Brak internetu na Lenovo G580

  • 11 replies
  • 5052 views
*

drabowicz

Brak internetu na Lenovo G580
« dnia: Styczeń 08, 2014, 21:30:22 pm »
Witam serdecznie ; )

Ten wpis jest moim pierwszym jak i jednoczesnie wolaniem o pomoc. Jako swiezy uzytkownik linuxa moje umiejetnosci oceniam jako mniej niz poczatkujace. W zwiazku z tym prosze o instrukcje w co i jak klikac oraz pisac - szczegolnie w terminalu, ktory jest dla mnie jeszcze czarna magia. Zalezy mi na tym aby miec dzialajacy internet i po kablu i przez wifi.

Udalo mi sie wyszukac komendy, ktore moga pomoc w znalezieniu rozwiazania.

uname -a
Linux g580 3.2.0-4-486 #1 Debian 3.2.32-1 i686 GNU/Linuxcat /proc/version
Linux version 3.2.0-4-486 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-12) ) #1 Debian 3.2.32-1cat /etc/issue
LMDE Cinnamon Edition \n \llsb_release -a
No LSB modules are available.
Distributor ID: LinuxMint
Description: LMDE Cinnamon Edition
Release: 1
Codename: debian
lu@g580 ~ $ cat /etc/linuxmint/info
RELEASE=1
CODENAME=debian
EDITION="Cinnamon 32-bit"
DESCRIPTION="LMDE Cinnamon Edition"
DESKTOP=Gnome
TOOLKIT=GTK
NEW_FEATURES_URL=http://www.linuxmint.com/rel_debian_whatsnew.php
RELEASE_NOTES_URL=http://www.linuxmint.com/rel_debian.php
USER_GUIDE_URL=http://www.linuxmint.com/documentation.php
GRUB_TITLE=LMDE Cinnamon 32-bit
lu@g580 ~ $ cat /etc/debian_version
wheezy/sid
sudo ifconfig
lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
lspci
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
01:00.0 3D controller: NVIDIA Corporation Device 1140 (rev a1)
02:00.0 Ethernet controller: Atheros Communications Inc. AR8162 Fast Ethernet (rev 10)
03:00.0 Network controller: Broadcom Corporation Device 4365 (rev 01)
« Ostatnia zmiana: Styczeń 08, 2014, 22:30:53 pm wysłana przez drabowicz »

*

Offline dedito

  • ***
  • 241
  • 140
Odp: Brak internetu na Lenovo G580
« Odpowiedź #1 dnia: Styczeń 08, 2014, 22:26:09 pm »
Jeszcze wynik polecenia dmesg, najlepiej bezpośrednio po uruchomieniu komputera.

