Ocena wątku:
  • 0 głosów - średnia: 0
  • 1
  • 2
  • 3
  • 4
  • 5
nie działa kamerka laptopa
#1
0
Witam mam laptopa Lenovo g700, nie działa mi w nim kamerka, gdy uruchamiam cheese nie ma obrazu z kamerki, swieci sie tylko dioda przy kamerce i nie mogę też ani zrobić zdjęcia ani nagrać nic. Kamerka to Lenovo EasyCam

logi

Kod:
21∶13∶48 kernel: hid-generic 0003:09DA:9090.0002: input,hidraw1: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:14.0-3/input1
21∶13∶48 kernel: usb 3-3: Manufacturer: A4TECH
21∶12∶56 kernel: snd_hda_codec_idt hdaudioC0D0:      Mic=0xb
21∶12∶56 kernel: snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
21∶12∶55 kernel: usb 1-1.4: USB disconnect, device number 4
21∶12∶55 kernel: ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
21∶12∶55 kernel: ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffa800c0980000, irq=17
[b]21∶12∶55 kernel: uvcvideo 1-1.1:1.0: Entity type for entity Extension 4 was not initialized![/b]
[b]21∶12∶55 kernel: uvcvideo 1-1.1:1.0: Entity type for entity Extension 4 was not initialized![/b]
[b]21∶12∶55 kernel: uvcvideo 1-1.1:1.0: Entity type for entity Camera 1 was not initialized![/b]
[b]21∶12∶55 kernel: uvcvideo 1-1.1:1.0: Entity type for entity Processing 2 was not initialized![/b]
21∶12∶55 kernel: sd 6:0:0:0: [sdc] Attached SCSI removable disk
21∶12∶55 kernel: scsi 6:0:0:0: Direct-Access    Multiple Card  Reader    1.00 PQ: 0 ANSI: 4
21∶12∶55 kernel: psmouse serio1: elantech: Elan sample query result 04, 5c, 85
21∶12∶55 kernel: usb 1-1.4: SerialNumber: Alaska Day 2006
21∶12∶55 kernel: sd 2:0:0:0: [sdb] Attached SCSI disk
21∶12∶55 kernel: scsi 2:0:0:0: Direct-Access    ATA      ST1000LM014-1EJ1 LVD1 PQ: 0 ANSI: 5
21∶12∶55 kernel: usb 1-1.1: new high-speed USB device number 3 using ehci-pci
21∶12∶55 kernel: sd 0:0:0:0: [sda] Attached SCSI disk
21∶12∶55 kernel: scsi 0:0:0:0: Direct-Access    ATA      ADATA SU800      6A  PQ: 0 ANSI: 5
21∶12∶55 kernel: hub 2-1:1.0: 6 ports detected
21∶12∶55 kernel: usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
21∶12∶55 kernel: scsi host6: usb-storage 3-4:1.0
21∶12∶55 kernel: usb-storage 3-4:1.0: USB Mass Storage device detected
21∶12∶55 kernel: usb 3-4: SerialNumber: 058F63666485
21∶12∶55 kernel: hub 1-1:1.0: 6 ports detected
21∶12∶55 kernel: usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
21∶12∶55 kernel: i915 0000:00:02.0: fb0: i915drmfb frame buffer device
21∶12∶55 kernel: usb 2-1: new high-speed USB device number 2 using ehci-pci
21∶12∶55 kernel: i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
21∶12∶55 kernel: alx 0000:03:00.0 enp3s0: renamed from eth0
21∶12∶55 kernel: scsi host5: ahci
21∶12∶55 kernel: ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
21∶12∶55 kernel: alx 0000:03:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [7c:05:07:ff:2b:cd]
21∶12∶55 kernel: ahci 0000:00:1f.2: version 3.0
21∶12∶55 kernel: i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
21∶12∶55 kernel: rtc_cmos 00:01: setting system clock to 2020-10-03T19:12:52 UTC (1601752372)
21∶12∶55 kernel: platform eisa.0: EISA: Detected 0 cards
21∶12∶55 kernel: rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
21∶12∶55 kernel: hub 4-0:1.0: 4 ports detected
21∶12∶55 kernel: usb usb4: SerialNumber: 0000:00:14.0
21∶12∶55 kernel: xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
21∶12∶55 kernel: hub 3-0:1.0: 4 ports detected
21∶12∶55 kernel: usb usb3: SerialNumber: 0000:00:14.0
21∶12∶55 kernel: xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
21∶12∶55 kernel: hub 2-0:1.0: 2 ports detected
21∶12∶55 kernel: usb usb2: SerialNumber: 0000:00:1d.0
21∶12∶55 kernel: ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
21∶12∶55 kernel: hub 1-0:1.0: 2 ports detected
21∶12∶55 kernel: usb usb1: SerialNumber: 0000:00:1a.0
21∶12∶55 kernel: ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
21∶12∶55 kernel: thermal LNXTHERM:01: registered as thermal_zone1
21∶12∶55 kernel: pci 0000:03:00.0: set MSI_INTX_DISABLE_BUG flag
21∶12∶55 kernel: pci_bus 0000:03: resource 1 [mem 0xc0400000-0xc04fffff]
21∶12∶55 kernel: pci 0000:00:1c.2:  bridge window [mem 0xc0400000-0xc04fffff]
21∶12∶55 kernel: system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
21∶12∶55 kernel: pnp 00:04: Plug and Play ACPI device, IDs ETD060e PNP0f03 (active)
21∶12∶55 kernel: system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
21∶12∶55 kernel: pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
21∶12∶55 kernel: system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
21∶12∶55 kernel: pci 0000:00:02.0: vgaarb: bridge control possible
21∶12∶55 kernel: pci_bus 0000:00: root bus resource [bus 00-3e]
21∶12∶55 kernel: acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
Odpowiedz
#2
0
Odpowiedz
#3
0
nie wiem czy wszystko robię dobrze

