Ocena wątku:
  • 0 głosów - średnia: 0
  • 1
  • 2
  • 3
  • 4
  • 5
Rozwiązane Ustawienie zworek na kontrolerze PCI
#1
0
Dzień dobry
Chciałbym ustawić na poniższem kontrolerze zworki tak, aby aktywne były porty opisane jako CON4 i CON5. Wygląda to tak:
[Obrazek: 4ULcDBx.jpg]
Wydaje mi się, że sposób ustawienia jest opisane w tabeli, ale niestety sposób opisu nie jest dla mnie jasny. Domyślnie zworki były ustawione tak, jak na powyższym zdjęciu. Czy ktoś może podpowiedzieć jakie porty są obecnie aktywne i jak ustawić zworki by aktywować porty CON4 i CON 3?
Zdaję sobie sprawę że problem można rozwiązać drogą prób i błędów, ale niestety mam bardzo niekorzystne umiejscowienie komputera i  jest to stosunkowo problematycznie aby wyciągać go kilka razy i podłączać z powrotem.
Za wszelką pomoc będe wdzięczny.
Poniżej zbliżenie na tabelę:
[Obrazek: XVgdwuW.jpg]
#2
0
Obecnie są chyba aktywne CON1 i CON2.
Przestaw wszystkie osiem zworek w dół (zwarcie 2-3) aby aktywować CON3 i CON4.
#3
0
Dziwna sprawa, ale chyba to nie działa w sposób w jaki chciałbym, aby działało albo jest inny problem. Ustawiłem zworki w sugerowany sposób, ale niestety dysk podłączony pod port kontrolera nie jest wykrywany.
Polecenie
Kod:
lspci | grep SATA

zwraca cztery linie:
Cytat:02:00.1 SATA controller: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset SATA Controller (rev 01)
06:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 01)
08:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 02)
0c:00.2 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 51)
i wydaje się, że te dwa kontrolery ASMedia to właśnie ten kontroler, ale przy podłączeniu tam dysku nie widać go.
Czy to jest mozliwe aby (w razie gdyby!) ten port PCI-E nie działał (współdzielił linię z innym portem i został dezaktywowany) to polecenie lspci meldowało by, że coś takiego jest włozone do portu?
#4
0
Też mi się wydaje, że karta PCI-E ma na pokładzie dwa kontrolery SATA:
Kod:
06:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 01)
08:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 02)
Zdjęcia obu stron karty by się przydały i pełny wynik dmesg.
Być może nie ma jeszcze obsługi dla tej karty w jądrach Linuksa.
Zajrzyj na stronę producenta, może udostępnia sterowniki.
#5
0
Co jest bardzo ciekawe, w opiniach pod tym produktem można przeczytać, że jeden klient podłączył go na ubuntu i nie potrzeba żadnych sterowników.
Jedyne co znalazłem to instrukcja, ale nie ma tam nic cennego. Podobno Linuksa nie wspiera.
https://media.eetgroup.com/documents/Doc_9219508.pdf
Mam na innym dysku POP  os, który bazuje na ubuntu, ale niestety to nie rozwiązało problemu. Poniżej wynik dmesg.
Niestety wynik jest za długi. Poniżej wklejam jego część - drugą prawdopodobnie będę mógł dodać w następnym poście.


Kod:
[    0.000000] Linux version 5.11.0-7614-generic (buildd@lgw01-amd64-045) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #15~1622578982~20.04~383c0a9-Ubuntu SMP Wed Jun 2 00:57:14 UTC 2 (Ubuntu 5.11.0-7614.15~1622578982~20.04~383c0a9-generic 5.11.13)
[    0.000000] Command line: initrd=\EFI\Pop_OS-41918a57-380d-4224-9b2a-37a9225dfeb1\initrd.img root=UUID=41918a57-380d-4224-9b2a-37a9225dfeb1 ro quiet loglevel=0 systemd.show_status=false splash
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai 
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009d01fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000009d02000-0x0000000009ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a20afff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000000a20b000-0x000000000affffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000b020000-0x00000000db18ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000db190000-0x00000000dc684fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dc685000-0x00000000dc806fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dc807000-0x00000000dcc1afff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000dcc1b000-0x00000000dd76dfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dd76e000-0x00000000deffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000051f37ffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0xd7032018-0xd703a057] usable ==> usable
[    0.000000] e820: update [mem 0xd7032018-0xd703a057] usable ==> usable
[    0.000000] e820: update [mem 0xd7012018-0xd7031857] usable ==> usable
[    0.000000] e820: update [mem 0xd7012018-0xd7031857] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000009d01fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000009d02000-0x0000000009ffffff] reserved
[    0.000000] reserve setup_data: [mem 0x000000000a000000-0x000000000a1fffff] usable
[    0.000000] reserve setup_data: [mem 0x000000000a200000-0x000000000a20afff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x000000000a20b000-0x000000000affffff] usable
[    0.000000] reserve setup_data: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[    0.000000] reserve setup_data: [mem 0x000000000b020000-0x00000000d7012017] usable
[    0.000000] reserve setup_data: [mem 0x00000000d7012018-0x00000000d7031857] usable
[    0.000000] reserve setup_data: [mem 0x00000000d7031858-0x00000000d7032017] usable
[    0.000000] reserve setup_data: [mem 0x00000000d7032018-0x00000000d703a057] usable
[    0.000000] reserve setup_data: [mem 0x00000000d703a058-0x00000000db18ffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000db190000-0x00000000dc684fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000dc685000-0x00000000dc806fff] usable
[    0.000000] reserve setup_data: [mem 0x00000000dc807000-0x00000000dcc1afff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000dcc1b000-0x00000000dd76dfff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000dd76e000-0x00000000deffffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000df000000-0x00000000dfffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fd000000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000051f37ffff] usable
[    0.000000] efi: EFI v2.70 by American Megatrends
[    0.000000] efi: ACPI 2.0=0xdcb96000 ACPI=0xdcb96000 SMBIOS=0xdd5a4000 SMBIOS 3.0=0xdd5a3000 MEMATTR=0xd710a018 ESRT=0xd7157b98 RNG=0xdd5bdb98
[    0.000000] efi: seeding entropy pool
[    0.000000] random: fast init done
[    0.000000] secureboot: Secure boot disabled
[    0.000000] SMBIOS 3.2.1 present.
[    0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./B450 Gaming K4, BIOS P4.10 03/05/2020
[    0.000000] tsc: Fast TSC calibration failed
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] last_pfn = 0x51f380 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF write-through
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFE0000000 write-back
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000520000000 aka 20992M
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT 
[    0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[    0.000000] last_pfn = 0xdf000 max_arch_pfn = 0x400000000
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000DCB96000 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000DCB960A0 0000C4 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000DCB9CBE8 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000DCB96200 0069E7 (v02 ALASKA A M I    01072009 INTL 20120913)
[    0.000000] ACPI: FACS 0x00000000DCC02E00 000040
[    0.000000] ACPI: APIC 0x00000000DCB9CD00 00015E (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000DCB9CE60 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FIDT 0x00000000DCB9CEA8 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000DCB9CF48 0000C8 (v02 ALASKA CPUSSDT  01072009 AMI  01072009)
[    0.000000] ACPI: SSDT 0x00000000DCB9D010 008C98 (v02 AMD    AMD ALIB 00000002 MSFT 04000000)
[    0.000000] ACPI: SSDT 0x00000000DCBA5CA8 00315B (v01 AMD    AMD AOD  00000001 INTL 20120913)
[    0.000000] ACPI: MCFG 0x00000000DCBA8E08 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
[    0.000000] ACPI: AAFT 0x00000000DCBA8E48 000463 (v01 ALASKA OEMAAFT  01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000DCBA92B0 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
[    0.000000] ACPI: SSDT 0x00000000DCBA92E8 000024 (v01 AMDFCH FCHZP    00001000 INTL 20120913)
[    0.000000] ACPI: UEFI 0x00000000DCBA9310 000042 (v01 ALASKA A M I    00000002      01000013)
[    0.000000] ACPI: BGRT 0x00000000DCBA9358 000038 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000DCBA9390 001A58 (v01 AMD    AMD CPU  00000001 AMD  00000001)
[    0.000000] ACPI: CRAT 0x00000000DCBAADE8 000BF8 (v01 AMD    AMD CRAT 00000001 AMD  00000001)
[    0.000000] ACPI: CDIT 0x00000000DCBAB9E0 000029 (v01 AMD    AMD CDIT 00000001 AMD  00000001)
[    0.000000] ACPI: SSDT 0x00000000DCBABA10 001D34 (v01 AMD    AmdTable 00000001 INTL 20120913)
[    0.000000] ACPI: SSDT 0x00000000DCBAD748 0000BF (v01 AMD    AMD PT   00001000 INTL 20120913)
[    0.000000] ACPI: WSMT 0x00000000DCBAD808 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000DCBAD830 0010AF (v01 AMD    AmdTable 00000001 INTL 20120913)
[    0.000000] ACPI: Reserving FACP table memory at [mem 0xdcb9cbe8-0xdcb9ccfb]
[    0.000000] ACPI: Reserving DSDT table memory at [mem 0xdcb96200-0xdcb9cbe6]
[    0.000000] ACPI: Reserving FACS table memory at [mem 0xdcc02e00-0xdcc02e3f]
[    0.000000] ACPI: Reserving APIC table memory at [mem 0xdcb9cd00-0xdcb9ce5d]
[    0.000000] ACPI: Reserving FPDT table memory at [mem 0xdcb9ce60-0xdcb9cea3]
[    0.000000] ACPI: Reserving FIDT table memory at [mem 0xdcb9cea8-0xdcb9cf43]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xdcb9cf48-0xdcb9d00f]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xdcb9d010-0xdcba5ca7]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xdcba5ca8-0xdcba8e02]
[    0.000000] ACPI: Reserving MCFG table memory at [mem 0xdcba8e08-0xdcba8e43]
[    0.000000] ACPI: Reserving AAFT table memory at [mem 0xdcba8e48-0xdcba92aa]
[    0.000000] ACPI: Reserving HPET table memory at [mem 0xdcba92b0-0xdcba92e7]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xdcba92e8-0xdcba930b]
[    0.000000] ACPI: Reserving UEFI table memory at [mem 0xdcba9310-0xdcba9351]
[    0.000000] ACPI: Reserving BGRT table memory at [mem 0xdcba9358-0xdcba938f]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xdcba9390-0xdcbaade7]
[    0.000000] ACPI: Reserving CRAT table memory at [mem 0xdcbaade8-0xdcbab9df]
[    0.000000] ACPI: Reserving CDIT table memory at [mem 0xdcbab9e0-0xdcbaba08]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xdcbaba10-0xdcbad743]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xdcbad748-0xdcbad806]
[    0.000000] ACPI: Reserving WSMT table memory at [mem 0xdcbad808-0xdcbad82f]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xdcbad830-0xdcbae8de]
[    0.000000] esrt: Reserving ESRT space from 0x00000000d7157b98 to 0x00000000d7157bd0.