*

drabowicz

Odp: Brak internetu na Lenovo G580
« Odpowiedź #2 dnia: Styczeń 08, 2014, 22:38:04 pm »
dmesg
[    0.291536] pnp 00:05: [io  0x004e-0x004f]
[    0.291538] pnp 00:05: [io  0x0061]
[    0.291539] pnp 00:05: [io  0x0063]
[    0.291540] pnp 00:05: [io  0x0065]
[    0.291541] pnp 00:05: [io  0x0067]
[    0.291542] pnp 00:05: [io  0x0070]
[    0.291544] pnp 00:05: [io  0x0080]
[    0.291545] pnp 00:05: [io  0x0092]
[    0.291546] pnp 00:05: [io  0x00b2-0x00b3]
[    0.291548] pnp 00:05: [io  0x0680-0x069f]
[    0.291549] pnp 00:05: [io  0x1000-0x100f]
[    0.291550] pnp 00:05: [io  0xffff]
[    0.291552] pnp 00:05: [io  0xffff]
[    0.291553] pnp 00:05: [io  0x0400-0x0453]
[    0.291554] pnp 00:05: [io  0x0458-0x047f]
[    0.291555] pnp 00:05: [io  0x0500-0x057f]
[    0.291557] pnp 00:05: [io  0x164e-0x164f]
[    0.291558] pnp 00:05: [io  0xfd60-0xfd63]
[    0.291586] system 00:05: [io  0x0680-0x069f] has been reserved
[    0.291587] system 00:05: [io  0x1000-0x100f] has been reserved
[    0.291589] system 00:05: [io  0xffff] has been reserved
[    0.291591] system 00:05: [io  0xffff] has been reserved
[    0.291593] system 00:05: [io  0x0400-0x0453] has been reserved
[    0.291594] system 00:05: [io  0x0458-0x047f] has been reserved
[    0.291596] system 00:05: [io  0x0500-0x057f] has been reserved
[    0.291598] system 00:05: [io  0x164e-0x164f] has been reserved
[    0.291600] system 00:05: [io  0xfd60-0xfd63] has been reserved
[    0.291602] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.291607] pnp 00:06: [io  0x0070-0x0077]
[    0.291611] pnp 00:06: [irq 8]
[    0.291625] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.291641] pnp 00:07: [io  0x0454-0x0457]
[    0.291664] system 00:07: [io  0x0454-0x0457] has been reserved
[    0.291667] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.291674] pnp 00:08: [io  0x0060]
[    0.291675] pnp 00:08: [io  0x0064]
[    0.291679] pnp 00:08: [irq 1]
[    0.291693] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.291710] pnp 00:09: [irq 12]
[    0.291727] pnp 00:09: Plug and Play ACPI device, IDs SYN073b SYN0700 SYN0002 PNP0f13 (active)
[    0.338401] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[    0.338403] pnp 00:0a: [mem 0xfed10000-0xfed17fff]
[    0.338404] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
[    0.338406] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
[    0.338407] pnp 00:0a: [mem 0xf0000000-0xf3ffffff]
[    0.338409] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
[    0.338410] pnp 00:0a: [mem 0xfed90000-0xfed93fff]
[    0.338411] pnp 00:0a: [mem 0xff000000-0xff000fff]
[    0.338413] pnp 00:0a: [mem 0xff010000-0xffffffff]
[    0.338414] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
[    0.338415] pnp 00:0a: [mem 0xbfa00000-0xbfa00fff]
[    0.338445] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.338447] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.338449] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.338451] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.338453] system 00:0a: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.338455] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.338457] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.338459] system 00:0a: [mem 0xff000000-0xff000fff] has been reserved
[    0.338461] system 00:0a: [mem 0xff010000-0xffffffff] could not be reserved
[    0.338463] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.338464] system 00:0a: [mem 0xbfa00000-0xbfa00fff] has been reserved
[    0.338467] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.338701] pnp 00:0b: [mem 0x20000000-0x201fffff]
[    0.338702] pnp 00:0b: [mem 0x40004000-0x40004fff]
[    0.338737] system 00:0b: [mem 0x20000000-0x201fffff] has been reserved
[    0.338739] system 00:0b: [mem 0x40004000-0x40004fff] has been reserved
[    0.338741] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.338755] pnp: PnP ACPI: found 12 devices
[    0.338756] ACPI: ACPI bus type pnp unregistered
[    0.338758] PnPBIOS: Disabled by ACPI PNP
[    0.374145] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
[    0.374148] PCI: max bus depth: 1 pci_try_num: 2
[    0.374170] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x80000)
[    0.374171] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.374173] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.374176] pci 0000:00:01.0:   bridge window [mem 0xd2000000-0xd2ffffff]