Kod:
inxi -Fxz
System:
  Kernel: 5.4.0-48-generic x86_64 bits: 64 compiler: gcc v: 9.3.0
  Desktop: Cinnamon 4.6.7 Distro: Linux Mint 20 Ulyana
  base: Ubuntu 20.04 focal
Machine:
  Type: Laptop System: LENOVO product: 20251 v: Lenovo G700 serial: <filter>
  Mobo: LENOVO model: G700 serial: <filter> UEFI: LENOVO v: 7ACN24WW
  date: 06/25/2013
Battery:
  ID-1: BAT0 charge: 34.2 Wh condition: 36.2/40.4 Wh (90%)
  model: Lenovo L11L6Y01 status: Discharging
CPU:
  Topology: Quad Core model: Intel Core i7-3612QM bits: 64 type: MT MCP
  arch: Ivy Bridge rev: 9 L2 cache: 6144 KiB
  flags: avx lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 33521
  Speed: 1197 MHz min/max: 1200/2100 MHz Core speeds (MHz): 1: 1197 2: 1198
  3: 1197 4: 1197 5: 1197 6: 1198 7: 1197 8: 1197
Graphics:
  Device-1: Intel 3rd Gen Core processor Graphics vendor: Lenovo
  driver: i915 v: kernel bus ID: 00:02.0
  Display: x11 server: X.Org 1.20.8 driver: modesetting unloaded: fbdev,vesa
  resolution: 1600x900~60Hz
  OpenGL: renderer: Mesa DRI Intel HD Graphics 4000 (IVB GT2)
  v: 4.2 Mesa 20.0.8 direct render: Yes
Audio:
  Device-1: Intel 7 Series/C216 Family High Definition Audio vendor: Lenovo
  driver: snd_hda_intel v: kernel bus ID: 00:1b.0
  Sound Server: ALSA v: k5.4.0-48-generic
Network:
  Device-1: Qualcomm Atheros AR9485 Wireless Network Adapter vendor: Lenovo
  driver: ath9k v: kernel port: 3040 bus ID: 02:00.0
  IF: wlp2s0 state: up mac: <filter>
  Device-2: Qualcomm Atheros QCA8172 Fast Ethernet vendor: Lenovo
  driver: alx v: kernel port: 2000 bus ID: 03:00.0
  IF: enp3s0 state: down mac: <filter>
  Device-3: Qualcomm Atheros AR3012 Bluetooth 4.0 type: USB driver: btusb
  bus ID: 1-1.4:7
Drives:
  Local Storage: total: 1.03 TiB used: 17.08 GiB (1.6%)
  ID-1: /dev/sda vendor: A-Data model: SU800 size: 119.24 GiB
  ID-2: /dev/sdb vendor: Seagate model: ST1000LM014-1EJ164 size: 931.51 GiB
Partition:
  ID-1: / size: 36.42 GiB used: 12.04 GiB (33.1%) fs: ext4 dev: /dev/sda2
  ID-2: /home size: 78.37 GiB used: 5.04 GiB (6.4%) fs: ext4 dev: /dev/sda3
Sensors:
  System Temperatures: cpu: 43.0 C mobo: 43.0 C
  Fan Speeds (RPM): N/A
Info:
  Processes: 239 Uptime: 30m Memory: 7.66 GiB used: 1.22 GiB (15.9%)
  Init: systemd runlevel: 5 Compilers: gcc: 9.3.0 Shell: bash v: 5.0.17
  inxi: 3.0.38


osobiście tu nic nie widzę na temat kamerki

Dodano po pewnym czasie:
Kod:
bobek@bobek-Lenovo-G700:~$ lsusb
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 005: ID 0cf3:3004 Qualcomm Atheros Communications AR3012 Bluetooth 4.0
Bus 001 Device 003: ID 5986:0295 Acer, Inc
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 003: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
bobek@bobek-Lenovo-G700:~$ lspci
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C216 Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C216 Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C216 Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C216 Chipset Family SMBus Controller (rev 04)
02:00.0 Network controller: Qualcomm Atheros AR9485 Wireless Network Adapter (rev 01)
03:00.0 Ethernet controller: Qualcomm Atheros QCA8172 Fast Ethernet (rev 10)