[    0.000000] e820: update [mem 0xd7157000-0xd7157fff] usable ==> reserved
[    0.000000] check: Scanning 1 areas for low memory corruption
[    0.000000] Using GB pages for direct mapping
[    0.000000] secureboot: Secure boot disabled
[    0.000000] RAMDISK: [mem 0x7a1d8000-0x7fffffff]
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000051f37ffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x51f356000-0x51f37ffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000051f37ffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000009d01fff]
[    0.000000]   node   0: [mem 0x000000000a000000-0x000000000a1fffff]
[    0.000000]   node   0: [mem 0x000000000a20b000-0x000000000affffff]
[    0.000000]   node   0: [mem 0x000000000b020000-0x00000000db18ffff]
[    0.000000]   node   0: [mem 0x00000000dc685000-0x00000000dc806fff]
[    0.000000]   node   0: [mem 0x00000000dd76e000-0x00000000deffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000051f37ffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000051f37ffff]
[    0.000000] On node 0 totalpages: 5225370
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 28 pages reserved
[    0.000000]   DMA zone: 3999 pages, LIFO batch:0
[    0.000000]   DMA zone: 28769 pages in unavailable ranges
[    0.000000]   DMA32 zone: 14050 pages used for memmap
[    0.000000]   DMA32 zone: 899195 pages, LIFO batch:63
[    0.000000]   DMA32 zone: 14213 pages in unavailable ranges
[    0.000000]   Normal zone: 67534 pages used for memmap
[    0.000000]   Normal zone: 4322176 pages, LIFO batch:63
[    0.000000]   Normal zone: 3200 pages in unavailable ranges
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 13, version 33, address 0xfec00000, GSI 0-23
[    0.000000] IOAPIC[1]: apic_id 14, version 33, address 0xfec01000, GSI 24-55
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
[    0.000000] e820: update [mem 0xd7c5d000-0xd7c9dfff] usable ==> reserved
[    0.000000] smpboot: Allowing 32 CPUs, 20 hotplug CPUs
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x09d02000-0x09ffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20afff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xd7012000-0xd7012fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xd7031000-0xd7031fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xd7032000-0xd7032fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xd703a000-0xd703afff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xd7157000-0xd7157fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xd7c5d000-0xd7c9dfff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xdb190000-0xdc684fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xdc807000-0xdcc1afff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xdcc1b000-0xdd76dfff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xdf000000-0xdfffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfcffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd000000-0xffffffff]
[    0.000000] [mem 0xe0000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1
[    0.000000] percpu: Embedded 56 pages/cpu s192512 r8192 d28672 u262144
[    0.000000] pcpu-alloc: s192512 r8192 d28672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[    0.000000] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 5143694
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: initrd=\EFI\Pop_OS-41918a57-380d-4224-9b2a-37a9225dfeb1\initrd.img root=UUID=41918a57-380d-4224-9b2a-37a9225dfeb1 ro quiet loglevel=0 systemd.show_status=false splash
[    0.000000] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[    0.000000] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.000000] Memory: 20223612K/20901480K available (14345K kernel code, 3477K rwdata, 9172K rodata, 2680K init, 5988K bss, 677608K reserved, 0K cma-reserved)
[    0.000000] random: get_random_u64 called from __kmem_cache_create+0x31/0x430 with crng_init=1
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
[    0.000000] ftrace: allocating 48636 entries in 190 pages
[    0.000000] ftrace: allocated 190 pages with 6 groups
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=32.
[    0.000000] Rude variant of Tasks RCU enabled.
[    0.000000] Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
[    0.000000] NR_IRQS: 524544, nr_irqs: 1224, preallocated irqs: 16
[    0.000000] random: crng done (trusting CPU's manufacturer)
[    0.000000] Console: colour dummy device 80x25
[    0.000000] printk: console [tty0] enabled
[    0.000000] ACPI: Core revision 20201113
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] Switched APIC routing to physical flat.
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.032000] tsc: Unable to calibrate against PIT
[    0.032000] tsc: using HPET reference calibration
[    0.032000] tsc: Detected 3193.499 MHz processor
[    0.000002] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2e084cee6a4, max_idle_ns: 440795343113 ns
[    0.000006] Calibrating delay loop (skipped), value calculated using timer frequency.. 6386.99 BogoMIPS (lpj=12773996)
[    0.000008] pid_max: default: 32768 minimum: 301
[    0.005017] LSM: Security Framework initializing
[    0.005026] Yama: becoming mindful.
[    0.005046] AppArmor: AppArmor initialized
[    0.005121] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.005171] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.005429] LVT offset 1 assigned for vector 0xf9
[    0.005494] LVT offset 2 assigned for vector 0xf4
[    0.005509] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[    0.005510] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
[    0.005513] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.005515] Spectre V2 : Mitigation: Full AMD retpoline
[    0.005515] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.005517] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.005518] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.005727] Freeing SMP alternatives memory: 40K
[    0.117844] smpboot: CPU0: AMD Ryzen 5 1600 Six-Core Processor (family: 0x17, model: 0x8, stepping: 0x2)
[    0.117971] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
[    0.117975] ... version:                0
[    0.117976] ... bit width:              48
[    0.117977] ... generic registers:      6
[    0.117977] ... value mask:             0000ffffffffffff
[    0.117978] ... max period:             00007fffffffffff
[    0.117979] ... fixed-purpose events:   0
[    0.117979] ... event mask:             000000000000003f
[    0.118030] rcu: Hierarchical SRCU implementation.
[    0.118350] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.118557] smp: Bringing up secondary CPUs ...
[    0.118633] x86: Booting SMP configuration:
[    0.118634] .... node  #0, CPUs:        #1  #2  #3  #4  #5  #6  #7  #8  #9 #10 #11
[    0.140038] smp: Brought up 1 node, 12 CPUs
[    0.140038] smpboot: Max logical packages: 3
[    0.140038] smpboot: Total of 12 processors activated (76643.97 BogoMIPS)
[    0.141967] devtmpfs: initialized
[    0.141967] x86/mm: Memory block size: 128MB
[    0.144878] PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20afff] (45056 bytes)
[    0.144878] PM: Registering ACPI NVS region [mem 0xdc807000-0xdcc1afff] (4276224 bytes)
[    0.144878] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.144878] futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
[    0.144878] pinctrl core: initialized pinctrl subsystem
[    0.144878] PM: RTC time: 08:48:48, date: 2021-07-03
[    0.144878] NET: Registered protocol family 16
[    0.144878] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
[    0.145099] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.145540] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.145553] audit: initializing netlink subsys (disabled)
[    0.145568] audit: type=2000 audit(1625302128.176:1): state=initialized audit_enabled=0 res=1
[    0.145568] thermal_sys: Registered thermal governor 'fair_share'
[    0.145568] thermal_sys: Registered thermal governor 'bang_bang'
[    0.145568] thermal_sys: Registered thermal governor 'step_wise'
[    0.145568] thermal_sys: Registered thermal governor 'user_space'
[    0.145568] thermal_sys: Registered thermal governor 'power_allocator'
[    0.145568] EISA bus registered
[    0.145568] cpuidle: using governor ladder
[    0.145568] cpuidle: using governor menu
[    0.145568] ACPI: bus type PCI registered
[    0.145568] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.145568] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.145568] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.145568] PCI: Using configuration type 1 for base access
[    0.148278] Kprobes globally optimized
[    0.148282] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.148282] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.148282] ACPI: Added _OSI(Module Device)
[    0.148282] ACPI: Added _OSI(Processor Device)
[    0.148282] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.148282] ACPI: Added _OSI(Processor Aggregator Device)
[    0.148282] ACPI: Added _OSI(Linux-Dell-Video)
[    0.148282] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.148282] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.161796] ACPI: 9 ACPI AML tables successfully acquired and loaded
[    0.163063] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.166460] ACPI: Interpreter enabled
[    0.166476] ACPI: (supports S0 S3 S4 S5)
[    0.166477] ACPI: Using IOAPIC for interrupt routing
[    0.166778] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.167156] ACPI: Enabled 2 GPEs in block 00 to 1F
[    0.176474] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.176480] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.176647] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
[    0.176807] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.176817] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.177145] PCI host bridge to bus 0000:00
[    0.177147] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.177148] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.177150] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.177151] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.177152] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.177153] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.177155] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
[    0.177156] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
[    0.177157] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.177166] pci 0000:00:00.0: [1022:1450] type 00 class 0x060000
[    0.177266] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
[    0.177341] pci 0000:00:01.1: [1022:1453] type 01 class 0x060400
[    0.177377] pci 0000:00:01.1: enabling Extended Tags
[    0.177703] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[    0.177824] pci 0000:00:01.3: [1022:1453] type 01 class 0x060400
[    0.177853] pci 0000:00:01.3: enabling Extended Tags
[    0.177920] pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
[    0.178045] pci 0000:00:02.0: [1022:1452] type 00 class 0x060000
[    0.178127] pci 0000:00:03.0: [1022:1452] type 00 class 0x060000
[    0.178196] pci 0000:00:03.1: [1022:1453] type 01 class 0x060400
