generic root=UUID=5d9eef8c-50b0-4a87-a2cc-c2c3e0a301c6 ro quiet splash vt.handoff=1
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] random: get_random_u32 called from bsp_init_amd+0x1e0/0x230 with crng_init=0
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cff9ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cffa0000-0x00000000cffaffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000cffb0000-0x00000000cffdffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cffe0000-0x00000000cfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] random: fast init done
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./N68C-GS FX, BIOS P1.40 10/31/2012
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x12f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFF0000000 write-back
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 000000012f000000 aka 4848M
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT 
[    0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xcffa0 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [        (ptrval)]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x6233e000, 0x6233efff] PGTABLE
[    0.000000] BRK [0x6233f000, 0x6233ffff] PGTABLE
[    0.000000] BRK [0x62340000, 0x62340fff] PGTABLE
[    0.000000] BRK [0x62341000, 0x62341fff] PGTABLE
[    0.000000] BRK [0x62342000, 0x62342fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x311b7000-0x348d2fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FBF20 000014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 0x00000000CFFA0000 00003C (v01 103112 RSDT1514 20121031 MSFT 00000097)
[    0.000000] ACPI: FACP 0x00000000CFFA0200 000084 (v01 A_M_I  OEMFACP  12000601 MSFT 00000097)
[    0.000000] ACPI: DSDT 0x00000000CFFA0470 004D0C (v01 AS626  AS626131 00000131 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000CFFB0000 000040
[    0.000000] ACPI: APIC 0x00000000CFFA0390 0000A0 (v01 103112 APIC1514 20121031 MSFT 00000097)
[    0.000000] ACPI: MCFG 0x00000000CFFA0430 00003C (v01 103112 OEMMCFG  20121031 MSFT 00000097)
[    0.000000] ACPI: OEMB 0x00000000CFFB0040 000072 (v01 103112 OEMB1514 20121031 MSFT 00000097)
[    0.000000] ACPI: AAFT 0x00000000CFFAA470 00002E (v01 103112 OEMAAFT  20121031 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x00000000CFFAA4A0 000B9C (v01 A M I  POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000012effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x12efd3000-0x12effdfff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000012effffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000cff9ffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000012effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000012effffff]
[    0.000000] On node 0 totalpages: 1044286
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13247 pages used for memmap
[    0.000000]   DMA32 zone: 847776 pages, LIFO batch:31
[    0.000000]   Normal zone: 3008 pages used for memmap
[    0.000000]   Normal zone: 192512 pages, LIFO batch:31
[    0.000000] Reserved but unavailable: 98 pages
[    0.000000] Nvidia board detected. Ignoring ACPI timer override.
[    0.000000] If you got timer trouble try acpi_use_timer_override
[    0.000000] ACPI: PM-Timer IO Port: 0x508
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 20, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: BIOS IRQ0 override ignored.
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcffa0000-0xcffaffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcffb0000-0xcffdffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcffe0000-0xcfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xffefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
[    0.000000] e820: [mem 0xd0000000-0xfebfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @        (ptrval) s151552 r8192 d28672 u262144
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1027946
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-20-generic root=UUID=5d9eef8c-50b0-4a87-a2cc-c2c3e0a301c6 ro quiet splash vt.handoff=1
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB)
[    0.000000] AGP: Your BIOS doesn't leave an aperture memory hole
[    0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[    0.000000] AGP: This costs you 64MB of RAM
[    0.000000] AGP: Mapping aperture over RAM [mem 0xc4000000-0xc7ffffff] (65536KB)
[    0.000000] PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
[    0.000000] Memory: 3893948K/4177144K available (12300K kernel code, 2470K rwdata, 4240K rodata, 2404K init, 2416K bss, 283196K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] ftrace: allocating 39065 entries in 153 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[    0.000000] Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] vt handoff: transparent VT on vt#1
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20170831
[    0.000000] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[    0.000000] do_IRQ: 0.55 No irq handler for vector
[    0.020000] tsc: Fast TSC calibration using PIT
[    0.024000] tsc: Detected 3817.222 MHz processor
[    0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 7634.44 BogoMIPS (lpj=15268888)
[    0.024000] pid_max: default: 32768 minimum: 301
[    0.024000] Security Framework initialized
[    0.024000] Yama: becoming mindful.
[    0.024000] AppArmor: AppArmor initialized
[    0.028147] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.028782] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.028818] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.028841] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.029084] CPU: Physical Processor ID: 0
[    0.029085] CPU: Processor Core ID: 0
[    0.029086] mce: CPU supports 7 MCE banks
[    0.029099] LVT offset 1 assigned for vector 0xf9
[    0.029103] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[    0.029104] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[    0.029105] Spectre V2 : Mitigation: Full AMD retpoline
[    0.029106] Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch
[    0.029731] Freeing SMP alternatives memory: 36K
[    0.032000] smpboot: CPU0: AMD FX(tm)-4300 Quad-Core Processor (family: 0x15, model: 0x2, stepping: 0x0)
[    0.032000] mce: [Hardware Error]: Machine check events logged
[    0.032000] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 4: fe00000000070f0f
[    0.032000] mce: [Hardware Error]: TSC 0 ADDR fdfc000cfc MISC c012000001000000
[    0.032000] mce: [Hardware Error]: PROCESSOR 2:600f20 TIME 1534258810 SOCKET 0 APIC 0 microcode 0
[    0.032000] Performance Events: Fam15h core perfctr, AMD PMU driver.
[    0.032000] ... version:                0
[    0.032000] ... bit width:              48
[    0.032000] ... generic registers:      6
[    0.032000] ... value mask:             0000ffffffffffff
[    0.032000] ... max period:             00007fffffffffff
[    0.032000] ... fixed-purpose events:   0
[    0.032000] ... event mask:             000000000000003f
[    0.032000] Hierarchical SRCU implementation.
[    0.032000] smp: Bringing up secondary CPUs ...
[    0.032000] x86: Booting SMP configuration:
[    0.032000] .... node  #0, CPUs:      #1
[    0.032000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.032000]  #2 #3
[    0.036059] smp: Brought up 1 node, 4 CPUs
[    0.036059] smpboot: Max logical packages: 2
[    0.036059] smpboot: Total of 4 processors activated (30537.77 BogoMIPS)
[    0.040087] devtmpfs: initialized
[    0.040087] x86/mm: Memory block size: 128MB
[    0.040464] evm: security.selinux
[    0.040464] evm: security.SMACK64
[    0.040465] evm: security.SMACK64EXEC
[    0.040465] evm: security.SMACK64TRANSMUTE
[    0.040465] evm: security.SMACK64MMAP
[    0.040466] evm: security.apparmor
[    0.040466] evm: security.ima
[    0.040467] evm: security.capability
[    0.040486] PM: Registering ACPI NVS region [mem 0xcffb0000-0xcffdffff] (196608 bytes)
[    0.040486] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.040486] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.040486] pinctrl core: initialized pinctrl subsystem
[    0.040486] RTC time: 15:00:10, date: 08/14/18
[    0.040486] NET: Registered protocol family 16
[    0.040486] audit: initializing netlink subsys (disabled)
[    0.040486] audit: type=2000 audit(1534258810.040:1): state=initialized audit_enabled=0 res=1
[    0.040486] cpuidle: using governor ladder
[    0.040486] cpuidle: using governor menu
[    0.040486] ACPI: bus type PCI registered
[    0.040486] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.040486] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[    0.040486] PCI: not using MMCONFIG
[    0.040486] PCI: Using configuration type 1 for base access