[    0.374178] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.374182] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.374185] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.374190] pci 0000:00:1c.0:   bridge window [mem 0xd3500000-0xd35fffff]
[    0.374198] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    0.374204] pci 0000:00:1c.1:   bridge window [mem 0xd3400000-0xd34fffff]
[    0.374218] pci 0000:00:01.0: setting latency timer to 64
[    0.374227] pci 0000:00:1c.0: setting latency timer to 64
[    0.374236] pci 0000:00:1c.1: setting latency timer to 64
[    0.374240] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.374241] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.374243] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.374245] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff]
[    0.374246] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.374248] pci_bus 0000:01: resource 1 [mem 0xd2000000-0xd2ffffff]
[    0.374250] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.374251] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.374253] pci_bus 0000:02: resource 1 [mem 0xd3500000-0xd35fffff]
[    0.374255] pci_bus 0000:03: resource 1 [mem 0xd3400000-0xd34fffff]
[    0.374281] NET: Registered protocol family 2
[    0.374306] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.374394] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.374616] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[    0.374673] TCP: Hash tables configured (established 131072 bind 65536)
[    0.374675] TCP reno registered
[    0.374677] UDP hash table entries: 512 (order: 1, 8192 bytes)
[    0.374680] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
[    0.374709] NET: Registered protocol family 1
[    0.374717] pci 0000:00:02.0: Boot video device
[    1.972223] pci 0000:00:1a.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[    3.570154] pci 0000:00:1d.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[    3.570314] PCI: CLS 64 bytes, default 64
[    3.570339] Unpacking initramfs...
[    6.053746] Freeing initrd memory: 13596k freed
[    6.055395] Simple Boot Flag at 0x44 set to 0x1
[    6.055594] audit: initializing netlink socket (disabled)
[    6.055602] type=2000 audit(1389216712.948:1): initialized
[    6.067538] highmem bounce pool size: 64 pages
[    6.067542] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    6.067587] VFS: Disk quotas dquot_6.5.2
[    6.067596] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    6.067627] msgmni has been set to 1713
[    6.067707] alg: No test for stdrng (krng)
[    6.067719] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    6.067721] io scheduler noop registered
[    6.067722] io scheduler deadline registered
[    6.067726] io scheduler cfq registered (default)
[    6.067773] pcieport 0000:00:01.0: setting latency timer to 64
[    6.067793] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    6.067918] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    6.067932] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    6.067934] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    6.068181] ERST: Table is not found!
[    6.068182] GHES: HEST is not enabled!
[    6.068189] isapnp: Scanning for PnP cards...
[    6.421782] isapnp: No Plug & Play device found
[    6.421812] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    6.422177] Linux agpgart interface v0.103
[    6.422240] agpgart-intel 0000:00:00.0: Intel Ivybridge Chipset
[    6.422296] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    6.422732] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[    6.422801] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[    6.422894] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[    6.437359] serio: i8042 KBD port at 0x60,0x64 irq 1
[    6.437363] serio: i8042 AUX port at 0x60,0x64 irq 12
[    6.437427] mousedev: PS/2 mouse device common for all mice
[    6.437672] rtc_cmos 00:06: RTC can wake from S4
[    6.437755] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    6.437780] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    6.437807] EISA: Probing bus 0 at eisa.0
[    6.437808] EISA: Cannot allocate resource for mainboard
[    6.437810] Cannot allocate resource for EISA slot 1
[    6.437811] Cannot allocate resource for EISA slot 2
[    6.437812] Cannot allocate resource for EISA slot 3
[    6.437814] Cannot allocate resource for EISA slot 4
[    6.437815] Cannot allocate resource for EISA slot 5
[    6.437816] Cannot allocate resource for EISA slot 6
[    6.437817] Cannot allocate resource for EISA slot 7