[    0.178295] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[    0.178422] pci 0000:00:04.0: [1022:1452] type 00 class 0x060000
[    0.178511] pci 0000:00:07.0: [1022:1452] type 00 class 0x060000
[    0.178577] pci 0000:00:07.1: [1022:1454] type 01 class 0x060400
[    0.178669] pci 0000:00:07.1: enabling Extended Tags
[    0.178732] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
[    0.178855] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
[    0.178925] pci 0000:00:08.1: [1022:1454] type 01 class 0x060400
[    0.178953] pci 0000:00:08.1: enabling Extended Tags
[    0.179017] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[    0.179172] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[    0.179395] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[    0.179620] pci 0000:00:18.0: [1022:1460] type 00 class 0x060000
[    0.179676] pci 0000:00:18.1: [1022:1461] type 00 class 0x060000
[    0.179730] pci 0000:00:18.2: [1022:1462] type 00 class 0x060000
[    0.179784] pci 0000:00:18.3: [1022:1463] type 00 class 0x060000
[    0.179843] pci 0000:00:18.4: [1022:1464] type 00 class 0x060000
[    0.179898] pci 0000:00:18.5: [1022:1465] type 00 class 0x060000
[    0.179952] pci 0000:00:18.6: [1022:1466] type 00 class 0x060000
[    0.180009] pci 0000:00:18.7: [1022:1467] type 00 class 0x060000
[    0.180150] pci 0000:01:00.0: [10ec:5763] type 00 class 0x010802
[    0.180168] pci 0000:01:00.0: reg 0x10: [mem 0xf7a00000-0xf7a03fff 64bit]
[    0.180195] pci 0000:01:00.0: reg 0x24: [mem 0xf7a04000-0xf7a05fff]
[    0.180339] pci 0000:00:01.1: PCI bridge to [bus 01]
[    0.180344] pci 0000:00:01.1:   bridge window [mem 0xf7a00000-0xf7afffff]
[    0.180709] pci 0000:02:00.0: [1022:43d5] type 00 class 0x0c0330
[    0.180725] pci 0000:02:00.0: reg 0x10: [mem 0xf75a0000-0xf75a7fff 64bit]
[    0.180760] pci 0000:02:00.0: enabling Extended Tags
[    0.180810] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.180899] pci 0000:02:00.1: [1022:43c8] type 00 class 0x010601
[    0.180940] pci 0000:02:00.1: reg 0x24: [mem 0xf7580000-0xf759ffff]
[    0.180947] pci 0000:02:00.1: reg 0x30: [mem 0xf7500000-0xf757ffff pref]
[    0.180953] pci 0000:02:00.1: enabling Extended Tags
[    0.180989] pci 0000:02:00.1: PME# supported from D3hot D3cold
[    0.181056] pci 0000:02:00.2: [1022:43c6] type 01 class 0x060400
[    0.181094] pci 0000:02:00.2: enabling Extended Tags
[    0.181135] pci 0000:02:00.2: PME# supported from D3hot D3cold
[    0.181216] pci 0000:00:01.3: PCI bridge to [bus 02-09]
[    0.181220] pci 0000:00:01.3:   bridge window [io  0xc000-0xefff]
[    0.181222] pci 0000:00:01.3:   bridge window [mem 0xf7200000-0xf75fffff]
[    0.181314] pci 0000:03:00.0: [1022:43c7] type 01 class 0x060400
[    0.181356] pci 0000:03:00.0: enabling Extended Tags
[    0.181408] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.181496] pci 0000:03:01.0: [1022:43c7] type 01 class 0x060400
[    0.181538] pci 0000:03:01.0: enabling Extended Tags
[    0.181589] pci 0000:03:01.0: PME# supported from D3hot D3cold
[    0.181678] pci 0000:03:04.0: [1022:43c7] type 01 class 0x060400
[    0.181719] pci 0000:03:04.0: enabling Extended Tags
[    0.181770] pci 0000:03:04.0: PME# supported from D3hot D3cold
[    0.181858] pci 0000:03:05.0: [1022:43c7] type 01 class 0x060400
[    0.181899] pci 0000:03:05.0: enabling Extended Tags
[    0.181950] pci 0000:03:05.0: PME# supported from D3hot D3cold
[    0.182040] pci 0000:03:06.0: [1022:43c7] type 01 class 0x060400
[    0.182081] pci 0000:03:06.0: enabling Extended Tags
[    0.182133] pci 0000:03:06.0: PME# supported from D3hot D3cold
[    0.182222] pci 0000:03:07.0: [1022:43c7] type 01 class 0x060400
[    0.182263] pci 0000:03:07.0: enabling Extended Tags
[    0.182315] pci 0000:03:07.0: PME# supported from D3hot D3cold
[    0.182412] pci 0000:02:00.2: PCI bridge to [bus 03-09]
[    0.182416] pci 0000:02:00.2:   bridge window [io  0xc000-0xefff]
[    0.182419] pci 0000:02:00.2:   bridge window [mem 0xf7200000-0xf74fffff]
[    0.182452] pci 0000:03:00.0: PCI bridge to [bus 04]
[    0.182504] pci 0000:03:01.0: PCI bridge to [bus 05]
[    0.182549] pci 0000:03:04.0: PCI bridge to [bus 06]
[    0.182609] pci 0000:07:00.0: [1b21:0612] type 00 class 0x010601
[    0.182631] pci 0000:07:00.0: reg 0x10: [io  0xe050-0xe057]
[    0.182643] pci 0000:07:00.0: reg 0x14: [io  0xe040-0xe043]
[    0.182655] pci 0000:07:00.0: reg 0x18: [io  0xe030-0xe037]
[    0.182667] pci 0000:07:00.0: reg 0x1c: [io  0xe020-0xe023]
[    0.182679] pci 0000:07:00.0: reg 0x20: [io  0xe000-0xe01f]
[    0.182691] pci 0000:07:00.0: reg 0x24: [mem 0xf7410000-0xf74101ff]
[    0.182703] pci 0000:07:00.0: reg 0x30: [mem 0xf7400000-0xf740ffff pref]
[    0.182853] pci 0000:03:05.0: PCI bridge to [bus 07]
[    0.182858] pci 0000:03:05.0:   bridge window [io  0xe000-0xefff]
[    0.182861] pci 0000:03:05.0:   bridge window [mem 0xf7400000-0xf74fffff]
[    0.182916] pci 0000:08:00.0: [1b21:0612] type 00 class 0x010601
[    0.182938] pci 0000:08:00.0: reg 0x10: [io  0xd050-0xd057]
[    0.182950] pci 0000:08:00.0: reg 0x14: [io  0xd040-0xd043]
[    0.182961] pci 0000:08:00.0: reg 0x18: [io  0xd030-0xd037]
[    0.182973] pci 0000:08:00.0: reg 0x1c: [io  0xd020-0xd023]
[    0.182985] pci 0000:08:00.0: reg 0x20: [io  0xd000-0xd01f]
[    0.182997] pci 0000:08:00.0: reg 0x24: [mem 0xf7300000-0xf73001ff]
[    0.183158] pci 0000:03:06.0: PCI bridge to [bus 08]
[    0.183163] pci 0000:03:06.0:   bridge window [io  0xd000-0xdfff]
[    0.183166] pci 0000:03:06.0:   bridge window [mem 0xf7300000-0xf73fffff]
[    0.183232] pci 0000:09:00.0: [10ec:8168] type 00 class 0x020000
[    0.183258] pci 0000:09:00.0: reg 0x10: [io  0xc000-0xc0ff]
[    0.183292] pci 0000:09:00.0: reg 0x18: [mem 0xf7204000-0xf7204fff 64bit]
[    0.183314] pci 0000:09:00.0: reg 0x20: [mem 0xf7200000-0xf7203fff 64bit]
[    0.183455] pci 0000:09:00.0: supports D1 D2
[    0.183456] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.183619] pci 0000:03:07.0: PCI bridge to [bus 09]
[    0.183623] pci 0000:03:07.0:   bridge window [io  0xc000-0xcfff]
[    0.183626] pci 0000:03:07.0:   bridge window [mem 0xf7200000-0xf72fffff]
[    0.183734] pci 0000:0a:00.0: [10de:1c81] type 00 class 0x030000
[    0.183747] pci 0000:0a:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[    0.183758] pci 0000:0a:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.183769] pci 0000:0a:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.183776] pci 0000:0a:00.0: reg 0x24: [io  0xf000-0xf07f]
[    0.183783] pci 0000:0a:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[    0.183803] pci 0000:0a:00.0: BAR 3: assigned to efifb
[    0.183904] pci 0000:0a:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:03.1 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
[    0.183942] pci 0000:0a:00.1: [10de:0fb9] type 00 class 0x040300
[    0.183955] pci 0000:0a:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
[    0.184099] pci 0000:00:03.1: PCI bridge to [bus 0a]
[    0.184102] pci 0000:00:03.1:   bridge window [io  0xf000-0xffff]
[    0.184104] pci 0000:00:03.1:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.184107] pci 0000:00:03.1:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.184171] pci 0000:0b:00.0: [1022:145a] type 00 class 0x130000
[    0.184193] pci 0000:0b:00.0: enabling Extended Tags
[    0.184252] pci 0000:0b:00.2: [1022:1456] type 00 class 0x108000
[    0.184263] pci 0000:0b:00.2: reg 0x18: [mem 0xf7700000-0xf77fffff]
[    0.184270] pci 0000:0b:00.2: reg 0x24: [mem 0xf7800000-0xf7801fff]
[    0.184276] pci 0000:0b:00.2: enabling Extended Tags
[    0.184346] pci 0000:0b:00.3: [1022:145f] type 00 class 0x0c0330
[    0.184355] pci 0000:0b:00.3: reg 0x10: [mem 0xf7600000-0xf76fffff 64bit]
[    0.184374] pci 0000:0b:00.3: enabling Extended Tags
[    0.184400] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold
[    0.184451] pci 0000:00:07.1: PCI bridge to [bus 0b]
[    0.184455] pci 0000:00:07.1:   bridge window [mem 0xf7600000-0xf78fffff]
[    0.184731] pci 0000:0c:00.0: [1022:1455] type 00 class 0x130000
[    0.184755] pci 0000:0c:00.0: enabling Extended Tags
[    0.184817] pci 0000:0c:00.2: [1022:7901] type 00 class 0x010601
[    0.184842] pci 0000:0c:00.2: reg 0x24: [mem 0xf7908000-0xf7908fff]
[    0.184849] pci 0000:0c:00.2: enabling Extended Tags
[    0.184875] pci 0000:0c:00.2: PME# supported from D3hot D3cold
[    0.184927] pci 0000:0c:00.3: [1022:1457] type 00 class 0x040300
[    0.184934] pci 0000:0c:00.3: reg 0x10: [mem 0xf7900000-0xf7907fff]
[    0.184952] pci 0000:0c:00.3: enabling Extended Tags
[    0.184977] pci 0000:0c:00.3: PME# supported from D0 D3hot D3cold
[    0.185029] pci 0000:00:08.1: PCI bridge to [bus 0c]
[    0.185033] pci 0000:00:08.1:   bridge window [mem 0xf7900000-0xf79fffff]
[    0.185414] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[    0.185475] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[    0.185528] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[    0.185593] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[    0.185652] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[    0.185701] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[    0.185749] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[    0.185798] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[    0.186311] iommu: Default domain type: Translated


Tutaj zdjęcia karty:
[Obrazek: I2Kc9fC.jpg][Obrazek: lTDBZ2b.jpg]

Dodano po pewnym czasie:
Niestety nie mogę dodać drugiej części. Z automatu chce się dopisać do wcześniejszego postu, co koliduje z zadanym limitem długości posta:
MyBB has experienced an internal SQL error and cannot continue.
#6
0
Próbowałeś najpierw przestawić zworki a dopiero potem podpiąć dysk? przy okazji rozwiązuję problem za długiego posta
#7
0
Wynik dmesg możesz wrzucić np. na pastebin
https://forum.linuxmint.pl/showthread.ph...76#pid1076
Cytat:Jak ułatwić sobie życie?
Wklejanie wyników poleceń lub zawartości logów może być dość kłopotliwe. Aby ułatwić sobie tę
część pracy - warto zainstalować sobie program do automatycznego zamieszczania wszelki treści tekstowych na serwisie takim jak pastebin.com.
Kod: [Zaznacz]
Kod:
sudo apt-get install pastebinit

Zamieszczanie treści jest w tym momencie bardzo proste. Przykładowo spróbuj umieścić informacje o urządzeniach USB w serwisie pastebin.com.
Kod: [Zaznacz]
Kod:
lsusb|pastebinit

Wynikiem programu będzię link. Skopiuj i wklej go w przeglądarce internetowej. Teraz powinieneś rozumieć zasadę działania tej aplikacji.
Przykładowe inne użycie aplikacji:
Kod: [Zaznacz]
Kod:
dmesg|pastebinit
lspci|pastebinit
cat /var/log/Xorg.0.log|pastebinit
cat /var/log/daemon.log|pastebinit

Jak widzisz umieszczenie zawartości pliku textowego polega na wykonaniu polecenia:
Kod: [Zaznacz]
Kod:
cat /ścieżka/do/pliku|pastebinit
#8
0
Dziękuję. Kolejność była taka, że najpierw ustawiłem zworki zgodnie z sugestią kolegi dedito, a następnie włożyłem kartę do slotu PCI. Po tym podłączany był dysk, a na koniec uruchamiany komputer.
Dodam też, że kontroler jest już w tym (z polecenia dmesg)  komputerze od  trzech dni - uruchamiany był raz dziennie; dys nie pokazał się jeszcze ani raz.
Kod:
    0.186311] SCSI subsystem initialized
[    0.186311] libata version 3.00 loaded.