[    0.040486] PCI: Using configuration type 1 for extended access
[    0.040486] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.040486] mtrr: probably your BIOS does not setup all CPUs.
[    0.040486] mtrr: corrected configuration.
[    0.041325] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.041325] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.041325] ACPI: Added _OSI(Module Device)
[    0.041325] ACPI: Added _OSI(Processor Device)
[    0.041325] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.041325] ACPI: Added _OSI(Processor Aggregator Device)
[    0.041325] ACPI: Executed 1 blocks of module-level executable AML code
[    0.047426] ACPI: Interpreter enabled
[    0.047444] ACPI: (supports S0 S1 S3 S4 S5)
[    0.047445] ACPI: Using IOAPIC for interrupt routing
[    0.047469] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[    0.048727] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in ACPI motherboard resources
[    0.048737] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.049040] ACPI: Enabled 10 GPEs in block 00 to 1F
[    0.057826] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.057830] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.058134] acpi PNP0A03:00: _OSC: platform does not support [PCIeHotplug PCIeCapability]
[    0.058284] acpi PNP0A03:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[    0.058286] acpi PNP0A03:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[    0.058287] acpi PNP0A03:00: _OSC: platform willing to grant [PME AER]
[    0.058288] acpi PNP0A03:00: _OSC failed (AE_SUPPORT); disabling ASPM
[    0.058299] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge
[    0.058537] PCI host bridge to bus 0000:00
[    0.058539] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.058540] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.058541] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.058542] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[    0.058544] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xefffffff window]
[    0.058545] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfebfffff window]
[    0.058546] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.058563] pci 0000:00:00.0: [10de:03e2] type 00 class 0x050000
[    0.058771] pci 0000:00:01.0: [10de:03e1] type 00 class 0x060100
[    0.058779] pci 0000:00:01.0: reg 0x10: [io  0x0900-0x09ff]
[    0.058860] pci 0000:00:01.1: [10de:03eb] type 00 class 0x0c0500
[    0.058870] pci 0000:00:01.1: reg 0x10: [io  0x0e00-0x0e3f]
[    0.058885] pci 0000:00:01.1: reg 0x20: [io  0x0600-0x063f]
[    0.058889] pci 0000:00:01.1: reg 0x24: [io  0x0700-0x073f]
[    0.058915] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.058976] pci 0000:00:01.2: [10de:03f5] type 00 class 0x050000
[    0.059054] pci 0000:00:02.0: [10de:03f1] type 00 class 0x0c0310
[    0.059064] pci 0000:00:02.0: reg 0x10: [mem 0xebfff000-0xebffffff]
[    0.059099] pci 0000:00:02.0: supports D1 D2
[    0.059100] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.059156] pci 0000:00:02.1: [10de:03f2] type 00 class 0x0c0320
[    0.059166] pci 0000:00:02.1: reg 0x10: [mem 0xebffec00-0xebffecff]
[    0.059205] pci 0000:00:02.1: supports D1 D2
[    0.059206] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.059270] pci 0000:00:04.0: [10de:03f3] type 01 class 0x060401
[    0.059352] pci 0000:00:05.0: [10de:03f0] type 00 class 0x040300
[    0.059362] pci 0000:00:05.0: reg 0x10: [mem 0xebff8000-0xebffbfff]
[    0.059402] pci 0000:00:05.0: PME# supported from D3hot D3cold
[    0.059465] pci 0000:00:06.0: [10de:03ec] type 00 class 0x01018a
[    0.059488] pci 0000:00:06.0: reg 0x20: [io  0xffa0-0xffaf]
[    0.059497] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.059498] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.059499] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.059500] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.059565] pci 0000:00:07.0: [10de:03ef] type 00 class 0x068000
[    0.059574] pci 0000:00:07.0: reg 0x10: [mem 0xebffd000-0xebffdfff]
[    0.059578] pci 0000:00:07.0: reg 0x14: [io  0xd080-0xd087]
[    0.059609] pci 0000:00:07.0: supports D1 D2
[    0.059610] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.059673] pci 0000:00:08.0: [10de:03f6] type 00 class 0x010185
[    0.059681] pci 0000:00:08.0: reg 0x10: [io  0xd000-0xd007]
[    0.059684] pci 0000:00:08.0: reg 0x14: [io  0xcc00-0xcc03]
[    0.059687] pci 0000:00:08.0: reg 0x18: [io  0xc880-0xc887]
[    0.059691] pci 0000:00:08.0: reg 0x1c: [io  0xc800-0xc803]
[    0.059694] pci 0000:00:08.0: reg 0x20: [io  0xc480-0xc48f]
[    0.059698] pci 0000:00:08.0: reg 0x24: [mem 0xebffc000-0xebffcfff]
[    0.059767] pci 0000:00:08.1: [10de:03f6] type 00 class 0x010185
[    0.059775] pci 0000:00:08.1: reg 0x10: [io  0xc400-0xc407]
[    0.059778] pci 0000:00:08.1: reg 0x14: [io  0xc080-0xc083]
[    0.059782] pci 0000:00:08.1: reg 0x18: [io  0xc000-0xc007]
[    0.059785] pci 0000:00:08.1: reg 0x1c: [io  0xbc00-0xbc03]
[    0.059789] pci 0000:00:08.1: reg 0x20: [io  0xb880-0xb88f]
[    0.059792] pci 0000:00:08.1: reg 0x24: [mem 0xebff7000-0xebff7fff]
[    0.059868] pci 0000:00:09.0: [10de:03e8] type 01 class 0x060400
[    0.059898] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.059960] pci 0000:00:0b.0: [10de:03e9] type 01 class 0x060400
[    0.059987] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.060050] pci 0000:00:0c.0: [10de:03e9] type 01 class 0x060400
[    0.060077] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.060148] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
[    0.060208] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
[    0.060264] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
[    0.060321] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
[    0.060379] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
[    0.060435] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
[    0.060544] pci 0000:00:04.0: PCI bridge to [bus 01] (subtractive decode)
[    0.060548] pci 0000:00:04.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.060549] pci 0000:00:04.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.060550] pci 0000:00:04.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.060551] pci 0000:00:04.0:   bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[    0.060553] pci 0000:00:04.0:   bridge window [mem 0xd0000000-0xefffffff window] (subtractive decode)
[    0.060554] pci 0000:00:04.0:   bridge window [mem 0xf8000000-0xfebfffff window] (subtractive decode)
[    0.060595] pci 0000:02:00.0: [10de:0421] type 00 class 0x030000
[    0.060609] pci 0000:02:00.0: reg 0x10: [mem 0xef000000-0xefffffff]
[    0.060617] pci 0000:02:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.060625] pci 0000:02:00.0: reg 0x1c: [mem 0xec000000-0xedffffff 64bit]
[    0.060630] pci 0000:02:00.0: reg 0x24: [io  0xec00-0xec7f]
[    0.060635] pci 0000:02:00.0: reg 0x30: [mem 0xeefe0000-0xeeffffff pref]
[    0.060640] pci 0000:02:00.0: enabling Extended Tags
[    0.072020] pci 0000:00:09.0: PCI bridge to [bus 02]
[    0.072023] pci 0000:00:09.0:   bridge window [io  0xe000-0xefff]
[    0.072025] pci 0000:00:09.0:   bridge window [mem 0xec000000-0xefffffff]
[    0.072028] pci 0000:00:09.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.072069] pci 0000:00:0b.0: PCI bridge to [bus 03]
[    0.072095] pci 0000:00:0c.0: PCI bridge to [bus 04]
[    0.072830] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[    0.072965] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[    0.073097] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[    0.073229] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    0.073361] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
[    0.073492] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
[    0.073623] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[    0.073757] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10
[    0.073891] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10
[    0.074025] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
[    0.074160] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10
[    0.074293] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10
[    0.074425] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
[    0.074560] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[    0.074692] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
[    0.074825] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
[    0.074958] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *5
[    0.075105] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
« Ostatnia zmiana: Sierpień 14, 2018, 15:20:02 pm wysłana przez vega »

