Ocena wątku:
  • 0 głosów - średnia: 0
  • 1
  • 2
  • 3
  • 4
  • 5
Karta Fire Wire IEEE-1394
#1
0
Laudetur Jezus Chrystus et virginis Maryja!

Mamy komputerek stacjonarny z nowszą płytą główną Gygabite, a w nim sporo miejsca.
Kamerka DV Panasonik podpięta została do starej Karty Pinacle na gnieździe PCI kabelkiem Fire Wire.
Kamerka ma wysyłać gotowe nagrania DV lub nadawać bieżący obraz z kamerki.
Zainstalowany jest program "Kino-Video Editor".
i coś nie działa.

Jak by tu dalej działać ???
Odpowiedz
#2
1
Odpowiedz
#3
0
[Obrazek: TrxK8jzl.png]
Odpowiedz
#4
1
Better response on post RE: Karta Fire Wire   IEEE-1394Przeczytaj jeszcze raz co podlinkował yahoob2.
Pełna konfiguracja i tekst w znacznikach code, i bez obrazków, obrazki to na ścianę, biurko albo jako zakładka do modlitewnika Wink.
Odpowiedz
#5
0
Kod:
~$ lspci
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers (rev 06)
00:02.0 VGA compatible controller: Intel Corporation HD Graphics 630 (rev 04)
00:08.0 System peripheral: Intel Corporation Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th Gen Core Processor Gaussian Mixture Model
00:14.0 USB controller: Intel Corporation 200 Series/Z370 Chipset Family USB 3.0 xHCI Controller
00:16.0 Communication controller: Intel Corporation 200 Series PCH CSME HECI #1
00:17.0 SATA controller: Intel Corporation 200 Series PCH SATA controller [AHCI mode]
00:1b.0 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #21 (rev f0)
00:1c.0 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #5 (rev f0)
00:1c.6 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #7 (rev f0)
00:1c.7 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #8 (rev f0)
00:1d.0 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #9 (rev f0)
00:1d.2 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #11 (rev f0)
00:1d.3 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #12 (rev f0)
00:1f.0 ISA bridge: Intel Corporation 200 Series PCH LPC Controller (B250)
00:1f.2 Memory controller: Intel Corporation 200 Series/Z370 Chipset Family Power Management Controller
00:1f.3 Audio device: Intel Corporation 200 Series PCH HD Audio
00:1f.4 SMBus: Intel Corporation 200 Series/Z370 Chipset Family SMBus Controller
00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (2) I219-V
01:00.0 Non-Volatile memory controller: Intel Corporation Device f1a5 (rev 03)
02:00.0 USB controller: ASMedia Technology Inc. Device 2142
04:00.0 PCI bridge: Integrated Technology Express, Inc. IT8892E PCIe to PCI Bridge (rev 71)
05:00.0 FireWire (IEEE 1394): LSI Corporation FW322/323 [TrueFire] 1394a Controller (rev 04)
~$


Dodano po pewnym czasie:

