Forum Linux Mint Polska
Sterownik do WIFI na USB - Wersja do druku

+- Forum Linux Mint Polska (https://forum.linuxmint.pl)
+-- Dział: Wsparcie (https://forum.linuxmint.pl/forumdisplay.php?fid=203)
+--- Dział: Sprzęt i sterowniki (https://forum.linuxmint.pl/forumdisplay.php?fid=118)
+--- Wątek: Sterownik do WIFI na USB (/showthread.php?tid=1017)

Strony: 1 2


Sterownik do WIFI na USB - kines17 - 22-05-2020

Witam
Mam problem z zainstalowaniem WIFI na USB
Jeżeli ktoś umie to uprzejmie proszę o pomoc.


Kod:
[email protected]:~$ lsusb
Bus 002 Device 062: ID 148f:7601 Ralink Technology, Corp. MT7601U Wireless Adapter
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 00da:8510 
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Kod:
[email protected]:~$ lspci
00:00.0 Host bridge: Intel Corporation 82Q35 Express DRAM Controller (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82Q35 Express Integrated Graphics Controller (rev 02)
00:02.1 Display controller: Intel Corporation 82Q35 Express Integrated Graphics Controller (rev 02)
00:03.0 Communication controller: Intel Corporation 82Q35 Express MEI Controller (rev 02)
00:03.2 IDE interface: Intel Corporation 82Q35 Express PT IDER Controller (rev 02)
00:03.3 Serial controller: Intel Corporation 82Q35 Express Serial KT Controller (rev 02)
00:19.0 Ethernet controller: Intel Corporation 82566DM-2 Gigabit Network Connection (rev 02)
00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)
00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02)
00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
00:1f.0 ISA bridge: Intel Corporation 82801IO (ICH9DO) LPC Interface Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA Controller [AHCI mode] (rev 02)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)

Kod:
########## wireless info START ##########

Report from: 22 May 2020 23:52 CEST +0200

Booted last: 22 May 2020 00:00 CEST +0200

Script from: 22 Oct 2018 03:34 UTC +0000

##### release ###########################

Distributor ID:    LinuxMint
Description:    Linux Mint 19.3 Tricia
Release:    19.3
Codename:    tricia

##### kernel ############################

Linux 5.3.0-53-generic #47~18.04.1-Ubuntu SMP Thu May 7 19:47:25 UTC 2020 i686 i686 i686 GNU/Linux

Parameters: ro, quiet, splash, vt.handoff=1

##### desktop ###########################

Xfce

##### lspci #############################

00:19.0 Ethernet controller [0200]: Intel Corporation 82566DM-2 Gigabit Network Connection [8086:10bd] (rev 02)
    Subsystem: Dell OptiPlex 755 [1028:0211]
    Kernel driver in use: e1000e

##### lsusb #############################

Bus 002 Device 093: ID 148f:7601 Ralink Technology, Corp. MT7601U Wireless Adapter
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 00da:8510  
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

##### PCMCIA card info ##################

##### rfkill ############################

##### secure boot #######################

'mokutil' is not installed (package "mokutil").

##### lsmod #############################

mac80211              745472  1 mt7601u
cfg80211              618496  2 mac80211,mt7601u
libarc4                16384  1 mac80211

##### interfaces ########################

[/etc/network/interfaces]
auto lo
iface lo inet loopback

##### ifconfig ##########################

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback <MAC address> brd <MAC address>
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: enp0s25: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether <MAC 'enp0s25' [IF1]> brd <MAC address>
    inet 192.168.2.69/24 brd 192.168.2.255 scope global dynamic noprefixroute enp0s25
       valid_lft 42231sec preferred_lft 42231sec
    inet6 fe80::4596:19c0:b201:1fa4/64 scope link noprefixroute
       valid_lft forever preferred_lft forever

##### iwconfig ##########################

lo        no wireless extensions.

enp0s25   no wireless extensions.