[    0.186311] pci 0000:0a:00.0: vgaarb: setting as boot VGA device
[    0.186311] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.186311] pci 0000:0a:00.0: vgaarb: bridge control possible
[    0.186311] vgaarb: loaded
[    0.186311] ACPI: bus type USB registered
[    0.186311] usbcore: registered new interface driver usbfs
[    0.186311] usbcore: registered new interface driver hub
[    0.186311] usbcore: registered new device driver usb
[    0.186311] pps_core: LinuxPPS API ver. 1 registered
[    0.186311] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[    0.186311] PTP clock support registered
[    0.186311] EDAC MC: Ver: 3.0.0
[    0.186311] Registered efivars operations
[    0.186311] NetLabel: Initializing
[    0.186311] NetLabel:  domain hash size = 128
[    0.186311] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.186311] NetLabel:  unlabeled traffic allowed by default
[    0.186311] PCI: Using ACPI for IRQ routing
[    0.190994] PCI: pci_cache_line_size set to 64 bytes
[    0.191060] Expanded resource Reserved due to conflict with PCI Bus 0000:00
[    0.191061] e820: reserve RAM buffer [mem 0x09d02000-0x0bffffff]
[    0.191063] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
[    0.191064] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
[    0.191065] e820: reserve RAM buffer [mem 0xd7012018-0xd7ffffff]
[    0.191066] e820: reserve RAM buffer [mem 0xd7032018-0xd7ffffff]
[    0.191067] e820: reserve RAM buffer [mem 0xd7157000-0xd7ffffff]
[    0.191068] e820: reserve RAM buffer [mem 0xd7c5d000-0xd7ffffff]
[    0.191068] e820: reserve RAM buffer [mem 0xdb190000-0xdbffffff]
[    0.191069] e820: reserve RAM buffer [mem 0xdc807000-0xdfffffff]
[    0.191070] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
[    0.191071] e820: reserve RAM buffer [mem 0x51f380000-0x51fffffff]
[    0.191074] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.191074] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.193057] clocksource: Switched to clocksource tsc-early
[    0.199130] VFS: Disk quotas dquot_6.6.0
[    0.199150] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.199247] AppArmor: AppArmor Filesystem Enabled
[    0.199273] pnp: PnP ACPI init
[    0.199413] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.199419] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.199450] system 00:01: [mem 0xfeb80000-0xfebfffff] has been reserved
[    0.199453] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.199529] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.199715] system 00:03: [io  0x0280-0x028f] has been reserved
[    0.199717] system 00:03: [io  0x0290-0x029f] has been reserved
[    0.199719] system 00:03: [io  0x02a0-0x02af] has been reserved
[    0.199720] system 00:03: [io  0x02b0-0x02bf] has been reserved
[    0.199723] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.199958] pnp 00:04: [dma 0 disabled]
[    0.199988] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.200236] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.200238] system 00:05: [io  0x040b] has been reserved
[    0.200240] system 00:05: [io  0x04d6] has been reserved
[    0.200241] system 00:05: [io  0x0c00-0x0c01] has been reserved
[    0.200242] system 00:05: [io  0x0c14] has been reserved
[    0.200243] system 00:05: [io  0x0c50-0x0c51] has been reserved
[    0.200244] system 00:05: [io  0x0c52] has been reserved
[    0.200245] system 00:05: [io  0x0c6c] has been reserved
[    0.200246] system 00:05: [io  0x0c6f] has been reserved
[    0.200247] system 00:05: [io  0x0cd0-0x0cd1] has been reserved
[    0.200248] system 00:05: [io  0x0cd2-0x0cd3] has been reserved
[    0.200249] system 00:05: [io  0x0cd4-0x0cd5] has been reserved
[    0.200250] system 00:05: [io  0x0cd6-0x0cd7] has been reserved
[    0.200251] system 00:05: [io  0x0cd8-0x0cdf] has been reserved
[    0.200254] system 00:05: [io  0x0800-0x089f] has been reserved
[    0.200256] system 00:05: [io  0x0b00-0x0b0f] has been reserved
[    0.200257] system 00:05: [io  0x0b20-0x0b3f] has been reserved
[    0.200258] system 00:05: [io  0x0900-0x090f] has been reserved
[    0.200259] system 00:05: [io  0x0910-0x091f] has been reserved
[    0.200260] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.200262] system 00:05: [mem 0xfec01000-0xfec01fff] could not be reserved
[    0.200263] system 00:05: [mem 0xfedc0000-0xfedc0fff] has been reserved
[    0.200264] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.200265] system 00:05: [mem 0xfed80000-0xfed8ffff] could not be reserved
[    0.200267] system 00:05: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.200268] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[    0.200271] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.200697] pnp: PnP ACPI: found 6 devices
[    0.206308] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.206358] NET: Registered protocol family 2
[    0.206573] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
[    0.206795] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.207091] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.207164] TCP: Hash tables configured (established 262144 bind 65536)
[    0.207301] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear)
[    0.207381] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.207462] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.207546] NET: Registered protocol family 1
[    0.207551] NET: Registered protocol family 44
[    0.207568] pci 0000:00:01.1: PCI bridge to [bus 01]
[    0.207573] pci 0000:00:01.1:   bridge window [mem 0xf7a00000-0xf7afffff]
[    0.207578] pci 0000:03:00.0: PCI bridge to [bus 04]
[    0.207587] pci 0000:03:01.0: PCI bridge to [bus 05]
[    0.207596] pci 0000:03:04.0: PCI bridge to [bus 06]
[    0.207606] pci 0000:03:05.0: PCI bridge to [bus 07]
[    0.207608] pci 0000:03:05.0:   bridge window [io  0xe000-0xefff]
[    0.207611] pci 0000:03:05.0:   bridge window [mem 0xf7400000-0xf74fffff]
[    0.207618] pci 0000:03:06.0: PCI bridge to [bus 08]
[    0.207620] pci 0000:03:06.0:   bridge window [io  0xd000-0xdfff]
[    0.207623] pci 0000:03:06.0:   bridge window [mem 0xf7300000-0xf73fffff]
[    0.207630] pci 0000:03:07.0: PCI bridge to [bus 09]
[    0.207631] pci 0000:03:07.0:   bridge window [io  0xc000-0xcfff]
[    0.207635] pci 0000:03:07.0:   bridge window [mem 0xf7200000-0xf72fffff]
[    0.207641] pci 0000:02:00.2: PCI bridge to [bus 03-09]
[    0.207643] pci 0000:02:00.2:   bridge window [io  0xc000-0xefff]
[    0.207647] pci 0000:02:00.2:   bridge window [mem 0xf7200000-0xf74fffff]
[    0.207653] pci 0000:00:01.3: PCI bridge to [bus 02-09]
[    0.207654] pci 0000:00:01.3:   bridge window [io  0xc000-0xefff]
[    0.207656] pci 0000:00:01.3:   bridge window [mem 0xf7200000-0xf75fffff]
[    0.207660] pci 0000:00:03.1: PCI bridge to [bus 0a]
[    0.207662] pci 0000:00:03.1:   bridge window [io  0xf000-0xffff]
[    0.207664] pci 0000:00:03.1:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.207666] pci 0000:00:03.1:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.207669] pci 0000:00:07.1: PCI bridge to [bus 0b]
[    0.207671] pci 0000:00:07.1:   bridge window [mem 0xf7600000-0xf78fffff]
[    0.207675] pci 0000:00:08.1: PCI bridge to [bus 0c]
[    0.207677] pci 0000:00:08.1:   bridge window [mem 0xf7900000-0xf79fffff]
[    0.207682] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.207683] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.207684] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.207685] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.207686] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.207688] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.207689] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window]
[    0.207690] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
[    0.207691] pci_bus 0000:01: resource 1 [mem 0xf7a00000-0xf7afffff]
[    0.207692] pci_bus 0000:02: resource 0 [io  0xc000-0xefff]
[    0.207693] pci_bus 0000:02: resource 1 [mem 0xf7200000-0xf75fffff]
[    0.207694] pci_bus 0000:03: resource 0 [io  0xc000-0xefff]
[    0.207695] pci_bus 0000:03: resource 1 [mem 0xf7200000-0xf74fffff]
[    0.207697] pci_bus 0000:07: resource 0 [io  0xe000-0xefff]
[    0.207698] pci_bus 0000:07: resource 1 [mem 0xf7400000-0xf74fffff]
[    0.207699] pci_bus 0000:08: resource 0 [io  0xd000-0xdfff]
[    0.207700] pci_bus 0000:08: resource 1 [mem 0xf7300000-0xf73fffff]
[    0.207701] pci_bus 0000:09: resource 0 [io  0xc000-0xcfff]
[    0.207702] pci_bus 0000:09: resource 1 [mem 0xf7200000-0xf72fffff]
[    0.207703] pci_bus 0000:0a: resource 0 [io  0xf000-0xffff]
[    0.207704] pci_bus 0000:0a: resource 1 [mem 0xf6000000-0xf70fffff]
[    0.207705] pci_bus 0000:0a: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.207706] pci_bus 0000:0b: resource 1 [mem 0xf7600000-0xf78fffff]
[    0.207707] pci_bus 0000:0c: resource 1 [mem 0xf7900000-0xf79fffff]
[    0.207900] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.207922] pci 0000:0a:00.1: D0 power state depends on 0000:0a:00.0
[    0.208065] PCI: CLS 64 bytes, default 64
[    0.208102] Trying to unpack rootfs image as initramfs...
[    0.379273] Freeing initrd memory: 96416K
[    0.379333] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.379335] software IO TLB: mapped [mem 0x00000000d300e000-0x00000000d700e000] (64MB)
[    0.379399] amd_uncore: 4  amd_df counters detected
[    0.379404] amd_uncore: 6  amd_l3 counters detected
[    0.379688] check: Scanning for low memory corruption every 60 seconds
[    0.380124] Initialise system trusted keyrings
[    0.380135] Key type blacklist registered
[    0.380167] workingset: timestamp_bits=36 max_order=23 bucket_order=0
[    0.380892] zbud: loaded
[    0.381100] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.381196] fuse: init (API version 7.33)
[    0.381326] integrity: Platform Keyring initialized
[    0.389615] Key type asymmetric registered
[    0.389617] Asymmetric key parser 'x509' registered
[    0.389623] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[    0.389659] io scheduler mq-deadline registered
[    0.391048] pcieport 0000:00:01.1: PME: Signaling with IRQ 25
[    0.391222] pcieport 0000:00:01.3: PME: Signaling with IRQ 26
[    0.391404] pcieport 0000:00:03.1: PME: Signaling with IRQ 27
[    0.391592] pcieport 0000:00:07.1: PME: Signaling with IRQ 28
[    0.392113] pcieport 0000:00:08.1: PME: Signaling with IRQ 30
[    0.392965] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.393004] efifb: probing for efifb
[    0.393035] efifb: showing boot graphics
[    0.394954] efifb: framebuffer at 0xf1000000, using 5628k, total 5625k
[    0.394955] efifb: mode is 1600x900x32, linelength=6400, pages=1
[    0.394956] efifb: scrolling: redraw
[    0.394956] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.395001] fbcon: Deferring console take-over
[    0.395002] fb0: EFI VGA frame buffer device
[    0.395097] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.395111] ACPI: Power Button [PWRB]
[    0.395134] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.395158] ACPI: Power Button [PWRF]
[    0.395195] Monitor-Mwait will be used to enter C-1 state
[    0.395202] ACPI: \_PR_.C000: Found 2 idle states
[    0.395280] ACPI: \_PR_.C002: Found 2 idle states
[    0.395337] ACPI: \_PR_.C004: Found 2 idle states
[    0.395414] ACPI: \_PR_.C006: Found 2 idle states
[    0.395510] ACPI: \_PR_.C008: Found 2 idle states
[    0.395611] ACPI: \_PR_.C00A: Found 2 idle states
[    0.395709] ACPI: \_PR_.C001: Found 2 idle states
[    0.395797] ACPI: \_PR_.C003: Found 2 idle states
[    0.395851] ACPI: \_PR_.C005: Found 2 idle states
[    0.395933] ACPI: \_PR_.C007: Found 2 idle states
[    0.396030] ACPI: \_PR_.C009: Found 2 idle states
[    0.396120] ACPI: \_PR_.C00B: Found 2 idle states
[    0.396330] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.417220] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.419082] Linux agpgart interface v0.103
[    0.422096] loop: module loaded
[    0.422283] libphy: Fixed MDIO Bus: probed
[    0.422284] tun: Universal TUN/TAP device driver, 1.6
[    0.422303] PPP generic driver version 2.4.2
[    0.422340] VFIO - User Level meta-driver version: 0.3
[    0.422390] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.422393] ehci-pci: EHCI PCI platform driver
[    0.422401] ehci-platform: EHCI generic platform driver
[    0.422405] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.422407] ohci-pci: OHCI PCI platform driver
[    0.422412] ohci-platform: OHCI generic platform driver
[    0.422416] uhci_hcd: USB Universal Host Controller Interface driver
[    0.422439] i8042: PNP: No PS/2 controller found.