Offline vega

  • Miętowe nasionko
  • *
  • Wiadomości: 5
  • Punkty: 0
Odp: Nie mogę się połączyć z internetem po zmianie procesora
« Odpowiedź #5 dnia: Sierpień 14, 2018, 15:21:16 pm »
I następna część bo w pierwszym wpisie nie mogłem przekroczyć 40000 znaków:
[    0.075358] SCSI subsystem initialized
[    0.075372] libata version 3.00 loaded.
[    0.075372] pci 0000:02:00.0: vgaarb: setting as boot VGA device
[    0.075372] pci 0000:02:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.075372] pci 0000:02:00.0: vgaarb: bridge control possible
[    0.075372] vgaarb: loaded
[    0.075372] ACPI: bus type USB registered
[    0.075372] usbcore: registered new interface driver usbfs
[    0.075372] usbcore: registered new interface driver hub
[    0.075372] usbcore: registered new device driver usb
[    0.075372] EDAC MC: Ver: 3.0.0
[    0.075372] PCI: Using ACPI for IRQ routing
[    0.076752] PCI: pci_cache_line_size set to 64 bytes
[    0.076781] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[    0.076782] e820: reserve RAM buffer [mem 0xcffa0000-0xcfffffff]
[    0.076783] e820: reserve RAM buffer [mem 0x12f000000-0x12fffffff]
[    0.076870] NetLabel: Initializing
[    0.076871] NetLabel:  domain hash size = 128
[    0.076871] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.076883] NetLabel:  unlabeled traffic allowed by default
[    0.076899] clocksource: Switched to clocksource refined-jiffies
[    0.092002] VFS: Disk quotas dquot_6.6.0
[    0.092002] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.092002] AppArmor: AppArmor Filesystem Enabled
[    0.092002] pnp: PnP ACPI init
[    0.092002] pnp 00:00: [dma 3]
[    0.092002] pnp 00:00: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.092002] system 00:01: [io  0x04d0-0x04d1] has been reserved
[    0.092002] system 00:01: [io  0x0500-0x057f] has been reserved
[    0.092002] system 00:01: [io  0x0580-0x05ff] has been reserved
[    0.092002] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.092002] system 00:01: [io  0x0880-0x08ff] has been reserved
[    0.092002] system 00:01: [io  0x0d00-0x0d7f] has been reserved
[    0.092002] system 00:01: [io  0x0d80-0x0dff] has been reserved
[    0.092002] system 00:01: [io  0x1100-0x117f] has been reserved
[    0.092002] system 00:01: [io  0x1180-0x11ff] has been reserved
[    0.092002] system 00:01: [mem 0x000d0000-0x000d3fff window] has been reserved
[    0.092002] system 00:01: [mem 0x000d4000-0x000d7fff window] has been reserved
[    0.092002] system 00:01: [mem 0x000de000-0x000dffff window] has been reserved
[    0.092002] system 00:01: [mem 0xfec80000-0xfecfffff] has been reserved
[    0.092002] system 00:01: [mem 0xfefe0000-0xfefe01ff] has been reserved
[    0.092002] system 00:01: [mem 0xfefe1000-0xfefe1fff] has been reserved
[    0.092002] system 00:01: [mem 0xfee01000-0xfeefffff] has been reserved
[    0.092002] system 00:01: [mem 0xffb80000-0xffffffff] could not be reserved
[    0.092002] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.092002] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.092002] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.092002] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.092002] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.092002] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.092114] pnp 00:05: [dma 0 disabled]
[    0.092164] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.092305] system 00:06: [io  0x0280-0x028f] has been reserved
[    0.092307] system 00:06: [io  0x0290-0x029f] has been reserved
[    0.092310] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.092388] system 00:07: [mem 0xf0000000-0xf7ffffff] has been reserved
[    0.092391] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.092585] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.092587] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.092588] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.092590] system 00:08: [mem 0x00100000-0xcfffffff] could not be reserved
[    0.092591] system 00:08: [mem 0xfec00000-0xffffffff] could not be reserved
[    0.092595] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.092920] pnp: PnP ACPI: found 9 devices
[    0.099010] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.100003] clocksource: Switched to clocksource acpi_pm
[    0.100003] pci 0000:00:04.0: PCI bridge to [bus 01]
[    0.100003] pci 0000:00:09.0: PCI bridge to [bus 02]
[    0.100003] pci 0000:00:09.0:   bridge window [io  0xe000-0xefff]
[    0.100003] pci 0000:00:09.0:   bridge window [mem 0xec000000-0xefffffff]
[    0.100003] pci 0000:00:09.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.100003] pci 0000:00:0b.0: PCI bridge to [bus 03]
[    0.100003] pci 0000:00:0c.0: PCI bridge to [bus 04]
[    0.100003] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.100003] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.100003] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.100003] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.100003] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xefffffff window]
[    0.100003] pci_bus 0000:00: resource 9 [mem 0xf8000000-0xfebfffff window]
[    0.100003] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7 window]
[    0.100003] pci_bus 0000:01: resource 5 [io  0x0d00-0xffff window]
[    0.100003] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.100003] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.100003] pci_bus 0000:01: resource 8 [mem 0xd0000000-0xefffffff window]
[    0.100003] pci_bus 0000:01: resource 9 [mem 0xf8000000-0xfebfffff window]
[    0.100003] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.100003] pci_bus 0000:02: resource 1 [mem 0xec000000-0xefffffff]
[    0.100003] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.100003] NET: Registered protocol family 2
[    0.100017] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.100017] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.100017] TCP: Hash tables configured (established 32768 bind 32768)