Dodano po pewnym czasie:
Kod:
bobek@bobek-Lenovo-G700:~$ dmesg
[    0.000000] microcode: microcode updated early to revision 0x21, date = 2019-02-13
[    0.000000] Linux version 5.4.0-48-generic (buildd@lcy01-amd64-010) (gcc version 9.3.0 (Ubuntu 9.3.0-10ubuntu2)) #52-Ubuntu SMP Thu Sep 10 10:58:49 UTC 2020 (Ubuntu 5.4.0-48.52-generic 5.4.60)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-48-generic root=UUID=3c2848f3-df41-4f73-87da-ca48b0b70965 ro quiet splash
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai 
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000087fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000a4daffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000a4db0000-0x00000000a61affff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000a61b0000-0x00000000aa7befff] usable
[    0.000000] BIOS-e820: [mem 0x00000000aa7bf000-0x00000000aaebefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000aaebf000-0x00000000aafbefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000aafbf000-0x00000000aaffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000aafff000-0x00000000aaffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ab000000-0x00000000af9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000024f5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0xa3bec018-0xa3bfc057] usable ==> usable
[    0.000000] e820: update [mem 0xa3bec018-0xa3bfc057] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000087fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000088000-0x00000000000bffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] reserve setup_data: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000020200000-0x0000000040003fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000040004000-0x0000000040004fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000040005000-0x00000000a3bec017] usable
[    0.000000] reserve setup_data: [mem 0x00000000a3bec018-0x00000000a3bfc057] usable
[    0.000000] reserve setup_data: [mem 0x00000000a3bfc058-0x00000000a4daffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000a4db0000-0x00000000a61affff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000a61b0000-0x00000000aa7befff] usable
[    0.000000] reserve setup_data: [mem 0x00000000aa7bf000-0x00000000aaebefff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000aaebf000-0x00000000aafbefff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000aafbf000-0x00000000aaffefff] ACPI data
[    0.000000] reserve setup_data: [mem 0x00000000aafff000-0x00000000aaffffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000ab000000-0x00000000af9fffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000024f5fffff] usable
[    0.000000] efi: EFI v2.31 by INSYDE Corp.
[    0.000000] efi:  ACPI=0xaaffe000  ACPI 2.0=0xaaffe014  SMBIOS=0xaaebef98
[    0.000000] secureboot: Secure boot disabled
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 20251/G700, BIOS 7ACN24WW 06/25/2013
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2095.239 MHz processor
[    0.000051] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000053] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000061] last_pfn = 0x24f600 max_arch_pfn = 0x400000000
[    0.000066] MTRR default type: uncachable
[    0.000067] MTRR fixed ranges enabled:
[    0.000068]   00000-9FFFF write-back
[    0.000069]   A0000-BFFFF uncachable
[    0.000070]   C0000-E7FFF write-protect
[    0.000071]   E8000-EFFFF write-combining
[    0.000072]   F0000-FFFFF write-protect
[    0.000073] MTRR variable ranges enabled:
[    0.000075]   0 base 000000000 mask F80000000 write-back
[    0.000076]   1 base 080000000 mask FE0000000 write-back
[    0.000077]   2 base 0A0000000 mask FF8000000 write-back
[    0.000078]   3 base 0A8000000 mask FFE000000 write-back
[    0.000079]   4 base 0AA000000 mask FFF000000 write-back
[    0.000080]   5 base 0FFC00000 mask FFFC00000 write-protect
[    0.000081]   6 base 100000000 mask F00000000 write-back
[    0.000082]   7 base 200000000 mask F80000000 write-back
[    0.000083]   8 base 24F600000 mask FFFE00000 uncachable
[    0.000084]   9 base 24F800000 mask FFF800000 uncachable
[    0.000421] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT 
[    0.000563] last_pfn = 0xab000 max_arch_pfn = 0x400000000
[    0.013589] check: Scanning 1 areas for low memory corruption
[    0.014594] secureboot: Secure boot disabled
[    0.014595] RAMDISK: [mem 0x3b834000-0x3fffdfff]
[    0.014604] ACPI: Early table checksum verification disabled
[    0.014608] ACPI: RSDP 0x00000000AAFFE014 000024 (v02 LENOVO)
[    0.014612] ACPI: XSDT 0x00000000AAFFE210 0000A4 (v01 LENOVO CB-01    00000001      01000013)
[    0.014619] ACPI: FACP 0x00000000AAFFA000 00010C (v05 LENOVO CB-01    00000001 ACPI 00040000)
[    0.014626] ACPI: DSDT 0x00000000AAFE7000 00F90B (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.014630] ACPI: FACS 0x00000000AAFA9000 000040
[    0.014633] ACPI: SLIC 0x00000000AAFFD000 000176 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.014636] ACPI: UEFI 0x00000000AAFFC000 000236 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.014640] ACPI: ASF! 0x00000000AAFFB000 0000A5 (v32 LENOVO CB-01    00000001 ACPI 00040000)
[    0.014643] ACPI: HPET 0x00000000AAFF9000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.014647] ACPI: APIC 0x00000000AAFF8000 00008C (v03 LENOVO CB-01    00000001 ACPI 00040000)
[    0.014650] ACPI: MCFG 0x00000000AAFF7000 00003C (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.014653] ACPI: WDAT 0x00000000AAFE6000 000224 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.014657] ACPI: SSDT 0x00000000AAFE4000 001068 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.014660] ACPI: BOOT 0x00000000AAFE2000 000028 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.014664] ACPI: ASPT 0x00000000AAFE0000 000034 (v07 LENOVO CB-01    00000001 ACPI 00040000)
[    0.014667] ACPI: DBGP 0x00000000AAFDF000 000034 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.014670] ACPI: FPDT 0x00000000AAFDD000 000044 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.014674] ACPI: SSDT 0x00000000AAFDB000 000860 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.014677] ACPI: SSDT 0x00000000AAFDA000 000B22 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.014681] ACPI: BGRT 0x00000000AAFD9000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.014692] ACPI: Local APIC address 0xfee00000
[    0.014794] No NUMA configuration found
[    0.014795] Faking a node at [mem 0x0000000000000000-0x000000024f5fffff]
[    0.014808] NODE_DATA(0) allocated [mem 0x24f5d0000-0x24f5fafff]
[    0.015169] Zone ranges:
[    0.015170]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.015172]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.015173]   Normal   [mem 0x0000000100000000-0x000000024f5fffff]
[    0.015174]   Device   empty
[    0.015175] Movable zone start for each node
[    0.015179] Early memory node ranges
[    0.015180]   node   0: [mem 0x0000000000001000-0x0000000000087fff]
[    0.015181]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.015182]   node   0: [mem 0x0000000020200000-0x0000000040003fff]
[    0.015182]   node   0: [mem 0x0000000040005000-0x00000000a4daffff]
[    0.015183]   node   0: [mem 0x00000000a61b0000-0x00000000aa7befff]
[    0.015184]   node   0: [mem 0x00000000aafff000-0x00000000aaffffff]
[    0.015185]   node   0: [mem 0x0000000100000000-0x000000024f5fffff]
[    0.015526] Zeroed struct page in unavailable ranges: 30906 pages
[    0.015528] Initmem setup node 0 [mem 0x0000000000001000-0x000000024f5fffff]
[    0.015529] On node 0 totalpages: 2066246
[    0.015531]   DMA zone: 64 pages used for memmap
[    0.015531]   DMA zone: 24 pages reserved
[    0.015532]   DMA zone: 3975 pages, LIFO batch:0
[    0.015602]   DMA32 zone: 10759 pages used for memmap
[    0.015603]   DMA32 zone: 688575 pages, LIFO batch:63