[    0.422470] mousedev: PS/2 mouse device common for all mice
[    0.422548] rtc_cmos 00:02: RTC can wake from S4
[    0.422900] rtc_cmos 00:02: registered as rtc0
[    0.422991] rtc_cmos 00:02: setting system clock to 2021-07-03T08:48:48 UTC (1625302128)
[    0.423002] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.423007] i2c /dev entries driver
[    0.423032] device-mapper: uevent: version 1.0.3
[    0.423067] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: [email protected]
[    0.423078] platform eisa.0: Probing EISA bus 0
[    0.423080] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    0.423081] platform eisa.0: Cannot allocate resource for EISA slot 1
[    0.423082] platform eisa.0: Cannot allocate resource for EISA slot 2
[    0.423083] platform eisa.0: Cannot allocate resource for EISA slot 3
[    0.423084] platform eisa.0: Cannot allocate resource for EISA slot 4
[    0.423085] platform eisa.0: Cannot allocate resource for EISA slot 5
[    0.423086] platform eisa.0: Cannot allocate resource for EISA slot 6
[    0.423087] platform eisa.0: Cannot allocate resource for EISA slot 7
[    0.423087] platform eisa.0: Cannot allocate resource for EISA slot 8
[    0.423088] platform eisa.0: EISA: Detected 0 cards
[    0.423181] ledtrig-cpu: registered to indicate activity on CPUs
[    0.423183] EFI Variables Facility v0.08 2004-May-17
[    0.439688] drop_monitor: Initializing network drop monitor service
[    0.439802] NET: Registered protocol family 10
[    0.443169] Segment Routing with IPv6
[    0.443183] NET: Registered protocol family 17
[    0.443221] Key type dns_resolver registered
[    0.443800] microcode: CPU0: patch_level=0x0800820d
[    0.443807] microcode: CPU1: patch_level=0x0800820d
[    0.443813] microcode: CPU2: patch_level=0x0800820d
[    0.443820] microcode: CPU3: patch_level=0x0800820d
[    0.443826] microcode: CPU4: patch_level=0x0800820d
[    0.443833] microcode: CPU5: patch_level=0x0800820d
[    0.443839] microcode: CPU6: patch_level=0x0800820d
[    0.443843] microcode: CPU7: patch_level=0x0800820d
[    0.443849] microcode: CPU8: patch_level=0x0800820d
[    0.443854] microcode: CPU9: patch_level=0x0800820d
[    0.443860] microcode: CPU10: patch_level=0x0800820d
[    0.443867] microcode: CPU11: patch_level=0x0800820d
[    0.443888] microcode: Microcode Update Driver: v2.2.
[    0.443891] IPI shorthand broadcast: enabled
[    0.443899] sched_clock: Marking stable (475878670, -31994378)->(472571479, -28687187)
[    0.444033] registered taskstats version 1
[    0.444043] Loading compiled-in X.509 certificates
[    0.444541] Loaded X.509 cert 'Build time autogenerated kernel key: 3d9e6b1347e26cafe881f1c0d5181b91770d7b86'
[    0.444961] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
[    0.445376] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
[    0.446355] zswap: loaded using pool lzo/zbud
[    0.446520] Key type ._fscrypt registered
[    0.446521] Key type .fscrypt registered
[    0.446521] Key type fscrypt-provisioning registered
[    0.448092] Key type encrypted registered
[    0.448094] AppArmor: AppArmor sha1 policy hashing enabled
[    0.449075] ima: No TPM chip found, activating TPM-bypass!
[    0.449080] ima: Allocated hash algorithm: sha1
[    0.449086] ima: No architecture policies found
[    0.449097] evm: Initialising EVM extended attributes:
[    0.449097] evm: security.selinux
[    0.449098] evm: security.SMACK64
[    0.449098] evm: security.SMACK64EXEC
[    0.449099] evm: security.SMACK64TRANSMUTE
[    0.449100] evm: security.SMACK64MMAP
[    0.449100] evm: security.apparmor
[    0.449100] evm: security.ima
[    0.449101] evm: security.capability
[    0.449101] evm: HMAC attrs: 0x1
[    0.449472] PM:   Magic number: 13:863:825
[    0.449868] acpi_cpufreq: overriding BIOS provided _PSD data
[    0.450477] RAS: Correctable Errors collector initialized.
[    0.451528] Freeing unused decrypted memory: 2036K
[    0.451929] Freeing unused kernel image (initmem) memory: 2680K
[    0.467016] Write protecting the kernel read-only data: 26624k
[    0.467552] Freeing unused kernel image (text/rodata gap) memory: 2036K
[    0.467833] Freeing unused kernel image (rodata/data gap) memory: 1068K
[    0.499465] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.499470] Run /init as init process
[    0.499471]   with arguments:
[    0.499471]     /init
[    0.499472]     splash
[    0.499473]   with environment:
[    0.499473]     HOME=/
[    0.499474]     TERM=linux
[    0.578692] ahci 0000:02:00.1: version 3.0
[    0.578847] ahci 0000:02:00.1: SSS flag set, parallel bus scan disabled
[    0.578876] nvme nvme0: pci function 0000:01:00.0
[    0.578881] ahci 0000:02:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode
[    0.578885] ahci 0000:02:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
[    0.579401] scsi host0: ahci
[    0.579506] scsi host1: ahci
[    0.579592] scsi host2: ahci
[    0.579679] scsi host3: ahci
[    0.579772] scsi host4: ahci
[    0.579863] scsi host5: ahci
[    0.579959] scsi host6: ahci
[    0.580044] scsi host7: ahci
[    0.580088] ata1: SATA max UDMA/133 abar m131072@0xf7580000 port 0xf7580100 irq 41
[    0.580091] ata2: SATA max UDMA/133 abar m131072@0xf7580000 port 0xf7580180 irq 41
[    0.580093] ata3: DUMMY
[    0.580094] ata4: DUMMY
[    0.580096] ata5: SATA max UDMA/133 abar m131072@0xf7580000 port 0xf7580300 irq 41
[    0.580098] ata6: SATA max UDMA/133 abar m131072@0xf7580000 port 0xf7580380 irq 41
[    0.580099] ata7: DUMMY
[    0.580100] ata8: DUMMY
[    0.580223] ahci 0000:07:00.0: SSS flag set, parallel bus scan disabled
[    0.580262] ahci 0000:07:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    0.580264] ahci 0000:07:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
[    0.580498] scsi host8: ahci
[    0.580637] scsi host9: ahci
[    0.580713] ata9: SATA max UDMA/133 abar m512@0xf7410000 port 0xf7410100 irq 44
[    0.580717] ata10: SATA max UDMA/133 abar m512@0xf7410000 port 0xf7410180 irq 44
[    0.580911] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    0.580927] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
[    0.580959] ahci 0000:08:00.0: SSS flag set, parallel bus scan disabled
[    0.580999] ahci 0000:08:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    0.581002] ahci 0000:08:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
[    0.581210] scsi host10: ahci
[    0.581297] scsi host11: ahci
[    0.581330] ata11: SATA max UDMA/133 abar m512@0xf7300000 port 0xf7300100 irq 45
[    0.581333] ata12: SATA max UDMA/133 abar m512@0xf7300000 port 0xf7300180 irq 45
[    0.581438] ahci 0000:0c:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[    0.581441] ahci 0000:0c:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
[    0.581572] scsi host12: ahci
[    0.581617] ata13: SATA max UDMA/133 abar m4096@0xf7908000 port 0xf7908100 irq 47
[    0.584336] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[    0.584339] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[    0.584447] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[    0.594461] cryptd: max_cpu_qlen set to 1000
[    0.599449] AVX2 version of gcm_enc/dec engaged.
[    0.599452] AES CTR mode by8 optimization enabled
[    0.602655] libphy: r8169: probed
[    0.602832] r8169 0000:09:00.0 eth0: RTL8168h/8111h, a8:a1:59:0d:0a:2a, XID 541, IRQ 48
[    0.602837] r8169 0000:09:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[    0.615841] r8169 0000:09:00.0 enp9s0: renamed from eth0
[    0.636243] xhci_hcd 0000:02:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000410
[    0.636478] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.11
[    0.636481] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.636483] usb usb1: Product: xHCI Host Controller
[    0.636484] usb usb1: Manufacturer: Linux 5.11.0-7614-generic xhci-hcd
[    0.636486] usb usb1: SerialNumber: 0000:02:00.0
[    0.636590] hub 1-0:1.0: USB hub found
[    0.636607] hub 1-0:1.0: 10 ports detected
[    0.637199] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    0.637204] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[    0.637207] xhci_hcd 0000:02:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[    0.637259] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.637280] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.11
[    0.637283] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.637285] usb usb2: Product: xHCI Host Controller
[    0.637286] usb usb2: Manufacturer: Linux 5.11.0-7614-generic xhci-hcd
[    0.637288] usb usb2: SerialNumber: 0000:02:00.0
[    0.637358] hub 2-0:1.0: USB hub found
[    0.637368] hub 2-0:1.0: 4 ports detected
[    0.637874] xhci_hcd 0000:0b:00.3: xHCI Host Controller
[    0.637879] xhci_hcd 0000:0b:00.3: new USB bus registered, assigned bus number 3
[    0.637973] xhci_hcd 0000:0b:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x0000000000000410
[    0.638124] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.11
[    0.638126] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.638127] usb usb3: Product: xHCI Host Controller
[    0.638128] usb usb3: Manufacturer: Linux 5.11.0-7614-generic xhci-hcd
[    0.638129] usb usb3: SerialNumber: 0000:0b:00.3
[    0.638197] hub 3-0:1.0: USB hub found
[    0.638206] hub 3-0:1.0: 4 ports detected
[    0.638395] xhci_hcd 0000:0b:00.3: xHCI Host Controller
[    0.638399] xhci_hcd 0000:0b:00.3: new USB bus registered, assigned bus number 4
[    0.638401] xhci_hcd 0000:0b:00.3: Host supports USB 3.0 SuperSpeed
[    0.638417] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.638435] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.11
[    0.638439] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.638441] usb usb4: Product: xHCI Host Controller
[    0.638442] usb usb4: Manufacturer: Linux 5.11.0-7614-generic xhci-hcd
[    0.638443] usb usb4: SerialNumber: 0000:0b:00.3
[    0.638527] hub 4-0:1.0: USB hub found
[    0.638535] hub 4-0:1.0: 4 ports detected
[    0.777100] nvme nvme0: allocated 64 MiB host memory buffer.