##### route #############################

default via 192.168.2.1 dev enp0s25 proto dhcp metric 100
169.254.0.0/16 dev enp0s25 scope link metric 1000
192.168.2.0/24 dev enp0s25 proto kernel scope link src 192.168.2.69 metric 100

##### resolv.conf #######################

[777 root '/etc/resolv.conf' -> '../run/systemd/resolve/stub-resolv.conf']

nameserver 127.0.0.53
options edns0
search lan

##### network managers ##################

Installed:

    NetworkManager

Running:

root       783     1  0 23:35 ?        00:00:00 /usr/sbin/NetworkManager --no-daemon

##### NetworkManager info ###############

GENERAL.DEVICE:                         enp0s25
GENERAL.TYPE:                           ethernet
GENERAL.NM-TYPE:                        NMDeviceEthernet
GENERAL.VENDOR:                         Intel Corporation
GENERAL.PRODUCT:                        82566DM-2 Gigabit Network Connection (OptiPlex 755)
GENERAL.DRIVER:                         e1000e
GENERAL.DRIVER-VERSION:                 3.2.6-k
GENERAL.FIRMWARE-VERSION:               1.4-0
GENERAL.HWADDR:                         <MAC 'enp0s25' [IF1]>
GENERAL.MTU:                            1500
GENERAL.STATE:                          100 (connected)
GENERAL.REASON:                         0 (No reason given)
GENERAL.UDI:                            /sys/devices/pci0000:00/0000:00:19.0/net/enp0s25
GENERAL.IP-IFACE:                       enp0s25
GENERAL.IS-SOFTWARE:                    no
GENERAL.NM-MANAGED:                     yes
GENERAL.AUTOCONNECT:                    yes
GENERAL.FIRMWARE-MISSING:               no
GENERAL.NM-PLUGIN-MISSING:              no
GENERAL.PHYS-PORT-ID:                   --
GENERAL.CONNECTION:                     Połączenie przewodowe 1
GENERAL.CON-UUID:                       66c208c8-07df-30ed-afd6-87234f356093
GENERAL.CON-PATH:                       /org/freedesktop/NetworkManager/ActiveConnection/1
GENERAL.METERED:                        no (guessed)
CAPABILITIES.CARRIER-DETECT:            yes
CAPABILITIES.SPEED:                     1000 Mb/s
CAPABILITIES.IS-SOFTWARE:               no
CAPABILITIES.SRIOV:                     no
WIRED-PROPERTIES.CARRIER:               on
IP4.ADDRESS[1]:                         192.168.2.69/24
IP4.GATEWAY:                            192.168.2.1
IP4.ROUTE[1]:                           dst = 0.0.0.0/0, nh = 192.168.2.1, mt = 100
IP4.ROUTE[2]:                           dst = 192.168.2.0/24, nh = 0.0.0.0, mt = 100
IP4.ROUTE[3]:                           dst = 169.254.0.0/16, nh = 0.0.0.0, mt = 1000
IP4.DNS[1]:                             192.168.2.1
IP4.DOMAIN[1]:                          lan
DHCP4.OPTION[1]:                        requested_subnet_mask = 1
DHCP4.OPTION[2]:                        requested_rfc3442_classless_static_routes = 1
DHCP4.OPTION[3]:                        subnet_mask = 255.255.255.0
DHCP4.OPTION[4]:                        domain_name_servers = 192.168.2.1
DHCP4.OPTION[5]:                        ip_address = 192.168.2.69
DHCP4.OPTION[6]:                        requested_static_routes = 1
DHCP4.OPTION[7]:                        dhcp_server_identifier = 192.168.2.1
DHCP4.OPTION[8]:                        requested_time_offset = 1
DHCP4.OPTION[9]:                        broadcast_address = 192.168.2.255
DHCP4.OPTION[10]:                       dhcp_rebinding_time = 37800
DHCP4.OPTION[11]:                       requested_interface_mtu = 1
DHCP4.OPTION[12]:                       requested_domain_name_servers = 1
DHCP4.OPTION[13]:                       dhcp_message_type = 5
DHCP4.OPTION[14]:                       requested_broadcast_address = 1
DHCP4.OPTION[15]:                       dhcp_renewal_time = 21600
DHCP4.OPTION[16]:                       routers = 192.168.2.1
DHCP4.OPTION[17]:                       requested_domain_name = 1
DHCP4.OPTION[18]:                       domain_name = lan
DHCP4.OPTION[19]:                       requested_routers = 1
DHCP4.OPTION[20]:                       expiry = 1590226552
DHCP4.OPTION[21]:                       host_name = user-OptiPlex-755
DHCP4.OPTION[22]:                       requested_netbios_scope = 1
DHCP4.OPTION[23]:                       requested_wpad = 1
DHCP4.OPTION[24]:                       requested_ms_classless_static_routes = 1
DHCP4.OPTION[25]:                       requested_netbios_name_servers = 1
DHCP4.OPTION[26]:                       network_number = 192.168.2.0
DHCP4.OPTION[27]:                       requested_domain_search = 1
DHCP4.OPTION[28]:                       next_server = 192.168.2.1
DHCP4.OPTION[29]:                       requested_ntp_servers = 1
DHCP4.OPTION[30]:                       requested_host_name = 1
DHCP4.OPTION[31]:                       dhcp_lease_time = 43200
IP6.ADDRESS[1]:                         fe80::4596:19c0:b201:1fa4/64
IP6.GATEWAY:                            --
IP6.ROUTE[1]:                           dst = ff00::/8, nh = ::, mt = 256, table=255
IP6.ROUTE[2]:                           dst = fe80::/64, nh = ::, mt = 256
IP6.ROUTE[3]:                           dst = fe80::/64, nh = ::, mt = 100
CONNECTIONS.AVAILABLE-CONNECTION-PATHS: /org/freedesktop/NetworkManager/Settings/{1}
CONNECTIONS.AVAILABLE-CONNECTIONS[1]:   66c208c8-07df-30ed-afd6-87234f356093 | Połączenie przewodowe 1