[    6.437818] Cannot allocate resource for EISA slot 8
[    6.437819] EISA: Detected 0 cards.
[    6.437821] cpuidle: using governor ladder
[    6.437822] cpuidle: using governor menu
[    6.437924] TCP cubic registered
[    6.437935] NET: Registered protocol family 10
[    6.438157] Mobile IPv6
[    6.438159] NET: Registered protocol family 17
[    6.438162] Registering the dns_resolver key type
[    6.438168] Using IPI Shortcut mode
[    6.438215] PM: Hibernation image not present or could not be loaded.
[    6.438222] registered taskstats version 1
[    6.438580] rtc_cmos 00:06: setting system clock to 2014-01-08 21:31:53 UTC (1389216713)
[    6.438628] Initializing network drop monitor service
[    6.438681] Freeing unused kernel memory: 452k freed
[    6.438752] Write protecting the kernel text: 2588k
[    6.438764] Write protecting the kernel read-only data: 1040k
[    6.453405] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    6.478495] udevd[45]: starting version 175
[    6.497159] usbcore: registered new interface driver usbfs
[    6.497174] usbcore: registered new interface driver hub
[    6.519159] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input1
[    6.519165] ACPI: Power Button [PWRB]
[    6.519200] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0E:00/input/input2
[    6.519203] ACPI: Sleep Button [SLPB]
[    6.519250] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[    6.519283] ACPI: Lid Switch [LID0]
[    6.519313] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    6.519316] ACPI: Power Button [PWRF]
[    6.532045] SCSI subsystem initialized
[    6.534328] usbcore: registered new device driver usb
[    6.534550] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    6.534585] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    6.534589] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    6.534600] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    6.534621] ehci_hcd 0000:00:1a.0: debug port 2
[    6.538509] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[    6.540776] [drm] Initialized drm 1.1.0 20060810
[    6.553437] wmi: Mapper loaded
[    6.554320] libata version 3.00 loaded.
[    6.568277] thermal LNXTHERM:00: registered as thermal_zone0
[    6.568279] ACPI: Thermal Zone [TZ00] (53 C)
[    6.580968] nouveau 0000:01:00.0: setting latency timer to 64
[    6.584616] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xd3619000
[    6.595114] [drm] nouveau 0000:01:00.0: Detected an NVd0 generation card (0x0d7000a2)
[    6.604540] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    6.604568] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    6.604570] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.604572] usb usb1: Product: EHCI Host Controller
[    6.604573] usb usb1: Manufacturer: Linux 3.2.0-4-486 ehci_hcd
[    6.604575] usb usb1: SerialNumber: 0000:00:1a.0
[    6.604832] hub 1-0:1.0: USB hub found
[    6.604835] hub 1-0:1.0: 2 ports detected
[    6.604907] xhci_hcd 0000:00:14.0: setting latency timer to 64
[    6.604911] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    6.604916] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    6.605003] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    6.605011] xhci_hcd 0000:00:14.0: irq 21, io mem 0xd3600000
[    6.605024] xhci_hcd 0000:00:14.0: Failed to enable MSI-X
[    6.605105] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X
[    6.605135] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    6.605137] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.605138] usb usb2: Product: xHCI Host Controller
[    6.605140] usb usb2: Manufacturer: Linux 3.2.0-4-486 xhci_hcd
[    6.605141] usb usb2: SerialNumber: 0000:00:14.0
[    6.605194] xHCI xhci_add_endpoint called for root hub
[    6.605195] xHCI xhci_check_bandwidth called for root hub
[    6.605215] hub 2-0:1.0: USB hub found
[    6.605222] hub 2-0:1.0: 4 ports detected
[    6.605263] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    6.605267] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    6.605279] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[    6.605280] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.605282] usb usb3: Product: xHCI Host Controller
[    6.605283] usb usb3: Manufacturer: Linux 3.2.0-4-486 xhci_hcd
[    6.605285] usb usb3: SerialNumber: 0000:00:14.0
[    6.605331] xHCI xhci_add_endpoint called for root hub
[    6.605332] xHCI xhci_check_bandwidth called for root hub