Kod:
root@.....# lsmod
Module                  Size  Used by
pci_stub              16384  1
vboxpci                24576  0
vboxnetadp            32768  0
vboxnetflt            28672  0
vboxdrv              339968  3 vboxnetadp,vboxnetflt,vboxpci
intel_rapl_msr        20480  0
mei_hdcp              24576  0
intel_rapl_common      24576  1 intel_rapl_msr
snd_hda_codec_hdmi    49152  1
x86_pkg_temp_thermal    20480  0
intel_powerclamp      20480  0
snd_hda_codec_realtek  106496  1
snd_hda_codec_generic    73728  1 snd_hda_codec_realtek
ledtrig_audio          16384  2 snd_hda_codec_generic,snd_hda_codec_realtek
coretemp              20480  0
kvm_intel            249856  0
snd_hda_intel          40960  5
snd_hda_codec        118784  4 snd_hda_intel,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
kvm                  573440  1 kvm_intel
snd_hda_core          77824  5 snd_hda_intel,snd_hda_codec,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hwdep              16384  1 snd_hda_codec
irqbypass              16384  1 kvm
snd_pcm                90112  5 snd_hda_intel,snd_hda_codec,snd_hda_core,snd_hda_codec_hdmi
crc32_pclmul          16384  0
snd_seq_midi          20480  0
snd_seq_midi_event    16384  1 snd_seq_midi
aesni_intel            16384  0
aes_i586              20480  1 aesni_intel
crypto_simd            16384  1 aesni_intel
snd_rawmidi            32768  1 snd_seq_midi
cryptd                20480  1 crypto_simd
intel_cstate          16384  0
intel_rapl_perf        16384  0
snd_seq                61440  2 snd_seq_midi_event,snd_seq_midi
snd_seq_device        16384  3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer              32768  2 snd_seq,snd_pcm
snd                    69632  20 snd_hda_intel,snd_hwdep,snd_seq,snd_hda_codec,snd_timer,snd_rawmidi,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_seq_device,snd_hda_codec_realtek,snd_pcm
soundcore              16384  1 snd
joydev                24576  0
input_leds            16384  0
mei_me                36864  1
mei                    94208  3 mei_hdcp,mei_me
acpi_pad              20480  0
mac_hid                16384  0
ip6t_REJECT            16384  1
nf_reject_ipv6        20480  1 ip6t_REJECT
nf_log_ipv6            16384  5
xt_hl                  16384  22
ip6t_rt                20480  3
ipt_REJECT            16384  1
nf_reject_ipv4        16384  1 ipt_REJECT
nf_log_ipv4            16384  5
nf_log_common          16384  2 nf_log_ipv6,nf_log_ipv4
xt_LOG                20480  10
sch_fq_codel          20480  2
xt_limit              16384  13
xt_tcpudp              20480  18
xt_addrtype            16384  4
xt_conntrack          16384  16
ip6table_filter        16384  1
ip6_tables            24576  53 ip6table_filter
nf_conntrack_netbios_ns    16384  0
nf_conntrack_broadcast    16384  1 nf_conntrack_netbios_ns
nf_nat_ftp            20480  0
nf_nat                40960  1 nf_nat_ftp
nf_conntrack_ftp      20480  1 nf_nat_ftp
nf_conntrack          122880  6 nf_conntrack_ftp,nf_conntrack_broadcast,nf_nat_ftp,nf_conntrack_netbios_ns,xt_conntrack,nf_nat
nf_defrag_ipv6        24576  1 nf_conntrack
nf_defrag_ipv4        16384  1 nf_conntrack
iptable_filter        16384  1
parport_pc            32768  1
ppdev                  24576  0
bpfilter              20480  0
lp                    20480  0
parport                49152  3 lp,parport_pc,ppdev
ip_tables              24576  9 iptable_filter
x_tables              32768  13 xt_LOG,ipt_REJECT,ip_tables,iptable_filter,xt_tcpudp,xt_limit,ip6t_REJECT,ip6table_filter,xt_addrtype,ip6t_rt,xt_conntrack,ip6_tables,xt_hl
autofs4                45056  2
btrfs                1196032  0
xor                    28672  1 btrfs
zstd_compress        155648  1 btrfs
raid6_pq              106496  1 btrfs
libcrc32c              16384  3 nf_conntrack,btrfs,nf_nat
dm_mirror              24576  0
dm_region_hash        20480  1 dm_mirror
dm_log                20480  2 dm_mirror,dm_region_hash
hid_generic            16384  0
usbhid                53248  0
hid                  110592  2 hid_generic,usbhid
i915                1531904  9
i2c_algo_bit          16384  1 i915
drm_kms_helper        159744  1 i915
syscopyarea            16384  1 drm_kms_helper
sysfillrect            16384  1 drm_kms_helper
sysimgblt              16384  1 drm_kms_helper
fb_sys_fops            16384  1 drm_kms_helper
firewire_ohci          36864  0
firewire_core          57344  1 firewire_ohci
ahci                  36864  1
nvme                  36864  1
nvme_core              90112  3 nvme
drm                  393216  6 i915,drm_kms_helper
e1000e                229376  0
crc_itu_t              16384  1 firewire_core
libahci                32768  1 ahci
wmi                    28672  0
video                  49152  1 i915
root@....#

Rozumiem, że nie pojmuję i to jest pewne. Wcisnął bym jeszcze emotikona, ale boję się, ze coś wybuchnie.

Dodano po pewnym czasie:
dmesg|pastebinit
https://pastebin.com/mW3vHbcL

Dodano po pewnym czasie:
Dobrze by było mieć możność edytować post aż nadejdzie następny i zamknie samoczynnie możliwość edycji poprzednika.
Smile
1 godzina na poprawki może być za mało, żeby wyszło arcydzieło. A tak można tylko popatrzeć sobie na swoje błędy, jak ja na "Gróbego Jasia" w swoim dyktandzie z podstawówki, jakieś 55 lat temu nazat.
Odpowiedz
#6
1
Better response on post RE: Karta Fire Wire   IEEE-1394Na razie w tych wynikach dostrzegam, że karta pinacle może być tu:
05:00.0 FireWire (IEEE 1394): LSI Corporation FW322/323 [TrueFire] 1394a Controller (rev 04)