[    0.100017] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.100017] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.100017] NET: Registered protocol family 1
[    0.101174] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[    0.180364] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[    0.180479] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.180523] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.180574] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.180623] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.180672] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.180724] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.180779] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.180837] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.180855] pci 0000:02:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.180857] PCI: CLS 64 bytes, default 64
[    0.180894] Unpacking initramfs...
[    0.911597] Freeing initrd memory: 56432K
[    0.912335] PCI-DMA: Disabling AGP.
[    0.912426] PCI-DMA: aperture base @ c4000000 size 65536 KB
[    0.912426] PCI-DMA: using GART IOMMU.
[    0.912428] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    0.915747] amd_uncore: AMD NB counters detected
[    0.915894] LVT offset 0 assigned for vector 0x400
[    0.915985] perf: AMD IBS detected (0x000000ff)
[    0.916056] Scanning for low memory corruption every 60 seconds
[    0.916685] Initialise system trusted keyrings
[    0.916692] Key type blacklist registered
[    0.916739] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[    0.917909] zbud: loaded
[    0.918343] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.918508] fuse init (API version 7.26)
[    0.920581] Key type asymmetric registered
[    0.920582] Asymmetric key parser 'x509' registered
[    0.920607] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    0.920662] io scheduler noop registered
[    0.920664] io scheduler deadline registered
[    0.920704] io scheduler cfq registered (default)
[    0.921135] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[    0.921136] vesafb: scrolling: redraw
[    0.921137] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.921146] vesafb: framebuffer at 0xed000000, mapped to 0x00000000c339c60a, using 5120k, total 5120k
[    0.921236] Console: switching to colour frame buffer device 160x64
[    0.921257] fb0: VESA VGA frame buffer device
[    0.921340] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.921349] ACPI: Power Button [PWRB]
[    0.921384] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.921417] ACPI: Power Button [PWRF]
[    0.921836] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.942290] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.944444] Linux agpgart interface v0.103
[    0.946003] loop: module loaded
[    0.946227] libphy: Fixed MDIO Bus: probed
[    0.946227] tun: Universal TUN/TAP device driver, 1.6
[    0.946266] PPP generic driver version 2.4.2
[    0.946310] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.946312] ehci-pci: EHCI PCI platform driver
[    0.946461] ehci-pci 0000:00:02.1: EHCI Host Controller
[    0.946467] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[    0.946476] ehci-pci 0000:00:02.1: debug port 1
[    0.946503] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[    0.946521] ehci-pci 0000:00:02.1: irq 22, io mem 0xebffec00
[    0.964107] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    0.964225] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.964229] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.964233] usb usb1: Product: EHCI Host Controller
[    0.964235] usb usb1: Manufacturer: Linux 4.15.0-20-generic ehci_hcd
[    0.964238] usb usb1: SerialNumber: 0000:00:02.1
[    0.964379] hub 1-0:1.0: USB hub found
[    0.964386] hub 1-0:1.0: 10 ports detected
[    0.964590] ehci-platform: EHCI generic platform driver
[    0.964598] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.964600] ohci-pci: OHCI PCI platform driver
[    0.964710] ohci-pci 0000:00:02.0: OHCI PCI host controller
[    0.964714] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[    0.964740] ohci-pci 0000:00:02.0: irq 23, io mem 0xebfff000
[    1.026105] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.026107] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.026108] usb usb2: Product: OHCI PCI host controller
[    1.026109] usb usb2: Manufacturer: Linux 4.15.0-20-generic ohci_hcd
[    1.026110] usb usb2: SerialNumber: 0000:00:02.0
[    1.026259] hub 2-0:1.0: USB hub found
[    1.026266] hub 2-0:1.0: 10 ports detected
[    1.026439] ohci-platform: OHCI generic platform driver
[    1.026447] uhci_hcd: USB Universal Host Controller Interface driver
[    1.026497] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    1.026498] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.027165] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.027301] mousedev: PS/2 mouse device common for all mice
[    1.027464] rtc_cmos 00:02: RTC can wake from S4
[    1.027619] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.027652] rtc_cmos 00:02: alarms up to one year, y3k, 114 bytes nvram
[    1.027658] i2c /dev entries driver
[    1.027700] device-mapper: uevent: version 1.0.3
[    1.027771] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: [email protected]
[    1.027880] ledtrig-cpu: registered to indicate activity on CPUs
[    1.028286] NET: Registered protocol family 10
[    1.031457] Segment Routing with IPv6
[    1.031472] NET: Registered protocol family 17
[    1.031541] Key type dns_resolver registered
[    1.031791] RAS: Correctable Errors collector initialized.
[    1.031956] microcode: CPU0: patch_level=0x00000000
[    1.031963] microcode: CPU1: patch_level=0x00000000
[    1.031974] microcode: CPU2: patch_level=0x00000000
[    1.031986] microcode: CPU3: patch_level=0x00000000
[    1.032053] microcode: Microcode Update Driver: v2.2.
[    1.032060] sched_clock: Marking stable (1032049008, 0)->(1114472873, -82423865)
[    1.032377] registered taskstats version 1