##### NetworkManager.state ##############

[main]
NetworkingEnabled=true
WirelessEnabled=true
WWANEnabled=true

##### NetworkManager config #############

[[/etc/NetworkManager/conf.d/default-wifi-powersave-on.conf]]
[connection]
wifi.powersave = 3

[[/etc/NetworkManager/NetworkManager.conf]]
[main]
plugins=ifupdown,keyfile
[ifupdown]
managed=false
[device]
wifi.scan-rand-mac-address=no

[[/usr/lib/NetworkManager/conf.d/10-dns-resolved.conf]]
[main]
dns=systemd-resolved

[[/usr/lib/NetworkManager/conf.d/10-globally-managed-devices.conf]]
[keyfile]
unmanaged-devices=*,except:type:wifi,except:type:wwan

[[/usr/lib/NetworkManager/conf.d/20-connectivity-ubuntu.conf]]
[connectivity]
uri=http://connectivity-check.ubuntu.com/

[[/usr/lib/NetworkManager/conf.d/no-mac-addr-change.conf]]
[device-mac-addr-change-wifi]
match-device=driver:rtl8723bs,driver:rtl8189es,driver:r8188eu,driver:8188eu,driver:eagle_sdio,driver:wl
wifi.scan-rand-mac-address=no
wifi.cloned-mac-address=preserve
ethernet.cloned-mac-address=preserve

##### NetworkManager profiles ###########

##### Netplan config ####################

[/etc/netplan/1-network-manager-all.yaml]
network:
  version: 2
  renderer: NetworkManager

##### iw reg get ########################

Region: Europe/Warsaw (based on set time zone)

global
country 00: DFS-UNSET
    (2402 - 2472 @ 40), (N/A, 20), (N/A)
    (2457 - 2482 @ 20), (N/A, 20), (N/A), AUTO-BW, PASSIVE-SCAN
    (2474 - 2494 @ 20), (N/A, 20), (N/A), NO-OFDM, PASSIVE-SCAN
    (5170 - 5250 @ 80), (N/A, 20), (N/A), AUTO-BW, PASSIVE-SCAN
    (5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS, AUTO-BW, PASSIVE-SCAN
    (5490 - 5730 @ 160), (N/A, 20), (0 ms), DFS, PASSIVE-SCAN
    (5735 - 5835 @ 80), (N/A, 20), (N/A), PASSIVE-SCAN
    (57240 - 63720 @ 2160), (N/A, 0), (N/A)

##### iwlist channels ###################

lo        no frequency information.

enp0s25   no frequency information.

##### iwlist scan #######################

lo        Interface doesn't support scanning.

enp0s25   Interface doesn't support scanning.