[    6.605352] hub 3-0:1.0: USB hub found
[    6.605359] hub 3-0:1.0: 4 ports detected
[    6.605485] ahci 0000:00:1f.2: version 3.0
[    6.605525] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[    6.605547] ahci: SSS flag set, parallel bus scan disabled
[    6.613585] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[    6.661662] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
[    6.661663] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM
[    6.661672] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
[    6.661673] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PCIROM
[    6.661675] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
[    6.661676] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from ACPI
[    6.661696] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[    6.661699] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst
[    6.661704] ahci 0000:00:1f.2: setting latency timer to 64
[    6.663239] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
[    6.663242] [drm] nouveau 0000:01:00.0: No valid BIOS image found
[    6.666712] scsi0 : ahci
[    6.666798] scsi1 : ahci
[    6.666870] scsi2 : ahci
[    6.666939] scsi3 : ahci
[    6.667006] scsi4 : ahci
[    6.667074] scsi5 : ahci
[    6.667111] ata1: SATA max UDMA/133 abar m2048@0xd3617000 port 0xd3617100 irq 42
[    6.667113] ata2: DUMMY
[    6.667116] ata3: SATA max UDMA/133 abar m2048@0xd3617000 port 0xd3617200 irq 42
[    6.667117] ata4: DUMMY
[    6.667118] ata5: DUMMY
[    6.667119] ata6: DUMMY
[    6.667207] i915 0000:00:02.0: setting latency timer to 64
[    6.682714] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[    6.682719] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    6.682720] [drm] Driver supports precise vblank timestamp query.
[    6.682770] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
[    6.683128] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    6.953785] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    7.053659] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    7.059926] ata1.00: ATA-8: ST1000LM024 HN-M101MBB, 2AR10001, max UDMA/100
[    7.059930] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    7.065637] Refined TSC clocksource calibration: 2494.333 MHz.
[    7.065642] Switching to clocksource tsc
[    7.066203] ata1.00: configured for UDMA/100
[    7.066291] scsi 0:0:0:0: Direct-Access     ATA      ST1000LM024 HN-M 2AR1 PQ: 0 ANSI: 5
[    7.086006] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    7.086011] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    7.086150] hub 1-1:1.0: USB hub found
[    7.086255] hub 1-1:1.0: 6 ports detected
[    7.270098] usb 2-3: new full-speed USB device number 2 using xhci_hcd
[    7.270629] usb 2-3: Device not responding to set address.
[    7.324416] fbcon: inteldrmfb (fb0) is primary device
[    7.385225] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    7.400461] ata3.00: ATAPI: MATSHITA DVD-RAM UJ8D1, 8.10, max UDMA/100
[    7.413623] ata3.00: configured for UDMA/100
[    7.414826] scsi 2:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ8D1    8.10 PQ: 0 ANSI: 5
[    7.420743] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    7.420745] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    7.420768] sd 0:0:0:0: [sda] Write Protect is off
[    7.420770] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    7.420780] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    7.425979] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    7.425983] cdrom: Uniform CD-ROM driver Revision: 3.20
[    7.426222] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    7.473198] usb 2-3: Device not responding to set address.
[    7.487869]  sda: sda1 sda2 < sda5 sda6 >
[    7.488170] sd 0:0:0:0: [sda] Attached SCSI disk
[    7.490877] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    7.491140] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    7.544668] Console: switching to colour frame buffer device 170x48
[    7.548321] fb0: inteldrmfb frame buffer device
[    7.548323] drm: registered panic notifier
[    7.548824] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[    7.550407] acpi device:37: registered as cooling_device0
[    7.550810] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:35/LNXVIDEO:00/input/input5
[    7.550816] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
[    7.552826] acpi device:43: registered as cooling_device1
[    7.553852] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input6