[    0.029559]   Normal zone: 21464 pages used for memmap
[    0.029561]   Normal zone: 1373696 pages, LIFO batch:63
[    0.051703] Reserving Intel graphics memory at [mem 0xaba00000-0xaf9fffff]
[    0.051902] ACPI: PM-Timer IO Port: 0x408
[    0.051903] ACPI: Local APIC address 0xfee00000
[    0.051924] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.051926] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.051928] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.051930] ACPI: IRQ0 used by override.
[    0.051931] ACPI: IRQ9 used by override.
[    0.051933] Using ACPI (MADT) for SMP configuration information
[    0.051935] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.051948] e820: update [mem 0xa82ac000-0xa8354fff] usable ==> reserved
[    0.051959] TSC deadline timer available
[    0.051961] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.051993] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.051995] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
[    0.051996] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[    0.051998] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.052000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[    0.052002] PM: Registered nosave memory: [mem 0xa3bec000-0xa3becfff]
[    0.052004] PM: Registered nosave memory: [mem 0xa3bfc000-0xa3bfcfff]
[    0.052006] PM: Registered nosave memory: [mem 0xa4db0000-0xa61affff]
[    0.052008] PM: Registered nosave memory: [mem 0xa82ac000-0xa8354fff]
[    0.052010] PM: Registered nosave memory: [mem 0xaa7bf000-0xaaebefff]
[    0.052011] PM: Registered nosave memory: [mem 0xaaebf000-0xaafbefff]
[    0.052012] PM: Registered nosave memory: [mem 0xaafbf000-0xaaffefff]
[    0.052014] PM: Registered nosave memory: [mem 0xab000000-0xaf9fffff]
[    0.052014] PM: Registered nosave memory: [mem 0xafa00000-0xefffffff]
[    0.052015] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[    0.052016] PM: Registered nosave memory: [mem 0xf4000000-0xfeafffff]
[    0.052016] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[    0.052017] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[    0.052018] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.052018] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.052019] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.052020] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.052020] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.052021] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.052022] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.052022] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
[    0.052023] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[    0.052025] [mem 0xafa00000-0xefffffff] available for PCI devices
[    0.052026] Booting paravirtualized kernel on bare hardware
[    0.052030] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.052038] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.052288] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144
[    0.052297] pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152
[    0.052298] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[    0.052339] Built 1 zonelists, mobility grouping on.  Total pages: 2033935
[    0.052340] Policy zone: Normal
[    0.052342] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-48-generic root=UUID=3c2848f3-df41-4f73-87da-ca48b0b70965 ro quiet splash
[    0.052969] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.053239] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.053352] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.057497] Calgary: detecting Calgary via BIOS EBDA area
[    0.057499] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.082212] Memory: 7871076K/8264984K available (14339K kernel code, 2398K rwdata, 4956K rodata, 2716K init, 4988K bss, 393908K reserved, 0K cma-reserved)
[    0.082219] random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
[    0.082385] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.082399] Kernel/User page tables isolation: enabled
[    0.082416] ftrace: allocating 44523 entries in 174 pages
[    0.103625] rcu: Hierarchical RCU implementation.
[    0.103627] rcu:     RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[    0.103628]     Tasks RCU enabled.
[    0.103629] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.103629] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.107580] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
[    0.107812] random: crng done (trusting CPU's manufacturer)
[    0.107841] Console: colour dummy device 80x25
[    0.107847] printk: console [tty0] enabled
[    0.107866] ACPI: Core revision 20190816
[    0.108052] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.108068] APIC: Switch to symmetric I/O mode setup
[    0.108140] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.108587] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.128069] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1e339f08a2e, max_idle_ns: 440795251162 ns
[    0.128074] Calibrating delay loop (skipped), value calculated using timer frequency.. 4190.47 BogoMIPS (lpj=8380956)
[    0.128076] pid_max: default: 32768 minimum: 301
[    0.135535] LSM: Security Framework initializing
[    0.136087] Yama: becoming mindful.
[    0.136137] AppArmor: AppArmor initialized
[    0.136192] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.136207] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.136227] *** VALIDATE tmpfs ***
[    0.136419] *** VALIDATE proc ***
[    0.136484] *** VALIDATE cgroup1 ***
[    0.136486] *** VALIDATE cgroup2 ***
[    0.136542] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.136558] process: using mwait in idle threads
[    0.136561] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.136562] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.136566] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.136568] Spectre V2 : Mitigation: Full generic retpoline
[    0.136568] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.136569] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.136571] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.136571] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[    0.136573] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.136577] SRBDS: Vulnerable: No microcode
[    0.136577] MDS: Mitigation: Clear CPU buffers
[    0.136790] Freeing SMP alternatives memory: 40K
[    0.140165] smpboot: CPU0: Intel(R) Core(TM) i7-3612QM CPU @ 2.10GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.140307] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.140313] ... version:                3
[    0.140314] ... bit width:              48
[    0.140315] ... generic registers:      4
[    0.140315] ... value mask:             0000ffffffffffff
[    0.140316] ... max period:             00007fffffffffff
[    0.140316] ... fixed-purpose events:   3
[    0.140317] ... event mask:             000000070000000f
[    0.140359] rcu: Hierarchical SRCU implementation.
[    0.141493] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.141596] smp: Bringing up secondary CPUs ...
[    0.141714] x86: Booting SMP configuration:
[    0.141715] .... node  #0, CPUs:      #1
[    0.144071] TSC synchronization [CPU#0 -> CPU#1]:
[    0.144071] Measured 211416932 cycles TSC warp between CPUs, turning off TSC clock.
[    0.144071] tsc: Marking TSC unstable due to check_tsc_sync_source failed
[    0.144178] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    0.144250]  #2 #3 #4 #5 #6 #7
[    0.149366] smp: Brought up 1 node, 8 CPUs
[    0.149366] smpboot: Max logical packages: 1
[    0.149366] smpboot: Total of 8 processors activated (33523.82 BogoMIPS)
[    0.152444] devtmpfs: initialized
[    0.152444] x86/mm: Memory block size: 128MB
[    0.153030] PM: Registering ACPI NVS region [mem 0xaaebf000-0xaafbefff] (1048576 bytes)