[    1.032386] Loading compiled-in X.509 certificates
[    1.034674] Loaded X.509 cert 'Build time autogenerated kernel key: f4ad6a5babf67650e4ceb385fa5dda8e4a178208'
[    1.034698] zswap: loaded using pool lzo/zbud
[    1.037560] Key type big_key registered
[    1.037564] Key type trusted registered
[    1.038923] Key type encrypted registered
[    1.038926] AppArmor: AppArmor sha1 policy hashing enabled
[    1.038928] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    1.038944] evm: HMAC attrs: 0x1
[    1.039154]   Magic number: 14:615:32
[    1.039276] rtc_cmos 00:02: setting system clock to 2018-08-14 15:00:11 UTC (1534258811)
[    1.039468] acpi_cpufreq: overriding BIOS provided _PSD data
[    1.039632] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.039632] EDD information not available.
[    1.042934] Freeing unused kernel memory: 2404K
[    1.042936] Write protecting the kernel read-only data: 20480k
[    1.043890] Freeing unused kernel memory: 2008K
[    1.048124] Freeing unused kernel memory: 1904K
[    1.053156] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    1.055184] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.121519] i2c i2c-0: nForce2 SMBus adapter at 0x600
[    1.121524] ACPI Warning: SystemIO range 0x0000000000000700-0x000000000000073F conflicts with OpRegion 0x0000000000000700-0x000000000000073F (\_SB.PCI0.SM00) (20170831/utaddress-247)
[    1.121529] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    1.123368] pata_amd 0000:00:06.0: version 0.4.1
[    1.124796] scsi host0: pata_amd
[    1.132052] scsi host1: pata_amd
[    1.132118] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    1.132119] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    1.132337] sata_nv 0000:00:08.0: version 3.5
[    1.132857] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[    1.140035] scsi host2: sata_nv
[    1.143125] scsi host3: sata_nv
[    1.143171] ata3: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc480 irq 21
[    1.143173] ata4: SATA max UDMA/133 cmd 0xc880 ctl 0xc800 bmdma 0xc488 irq 21
[    1.143553] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
[    1.143856] scsi host4: sata_nv
[    1.143955] scsi host5: sata_nv
[    1.143989] ata5: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xb880 irq 20
[    1.143991] ata6: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb888 irq 20
[    1.144259] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    1.144596] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
[    1.180157] ACPI: PCI Interrupt Link [LNED] enabled at IRQ 19
[    1.180238] checking generic (ed000000 500000) vs hw (d0000000 10000000)
[    1.180238] checking generic (ed000000 500000) vs hw (ec000000 2000000)
[    1.180239] fb: switching to nouveaufb from VESA VGA
[    1.180262] Console: switching to colour dummy device 80x25
[    1.180377] nouveau 0000:02:00.0: NVIDIA G86 (086100a2)
[    1.284092] nouveau 0000:02:00.0: bios: version 60.86.18.00.00
[    1.285115] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 3, addr bc:5f:f4:63:b7:2e
[    1.285117] forcedeth 0000:00:07.0: highdma pwrctl mgmt gbit lnktim msi desc-v3
[    1.285724] nouveau 0000:02:00.0: i2c: ccb 08 was ignored
[    1.285725] nouveau 0000:02:00.0: i2c: ccb 09 was ignored
[    1.285726] nouveau 0000:02:00.0: i2c: ccb 0a was ignored
[    1.285727] nouveau 0000:02:00.0: i2c: ccb 0b was ignored
[    1.286048] forcedeth 0000:00:07.0 enp0s7: renamed from eth0
[    1.306747] nouveau 0000:02:00.0: bios: M0203T not found
[    1.306749] nouveau 0000:02:00.0: bios: M0203E not matched!
[    1.306750] nouveau 0000:02:00.0: fb: 256 MiB DDR2
[    1.340355] [TTM] Zone  kernel: Available graphics memory: 2011342 kiB
[    1.340356] [TTM] Initializing pool allocator
[    1.340359] [TTM] Initializing DMA pool allocator
[    1.340371] nouveau 0000:02:00.0: DRM: VRAM: 256 MiB
[    1.340372] nouveau 0000:02:00.0: DRM: GART: 1048576 MiB
[    1.340375] nouveau 0000:02:00.0: DRM: TMDS table version 2.0
[    1.340376] nouveau 0000:02:00.0: DRM: DCB version 4.0
[    1.340378] nouveau 0000:02:00.0: DRM: DCB outp 00: 02000300 00000028
[    1.340380] nouveau 0000:02:00.0: DRM: DCB outp 01: 02011312 00020010
[    1.340381] nouveau 0000:02:00.0: DRM: DCB outp 02: 04011310 00000028
[    1.340383] nouveau 0000:02:00.0: DRM: DCB outp 03: 010223f1 00c0c080
[    1.340384] nouveau 0000:02:00.0: DRM: DCB outp 04: 01000302 00000030
[    1.340385] nouveau 0000:02:00.0: DRM: DCB conn 00: 0000
[    1.340386] nouveau 0000:02:00.0: DRM: DCB conn 01: 2130
[    1.340387] nouveau 0000:02:00.0: DRM: DCB conn 02: 0210
[    1.340388] nouveau 0000:02:00.0: DRM: DCB conn 03: 0211
[    1.340389] nouveau 0000:02:00.0: DRM: DCB conn 04: 0213
[    1.340424] nouveau 0000:02:00.0: disp: conn 01:0130: func 08 lookup failed, -2
[    1.341628] nouveau 0000:02:00.0: DRM: failed to create encoder 0/1/0: -19
[    1.341631] nouveau 0000:02:00.0: DRM: TV-1 has no encoders, removing
[    1.341674] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.341675] [drm] Driver supports precise vblank timestamp query.
[    1.344041] usb 1-2: new high-speed USB device number 2 using ehci-pci
[    1.378967] ata1.00: ATAPI: HL-DT-STDVD-RAM GH22LP20, 2.00, max UDMA/66
[    1.379409] ata1.01: ATA-6: ST340014A, 8.01, max UDMA/100
[    1.379410] ata1.01: 78165360 sectors, multi 16: LBA48
[    1.379416] ata1: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5c60000) ACPI=0x1f01f (30:20:0x15)
[    1.379418] ata1: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc5c60000) ACPI=0x3f01f (30:20:0x15)
[    1.384211] ata1.00: configured for UDMA/66
[    1.408525] ata1.01: configured for UDMA/100
[    1.410757] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVD-RAM GH22LP20 2.00 PQ: 0 ANSI: 5
[    1.465488] ata3: SATA link down (SStatus 0 SControl 300)
[    1.473787] ata5: SATA link down (SStatus 0 SControl 300)
[    1.485787] sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.485789] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.485947] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.486053] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    1.487311] scsi 0:0:1:0: Direct-Access     ATA      ST340014A        8.01 PQ: 0 ANSI: 5