[    0.807404] nvme nvme0: 7/0/0 default/read/poll queues
[    0.816157]  nvme0n1: p1 p2 p5
[    0.895040] ata9: SATA link down (SStatus 0 SControl 300)
[    0.896223] ata11: SATA link down (SStatus 0 SControl 300)
[    0.896252] ata13: SATA link down (SStatus 0 SControl 300)
[    0.973812] usb 1-2: new high-speed USB device number 2 using xhci_hcd
[    0.973819] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[    1.060036] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.060133] ata1.00: HPA detected: current 468860015, native 468862128
[    1.060162] ata1.00: ATA-11: Patriot Burst, SBFM61.3, max UDMA/133
[    1.060164] ata1.00: 468860015 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.060262] ata1.00: configured for UDMA/133
[    1.060348] scsi 0:0:0:0: Direct-Access     ATA      Patriot Burst    61.3 PQ: 0 ANSI: 5
[    1.060467] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.060485] sd 0:0:0:0: [sda] 468860015 512-byte logical blocks: (240 GB/224 GiB)
[    1.060492] sd 0:0:0:0: [sda] Write Protect is off
[    1.060493] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.060501] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.122256]  sda: sda1 sda2 sda3 sda4
[    1.123109] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.125254] usb 3-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 6.55
[    1.125262] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.125266] usb 3-1: Product: USB2.1 Hub
[    1.125270] usb 3-1: Manufacturer: GenesysLogic
[    1.182826] hub 3-1:1.0: USB hub found
[    1.183382] hub 3-1:1.0: 4 ports detected
[    1.219109] usb 1-2: New USB device found, idVendor=152d, idProduct=0583, bcdDevice= 2.08
[    1.219113] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.219115] usb 1-2: Product: USB 3.1 Storage Device
[    1.219116] usb 1-2: Manufacturer: USB 3.1 Storage Device
[    1.219117] usb 1-2: SerialNumber: DD56419883B1F
[    1.230785] usbcore: registered new interface driver usb-storage
[    1.248160] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[    1.250727] scsi host13: uas
[    1.250807] usbcore: registered new interface driver uas
[    1.251139] scsi 13:0:0:0: Direct-Access     KIOXIA-E XCERIA SSD       0208 PQ: 0 ANSI: 6
[    1.251907] sd 13:0:0:0: Attached scsi generic sg1 type 0
[    1.252519] sd 13:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    1.252521] sd 13:0:0:0: [sdb] 4096-byte physical blocks
[    1.252638] sd 13:0:0:0: [sdb] Write Protect is off
[    1.252640] sd 13:0:0:0: [sdb] Mode Sense: 6b 00 00 08
[    1.252880] sd 13:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.253082] sd 13:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[    1.272151] usb 4-1: New USB device found, idVendor=05e3, idProduct=0626, bcdDevice= 6.55
[    1.272158] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.272161] usb 4-1: Product: USB3.1 Hub
[    1.272164] usb 4-1: Manufacturer: GenesysLogic
[    1.295173] hub 4-1:1.0: USB hub found
[    1.295650] hub 4-1:1.0: 4 ports detected
[    1.328842] usb 2-3: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[    1.357144] usb 2-3: New USB device found, idVendor=05e3, idProduct=0612, bcdDevice=92.24
[    1.357150] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.357154] usb 2-3: Product: USB3.0 Hub
[    1.357156] usb 2-3: Manufacturer: GenesysLogic
[    1.363923] hub 2-3:1.0: USB hub found
[    1.364649] hub 2-3:1.0: 4 ports detected
[    1.374528] ata2: SATA link down (SStatus 0 SControl 300)
[    1.404024] tsc: Refined TSC clocksource calibration: 3193.999 MHz
[    1.404042] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e0a24cf65f, max_idle_ns: 440795271781 ns
[    1.404098] clocksource: Switched to clocksource tsc
[    1.480038] usb 1-3: new high-speed USB device number 3 using xhci_hcd
[    1.584346] usb 4-1.2: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[    1.609291] usb 4-1.2: New USB device found, idVendor=13fe, idProduct=6300, bcdDevice= 1.00
[    1.609301] usb 4-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.609305] usb 4-1.2: Product: USB DISK 3.0
[    1.609308] usb 4-1.2: Manufacturer: Wilk
[    1.609310] usb 4-1.2: SerialNumber: 07190BC7168E5216
[    1.609843] usb-storage 4-1.2:1.0: USB Mass Storage device detected
[    1.610095] scsi host14: usb-storage 4-1.2:1.0
[    1.663233] usb 1-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=92.24
[    1.663242] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.663246] usb 1-3: Product: USB2.0 Hub
[    1.663249] usb 1-3: Manufacturer: GenesysLogic
[    1.672247] hub 1-3:1.0: USB hub found
[    1.676188] hub 1-3:1.0: 4 ports detected
[    1.769393] usb 2-4: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[    1.796451] usb 2-4: New USB device found, idVendor=11b0, idProduct=3306, bcdDevice= 0.03
[    1.796460] usb 2-4: New USB device strings: Mfr=3, Product=4, SerialNumber=2
[    1.796464] usb 2-4: Product: UHS-II SD Reader
[    1.796467] usb 2-4: Manufacturer: Kingston
[    1.796470] usb 2-4: SerialNumber: 202003014407
[    1.807758] usb-storage 2-4:1.0: USB Mass Storage device detected
[    1.808158] scsi host15: usb-storage 2-4:1.0
[    1.848382] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.849333] ata5.00: ATA-8: WDC WD2500AAKX-753CA1, 19.01H19, max UDMA/133
[    1.849339] ata5.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.850351] ata5.00: configured for UDMA/133
[    1.850751] scsi 4:0:0:0: Direct-Access     ATA      WDC WD2500AAKX-7 1H19 PQ: 0 ANSI: 5
[    1.851053] sd 4:0:0:0: Attached scsi generic sg2 type 0
[    1.851129] sd 4:0:0:0: [sdc] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    1.851152] sd 4:0:0:0: [sdc] Write Protect is off
[    1.851157] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    1.851193] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.878421] sd 4:0:0:0: [sdc] Attached SCSI disk
[    1.920399] usb 1-8: new high-speed USB device number 4 using xhci_hcd
[    2.083280] usb 1-8: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
[    2.083289] usb 1-8: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.083293] usb 1-8: Product: USB 2.0 Hub
[    2.091288] hub 1-8:1.0: USB hub found
[    2.094251] hub 1-8:1.0: 4 ports detected
[    2.168452] ata6: SATA link down (SStatus 0 SControl 300)
[    2.236401] usb 1-10: new high-speed USB device number 5 using xhci_hcd
[    2.399314] usb 1-10: New USB device found, idVendor=214b, idProduct=7250, bcdDevice= 1.00
[    2.399323] usb 1-10: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.399327] usb 1-10: Product: USB2.0 HUB
[    2.408325] hub 1-10:1.0: USB hub found
[    2.411285] hub 1-10:1.0: 4 ports detected
[    2.484048] ata10: SATA link down (SStatus 0 SControl 300)
[    2.572392] usb 1-8.1: new high-speed USB device number 6 using xhci_hcd
[    2.621299] scsi 14:0:0:0: Direct-Access     Wilk     USB DISK 3.0     PMAP PQ: 0 ANSI: 6
[    2.621699] sd 14:0:0:0: Attached scsi generic sg3 type 0
[    2.622106] sd 14:0:0:0: [sdd] 242075648 512-byte logical blocks: (124 GB/115 GiB)
[    2.622240] sd 14:0:0:0: [sdd] Write Protect is off
[    2.622244] sd 14:0:0:0: [sdd] Mode Sense: 23 00 00 00
[    2.622389] sd 14:0:0:0: [sdd] No Caching mode page found
[    2.622392] sd 14:0:0:0: [sdd] Assuming drive cache: write through
[    2.640295] sd 14:0:0:0: [sdd] Attached SCSI removable disk
[    2.797337] ata12: SATA link down (SStatus 0 SControl 300)
[    2.810464] usb 1-8.1: New USB device found, idVendor=058f, idProduct=6387, bcdDevice= 1.00
[    2.810472] usb 1-8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.810476] usb 1-8.1: Product: Mass Storage
[    2.810478] usb 1-8.1: Manufacturer: Generic
[    2.810481] usb 1-8.1: SerialNumber: A9912006
[    2.814377] scsi 15:0:0:0: Direct-Access     Kingston UHS-II SD Reader 0003 PQ: 0 ANSI: 6
[    2.814604] sd 15:0:0:0: Attached scsi generic sg4 type 0
[    2.826419] usb-storage 1-8.1:1.0: USB Mass Storage device detected
[    2.826621] scsi host16: usb-storage 1-8.1:1.0
[    2.872042] usb 1-10.1: new low-speed USB device number 7 using xhci_hcd
[    3.146740] usb 1-10.1: New USB device found, idVendor=0db0, idProduct=0b30, bcdDevice= 1.10
[    3.146750] usb 1-10.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.146754] usb 1-10.1: Product: MSI GK30 Gaming Keyboard
[    3.146757] usb 1-10.1: Manufacturer: Micro-Star INT'L CO.,LTD
[    3.170325] hid: raw HID events driver (C) Jiri Kosina
[    3.258040] usbcore: registered new interface driver usbhid
[    3.258044] usbhid: USB HID core driver
[    3.260039] usb 1-8.4: new high-speed USB device number 8 using xhci_hcd
[    3.260661] input: Micro-Star INT'L CO.,LTD  MSI GK30 Gaming Keyboard  as /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-10/1-10.1/1-10.1:1.0/0003:0DB0:0B30.0001/input/input2
[    3.307667] sd 15:0:0:0: [sde] 967049216 512-byte logical blocks: (495 GB/461 GiB)
[    3.308481] sd 15:0:0:0: [sde] Write Protect is off
[    3.308486] sd 15:0:0:0: [sde] Mode Sense: 21 00 00 00
[    3.309225] sd 15:0:0:0: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    3.320258] hid-generic 0003:0DB0:0B30.0001: input,hidraw0: USB HID v1.10 Keyboard [Micro-Star INT'L CO.,LTD  MSI GK30 Gaming Keyboard ] on usb-0000:02:00.0-10.1/input0
[    3.320579] input: Micro-Star INT'L CO.,LTD  MSI GK30 Gaming Keyboard  Consumer Control as /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-10/1-10.1/1-10.1:1.1/0003:0DB0:0B30.0002/input/input3
[    3.333720]  sdb: sdb1
[    3.334409]  sde: sde1 sde2
[    3.335205] sd 13:0:0:0: [sdb] Attached SCSI disk
[    3.337231] sd 15:0:0:0: [sde] Attached SCSI removable disk
[    3.380153] input: Micro-Star INT'L CO.,LTD  MSI GK30 Gaming Keyboard  System Control as /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-10/1-10.1/1-10.1:1.1/0003:0DB0:0B30.0002/input/input4
[    3.380241] input: Micro-Star INT'L CO.,LTD  MSI GK30 Gaming Keyboard  Keyboard as /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-10/1-10.1/1-10.1:1.1/0003:0DB0:0B30.0002/input/input6
[    3.380379] hid-generic 0003:0DB0:0B30.0002: input,hiddev0,hidraw1: USB HID v1.10 Keyboard [Micro-Star INT'L CO.,LTD  MSI GK30 Gaming Keyboard ] on usb-0000:02:00.0-10.1/input1
[    3.495375] usb 1-8.4: New USB device found, idVendor=125f, idProduct=cb10, bcdDevice=11.00
[    3.495384] usb 1-8.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.495388] usb 1-8.4: Product: ADATA USB Flash Drive
[    3.495391] usb 1-8.4: Manufacturer: ADATA
[    3.495393] usb 1-8.4: SerialNumber: 27B1011090150014
[    3.513435] usb-storage 1-8.4:1.0: USB Mass Storage device detected
[    3.513640] scsi host17: usb-storage 1-8.4:1.0
[    3.556182] usb 1-10.2: new full-speed USB device number 9 using xhci_hcd
[    3.841039] scsi 16:0:0:0: Direct-Access     Generic  Flash Disk       8.07 PQ: 0 ANSI: 4
[    3.841537] sd 16:0:0:0: Attached scsi generic sg5 type 0
[    3.842120] sd 16:0:0:0: [sdf] 246962176 512-byte logical blocks: (126 GB/118 GiB)
[    3.842793] sd 16:0:0:0: [sdf] Write Protect is off
[    3.842799] sd 16:0:0:0: [sdf] Mode Sense: 23 00 00 00
[    3.843459] sd 16:0:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    3.858391]  sdf: sdf1
[    3.860751] sd 16:0:0:0: [sdf] Attached SCSI removable disk
[    3.884443] usb 1-10.2: New USB device found, idVendor=1b1c, idProduct=1b2e, bcdDevice= 3.06
[    3.884451] usb 1-10.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.884455] usb 1-10.2: Product: Corsair Gaming M65 Pro RGB Mouse
[    3.884458] usb 1-10.2: Manufacturer: Corsair
[    3.884460] usb 1-10.2: SerialNumber: 1100E018AF3E98245BF4592FF5001BC2
[    3.931933] input: Corsair Corsair Gaming M65 Pro RGB Mouse as /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-10/1-10.2/1-10.2:1.0/0003:1B1C:1B2E.0003/input/input8
[    3.932100] input: Corsair Corsair Gaming M65 Pro RGB Mouse as /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-10/1-10.2/1-10.2:1.0/0003:1B1C:1B2E.0003/input/input9
[    3.932186] input: Corsair Corsair Gaming M65 Pro RGB Mouse as /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-10/1-10.2/1-10.2:1.0/0003:1B1C:1B2E.0003/input/input10
[    3.932326] hid-generic 0003:1B1C:1B2E.0003: input,hiddev1,hidraw2: USB HID v1.11 Mouse [Corsair Corsair Gaming M65 Pro RGB Mouse] on usb-0000:02:00.0-10.2/input0
[    3.950827] hid-generic 0003:1B1C:1B2E.0004: hiddev2,hidraw3: USB HID v1.11 Device [Corsair Corsair Gaming M65 Pro RGB Mouse] on usb-0000:02:00.0-10.2/input1
[    4.040038] usb 1-10.3: new high-speed USB device number 10 using xhci_hcd
[    4.252504] usb 1-10.3: New USB device found, idVendor=145f, idProduct=02aa, bcdDevice= 0.01
[    4.252512] usb 1-10.3: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    4.252516] usb 1-10.3: Product: FHD Webcam
[    4.252518] usb 1-10.3: Manufacturer: SC
[    4.252521] usb 1-10.3: SerialNumber: 202001010001
[    4.364038] usb 1-10.4: new full-speed USB device number 11 using xhci_hcd
[    4.602543] usb 1-10.4: New USB device found, idVendor=3299, idProduct=4e4a, bcdDevice= 1.00
[    4.602552] usb 1-10.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.602556] usb 1-10.4: Product: SPC Gear Viro USB 7.1 Sound
[    4.602559] usb 1-10.4: Manufacturer: Solid State System Co.,Ltd.