[    0.153030] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.153030] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.153030] pinctrl core: initialized pinctrl subsystem
[    0.153030] PM: RTC time: 21:18:32, date: 2020-10-05
[    0.153030] NET: Registered protocol family 16
[    0.153030] audit: initializing netlink subsys (disabled)
[    0.153030] audit: type=2000 audit(1601932712.044:1): state=initialized audit_enabled=0 res=1
[    0.153030] EISA bus registered
[    0.153030] cpuidle: using governor ladder
[    0.153030] cpuidle: using governor menu
[    0.153030] Simple Boot Flag at 0x44 set to 0x1
[    0.153030] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.153030] ACPI: bus type PCI registered
[    0.153030] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.153030] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.153030] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.153030] PCI: Using configuration type 1 for base access
[    0.153030] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.153030] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.156919] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.156919] ACPI: Added _OSI(Module Device)
[    0.156919] ACPI: Added _OSI(Processor Device)
[    0.156919] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.156919] ACPI: Added _OSI(Processor Aggregator Device)
[    0.156919] ACPI: Added _OSI(Linux-Dell-Video)
[    0.156919] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.156919] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.170227] ACPI: 4 ACPI AML tables successfully acquired and loaded
[    0.172457] ACPI: Dynamic OEM Table Load:
[    0.172468] ACPI: SSDT 0xFFFF88BEC5B3F000 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20121220)
[    0.173353] ACPI: Dynamic OEM Table Load:
[    0.173353] ACPI: SSDT 0xFFFF88BEC5A24000 000303 (v01 PmRef  ApIst    00003000 INTL 20121220)
[    0.173434] ACPI: Dynamic OEM Table Load:
[    0.173434] ACPI: SSDT 0xFFFF88BEC569D000 000119 (v01 PmRef  ApCst    00003000 INTL 20121220)
[    0.200360] ACPI: EC: EC started
[    0.200360] ACPI: EC: interrupt blocked
[    0.212427] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    0.212429] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x1b, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.212431] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
[    0.212431] ACPI: Interpreter enabled
[    0.212461] ACPI: (supports S0 S3 S4 S5)
[    0.212462] ACPI: Using IOAPIC for interrupt routing
[    0.212498] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.236309] ACPI: watchdog: Skipping WDAT on this system because it uses RTC SRAM
[    0.236323] ACPI: Enabled 5 GPEs in block 00 to 3F
[    0.266222] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.266229] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.266491] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.267163] PCI host bridge to bus 0000:00
[    0.267166] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.267167] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.267169] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.267170] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.267171] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.267172] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.267173] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.267175] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.267176] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.267177] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.267178] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.267180] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfeafffff window]
[    0.267181] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.267192] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[    0.267314] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[    0.267328] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit]
[    0.267335] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.267340] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.267354] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.267518] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.267546] pci 0000:00:14.0: reg 0x10: [mem 0xc0600000-0xc060ffff 64bit]
[    0.267625] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.267747] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.267775] pci 0000:00:16.0: reg 0x10: [mem 0xc0614000-0xc061400f 64bit]
[    0.267857] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.267966] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.267989] pci 0000:00:1a.0: reg 0x10: [mem 0xc0619000-0xc06193ff]
[    0.268084] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.268208] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.268232] pci 0000:00:1b.0: reg 0x10: [mem 0xc0610000-0xc0613fff 64bit]
[    0.268320] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.268437] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.268545] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.268671] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[    0.268779] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.268902] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[    0.269010] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.269139] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.269164] pci 0000:00:1d.0: reg 0x10: [mem 0xc0618000-0xc06183ff]
[    0.269257] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.269374] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
[    0.269595] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    0.269617] pci 0000:00:1f.2: reg 0x10: [io  0x3088-0x308f]
[    0.269625] pci 0000:00:1f.2: reg 0x14: [io  0x3094-0x3097]
[    0.269633] pci 0000:00:1f.2: reg 0x18: [io  0x3080-0x3087]
[    0.269642] pci 0000:00:1f.2: reg 0x1c: [io  0x3090-0x3093]
[    0.269650] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
[    0.269659] pci 0000:00:1f.2: reg 0x24: [mem 0xc0617000-0xc06177ff]
[    0.269706] pci 0000:00:1f.2: PME# supported from D3hot
[    0.269815] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.269836] pci 0000:00:1f.3: reg 0x10: [mem 0xc0615000-0xc06150ff 64bit]
[    0.269858] pci 0000:00:1f.3: reg 0x20: [io  0x3040-0x305f]
[    0.270041] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.270147] pci 0000:02:00.0: [168c:0032] type 00 class 0x028000
[    0.270213] pci 0000:02:00.0: reg 0x10: [mem 0xc0500000-0xc057ffff 64bit]
[    0.270304] pci 0000:02:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[    0.270451] pci 0000:02:00.0: supports D1 D2
[    0.270453] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.270646] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.270653] pci 0000:00:1c.1:   bridge window [mem 0xc0500000-0xc05fffff]
[    0.270785] pci 0000:03:00.0: [1969:10a0] type 00 class 0x020000
[    0.270940] pci 0000:03:00.0: reg 0x10: [mem 0xc0400000-0xc043ffff 64bit]
[    0.270989] pci 0000:03:00.0: reg 0x18: [io  0x2000-0x207f]
[    0.271496] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.271838] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.271841] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.271846] pci 0000:00:1c.2:   bridge window [mem 0xc0400000-0xc04fffff]
[    0.272704] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.272800] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.272894] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.272987] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.273080] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.273173] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.273266] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.273359] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.273602] ACPI: EC: interrupt unblocked
[    0.273612] ACPI: EC: event unblocked

