Ocena wątku:
  • 0 głosów - średnia: 0
  • 1
  • 2
  • 3
  • 4
  • 5
WiFi przestało działać
#11
0
Kod:
sudo rmmod mt7921e && sudo modprobe mt7921e && sudo dmesg | tail
i jak się rozłączy to jeszcze
Kod:
sudo dmesg | tail
Odpowiedz
#12
0
Niestety przy rozłączeniu nie udaje się ponownie połączyć.
Kod:
stanislaw@stanislaw-VivoBook-ASUSLaptop-X513EAN-X513EA:~$ sudo dmesg | tail
[ 4570.777734] wlo1: Limiting TX power to 20 (20 - 0) dBm as advertised by e8:d2:ff:d2:2f:30
[ 4570.848886] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[ 4580.658910] wlo1: disconnect from AP e8:d2:ff:d2:2f:30 for new auth to e8:d2:ff:d2:2f:35
[ 4580.747485] wlo1: authenticate with e8:d2:ff:d2:2f:35
[ 4580.766476] wlo1: send auth to e8:d2:ff:d2:2f:35 (try 1/3)
[ 4580.768754] wlo1: authenticated
[ 4580.778625] wlo1: associate with e8:d2:ff:d2:2f:35 (try 1/3)
[ 4580.783081] wlo1: RX ReassocResp from e8:d2:ff:d2:2f:35 (capab=0x1511 status=0 aid=116)
[ 4581.340583] wlo1: associated
[ 4581.401435] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by e8:d2:ff:d2:2f:35
Odpowiedz
#13
0
Kod:
sudo dmesg | grep wlo1
Odpowiedz
#14
0
Niestety nic.
Kod:
stanislaw@stanislaw-VivoBook-ASUSLaptop-X513EAN-X513EA:~$ sudo dmesg | grep wlo1
[ 2741.571661] mt7921e 0000:02:00.0 wlo1: renamed from wlan0
[ 2744.495898] wlo1: authenticate with e8:d2:ff:d2:2f:35
[ 2744.513095] wlo1: send auth to e8:d2:ff:d2:2f:35 (try 1/3)
[ 2744.523542] wlo1: authenticated
[ 2744.526441] wlo1: associate with e8:d2:ff:d2:2f:35 (try 1/3)
[ 2744.530358] wlo1: RX AssocResp from e8:d2:ff:d2:2f:35 (capab=0x1511 status=0 aid=104)
[ 2745.081822] wlo1: associated
[ 2745.170911] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by e8:d2:ff:d2:2f:35
[ 2745.736242] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[ 2814.781460] wlo1: deauthenticating from e8:d2:ff:d2:2f:35 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 2818.703131] wlo1: Driver requested disconnection from AP 00:00:00:00:00:00
[ 2823.527277] wlo1: authenticate with e8:d2:ff:d2:2f:35
[ 2823.544438] wlo1: send auth to e8:d2:ff:d2:2f:35 (try 1/3)
[ 2823.546660] wlo1: authenticated
[ 2823.553996] wlo1: associate with e8:d2:ff:d2:2f:35 (try 1/3)
[ 2823.558113] wlo1: RX AssocResp from e8:d2:ff:d2:2f:35 (capab=0x1511 status=0 aid=105)
[ 2824.109179] wlo1: associated
[ 2824.121429] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by e8:d2:ff:d2:2f:35
[ 2824.747937] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[ 3050.760819] wlo1: deauthenticating from e8:d2:ff:d2:2f:35 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 3054.752536] wlo1: Driver requested disconnection from AP 00:00:00:00:00:00
[ 3056.001970] mt7921e 0000:02:00.0 wlo1: renamed from wlan0
[ 3058.900530] wlo1: authenticate with e8:d2:ff:d2:2f:30
[ 3059.082299] wlo1: send auth to e8:d2:ff:d2:2f:30 (try 1/3)
[ 3059.086529] wlo1: authenticated
[ 3059.088755] wlo1: associate with e8:d2:ff:d2:2f:30 (try 1/3)
[ 3059.093717] wlo1: RX AssocResp from e8:d2:ff:d2:2f:30 (capab=0x411 status=0 aid=2)
[ 3059.116342] wlo1: associated
[ 3059.141780] wlo1: Limiting TX power to 20 (20 - 0) dBm as advertised by e8:d2:ff:d2:2f:30