##### module infos ######################

[mac80211]
filename:       /lib/modules/5.3.0-53-generic/kernel/net/mac80211/mac80211.ko
license:        GPL
description:    IEEE 802.11 subsystem
srcversion:     3CAA5591258AA1197C9EAB6
depends:        cfg80211,libarc4
retpoline:      Y
intree:         Y
name:           mac80211
vermagic:       5.3.0-53-generic SMP mod_unload 686
signat:         PKCS#7
signer:        
sig_key:        
sig_hashalgo:   md4
parm:           minstrel_vht_only:Use only VHT rates when VHT is supported by sta. (bool)
parm:           max_nullfunc_tries:Maximum nullfunc tx tries before disconnecting (reason 4). (int)
parm:           max_probe_tries:Maximum probe tries before disconnecting (reason 4). (int)
parm:           beacon_loss_count:Number of beacon intervals before we decide beacon was lost. (int)
parm:           probe_wait_ms:Maximum time(ms) to wait for probe response before disconnecting (reason 4). (int)
parm:           ieee80211_default_rc_algo:Default rate control algorithm for mac80211 to use (charp)

[cfg80211]
filename:       /lib/modules/5.3.0-53-generic/kernel/net/wireless/cfg80211.ko
description:    wireless configuration support
license:        GPL
author:         Johannes Berg
srcversion:     8910C416654324E4CC7E9C7
depends:        
retpoline:      Y
intree:         Y
name:           cfg80211
vermagic:       5.3.0-53-generic SMP mod_unload 686
signat:         PKCS#7
signer:        
sig_key:        
sig_hashalgo:   md4
parm:           bss_entries_limit:limit to number of scan BSS entries (per wiphy, default 1000) (int)
parm:           ieee80211_regdom:IEEE 802.11 regulatory domain code (charp)
parm:           cfg80211_disable_40mhz_24ghz:Disable 40MHz support in the 2.4GHz band (bool)

##### module parameters #################

[mac80211]
beacon_loss_count: 7
ieee80211_default_rc_algo: minstrel_ht
max_nullfunc_tries: 2
max_probe_tries: 5
minstrel_vht_only: Y
probe_wait_ms: 500

[cfg80211]
bss_entries_limit: 1000
cfg80211_disable_40mhz_24ghz: N
ieee80211_regdom: 00

##### /etc/modules ######################

##### modprobe options ##################

[/etc/modprobe.d/amd64-microcode-blacklist.conf]
blacklist microcode

[/etc/modprobe.d/blacklist-ath_pci.conf]
blacklist ath_pci

[/etc/modprobe.d/blacklist.conf]
blacklist evbug
blacklist usbmouse
blacklist usbkbd
blacklist eepro100
blacklist de4x5
blacklist eth1394
blacklist snd_intel8x0m
blacklist snd_aw2
blacklist i2c_i801
blacklist prism54
blacklist bcm43xx
blacklist garmin_gps
blacklist asus_acpi
blacklist snd_pcsp
blacklist pcspkr
blacklist amd76x_edac

[/etc/modprobe.d/blacklist-rare-network.conf]
alias net-pf-3 off
alias net-pf-6 off
alias net-pf-9 off
alias net-pf-11 off
alias net-pf-12 off
alias net-pf-19 off
alias net-pf-21 off
alias net-pf-36 off

[/etc/modprobe.d/intel-microcode-blacklist.conf]
blacklist microcode

[/etc/modprobe.d/iwlwifi.conf]
remove iwlwifi \
(/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod) \
&& /sbin/modprobe -r mac80211

##### rc.local ##########################

grep: /etc/rc.local: No such file or directory

##### pm-utils ##########################

##### udev rules ########################

##### dmesg #############################

########## wireless info END ############



RE: Sterownik do WIFI na USB - yahoob3 - 23-05-2020

Ta karta może być problematyczna.
Spróbuj tak, po kolei:
Kod:
sudo add-apt-repository ppa:thopiekar/mt7601

sudo apt-get update

sudo apt-get install mt7601-sta-dkms

Po pierwszej komendzie podaj hasło i potem zatwierdź dodanie repo enterem.


RE: Sterownik do WIFI na USB - kines17 - 23-05-2020

Kod:
Loading new mt7601-3.0.0.4 DKMS files...
Building for 5.3.0-53-generic
Building for architecture i386
Building initial module for 5.3.0-53-generic
Error! Bad return status for module build on kernel: 5.3.0-53-generic (i386)
Consult /var/lib/dkms/mt7601/3.0.0.4/build/make.log for more information.
Niestety error.
Piszę dopiero teraz bo od rana byłem w warsztacie. i Dopiero teraz miałem czas wy-testować.