Dodano po pewnym czasie:
Kod:
[    0.273620] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x1b, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.273621] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events
[    0.273696] iommu: Default domain type: Translated
[    0.273696] SCSI subsystem initialized
[    0.273696] libata version 3.00 loaded.
[    0.273696] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.273696] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.273696] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.273696] vgaarb: loaded
[    0.273696] ACPI: bus type USB registered
[    0.273696] usbcore: registered new interface driver usbfs
[    0.273696] usbcore: registered new interface driver hub
[    0.273696] usbcore: registered new device driver usb
[    0.273696] pps_core: LinuxPPS API ver. 1 registered
[    0.273696] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[    0.273696] PTP clock support registered
[    0.273696] EDAC MC: Ver: 3.0.0
[    0.273696] Registered efivars operations
[    0.273696] PCI: Using ACPI for IRQ routing
[    0.273771] PCI: pci_cache_line_size set to 64 bytes
[    0.273842] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[    0.273843] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[    0.273844] e820: reserve RAM buffer [mem 0xa3bec018-0xa3ffffff]
[    0.273845] e820: reserve RAM buffer [mem 0xa4db0000-0xa7ffffff]
[    0.273846] e820: reserve RAM buffer [mem 0xa82ac000-0xabffffff]
[    0.273847] e820: reserve RAM buffer [mem 0xaa7bf000-0xabffffff]
[    0.273849] e820: reserve RAM buffer [mem 0xab000000-0xabffffff]
[    0.273850] e820: reserve RAM buffer [mem 0x24f600000-0x24fffffff]
[    0.273975] NetLabel: Initializing
[    0.273976] NetLabel:  domain hash size = 128
[    0.273977] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.273993] NetLabel:  unlabeled traffic allowed by default
[    0.276732] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.276737] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.278768] clocksource: Switched to clocksource hpet
[    0.291243] *** VALIDATE bpf ***
[    0.291349] VFS: Disk quotas dquot_6.6.0
[    0.291367] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.291401] *** VALIDATE ramfs ***
[    0.291405] *** VALIDATE hugetlbfs ***
[    0.291500] AppArmor: AppArmor Filesystem Enabled
[    0.291532] pnp: PnP ACPI init
[    0.291723] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.291725] system 00:00: [io  0x1000-0x100f] has been reserved
[    0.291727] system 00:00: [io  0xffff] has been reserved
[    0.291728] system 00:00: [io  0xffff] has been reserved
[    0.291730] system 00:00: [io  0x0400-0x0453] has been reserved
[    0.291731] system 00:00: [io  0x0458-0x047f] has been reserved
[    0.291733] system 00:00: [io  0x0500-0x057f] has been reserved
[    0.291734] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.291741] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.291770] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.291843] system 00:02: [io  0x0454-0x0457] has been reserved
[    0.291847] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.292024] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.292057] pnp 00:04: Plug and Play ACPI device, IDs ETD060e PNP0f03 (active)
[    0.292275] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.292277] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.292279] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.292280] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.292282] system 00:05: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.292284] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.292285] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.292287] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[    0.292289] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.292290] system 00:05: [mem 0xafa00000-0xafa00fff] has been reserved
[    0.292294] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.292648] system 00:06: [mem 0x20000000-0x201fffff] has been reserved
[    0.292650] system 00:06: [mem 0x40004000-0x40004fff] has been reserved
[    0.292654] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.292688] pnp: PnP ACPI: found 7 devices
[    0.294760] thermal_sys: Registered thermal governor 'fair_share'
[    0.294761] thermal_sys: Registered thermal governor 'bang_bang'
[    0.294762] thermal_sys: Registered thermal governor 'step_wise'
[    0.294763] thermal_sys: Registered thermal governor 'user_space'
[    0.294763] thermal_sys: Registered thermal governor 'power_allocator'
[    0.299266] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.299305] pci 0000:02:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[    0.299313] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.299330] pci 0000:02:00.0: BAR 6: assigned [mem 0xc0580000-0xc058ffff pref]
[    0.299332] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.299337] pci 0000:00:1c.1:   bridge window [mem 0xc0500000-0xc05fffff]
[    0.299346] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.299350] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.299355] pci 0000:00:1c.2:   bridge window [mem 0xc0400000-0xc04fffff]
[    0.299365] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.299366] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.299368] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.299369] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.299370] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.299372] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.299373] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.299374] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.299376] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.299377] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.299378] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.299380] pci_bus 0000:00: resource 15 [mem 0xafa00000-0xfeafffff window]
[    0.299381] pci_bus 0000:02: resource 1 [mem 0xc0500000-0xc05fffff]
[    0.299383] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.299384] pci_bus 0000:03: resource 1 [mem 0xc0400000-0xc04fffff]
[    0.299511] NET: Registered protocol family 2
[    0.299731] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.299782] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.299956] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.300064] TCP: Hash tables configured (established 65536 bind 65536)
[    0.300128] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.300157] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.300221] NET: Registered protocol family 1
[    0.300229] NET: Registered protocol family 44
[    0.300241] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    1.380222] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x662 took 1053208 usecs
[    1.400209] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x662 took 19494 usecs
[    1.400234] pci 0000:03:00.0: set MSI_INTX_DISABLE_BUG flag
[    1.400245] PCI: CLS 64 bytes, default 64
[    1.400294] Trying to unpack rootfs image as initramfs...
[    2.642248] Freeing initrd memory: 73512K
[    2.642277] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    2.642279] software IO TLB: mapped [mem 0x9f1c0000-0xa31c0000] (64MB)
[    2.642690] check: Scanning for low memory corruption every 60 seconds
[    2.643258] Initialise system trusted keyrings
[    2.643268] Key type blacklist registered
[    2.643314] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    2.644870] zbud: loaded
[    2.645305] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    2.645513] fuse: init (API version 7.31)
[    2.645532] *** VALIDATE fuse ***
[    2.645534] *** VALIDATE fuse ***
[    2.645654] Platform Keyring initialized
[    2.650538] Key type asymmetric registered
[    2.650539] Asymmetric key parser 'x509' registered
[    2.650548] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    2.650612] io scheduler mq-deadline registered
[    2.651484] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    2.651545] efifb: probing for efifb
[    2.651563] efifb: showing boot graphics
[    2.653018] efifb: framebuffer at 0xb0000000, using 5628k, total 5625k
[    2.653020] efifb: mode is 1600x900x32, linelength=6400, pages=1
[    2.653020] efifb: scrolling: redraw
[    2.653022] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    2.653074] fbcon: Deferring console take-over
[    2.653075] fb0: EFI VGA frame buffer device
[    2.653084] intel_idle: MWAIT substates: 0x21120
[    2.653085] intel_idle: v0.4.1 model 0x3A
[    2.653564] intel_idle: lapic_timer_reliable_states 0xffffffff
[    2.653774] ACPI: AC Adapter [AC0] (off-line)
[    2.653856] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    2.653876] ACPI: Lid Switch [LID]
[    2.653911] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    2.653960] ACPI: Power Button [PWRF]
[    2.655793] thermal LNXTHERM:00: registered as thermal_zone0
[    2.655795] ACPI: Thermal Zone [THRM] (48 C)
[    2.656270] thermal LNXTHERM:01: registered as thermal_zone1
[    2.656271] ACPI: Thermal Zone [THM2] (48 C)
[    2.656438] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    2.658616] Linux agpgart interface v0.103
[    2.661528] loop: module loaded
[    2.661756] libphy: Fixed MDIO Bus: probed
[    2.661758] tun: Universal TUN/TAP device driver, 1.6
[    2.661794] PPP generic driver version 2.4.2
[    2.661857] VFIO - User Level meta-driver version: 0.3
[    2.661964] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.661967] ehci-pci: EHCI PCI platform driver
[    2.662106] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    2.662113] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    2.662127] ehci-pci 0000:00:1a.0: debug port 2
[    2.666052] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    2.666067] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc0619000
[    2.680125] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    2.680183] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    2.680185] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.680186] usb usb1: Product: EHCI Host Controller
[    2.680188] usb usb1: Manufacturer: Linux 5.4.0-48-generic ehci_hcd
[    2.680189] usb usb1: SerialNumber: 0000:00:1a.0
[    2.680811] hub 1-0:1.0: USB hub found
[    2.680820] hub 1-0:1.0: 2 ports detected
[    2.681993] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    2.681998] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    2.682010] ehci-pci 0000:00:1d.0: debug port 2