[    1.487550] sd 0:0:1:0: Attached scsi generic sg1 type 0
[    1.487626] ata2: port disabled--ignoring
[    1.505310] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608
[    1.505312] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.505313] usb 1-2: Product: USB2.0 Hub
[    1.505707] hub 1-2:1.0: USB hub found
[    1.506056] hub 1-2:1.0: 4 ports detected
[    1.552591] sd 0:0:1:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.3 GiB)
[    1.552617] sd 0:0:1:0: [sda] Write Protect is off
[    1.552619] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
[    1.552664] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.593153]  sda: sda1 sda2 sda3
[    1.593781] nouveau 0000:02:00.0: DRM: MM: using CRYPT for buffer copies
[    1.633741] nouveau 0000:02:00.0: DRM: allocated 1280x1024 fb: 0x50000, bo 000000002f5fba42
[    1.663838] fbcon: nouveaufb (fb0) is primary device
[    1.663889] Console: switching to colour frame buffer device 160x64
[    1.663909] nouveau 0000:02:00.0: fb0: nouveaufb frame buffer device
[    1.680068] [drm] Initialized nouveau 1.3.1 20120801 for 0000:02:00.0 on minor 0
[    1.809522] ata4: SATA link down (SStatus 0 SControl 300)
[    1.837109] sd 0:0:1:0: [sda] Attached SCSI disk
[    1.896110] usb 2-4: new low-speed USB device number 2 using ohci-pci
[    1.916133] tsc: Refined TSC clocksource calibration: 3817.366 MHz
[    1.916152] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6e0cda620ae, max_idle_ns: 881590777860 ns
[    2.133390] ata6: SATA link down (SStatus 0 SControl 300)
[    2.136099] usb 2-4: New USB device found, idVendor=18f8, idProduct=0f97
[    2.136101] usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.136102] usb 2-4: Product: USB OPTICAL MOUSE
[    2.141975] hidraw: raw HID events driver (C) Jiri Kosina
[    2.157457] usbcore: registered new interface driver usbhid
[    2.157458] usbhid: USB HID core driver
[    2.159210] input: USB OPTICAL MOUSE  as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/0003:18F8:0F97.0001/input/input3
[    2.159332] hid-generic 0003:18F8:0F97.0001: input,hidraw0: USB HID v1.10 Mouse [USB OPTICAL MOUSE ] on usb-0000:00:02.0-4/input0
[    2.159577] input: USB OPTICAL MOUSE  as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.1/0003:18F8:0F97.0002/input/input4
[    2.216389] hid-generic 0003:18F8:0F97.0002: input,hiddev0,hidraw1: USB HID v1.10 Keyboard [USB OPTICAL MOUSE ] on usb-0000:00:02.0-4/input1
[    2.940258] clocksource: Switched to clocksource tsc
[    3.052051] raid6: sse2x1   gen()  6738 MB/s
[    3.100043] raid6: sse2x1   xor()  4411 MB/s
[    3.148048] raid6: sse2x2   gen() 10121 MB/s
[    3.196045] raid6: sse2x2   xor()  7009 MB/s
[    3.244034] raid6: sse2x4   gen() 12303 MB/s
[    3.292049] raid6: sse2x4   xor()  6108 MB/s
[    3.292050] raid6: using algorithm sse2x4 gen() 12303 MB/s
[    3.292050] raid6: .... xor() 6108 MB/s, rmw enabled
[    3.292051] raid6: using ssse3x2 recovery algorithm
[    3.294966] xor: automatically using best checksumming function   avx       
[    3.311599] Btrfs loaded, crc32c=crc32c-intel
[    4.070301] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    4.915691] random: crng init done
[    5.497499] ip_tables: (C) 2000-2006 Netfilter Core Team
[    5.591849] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    5.608160] systemd[1]: Detected architecture x86-64.
[    5.620788] systemd[1]: Set hostname to <user>.
[    8.213760] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    8.213783] systemd[1]: Reached target System Time Synchronized.
[    8.213939] systemd[1]: Created slice System Slice.
[    8.214052] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    8.214102] systemd[1]: Listening on LVM2 poll daemon socket.
[    8.214148] systemd[1]: Listening on Journal Socket (/dev/log).
[    8.214185] systemd[1]: Listening on LVM2 metadata daemon socket.
[    8.955136] lp: driver loaded but no devices found
[    9.026535] ppdev: user-space parallel port driver
[    9.039039] parport_pc 00:00: reported by Plug and Play ACPI
[    9.039097] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[    9.136271] lp0: using parport0 (interrupt-driven).
[    9.179912] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    9.680631] systemd-journald[360]: Received request to flush runtime journal from PID 1
[   11.207045] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   11.824353] fam15h_power 0000:00:18.4: Bogus value for ProcessorPwrWatts (processor_pwr_watts>=21631)
[   12.965144] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
[   12.965151] snd_hda_intel 0000:00:05.0: Disabling MSI
[   13.121198] AVX version of gcm_enc/dec engaged.
[   13.121199] AES CTR mode by8 optimization enabled
[   13.305142] Adding 511996k swap on /dev/sda3.  Priority:-2 extents:1 across:511996k FS
[   13.513723] kvm: Nested Virtualization enabled
[   13.513726] kvm: Nested Paging enabled
[   13.629997] MCE: In-kernel MCE decoding enabled.
[   13.645439] EDAC amd64: Node 0: DRAM ECC disabled.
[   13.645441] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[   13.688527] EDAC amd64: Node 0: DRAM ECC disabled.
[   13.688529] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[   13.740534] EDAC amd64: Node 0: DRAM ECC disabled.
[   13.740535] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[   13.852119] snd_hda_codec_via hdaudioC0D0: autoconfig for VT1705: line_outs=1 (0x1c/0x0/0x0/0x0/0x0) type:line
[   13.852124] snd_hda_codec_via hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   13.852128] snd_hda_codec_via hdaudioC0D0:    hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
[   13.852130] snd_hda_codec_via hdaudioC0D0:    mono: mono_out=0x0
[   13.852133] snd_hda_codec_via hdaudioC0D0:    inputs:
[   13.852137] snd_hda_codec_via hdaudioC0D0:      Rear Mic=0x1a
[   13.852140] snd_hda_codec_via hdaudioC0D0:      Front Mic=0x1e
[   13.852143] snd_hda_codec_via hdaudioC0D0:      Line=0x1b