Ma ktoś może jeszcze jakieś pomysły??


RE: Sterownik do WIFI na USB - dedito - 23-05-2020

Pokaż te informacje z loga:
Consult /var/lib/dkms/mt7601/3.0.0.4/build/make.log for more information


RE: Sterownik do WIFI na USB - kines17 - 23-05-2020

Kod:
DKMS make.log for mt7601-3.0.0.4 for kernel 5.3.0-53-generic (i386)
sob, 23 maj 2020, 18:20:44 CEST
make -C tools
make[1]: Wejście do katalogu '/var/lib/dkms/mt7601/3.0.0.4/build/tools'
gcc -g bin2h.c -o bin2h
cp -f os/linux/Makefile.6 /var/lib/dkms/mt7601/3.0.0.4/build/os/linux/Makefile
make -C /lib/modules/5.3.0-53-generic/build SUBDIRS=/var/lib/dkms/mt7601/3.0.0.4/build/os/linux modules
make[1]: Wejście do katalogu '/usr/src/linux-headers-5.3.0-53-generic'
Makefile:227: ================= WARNING ================
Makefile:228: 'SUBDIRS' will be removed after Linux 5.3
Makefile:229:
Makefile:230: If you are building an individual subdirectory
Makefile:231: in the kernel tree, you can do like this:
Makefile:232: $ make path/to/dir/you/want/to/build/
Makefile:233: (Do not forget the trailing slash)
Makefile:234:
Makefile:235: If you are building an external module,
Makefile:236: Please use 'M=' or 'KBUILD_EXTMOD' instead
Makefile:237: ==========================================
make[1]: Opuszczenie katalogu '/var/lib/dkms/mt7601/3.0.0.4/build/tools'
/var/lib/dkms/mt7601/3.0.0.4/build/tools/bin2h
  CC [M]  /var/lib/dkms/mt7601/3.0.0.4/build/os/linux/../../os/linux/rt_profile.o
  CC [M]  /var/lib/dkms/mt7601/3.0.0.4/build/os/linux/../../sta/assoc.o
  CC [M]  /var/lib/dkms/mt7601/3.0.0.4/build/os/linux/../../sta/auth.o
  CC [M]  /var/lib/dkms/mt7601/3.0.0.4/build/os/linux/../../sta/auth_rsp.o
  CC [M]  /var/lib/dkms/mt7601/3.0.0.4/build/os/linux/../../sta/sync.o
  CC [M]  /var/lib/dkms/mt7601/3.0.0.4/build/os/linux/../../sta/sanity.o
/var/lib/dkms/mt7601/3.0.0.4/build/os/linux/../../sta/sync.c: In function ‘PeerBeacon’:
/var/lib/dkms/mt7601/3.0.0.4/build/os/linux/../../sta/sync.c:2182:12: error: passing argument 8 of ‘StaAddMacTableEntry’ from incompatible pointer type [-Werror=incompatible-pointer-types]
            &ie_list,
            ^
In file included from /var/lib/dkms/mt7601/3.0.0.4/build/include/rt_config.h:59:0,
                 from /var/lib/dkms/mt7601/3.0.0.4/build/os/linux/../../sta/sync.c:28:
/var/lib/dkms/mt7601/3.0.0.4/build/include/rtmp.h:7892:9: note: expected ‘IE_LISTS * {aka struct _IE_lists *}’ but argument is of type ‘BCN_IE_LIST ** {aka struct _bcn_ie_list **}’
BOOLEAN StaAddMacTableEntry(
         ^~~~~~~~~~~~~~~~~~~
  CC [M]  /var/lib/dkms/mt7601/3.0.0.4/build/os/linux/../../sta/rtmp_data.o
cc1: some warnings being treated as errors
scripts/Makefile.build:288: recipe for target '/var/lib/dkms/mt7601/3.0.0.4/build/os/linux/../../sta/sync.o' failed
make[2]: *** [/var/lib/dkms/mt7601/3.0.0.4/build/os/linux/../../sta/sync.o] Error 1
make[2]: *** Oczekiwanie na niezakończone zadania....
/var/lib/dkms/mt7601/3.0.0.4/build/os/linux/../../sta/rtmp_data.c: In function ‘STAHandleRxDataFrame’:
/var/lib/dkms/mt7601/3.0.0.4/build/os/linux/../../sta/rtmp_data.c:523:33: error: passing argument 2 of ‘MacTableLookup’ from incompatible pointer type [-Werror=incompatible-pointer-types]
    pEntry = MacTableLookup(pAd, &pHeader->Addr2);
                                 ^
In file included from /var/lib/dkms/mt7601/3.0.0.4/build/include/rt_config.h:59:0,
                 from /var/lib/dkms/mt7601/3.0.0.4/build/os/linux/../../sta/rtmp_data.c:28:
/var/lib/dkms/mt7601/3.0.0.4/build/include/rtmp.h:8429:18: note: expected ‘UCHAR * {aka unsigned char *}’ but argument is of type ‘UCHAR (*)[6] {aka unsigned char (*)[6]}’
MAC_TABLE_ENTRY *MacTableLookup(RTMP_ADAPTER *pAd, UCHAR *pAddr);
                  ^~~~~~~~~~~~~~
cc1: some warnings being treated as errors
scripts/Makefile.build:288: recipe for target '/var/lib/dkms/mt7601/3.0.0.4/build/os/linux/../../sta/rtmp_data.o' failed
make[2]: *** [/var/lib/dkms/mt7601/3.0.0.4/build/os/linux/../../sta/rtmp_data.o] Error 1
Makefile:1656: recipe for target '_module_/var/lib/dkms/mt7601/3.0.0.4/build/os/linux' failed
make[1]: *** [_module_/var/lib/dkms/mt7601/3.0.0.4/build/os/linux] Error 2
make[1]: Opuszczenie katalogu '/usr/src/linux-headers-5.3.0-53-generic'
Makefile:394: recipe for target 'LINUX' failed
make: *** [LINUX] Error 2