[    7.553857] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    7.553984] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    7.554019] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    7.554022] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    7.554029] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    7.554050] ehci_hcd 0000:00:1d.0: debug port 2
[    7.557943] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[    7.560846] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xd3618000
[    7.572978] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    7.573024] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[    7.573026] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.573028] usb usb4: Product: EHCI Host Controller
[    7.573029] usb usb4: Manufacturer: Linux 3.2.0-4-486 ehci_hcd
[    7.573031] usb usb4: SerialNumber: 0000:00:1d.0
[    7.573539] hub 4-0:1.0: USB hub found
[    7.573544] hub 4-0:1.0: 2 ports detected
[    7.676841] usb 2-3: device not accepting address 2, error -71
[    7.788701] usb 2-3: new full-speed USB device number 3 using xhci_hcd
[    7.788807] usb 2-3: Device not responding to set address.
[    7.802490] uvesafb: Intel Corporation, Intel(R) Sandybridge/Ivybridge Graphics Controller, Hardware Version 0.0, OEM: Intel(R) Sandybridge/Ivybridge Graphics Chipset Accelerated VGA BIOS, VBE v3.0
[    7.827415] uvesafb: VBIOS/hardware supports DDC2 transfers
[    7.839912] uvesafb: monitor limits: vf = 60 Hz, hf = 47 kHz, clk = 70 MHz
[    7.840038] uvesafb: scrolling: redraw
[    7.840944] uvesafb: framebuffer at 0xe0000000, mapped to 0xf8f80000, using 8256k, total 65472k
[    7.840945] fb1: VESA VGA frame buffer device
[    7.842793] vga16fb: initializing
[    7.842796] vga16fb: mapped to 0xc00a0000
[    7.842855] fb2: VGA16 VGA frame buffer device
[    7.984340] Btrfs loaded
[    7.992535] usb 2-3: Device not responding to set address.
[    8.191646] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    8.198492] usb 2-3: device not accepting address 3, error -71
[    8.363965] usb 2-3: new full-speed USB device number 4 using xhci_hcd
[    8.364072] usb 2-3: Device not responding to set address.
[    8.567783] usb 2-3: Device not responding to set address.
[    8.771423] usb 2-3: device not accepting address 4, error -71
[    8.883292] usb 2-3: new full-speed USB device number 5 using xhci_hcd
[    8.883404] usb 2-3: Device not responding to set address.
[    9.087141] usb 2-3: Device not responding to set address.
[    9.290754] usb 2-3: device not accepting address 5, error -71
[    9.290796] hub 2-0:1.0: unable to enumerate USB device on port 3
[    9.362808] usb 1-1.3: new full-speed USB device number 3 using ehci_hcd
[    9.456675] usb 1-1.3: New USB device found, idVendor=105b, idProduct=e065
[    9.456681] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    9.456685] usb 1-1.3: Product: BCM43142A0
[    9.456688] usb 1-1.3: Manufacturer: Broadcom Corp
[    9.456691] usb 1-1.3: SerialNumber: B8763FA28D38
[    9.526592] usb 1-1.4: new high-speed USB device number 4 using ehci_hcd
[    9.619210] usb 1-1.4: New USB device found, idVendor=0bda, idProduct=0129
[    9.619213] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    9.619215] usb 1-1.4: Product: USB2.0-CRW
[    9.619216] usb 1-1.4: Manufacturer: Generic
[    9.619218] usb 1-1.4: SerialNumber: 20100201396000000
[    9.730190] usb 4-1: new high-speed USB device number 2 using ehci_hcd
[    9.862398] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
[    9.862404] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    9.862568] hub 4-1:1.0: USB hub found
[    9.862643] hub 4-1:1.0: 6 ports detected
[    9.916391] udevd[349]: starting version 175
[   10.120030] ACPI: Requesting acpi_cpufreq
[   10.131098] Monitor-Mwait will be used to enter C-1 state
[   10.131101] Monitor-Mwait will be used to enter C-2 state
[   10.131105] ACPI: acpi_idle registered with cpuidle
[   10.133795] usb 4-1.6: new high-speed USB device number 3 using ehci_hcd
[   10.234290] usb 4-1.6: New USB device found, idVendor=04f2, idProduct=b2e1
[   10.234297] usb 4-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   10.234301] usb 4-1.6: Product: Lenovo EasyCamera
[   10.234304] usb 4-1.6: Manufacturer: Vimicro Corp.
[   10.239680] ACPI: AC Adapter [ACAD] (on-line)
[   10.309461] ACPI: Battery Slot [BAT1] (battery present)
[   10.336475] ACPI: resource 0000:00:1f.3 [io  0x4040-0x405f] conflicts with ACPI region SMBI [io 0x4040-0x404f]