Dodano po pewnym czasie:
Kod:
[    2.682837] battery: ACPI: Battery Slot [BAT0] (battery present)
[    2.685917] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    2.685929] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc0618000
[    2.700125] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    2.700174] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    2.700175] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.700177] usb usb2: Product: EHCI Host Controller
[    2.700178] usb usb2: Manufacturer: Linux 5.4.0-48-generic ehci_hcd
[    2.700179] usb usb2: SerialNumber: 0000:00:1d.0
[    2.700412] hub 2-0:1.0: USB hub found
[    2.700419] hub 2-0:1.0: 2 ports detected
[    2.700617] ehci-platform: EHCI generic platform driver
[    2.700627] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.700632] ohci-pci: OHCI PCI platform driver
[    2.700643] ohci-platform: OHCI generic platform driver
[    2.700650] uhci_hcd: USB Universal Host Controller Interface driver
[    2.700804] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.700809] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    2.701874] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x000000000000b930
[    2.701879] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    2.702038] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    2.702040] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.702041] usb usb3: Product: xHCI Host Controller
[    2.702042] usb usb3: Manufacturer: Linux 5.4.0-48-generic xhci-hcd
[    2.702043] usb usb3: SerialNumber: 0000:00:14.0
[    2.702239] hub 3-0:1.0: USB hub found
[    2.702252] hub 3-0:1.0: 4 ports detected
[    2.702789] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.702795] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    2.702798] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    2.702840] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[    2.702842] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.702843] usb usb4: Product: xHCI Host Controller
[    2.702844] usb usb4: Manufacturer: Linux 5.4.0-48-generic xhci-hcd
[    2.702845] usb usb4: SerialNumber: 0000:00:14.0
[    2.703064] hub 4-0:1.0: USB hub found
[    2.703076] hub 4-0:1.0: 4 ports detected
[    2.703660] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    2.708465] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.708470] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.708765] mousedev: PS/2 mouse device common for all mice
[    2.709136] rtc_cmos 00:01: RTC can wake from S4
[    2.709380] rtc_cmos 00:01: registered as rtc0
[    2.709396] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[    2.709403] i2c /dev entries driver
[    2.709447] device-mapper: uevent: version 1.0.3
[    2.709528] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: [email protected]
[    2.709549] platform eisa.0: Probing EISA bus 0
[    2.709551] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    2.709553] platform eisa.0: Cannot allocate resource for EISA slot 1
[    2.709554] platform eisa.0: Cannot allocate resource for EISA slot 2
[    2.709555] platform eisa.0: Cannot allocate resource for EISA slot 3
[    2.709556] platform eisa.0: Cannot allocate resource for EISA slot 4
[    2.709557] platform eisa.0: Cannot allocate resource for EISA slot 5
[    2.709558] platform eisa.0: Cannot allocate resource for EISA slot 6
[    2.709560] platform eisa.0: Cannot allocate resource for EISA slot 7
[    2.709561] platform eisa.0: Cannot allocate resource for EISA slot 8
[    2.709562] platform eisa.0: EISA: Detected 0 cards
[    2.709567] intel_pstate: Intel P-state driver initializing
[    2.710191] ledtrig-cpu: registered to indicate activity on CPUs
[    2.710194] EFI Variables Facility v0.08 2004-May-17
[    2.717547] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    2.728697] drop_monitor: Initializing network drop monitor service
[    2.728903] NET: Registered protocol family 10
[    2.737993] Segment Routing with IPv6
[    2.738019] NET: Registered protocol family 17
[    2.738180] Key type dns_resolver registered
[    2.738914] RAS: Correctable Errors collector initialized.
[    2.738976] microcode: sig=0x306a9, pf=0x10, revision=0x21
[    2.739092] microcode: Microcode Update Driver: v2.2.
[    2.739096] IPI shorthand broadcast: enabled
[    2.739194] registered taskstats version 1
[    2.739203] Loading compiled-in X.509 certificates
[    2.740477] Loaded X.509 cert 'Build time autogenerated kernel key: 5aa626cbe865232f20021a0a6b2c5343f252875d'
[    2.740524] zswap: loaded using pool lzo/zbud
[    2.740771] Key type ._fscrypt registered
[    2.740772] Key type .fscrypt registered
[    2.749311] Key type big_key registered
[    2.753540] Key type encrypted registered
[    2.753544] AppArmor: AppArmor sha1 policy hashing enabled
[    2.753698] integrity: Loading X.509 certificate: UEFI:MokListRT
[    2.753729] integrity: Loaded X.509 cert 'SomeOrg: shim: a01ee84e9b37ace407961cc468c5909447878469'
[    2.753730] integrity: Loading X.509 certificate: UEFI:MokListRT
[    2.754290] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
[    2.756807] ima: No TPM chip found, activating TPM-bypass!
[    2.756811] ima: Allocated hash algorithm: sha1
[    2.756819] ima: No architecture policies found
[    2.756830] evm: Initialising EVM extended attributes:
[    2.756830] evm: security.selinux
[    2.756831] evm: security.SMACK64
[    2.756831] evm: security.SMACK64EXEC
[    2.756832] evm: security.SMACK64TRANSMUTE
[    2.756832] evm: security.SMACK64MMAP
[    2.756833] evm: security.apparmor
[    2.756833] evm: security.ima
[    2.756834] evm: security.capability
[    2.756835] evm: HMAC attrs: 0x1
[    2.757265] PM:   Magic number: 8:898:347
[    2.757300]  pci0000:00: hash matches
[    2.757399] rtc_cmos 00:01: setting system clock to 2020-10-05T21:18:35 UTC (1601932715)
[    2.757653] Unstable clock detected, switching default tracing clock to "global"
               If you want to keep using the local clock, then add:
                 "trace_clock=local"
               on the kernel command line
[    2.759026] Freeing unused decrypted memory: 2040K
[    2.759551] Freeing unused kernel image memory: 2716K
[    2.780159] Write protecting the kernel read-only data: 22528k
[    2.780776] Freeing unused kernel image memory: 2008K
[    2.781048] Freeing unused kernel image memory: 1188K
[    2.794044] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.794046] x86/mm: Checking user space page tables
[    2.806843] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.806845] Run /init as init process
[    2.915652] ACPI: watchdog: Skipping WDAT on this system because it uses RTC SRAM
[    2.915723] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20190816/utaddress-204)
[    2.915732] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.915735] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190816/utaddress-204)