Dodano po pewnym czasie:
https://github.com/art567/mt7601usta

Ten sposób też nie działa.


RE: Sterownik do WIFI na USB - dedito - 23-05-2020

Ta karta powinna być wykrywana bo jest wspierana od jądra 4.2 https://linux-hardware.org/index.php?id=usb:148f-7601
Ze skryptu wynika, że masz załadowany moduł mt7601u, ale to tyle bo interfejsu nie widać.
Można spróbować załadować kernel z linii 4, jeśli masz taki do wyboru w swoim menadżerze pakietów.
Pokaż jeszcze pełną zawartość pliku /var/log/kern.log. Wrzuć na pastebin i daj linka.


RE: Sterownik do WIFI na USB - kines17 - 23-05-2020

Można spróbować załadować kernel z linii 4, jeśli masz taki do wyboru w swoim menadżerze pakietów.

Co to znaczy??

Plik o który prosisz waży 140 mega i 4 raz próbuje załadować na stronę i przerywa.

Kod:
[email protected]:~$ cat /var/log/kern.log|pastebinit
Błąd połączenia z serwerem: [Errno socket error] timed out


Używaj znaczników CODE/YB3


RE: Sterownik do WIFI na USB - yahoob3 - 23-05-2020

(23-05-2020, 19:52)kines17 napisał(a): Można spróbować załadować kernel z linii 4, jeśli masz taki do wyboru w swoim menadżerze pakietów.

Co to znaczy??

Uruchom komputer, jeśli wyświetli się menu GRUB, wyberz opcje zaawansowane i z nich uruchomienie systemu na starszym jądrze ale zdaje się, że 19.3 instaluje kernel 5.3 dlatego trzeba by najpierw doinstalować starszy kernel z pomocą menedżera aktualizacji: Widok, jądra Linuksa, wybierz ostatnie z linii 4.18 i zainstaluj je. Potem zrób to co w pierwszej części zdania.

Z drugiej strony... może to nie profesjonalne... Wink Kopać się z koniem za 20-30 zł? Wink


RE: Sterownik do WIFI na USB - kines17 - 23-05-2020

Poleć jakiś działający w 100% adapter USB WiFi i od razu kupuje. Smile


RE: Sterownik do WIFI na USB - dedito - 23-05-2020

A ściągnij sobie jeszcze obraz 64 bit i zobacz czy na nim ta karta ruszy.
Nie instaluj, tylko w trybie live-cd sprawdź.