[   10.336478] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.347461] input: PC Speaker as /devices/platform/pcspkr/input/input7
[   10.424931] iTCO_vendor_support: vendor-support=0
[   10.426246] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[   10.426307] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[   10.426772] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   10.806331] input: Ideapad extra buttons as /devices/platform/ideapad/input/input8
[   11.005191] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[   11.005208] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[   11.228966] Linux media interface: v0.10
[   11.280624] Linux video capture interface: v2.00
[   11.357932] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (04f2:b2e1)
[   11.359040] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.0/input/input9
[   11.359119] usbcore: registered new interface driver uvcvideo
[   11.359121] USB Video Class driver (1.1.1)
[   11.365538] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400
[   11.430994] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10
[   11.547143] rts5139: module is from the staging directory, the quality is unknown, you have been warned.
[   11.547712] Initializing rts5139 USB card reader driver...
[   11.550837] scsi6 : SCSI emulation for RTS5139 USB card reader
[   11.550977] scsi 6:0:0:0: Direct-Access     Generic- xD/SD/M.S.       1.00 PQ: 0 ANSI: 0 CCS
[   11.551300] sd 6:0:0:0: Attached scsi generic sg2 type 0
[   11.551364] usbcore: registered new interface driver rts5139
[   11.551365] Realtek rts5139 USB card reader support registered.
[   11.552335] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[   11.597035] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
[   11.654635] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[   11.654773] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   12.596174] Adding 9075708k swap on /dev/sda6.  Priority:-1 extents:1 across:9075708k
[   12.606021] EXT4-fs (sda1): re-mounted. Opts: (null)
[   12.848713] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   13.583297] device-mapper: uevent: version 1.0.3
[   13.583646] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[   13.715537] loop: module loaded
[   15.587923] fuse init (API version 7.17)
[   19.084856] Bluetooth: Core ver 2.16
[   19.084869] NET: Registered protocol family 31
[   19.084871] Bluetooth: HCI device and connection manager initialized
[   19.084872] Bluetooth: HCI socket layer initialized
[   19.084874] Bluetooth: L2CAP socket layer initialized
[   19.084994] Bluetooth: SCO socket layer initialized
[   19.118637] Bluetooth: RFCOMM TTY layer initialized
[   19.118641] Bluetooth: RFCOMM socket layer initialized
[   19.118642] Bluetooth: RFCOMM ver 1.11
[   19.132699] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   19.132701] Bluetooth: BNEP filters: protocol multicast
[   19.253198] lp: driver loaded but no devices found
[   19.352887] ppdev: user-space parallel port driver
[   41.957206] usb 2-3: new full-speed USB device number 6 using xhci_hcd
[   41.957311] usb 2-3: Device not responding to set address.
[   42.161023] usb 2-3: Device not responding to set address.
[   42.364673] usb 2-3: device not accepting address 6, error -71
[   42.420635] hub 2-0:1.0: unable to enumerate USB device on port 3
[   43.607123] usb 2-3: new full-speed USB device number 8 using xhci_hcd
[   43.624850] xhci_hcd 0000:00:14.0: WARN: short transfer on control ep
[   43.625281] xhci_hcd 0000:00:14.0: WARN: short transfer on control ep
[   43.625532] xhci_hcd 0000:00:14.0: WARN: short transfer on control ep
[   43.625579] usb 2-3: New USB device found, idVendor=09da, idProduct=8090
[   43.625584] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   43.625588] usb 2-3: Product: USB Full Speed
[   43.625590] usb 2-3: Manufacturer: A4Tech
[   44.417308] input: A4Tech USB Full Speed as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.0/input/input13
[   44.417553] generic-usb 0003:09DA:8090.0001: input,hidraw0: USB HID v1.11 Mouse [A4Tech USB Full Speed] on usb-0000:00:14.0-3/input0
[   44.419536] input: A4Tech USB Full Speed as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.1/input/input14
[   44.419760] generic-usb 0003:09DA:8090.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [A4Tech USB Full Speed] on usb-0000:00:14.0-3/input1
[   44.419772] usbcore: registered new interface driver usbhid
[   44.419773] usbhid: USB HID core driver