[   13.852146] snd_hda_codec_via hdaudioC0D0:      CD=0x1f
[   14.061781] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[   15.200562] audit: type=1400 audit(1534258825.656:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=623 comm="apparmor_parser"
[   15.200566] audit: type=1400 audit(1534258825.656:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=623 comm="apparmor_parser"
[   15.200569] audit: type=1400 audit(1534258825.656:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=623 comm="apparmor_parser"
[   15.251356] audit: type=1400 audit(1534258825.704:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=624 comm="apparmor_parser"
[   15.262224] audit: type=1400 audit(1534258825.716:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=621 comm="apparmor_parser"
[   15.262227] audit: type=1400 audit(1534258825.716:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=621 comm="apparmor_parser"
[   15.262230] audit: type=1400 audit(1534258825.716:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=621 comm="apparmor_parser"
[   15.262233] audit: type=1400 audit(1534258825.716:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=621 comm="apparmor_parser"
[   15.292996] audit: type=1400 audit(1534258825.748:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=627 comm="apparmor_parser"
[   15.300685] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input5
[   15.300753] input: HDA NVidia Line as /devices/pci0000:00/0000:00:05.0/sound/card0/input6
[   15.300806] input: HDA NVidia Line Out as /devices/pci0000:00/0000:00:05.0/sound/card0/input7
[   15.305743] audit: type=1400 audit(1534258825.760:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=628 comm="apparmor_parser"
[   27.201413] IPv6: ADDRCONF(NETDEV_UP): enp0s7: link is not ready
[   27.201908] forcedeth 0000:00:07.0 enp0s7: MSI enabled
[   27.202684] IPv6: ADDRCONF(NETDEV_UP): enp0s7: link is not ready
[   27.202689] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s7: link becomes ready
[   32.988079] ------------[ cut here ]------------
[   32.988084] NETDEV WATCHDOG: enp0s7 (forcedeth): transmit queue 0 timed out
[   32.988142] WARNING: CPU: 3 PID: 0 at /build/linux-5s7Xkn/linux-4.15.0/net/sched/sch_generic.c:323 dev_watchdog+0x221/0x230
[   32.988143] Modules linked in: snd_hda_codec_via snd_hda_codec_generic edac_mce_amd kvm_amd kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep joydev aes_x86_64 snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device snd_timer crypto_simd input_leds glue_helper serio_raw k10temp fam15h_power cryptd snd soundcore shpchp mac_hid sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 btrfs xor zstd_compress raid6_pq dm_mirror dm_region_hash dm_log hid_generic usbhid hid nouveau mxm_wmi wmi video i2c_algo_bit ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops pata_acpi drm forcedeth sata_nv pata_amd i2c_nforce2
[   32.988216] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.15.0-20-generic #21-Ubuntu
[   32.988217] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./N68C-GS FX, BIOS P1.40 10/31/2012
[   32.988223] RIP: 0010:dev_watchdog+0x221/0x230
[   32.988225] RSP: 0018:ffff95fa2ecc3e58 EFLAGS: 00010286
[   32.988228] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000006
[   32.988230] RDX: 0000000000000007 RSI: 0000000000000092 RDI: ffff95fa2ecd6490
[   32.988232] RBP: ffff95fa2ecc3e88 R08: 0000000000000001 R09: 00000000000002fa
[   32.988234] R10: ffff95fa2ecc3ee8 R11: 0000000000000000 R12: 0000000000000001
[   32.988236] R13: ffff95fa1e456000 R14: ffff95fa1e456478 R15: ffff95fa1deb2c80
[   32.988239] FS:  0000000000000000(0000) GS:ffff95fa2ecc0000(0000) knlGS:0000000000000000
[   32.988241] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   32.988243] CR2: 00007ffa35c11120 CR3: 000000011dbe4000 CR4: 00000000000406e0
[   32.988245] Call Trace:
[   32.988248]  <IRQ>
[   32.988255]  ? dev_deactivate_queue.constprop.33+0x60/0x60
[   32.988260]  call_timer_fn+0x30/0x130
[   32.988265]  run_timer_softirq+0x3fb/0x450
[   32.988269]  ? ktime_get+0x43/0xa0
[   32.988273]  ? lapic_next_event+0x20/0x30
[   32.988278]  __do_softirq+0xdf/0x2b2
[   32.988283]  irq_exit+0xb6/0xc0
[   32.988287]  smp_apic_timer_interrupt+0x71/0x130
[   32.988291]  apic_timer_interrupt+0x84/0x90
[   32.988293]  </IRQ>
[   32.988303] RIP: 0010:cpuidle_enter_state+0xa7/0x2f0
[   32.988304] RSP: 0018:ffffaaa3406afe68 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff11
[   32.988305] RAX: ffff95fa2ece2880 RBX: 00000007ae3de846 RCX: 000000000000001f
[   32.988306] RDX: 00000007ae3de846 RSI: fffffffa0acaa796 RDI: 0000000000000000
[   32.988306] RBP: ffffaaa3406afea8 R08: 000000000000408b R09: 0000000000000d17
[   32.988307] R10: ffffaaa3406afe38 R11: 0000000000004081 R12: ffff95fa1e9e5000
[   32.988307] R13: 0000000000000002 R14: ffffffffb1780798 R15: 0000000000000000
[   32.988309]  ? cpuidle_enter_state+0x97/0x2f0
[   32.988311]  cpuidle_enter+0x17/0x20
[   32.988313]  call_cpuidle+0x23/0x40
[   32.988314]  do_idle+0x18c/0x1f0
[   32.988316]  cpu_startup_entry+0x73/0x80
[   32.988317]  start_secondary+0x1a6/0x200
[   32.988319]  secondary_startup_64+0xa5/0xb0
[   32.988319] Code: 38 00 49 63 4e e8 eb 92 4c 89 ef c6 05 e7 55 d9 00 01 e8 23 38 fd ff 89 d9 48 89 c2 4c 89 ee 48 c7 c7 40 6d 39 b1 e8 ef 03 81 ff <0f> 0b eb c0 90 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55
[   32.988341] ---[ end trace 77fe5a652010ea43 ]---
[   32.988345] forcedeth 0000:00:07.0 enp0s7: Got tx_timeout. irq status: 00000030
[   42.972054] forcedeth 0000:00:07.0 enp0s7: Got tx_timeout. irq status: 00000030
[   52.956089] forcedeth 0000:00:07.0 enp0s7: Got tx_timeout. irq status: 00000032
[   62.944049] forcedeth 0000:00:07.0 enp0s7: Got tx_timeout. irq status: 00000032
[   82.908085] forcedeth 0000:00:07.0 enp0s7: Got tx_timeout. irq status: 00000032
[  128.988083] forcedeth 0000:00:07.0 enp0s7: Got tx_timeout. irq status: 00000032
[  517.852067] forcedeth 0000:00:07.0 enp0s7: Got tx_timeout. irq status: 00000032