[    4.602562] usb 1-10.4: SerialNumber: 000000000000
[    4.634284] input: Solid State System Co.,Ltd. SPC Gear Viro USB 7.1 Sound  as /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-10/1-10.4/1-10.4:1.3/0003:3299:4E4A.0005/input/input11
[    4.692706] hid-generic 0003:3299:4E4A.0005: input,hidraw4: USB HID v1.00 Device [Solid State System Co.,Ltd. SPC Gear Viro USB 7.1 Sound ] on usb-0000:02:00.0-10.4/input3
[    4.885834] scsi 17:0:0:0: Direct-Access     ADATA    USB Flash Drive  1100 PQ: 0 ANSI: 4
[    4.886274] sd 17:0:0:0: Attached scsi generic sg6 type 0
[    4.887452] sd 17:0:0:0: [sdg] 30310400 512-byte logical blocks: (15.5 GB/14.5 GiB)
[    4.888539] sd 17:0:0:0: [sdg] Write Protect is off
[    4.888543] sd 17:0:0:0: [sdg] Mode Sense: 43 00 00 00
[    4.889645] sd 17:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.925315]  sdg:
[    4.929454] sd 17:0:0:0: [sdg] Attached SCSI removable disk
[    5.859527] system76_acpi: loading out-of-tree module taints kernel.
[    5.859568] system76_acpi: module verification failed: signature and/or required key missing - tainting kernel
[    5.862025] system76: Model does not utilize this driver
[    5.907021] usbcore: registered new interface driver system76-io
[    5.996012] raid6: avx2x4   gen() 14678 MB/s
[    6.064010] raid6: avx2x4   xor()  7310 MB/s
[    6.132024] raid6: avx2x2   gen() 25738 MB/s
[    6.200028] raid6: avx2x2   xor() 15680 MB/s
[    6.268172] raid6: avx2x1   gen() 23438 MB/s
[    6.336268] raid6: avx2x1   xor() 15772 MB/s
[    6.404158] raid6: sse2x4   gen() 15356 MB/s
[    6.472159] raid6: sse2x4   xor()  8028 MB/s
[    6.540152] raid6: sse2x2   gen() 17114 MB/s
[    6.608156] raid6: sse2x2   xor() 10405 MB/s
[    6.676161] raid6: sse2x1   gen() 13342 MB/s
[    6.744027] raid6: sse2x1   xor()  8137 MB/s
[    6.744028] raid6: using algorithm avx2x2 gen() 25738 MB/s
[    6.744029] raid6: .... xor() 15680 MB/s, rmw enabled
[    6.744030] raid6: using avx2x2 recovery algorithm
[    6.744993] xor: automatically using best checksumming function   avx       
[    6.745707] async_tx: api initialized (async)
[  277.161985] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[  277.681690] systemd[1]: Inserted module 'autofs4'
[  277.777168] systemd[1]: Successfully credited entropy passed from boot loader.
[  277.783925] systemd[1]: systemd 245.4-4ubuntu3.6pop0~1617377648~20.04~eafddeb running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[  277.804062] systemd[1]: Detected architecture x86-64.
[  277.820408] systemd[1]: Set hostname to <pop-os>.
[  278.270383] systemd[1]: Created slice system-modprobe.slice.
[  278.270566] systemd[1]: Created slice Cryptsetup Units Slice.
[  278.270761] systemd[1]: Created slice User and Session Slice.
[  278.270802] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[  278.270916] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[  278.270958] systemd[1]: Reached target User and Group Name Lookups.
[  278.270969] systemd[1]: Reached target Remote File Systems.
[  278.270976] systemd[1]: Reached target Slices.
[  278.271025] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[  278.271084] systemd[1]: Listening on LVM2 poll daemon socket.
[  278.271135] systemd[1]: Listening on Syslog Socket.
[  278.271167] systemd[1]: Listening on initctl Compatibility Named Pipe.
[  278.271276] systemd[1]: Listening on Journal Audit Socket.
[  278.271326] systemd[1]: Listening on Journal Socket (/dev/log).
[  278.271384] systemd[1]: Listening on Journal Socket.
[  278.271452] systemd[1]: Listening on udev Control Socket.
[  278.271500] systemd[1]: Listening on udev Kernel Socket.
[  278.272161] systemd[1]: Mounting Huge Pages File System...
[  278.272732] systemd[1]: Mounting POSIX Message Queue File System...
[  278.273328] systemd[1]: Mounting Kernel Debug File System...
[  278.273930] systemd[1]: Mounting Kernel Trace File System...
[  278.274992] systemd[1]: Starting Journal Service...
[  278.275594] systemd[1]: Starting Availability of block devices...
[  278.276510] systemd[1]: Starting Set the console keyboard layout...
[  278.277235] systemd[1]: Starting Create list of static device nodes for the current kernel...
[  278.277900] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[  278.278558] systemd[1]: Starting Load Kernel Module drm...
[  278.279317] systemd[1]: Started Nameserver information manager.
[  278.279436] systemd[1]: Reached target Network (Pre).
[  278.281553] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[  278.295256] systemd[1]: Starting Load Kernel Modules...
[  278.295852] systemd[1]: Starting Remount Root and Kernel File Systems...
[  278.296404] systemd[1]: Starting udev Coldplug all Devices...
[  278.296878] systemd[1]: Starting Uncomplicated firewall...
[  278.297837] systemd[1]: Mounted Huge Pages File System.
[  278.297936] systemd[1]: Mounted POSIX Message Queue File System.
[  278.298024] systemd[1]: Mounted Kernel Debug File System.
[  278.298103] systemd[1]: Mounted Kernel Trace File System.
[  278.298399] systemd[1]: Finished Availability of block devices.
[  278.298714] systemd[1]: Finished Create list of static device nodes for the current kernel.
[  278.326256] systemd[1]: Finished Uncomplicated firewall.
[  278.347303] systemd[1]: [email protected]: Succeeded.
[  278.347528] systemd[1]: Finished Load Kernel Module drm.
[  278.407157] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro. Quota mode: none.
[  278.408253] systemd[1]: Finished Remount Root and Kernel File Systems.
[  278.431747] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[  278.431773] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[  278.432490] systemd[1]: Starting Load/Save Random Seed...
[  278.433132] systemd[1]: Starting Create System Users...
[  278.458163] lp: driver loaded but no devices found
[  278.462976] ppdev: user-space parallel port driver
[  278.465648] systemd[1]: Finished Load/Save Random Seed.
[  278.467712] systemd[1]: Finished Create System Users.
[  278.468462] systemd[1]: Starting Create Static Device Nodes in /dev...
[  278.474379] systemd[1]: Finished Load Kernel Modules.
[  278.475192] systemd[1]: Mounting FUSE Control File System...
[  278.475886] systemd[1]: Mounting Kernel Configuration File System...
[  278.476644] systemd[1]: Starting Apply Kernel Variables...
[  278.477277] systemd[1]: Mounted FUSE Control File System.
[  278.477865] systemd[1]: Mounted Kernel Configuration File System.
[  278.481068] systemd[1]: Finished Create Static Device Nodes in /dev.
[  278.482109] systemd[1]: Starting udev Kernel Device Manager...
[  278.482595] systemd[1]: Started Journal Service.
[  278.489792] systemd-journald[599]: Received client request to flush runtime journal.
[  278.873253] ccp 0000:0b:00.2: enabling device (0000 -> 0002)
[  278.877885] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
[  278.877889] RAPL PMU: hw unit of domain package 2^-16 Joules
[  278.880034] ccp 0000:0b:00.2: ccp enabled
[  278.890304] pstore: Using crash dump compression: deflate
[  278.890316] pstore: Registered efi as persistent store backend
[  278.902414] mc: Linux media interface: v0.10
[  278.919838] videodev: Linux video capture interface: v2.00
[  278.971027] kvm: Nested Virtualization enabled
[  278.971069] SVM: kvm: Nested Paging enabled
[  278.971071] SVM: Virtual VMLOAD VMSAVE supported
[  278.971072] SVM: Virtual GIF supported
[  278.999595] MCE: In-kernel MCE decoding enabled.
[  279.059020] EDAC amd64: F17h detected (node 0).
[  279.059071] EDAC amd64: Node 0: DRAM ECC disabled.
[  279.062491] uvcvideo: Found UVC 1.00 device FHD Webcam (145f:02aa)
[  279.127062] input: FHD Webcam: FHD Webcam as /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-10/1-10.3/1-10.3:1.0/input/input12
[  279.127130] usbcore: registered new interface driver uvcvideo
[  279.127132] USB Video Class driver (1.1.1)
[  279.188562] EDAC amd64: F17h detected (node 0).
[  279.188608] EDAC amd64: Node 0: DRAM ECC disabled.
[  279.246739] nvidia: module license 'NVIDIA' taints kernel.
[  279.246744] Disabling lock debugging due to kernel taint
[  279.296875] EDAC amd64: F17h detected (node 0).
[  279.296922] EDAC amd64: Node 0: DRAM ECC disabled.
[  279.302440] intel_rapl_common: Found RAPL domain package
[  279.302445] intel_rapl_common: Found RAPL domain core
[  279.310964] usb 1-10.3: current rate 48000 is different from the runtime rate 22050
[  279.318141] nvidia-nvlink: Nvlink Core is being initialized, major device number 510

[  279.318705] nvidia 0000:0a:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[  279.342684] snd_hda_intel 0000:0a:00.1: Disabling MSI
[  279.342694] snd_hda_intel 0000:0a:00.1: Handle vga_switcheroo audio client
[  279.342768] snd_hda_intel 0000:0c:00.3: enabling device (0000 -> 0002)
[  279.373641] snd_hda_codec_realtek hdaudioC2D0: autoconfig for ALC892: line_outs=2 (0x17/0x14/0x0/0x0/0x0) type:line
[  279.373647] snd_hda_codec_realtek hdaudioC2D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[  279.373649] snd_hda_codec_realtek hdaudioC2D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[  279.373650] snd_hda_codec_realtek hdaudioC2D0:    mono: mono_out=0x0
[  279.373652] snd_hda_codec_realtek hdaudioC2D0:    inputs:
[  279.373653] snd_hda_codec_realtek hdaudioC2D0:      Front Mic=0x19
[  279.373654] snd_hda_codec_realtek hdaudioC2D0:      Rear Mic=0x18
[  279.373655] snd_hda_codec_realtek hdaudioC2D0:      Line=0x1a
[  279.375991] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input13
[  279.376114] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input14
[  279.376227] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input15
[  279.376319] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input16
[  279.376412] input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input17
[  279.376508] input: HDA NVidia HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input18
[  279.380969] audit: type=1400 audit(1625302407.453:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=866 comm="apparmor_parser"
[  279.381599] audit: type=1400 audit(1625302407.453:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=869 comm="apparmor_parser"
[  279.382722] audit: type=1400 audit(1625302407.453:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=873 comm="apparmor_parser"
[  279.382726] audit: type=1400 audit(1625302407.453:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=873 comm="apparmor_parser"
[  279.382758] audit: type=1400 audit(1625302407.453:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=868 comm="apparmor_parser"
[  279.383354] audit: type=1400 audit(1625302407.453:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=874 comm="apparmor_parser"
[  279.383358] audit: type=1400 audit(1625302407.453:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=874 comm="apparmor_parser"
[  279.383360] audit: type=1400 audit(1625302407.453:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=874 comm="apparmor_parser"
[  279.387770] audit: type=1400 audit(1625302407.457:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=878 comm="apparmor_parser"
[  279.388203] audit: type=1400 audit(1625302407.461:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=870 comm="apparmor_parser"
[  279.393545] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card2/input19
[  279.393594] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card2/input20
[  279.393634] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card2/input21
[  279.393678] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card2/input22
[  279.393721] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card2/input23
[  279.434727] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  460.73.01  Thu Apr  1 21:40:36 UTC 2021
[  279.504183] Adding 4193784k swap on /dev/mapper/cryptswap.  Priority:-2 extents:1 across:4193784k SSFS
[  279.528776] EDAC amd64: F17h detected (node 0).