[    2.915741] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.915742] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190816/utaddress-204)
[    2.915749] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x000000000000053A-0x000000000000053A (\_SB.PCI0.LPCB.EC0.GPIO) (20190816/utaddress-204)
[    2.915754] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.915756] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190816/utaddress-204)
[    2.915761] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.915762] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    2.916499] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    2.916501] ACPI: watchdog: Skipping WDAT on this system because it uses RTC SRAM
[    2.919728] ahci 0000:00:1f.2: version 3.0
[    2.928774] alx 0000:03:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [7c:05:07:ff:2b:cd]
[    2.929941] cryptd: max_cpu_qlen set to 1000
[    2.930071] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[    2.930075] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[    2.941576] scsi host0: ahci
[    2.941779] scsi host1: ahci
[    2.941964] scsi host2: ahci
[    2.942165] scsi host3: ahci
[    2.944192] scsi host4: ahci
[    2.946935] scsi host5: ahci
[    2.947012] ata1: SATA max UDMA/133 abar m2048@0xc0617000 port 0xc0617100 irq 28
[    2.947014] ata2: DUMMY
[    2.947017] ata3: SATA max UDMA/133 abar m2048@0xc0617000 port 0xc0617200 irq 28
[    2.947017] ata4: DUMMY
[    2.947018] ata5: DUMMY
[    2.947019] ata6: DUMMY
[    2.957194] AVX version of gcm_enc/dec engaged.
[    2.957195] AES CTR mode by8 optimization enabled
[    2.961569] alx 0000:03:00.0 enp3s0: renamed from eth0
[    3.020129] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    3.040158] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    3.040175] usb 3-3: new full-speed USB device number 2 using xhci_hcd
[    3.042050] checking generic (b0000000 57f000) vs hw (b0000000 10000000)
[    3.042052] fb0: switching to inteldrmfb from EFI VGA
[    3.042137] i915 0000:00:02.0: vgaarb: deactivate vga console
[    3.042904] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.042904] [drm] Driver supports precise vblank timestamp query.
[    3.043872] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    3.069920] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0
[    3.071070] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.071086] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    3.071457] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[    3.083240] fbcon: i915drmfb (fb0) is primary device
[    3.083241] fbcon: Deferring console take-over
[    3.083244] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[    3.184700] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    3.184703] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.185074] hub 1-1:1.0: USB hub found
[    3.185277] hub 1-1:1.0: 6 ports detected
[    3.189974] usb 3-3: New USB device found, idVendor=09da, idProduct=9090, bcdDevice= 1.03
[    3.189976] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.189978] usb 3-3: Product: USB Device
[    3.189979] usb 3-3: Manufacturer: A4TECH
[    3.194572] hidraw: raw HID events driver (C) Jiri Kosina
[    3.196490] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    3.196492] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.196767] hub 2-1:1.0: USB hub found
[    3.196881] hub 2-1:1.0: 6 ports detected
[    3.199197] usbcore: registered new interface driver usbhid
[    3.199198] usbhid: USB HID core driver
[    3.202125] input: A4TECH USB Device Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:09DA:9090.0001/input/input6
[    3.260297] input: A4TECH USB Device System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:09DA:9090.0001/input/input7
[    3.260471] input: A4TECH USB Device Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:09DA:9090.0001/input/input8
[    3.260625] input: A4TECH USB Device as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:09DA:9090.0001/input/input9
[    3.260998] hid-generic 0003:09DA:9090.0001: input,hiddev0,hidraw0: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:14.0-3/input0
[    3.261155] input: A4TECH USB Device as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/0003:09DA:9090.0002/input/input10
[    3.261349] hid-generic 0003:09DA:9090.0002: input,hidraw1: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:14.0-3/input1
[    3.262958] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.262984] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.263705] ata1.00: ATA-10: ADATA SU800, R0126A, max UDMA/133
[    3.263708] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    3.264126] ata1.00: configured for UDMA/133
[    3.274560] scsi 0:0:0:0: Direct-Access     ATA      ADATA SU800      6A   PQ: 0 ANSI: 5
[    3.274981] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.275330] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[    3.275361] sd 0:0:0:0: [sda] Write Protect is off
[    3.275364] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.275414] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.311998] ata3.00: ATA-9: ST1000LM014-1EJ164, LVD1, max UDMA/133
[    3.312000] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA
[    3.314297]  sda: sda1 sda2 sda3
[    3.315249] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.316095] usb 3-4: new high-speed USB device number 3 using xhci_hcd
[    3.356457] ata3.00: configured for UDMA/133
[    3.356938] scsi 2:0:0:0: Direct-Access     ATA      ST1000LM014-1EJ1 LVD1 PQ: 0 ANSI: 5
[    3.357350] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    3.357611] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    3.357613] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[    3.357660] sd 2:0:0:0: [sdb] Write Protect is off
[    3.357662] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.357716] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.376872]  sdb: sdb1 sdb2

Dodano po pewnym czasie:

Dodano po pewnym czasie:
Ok sprawa wygląda tak. Zainstalowałem w virtualbox'ie kilka systemów. Opensuse leap, Debiana, ubuntu i win 10.

Wychodzi na to że mam zepsuta kamerkę w laptopie bo w żadnym z systemów nie pokazał się obraz w cheese. Windows 10 nie wyświetlił urządzenia na liście podobnie w sumie jest w linuxach urządzenia nie ma w żadnej kategorii. Podłączyłem kamerkę USB takie badziewne prestigio i obraz bez problemu się pokazał nagrałem film zrobiłem zdjęcie itd.

Camera was not initialized

Podejrzewam że laptop mógł kiedyś uderzyć będąc w torbie bo nie świeci też dioda power która jest niedaleko kamerki jak się go zamknie. Uszkodzeń na obudowie nie ma więc obstawiam że był on w torbie gdy to się stało ale to tylko moja hipoteza.

Dzięki za męki pozdrawiam można zamknąć temat
Odpowiedz


Skocz do:




Użytkownicy przeglądający ten wątek: 1 gości