Offline yahoob3

  • Grupa Trzymająca Władzę
  • Wielki miętus
  • *****
  • Wiadomości: 833
  • Punkty: 190
  • Płeć: Mężczyzna
  • Zgryźliwy tetryk
    • Organy Hammonda
Odp: Nie mogę się połączyć z internetem po zmianie procesora
« Odpowiedź #6 dnia: Sierpień 14, 2018, 18:00:25 pm »
OK, ale masz tam masę błędów, związanych głównie z procesorem. Dla mnie to za wysokie progi, może któryś  poweruserów się pochyli nad problemem.
Z tego co wyniuchałem w necie spróbuj (piszę to bez przekonania) tego. Jest jakaś szansa, że karta ruszy:
Cytuj
Step 1: Edit the Grub file.

You will do this by opening up the terminal, going into sudo, and typing


nano /etc/default/grub

You then need to edit a single line to add "iommu=soft". It should look like


GRUB_CMDLINE_LINUX="iommu=soft"

Save the file.

Step 2: Change the BIOS

Restart your computer and enter the BIOS.

Navigate to the peripherals section and disable IOMMU.

Save and exit.
Ja bym do tego dodał oczywiście
sudo update-grub po kroku pierwszym.
Być może upgrade BIOSu też coś by pomógł.
Poczekaj, jak pisałem wyżej, może jakiś PU coś podpowie więcej.

Spróbuj jeszcze tego:
echo options forcedeth msi=0 msix=0 >>/etc/modprobe.d/options.conf
update-initramfs -u
sudo reboot
« Ostatnia zmiana: Sierpień 14, 2018, 18:29:03 pm wysłana przez yahoob3 »
Mint 18.3 Cinnamon, kern. 4.10; 64-bit na: Lenovo G500S z CPU Pent. 2020M 2.4 GHz*2; 6 GB RAM; GPU Intel+GeForce 720M;
LU#586742

Offline vega

  • Miętowe nasionko
  • *
  • Wiadomości: 5
  • Punkty: 0
Odp: Nie mogę się połączyć z internetem po zmianie procesora
« Odpowiedź #7 dnia: Sierpień 14, 2018, 19:19:32 pm »
Nic niestety to nie daje, chyba będę musiał przejść z powrotem na Debiana tylko Stable, tam wszystko działa. BIOS mam w najnowszej wersji.
« Ostatnia zmiana: Sierpień 14, 2018, 19:22:27 pm wysłana przez vega »