[  279.528824] EDAC amd64: Node 0: DRAM ECC disabled.
[  279.529558] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  460.73.01  Thu Apr  1 21:32:31 UTC 2021
[  279.550658] [drm] [nvidia-drm] [GPU ID 0x00000a00] Loading driver
[  279.558985] usb 1-10.3: current rate 48000 is different from the runtime rate 32000
[  279.800877] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000dffff window]
[  279.800883] caller os_map_kernel_space.part.0+0x77/0xa0 [nvidia] mapping multiple BARs
[  279.804625] EDAC amd64: F17h detected (node 0).
[  279.804669] EDAC amd64: Node 0: DRAM ECC disabled.
[  280.152577] EDAC amd64: F17h detected (node 0).
[  280.152618] EDAC amd64: Node 0: DRAM ECC disabled.
[  280.303061] usb 1-10.3: current rate 48000 is different from the runtime rate 96000
[  280.353094] EDAC amd64: F17h detected (node 0).
[  280.353136] EDAC amd64: Node 0: DRAM ECC disabled.
[  280.448516] EDAC amd64: F17h detected (node 0).
[  280.448560] EDAC amd64: Node 0: DRAM ECC disabled.
[  280.455247] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:0a:00.0 on minor 0
[  280.484179] nvidia_uvm: module uses symbols from proprietary module nvidia, inheriting taint.
[  280.499527] nvidia-uvm: Loaded the UVM driver, major device number 508.
[  280.551085] usb 1-10.3: current rate 48000 is different from the runtime rate 44100
[  280.552936] EDAC amd64: F17h detected (node 0).
[  280.552976] EDAC amd64: Node 0: DRAM ECC disabled.
[  280.692447] EDAC amd64: F17h detected (node 0).
[  280.692489] EDAC amd64: Node 0: DRAM ECC disabled.
[  280.764012] Generic FE-GE Realtek PHY r8169-900:00: attached PHY driver (mii_bus:phy_addr=r8169-900:00, irq=IGNORE)
[  280.860436] EDAC amd64: F17h detected (node 0).
[  280.860476] EDAC amd64: Node 0: DRAM ECC disabled.
[  280.964250] r8169 0000:09:00.0 enp9s0: Link is Down
[  280.964504] EDAC amd64: F17h detected (node 0).
[  280.964549] EDAC amd64: Node 0: DRAM ECC disabled.
[  281.047156] usb 1-10.3: current rate 48000 is different from the runtime rate 96000
[  281.495190] usb 1-10.4: Warning! Unlikely big volume range (=1008), cval->res is probably wrong.
[  281.495194] usb 1-10.4: [49] FU [PCM Playback Volume] ch = 2, val = -16129/-1/16
[  281.583200] usb 1-10.4: Warning! Unlikely big volume range (=496), cval->res is probably wrong.
[  281.583204] usb 1-10.4: [50] FU [Mic Capture Volume] ch = 1, val = 0/7936/16
[  281.583420] usbcore: registered new interface driver snd-usb-audio
[  284.032743] r8169 0000:09:00.0 enp9s0: Link is Up - 100Mbps/Full - flow control rx/tx
[  284.032766] IPv6: ADDRCONF(NETDEV_CHANGE): enp9s0: link becomes ready
[  284.490815] rfkill: input handler disabled
[  289.078694] rfkill: input handler enabled
[  292.334885] EXT4-fs (sde2): warning: mounting fs with errors, running e2fsck is recommended
[  292.358520] EXT4-fs (sde2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[  292.441170] rfkill: input handler disabled
[  320.184593] r8169 0000:09:00.0 enp9s0: Link is Down
[  342.329780] usb 1-10.3: cannot get connectors status: req = 0x81, wValue = 0xa00, wIndex = 0x302, type = 0
[  342.336775] ------------[ cut here ]------------
[  342.336779] WARNING: CPU: 2 PID: 3603 at /var/lib/dkms/nvidia/460.73.01/build/nvidia-drm/nvidia-drm-drv.c:530 nv_drm_master_set+0x27/0x30 [nvidia_drm]
[  342.336796] Modules linked in: nvidia_uvm(POE) nvidia_drm(POE) nvidia_modeset(POE) snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec_hdmi ledtrig_audio snd_hda_intel snd_intel_dspcfg soundwire_intel soundwire_generic_allocation soundwire_cadence snd_hda_codec snd_hda_core soundwire_bus intel_rapl_msr nvidia(POE) snd_usb_audio nls_iso8859_1 intel_rapl_common snd_soc_core snd_usbmidi_lib snd_compress ac97_bus snd_hwdep snd_pcm_dmaengine uvcvideo snd_seq_midi edac_mce_amd snd_seq_midi_event snd_rawmidi videobuf2_vmalloc videobuf2_memops snd_seq snd_pcm kvm_amd videobuf2_v4l2 videobuf2_common snd_seq_device drm_kms_helper snd_timer videodev joydev input_leds kvm cec mc rc_core fb_sys_fops snd syscopyarea sysfillrect sysimgblt wmi_bmof efi_pstore soundcore ccp rapl k10temp mac_hid sch_fq_codel msr parport_pc ppdev lp parport drm ip_tables x_tables autofs4 dm_crypt raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath
[  342.336898]  linear system76_io(OE) system76_acpi(OE) hid_generic usbhid hid uas usb_storage crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel crypto_simd cryptd glue_helper i2c_piix4 r8169 xhci_pci realtek nvme ahci xhci_pci_renesas libahci nvme_core wmi gpio_amdpt gpio_generic
[  342.336932] CPU: 2 PID: 3603 Comm: gst-plugin-scan Tainted: P           OE     5.11.0-7614-generic #15~1622578982~20.04~383c0a9-Ubuntu
[  342.336938] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./B450 Gaming K4, BIOS P4.10 03/05/2020
[  342.336941] RIP: 0010:nv_drm_master_set+0x27/0x30 [nvidia_drm]
[  342.336951] Code: 0f 1f 00 0f 1f 44 00 00 55 48 8b 47 48 48 8b 78 20 48 8b 05 cb 5c 00 00 48 89 e5 48 8b 40 28 e8 9f 00 6d da 84 c0 74 02 5d c3 <0f> 0b 5d c3 0f 1f 44 00 00 0f 1f 44 00 00 55 48 89 e5 41 57 41 56
[  342.336955] RSP: 0018:ffffb341418a3b18 EFLAGS: 00010246
[  342.336960] RAX: 0000000000000000 RBX: ffff9cf23062da00 RCX: 0000000000000008
[  342.336963] RDX: ffffffffc0df5e98 RSI: 0000000000000282 RDI: ffffffffc0df5e60
[  342.336966] RBP: ffffb341418a3b18 R08: 0000000000000008 R09: ffffb341418a3b00
[  342.336968] R10: 0000000000000000 R11: ffffffffc038f1d8 R12: ffff9cf1cbc0d000
[  342.336970] R13: ffff9cf1cc9d3180 R14: 0000000000000001 R15: ffff9cf1cbc0d000
[  342.336973] FS:  00007f0e72aff340(0000) GS:ffff9cf5ca880000(0000) knlGS:0000000000000000
[  342.336976] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  342.336979] CR2: 0000557d83121c08 CR3: 000000016e6da000 CR4: 00000000003506e0
[  342.336982] Call Trace:
[  342.336987]  drm_set_master+0x55/0x80 [drm]
[  342.337029]  drm_new_set_master+0x4d/0xa0 [drm]
[  342.337068]  drm_master_open+0x6e/0xa0 [drm]
[  342.337108]  drm_open+0x18a/0x260 [drm]
[  342.337148]  drm_stub_open+0xae/0x110 [drm]
[  342.337191]  chrdev_open+0xd3/0x1c0
[  342.337198]  ? cdev_default_release+0x20/0x20
[  342.337203]  do_dentry_open+0x156/0x370
[  342.337208]  vfs_open+0x2d/0x30
[  342.337212]  path_openat+0xb17/0x1120
[  342.337219]  ? copyout+0x31/0x50
[  342.337224]  ? page_counter_cancel+0x23/0x30
[  342.337230]  ? __memcg_kmem_uncharge+0x23/0x40
[  342.337235]  do_filp_open+0x91/0x100
[  342.337239]  ? __check_object_size+0x13f/0x150
[  342.337246]  do_sys_openat2+0x21c/0x2e0
[  342.337251]  do_sys_open+0x46/0x80
[  342.337255]  __x64_sys_openat+0x20/0x30
[  342.337260]  do_syscall_64+0x38/0x90
[  342.337266]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  342.337272] RIP: 0033:0x7f0e72e6feab
[  342.337276] Code: 25 00 00 41 00 3d 00 00 41 00 74 4b 64 8b 04 25 18 00 00 00 85 c0 75 67 44 89 e2 48 89 ee bf 9c ff ff ff b8 01 01 00 00 0f 05 <48> 3d 00 f0 ff ff 0f 87 91 00 00 00 48 8b 4c 24 28 64 48 33 0c 25
[  342.337280] RSP: 002b:00007fff9b1cbe20 EFLAGS: 00000246 ORIG_RAX: 0000000000000101
[  342.337284] RAX: ffffffffffffffda RBX: 0000557d83119190 RCX: 00007f0e72e6feab
[  342.337287] RDX: 0000000000080002 RSI: 0000557d8311fbd0 RDI: 00000000ffffff9c
[  342.337289] RBP: 0000557d8311fbd0 R08: 00007f0e72851c30 R09: 0000557d8311edd0
[  342.337291] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000080002
[  342.337293] R13: 00007f0e72798e30 R14: 0000557d830e0410 R15: 00007f0e727770b4
[  342.337298] ---[ end trace af304454392a7e39 ]---
[  409.664040] Generic FE-GE Realtek PHY r8169-900:00: attached PHY driver (mii_bus:phy_addr=r8169-900:00, irq=IGNORE)
[  409.864505] r8169 0000:09:00.0 enp9s0: Link is Down
[  412.731000] r8169 0000:09:00.0 enp9s0: Link is Up - 100Mbps/Full - flow control rx/tx
[  412.731022] IPv6: ADDRCONF(NETDEV_CHANGE): enp9s0: link becomes ready
#9
0
Ten wynik dmesg jest z czasu kiedy dyski były podpięte pod kontroler ASM1062?
#10
0
Przy wywołaniu polecenia, do kontrolera był podłączony tylko jeden dysk - Kingston UV500. Próbowałem też wcześniej z dyskiem Western Digital Blue (HDD), ale objaw był taki sam - brak widocznego dysku.


Skocz do:




Użytkownicy przeglądający ten wątek: 1 gości