*

Offline dedito

  • ***
  • 241
  • 140
Odp: Brak internetu na Lenovo G580
« Odpowiedź #3 dnia: Styczeń 08, 2014, 23:08:46 pm »
Zrób najpierw aktualizację systemu bo jest już nowszy kernel w repozytoriach, w którym prawdopodobnie jest już obsługa twojego sprzętu sieciowego.

*

drabowicz

Odp: Brak internetu na Lenovo G580
« Odpowiedź #4 dnia: Styczeń 08, 2014, 23:11:30 pm »
Jak moge zrobic aktualizacje systemu jesli i po kablu i przez wifi internetu brak?

*

Offline dedito

  • ***
  • 241
  • 140
Odp: Brak internetu na Lenovo G580
« Odpowiedź #5 dnia: Styczeń 08, 2014, 23:13:01 pm »
No to mnie złapałeś, hehe gdzie ja mam głowę :) ale się uśmiałem, aż mi łzy poleciały :)
Ale jakoś z innego źródła możesz ściągać pakiety?
« Ostatnia zmiana: Styczeń 08, 2014, 23:15:18 pm wysłana przez dedito »

*

drabowicz

Odp: Brak internetu na Lenovo G580
« Odpowiedź #6 dnia: Styczeń 08, 2014, 23:20:59 pm »
Jasne. Mam inne sprzety do dyspozycji z internetem i pamiec usb zeby ewentualnie przeniesc dane. Z pewnoscia masz pojecie co sciagnac, skad i jak zainstalowac. Ja mam pojecie jak uzywac przegladarki i przenosic dane z pamieci usb, wiec poki co jest calkiem dobrze ; )

*

Offline dedito

  • ***
  • 241
  • 140
Odp: Brak internetu na Lenovo G580
« Odpowiedź #7 dnia: Styczeń 08, 2014, 23:29:26 pm »
A dostęp do wifi też masz?
Dlaczego nie wybrałeś dystrybucji dla procesorów 64bit ?
Napewno ściągnąłeś ostatnie lmde, coś mi ta wersja kernela jest za niska ?
Generalnie wujek google ma rozwiązania na twój problem, próbowałeś coś z tych rozwiązań?
« Ostatnia zmiana: Styczeń 08, 2014, 23:34:26 pm wysłana przez dedito »

*

drabowicz

Odp: Brak internetu na Lenovo G580
« Odpowiedź #8 dnia: Styczeń 08, 2014, 23:52:50 pm »
Mam 2 komputery stacjonarne (1 z dostepem do internetu po kablu, 2 przez wifi) oraz 2 laptopy (na 1 wifi oraz 2 to Lenovo, na ktorym mam Minta - i na tym mi zalezy najbardziej, bo aktualnie bez internetu).

Zamiast 64bit wybralem 32bit, bo mam tylko 4gb ramu i procesor i3, takze przy wczesniejszych probach i zabawach z innymi dystrybucjami stwierdzilem ze zostane z 32bit. Chodzi o szybkosc i dostepnosc oprogramowania i mniej problemow z uruchamianiem 32bit aplikacji na 64bit systemie.

Minta pobralem z oficjalnej strony, wersje 32bit:
http://www.linuxmint.com/download_lmde.php
Reszte info jest w wynikach z terminala, ktore podalem i z ktorych nic nie rozumiem.

Rozwiazan ze sterownikami do Lenovo G580 probowalem na rozne sposoby na roznych dystrybucjach: BT5R3-PL-PREMIUM-UP2 ; debian-7.3.0-i386-netinst ; KALI-PL-PREMIUM-1.0.2c ; linuxmint-16-cinnamon-dvd-32bit ; ubuntu-gnome-13.10-desktop-i386 i innych a internet po kablu i przez wifi dzialal od razu, po instalce ubuntu-13.10-desktop-i386 a po za tym nigdzie indziej.

A zdecydowalem sie na Minta, bo podoba mi sie najbardziej.
« Ostatnia zmiana: Styczeń 08, 2014, 23:54:47 pm wysłana przez drabowicz »

*

Offline mati75

  • Rodzina Linux Mint
  • *******
  • 2394
  • 25121
  • Płeć: Mężczyzna
    • >>>Click me!<<<
Odp: Brak internetu na Lenovo G580
« Odpowiedź #9 dnia: Styczeń 08, 2014, 23:55:19 pm »
LMDE korzysta z własnych repozytoriów z przestarzałymi pakietami i dlatego jest tak jak jest.

υωαgα α∂мιи !!! вαиαмι иαριєя∂αℓα !!!

*

Offline szymon1978

  • Rodzina Linux Mint
  • *******
  • 1593
  • 2073
  • Płeć: Mężczyzna
  • Nieobecny

*

Offline dedito

  • ***
  • 241
  • 140
Odp: Brak internetu na Lenovo G580
« Odpowiedź #11 dnia: Styczeń 09, 2014, 10:37:39 am »
A zdecydowalem sie na Minta, bo podoba mi sie najbardziej.
Z wydruków i treści twoich postów wynika, że masz LMDE. Jest różnica pomiędzy Mint a LMDE: pierwszy opiera się na Ubuntu a drugi na Debianie. Zakładam mimo wszystko, że masz LMDE.
Ja zacznę od wifi, daj wynik polecenia:
lspci -vnn | grep Network
« Ostatnia zmiana: Styczeń 09, 2014, 11:00:39 am wysłana przez dedito »