[ 3059.222738] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[ 3061.486943] wlo1: deauthenticated from e8:d2:ff:d2:2f:30 (Reason: 12=<unknown>)
[ 3064.187091] wlo1: authenticate with e8:d2:ff:d2:2f:35
[ 3064.204205] wlo1: send auth to e8:d2:ff:d2:2f:35 (try 1/3)
[ 3064.206457] wlo1: authenticated
[ 3064.216679] wlo1: associate with e8:d2:ff:d2:2f:35 (try 1/3)
[ 3064.220898] wlo1: RX AssocResp from e8:d2:ff:d2:2f:35 (capab=0x1511 status=0 aid=107)
[ 3064.783054] wlo1: associated
[ 3064.862619] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by e8:d2:ff:d2:2f:35
[ 4357.024688] wlo1: deauthenticating from e8:d2:ff:d2:2f:35 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 4361.105871] wlo1: Driver requested disconnection from AP 00:00:00:00:00:00
[ 4362.382946] mt7921e 0000:02:00.0 wlo1: renamed from wlan0
[ 4365.315952] wlo1: authenticate with e8:d2:ff:d2:2f:35
[ 4365.333933] wlo1: send auth to e8:d2:ff:d2:2f:35 (try 1/3)
[ 4365.336330] wlo1: authenticated
[ 4365.336554] wlo1: associate with e8:d2:ff:d2:2f:35 (try 1/3)
[ 4365.340673] wlo1: RX AssocResp from e8:d2:ff:d2:2f:35 (capab=0x1511 status=0 aid=114)
[ 4365.896018] wlo1: associated
[ 4365.952812] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by e8:d2:ff:d2:2f:35
[ 4366.514543] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[ 4562.262943] wlo1: deauthenticating from e8:d2:ff:d2:2f:35 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 4566.415093] wlo1: Driver requested disconnection from AP 00:00:00:00:00:00
[ 4567.668245] mt7921e 0000:02:00.0 wlo1: renamed from wlan0
[ 4570.542789] wlo1: authenticate with e8:d2:ff:d2:2f:30
[ 4570.720459] wlo1: send auth to e8:d2:ff:d2:2f:30 (try 1/3)
[ 4570.725825] wlo1: authenticated
[ 4570.726733] wlo1: associate with e8:d2:ff:d2:2f:30 (try 1/3)
[ 4570.732307] wlo1: RX AssocResp from e8:d2:ff:d2:2f:30 (capab=0x411 status=0 aid=2)
[ 4570.755136] wlo1: associated
[ 4570.777734] wlo1: Limiting TX power to 20 (20 - 0) dBm as advertised by e8:d2:ff:d2:2f:30
[ 4570.848886] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[ 4580.658910] wlo1: disconnect from AP e8:d2:ff:d2:2f:30 for new auth to e8:d2:ff:d2:2f:35
[ 4580.747485] wlo1: authenticate with e8:d2:ff:d2:2f:35
[ 4580.766476] wlo1: send auth to e8:d2:ff:d2:2f:35 (try 1/3)
[ 4580.768754] wlo1: authenticated
[ 4580.778625] wlo1: associate with e8:d2:ff:d2:2f:35 (try 1/3)
[ 4580.783081] wlo1: RX ReassocResp from e8:d2:ff:d2:2f:35 (capab=0x1511 status=0 aid=116)
[ 4581.340583] wlo1: associated
[ 4581.401435] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by e8:d2:ff:d2:2f:35
Odpowiedz
#15
0
Spokojnie to tylko logi Smile
Odpowiedz
#16
0
OK, ale nadal nie działa :-(
Odpowiedz
#17
0
Sprawdź, czy nie włączył się secure boot w BIOS i/lub fast boot w Windows (nie pamiętam, czy masz dualboot).
Odpowiedz
#18
0
W Bios jest Disabled. Przy uruchamianiu pojawiają się jakieś błędy.
Odpowiedz
#19
0
Dla mnie to jest jakiś bug, być może sam NM też ma tu swoją winę.
Spróbuj na starszym jądrze.
Odpowiedz
#20
0
Dziś Wifi działa, choć przy uruchamianiu wyskakują nadal jakieś błędy.
Odpowiedz


Skocz do:




Użytkownicy przeglądający ten wątek: 1 gości