Proponuję też zastanowić się w osobnym wątku nad:
Cytat:[ 0.248332] ************************************************************
[ 0.248332] ** WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! **
[ 0.248332] ** **
[ 0.248333] ** You are using 32-bit PTI on a 64-bit PCID-capable CPU. **
[ 0.248333] ** Your performance will increase dramatically if you **
[ 0.248333] ** switch to a 64-bit kernel! **
[ 0.248334] ** **
[ 0.248334] ** WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! **
[ 0.248334] ************************************************************

1 godzina jest nie bez powodu.
Wciąż nie mamy tego o co proszono.
Tyle w temacie.
Odpowiedz
#7
0
Kod:
root@.........# inxi -CGM
Machine:
  Type: Desktop System: Gigabyte product: B250-HD3P v: N/A serial: N/A
  Mobo: Gigabyte model: B250-HD3P-CF v: x.x serial: N/A
  UEFI [Legacy]: American Megatrends v: F7 date: 04/24/2017
CPU:
  Topology: Dual Core model: Intel Pentium G4620 bits: 64 type: MT MCP
  L2 cache: 3072 KiB
  Speed: 800 MHz min/max: 800/3700 MHz Core speeds (MHz): 1: 800 2: 800
  3: 800 4: 800
Graphics:
  Device-1: Intel HD Graphics 630 driver: i915 v: kernel
  Display: x11 server: X.Org 1.19.6 driver: modesetting unloaded: fbdev,vesa
  resolution: 1440x900~60Hz
  OpenGL:
  renderer: Mesa DRI Intel HD Graphics 630 (Kaby Lake GT2) x86/MMX/SSE2
  v: 4.5 Mesa 19.2.8
root@......#
----------------------------------------------------------------------------------
root@........# inxi -M
Machine:
  Type: Desktop System: Gigabyte product: B250-HD3P v: N/A serial: N/A
  Mobo: Gigabyte model: B250-HD3P-CF v: x.x serial: N/A
  UEFI [Legacy]: American Megatrends v: F7 date: 04/24/2017
root@........#

----------------------------------------------------------------------------------
root@........# inxi -Fxz
System:
  Host: HUSARIA Kernel: 5.3.0-40-generic i686 bits: 32 compiler: gcc
  v: 7.4.0 Desktop: Xfce 4.14.1 Distro: Linux Mint 19.3 Tricia
  base: Ubuntu 18.04 bionic
Machine:
  Type: Desktop System: Gigabyte product: B250-HD3P v: N/A serial: N/A
  Mobo: Gigabyte model: B250-HD3P-CF v: x.x serial: N/A
  UEFI [Legacy]: American Megatrends v: F7 date: 04/24/2017
CPU:
  Topology: Dual Core model: Intel Pentium G4620 bits: 64 type: MT MCP
  arch: Kaby Lake rev: 9 L2 cache: 3072 KiB
  flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 29598
  Speed: 800 MHz min/max: 800/3700 MHz Core speeds (MHz): 1: 800 2: 800
  3: 800 4: 800
Graphics:
  Device-1: Intel HD Graphics 630 vendor: Gigabyte driver: i915 v: kernel
  bus ID: 00:02.0
  Display: x11 server: X.Org 1.19.6 driver: modesetting unloaded: fbdev,vesa
  resolution: 1440x900~60Hz
  OpenGL:
  renderer: Mesa DRI Intel HD Graphics 630 (Kaby Lake GT2) x86/MMX/SSE2
  v: 4.5 Mesa 19.2.8 direct render: Yes
Audio:
  Device-1: Intel 200 Series PCH HD Audio vendor: Gigabyte
  driver: snd_hda_intel v: kernel bus ID: 00:1f.3
  Sound Server: ALSA v: k5.3.0-40-generic
Network:
  Device-1: Intel Ethernet I219-V vendor: Gigabyte driver: e1000e v: 3.2.6-k
  port: f040 bus ID: 00:1f.6
  IF: enp0s31f6 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives:
  Local Storage: total: 7.39 TiB used: 70.85 GiB (0.9%)
  ID-1: /dev/nvme0n1 vendor: Intel model: SSDPEKKW128G7 size: 119.24 GiB
  ID-2: /dev/sda vendor: Seagate model: ST2000DM006-2DM164 size: 1.82 TiB
  temp: 33 C
  ID-3: /dev/sdb vendor: Seagate model: ST31000524AS size: 931.51 GiB
  temp: 35 C
  ID-4: /dev/sdc vendor: Seagate model: ST2000DM001-1ER164 size: 1.82 TiB
  temp: 34 C
  ID-5: /dev/sdd vendor: Seagate model: ST2000DM008-2FR102 size: 1.82 TiB
  temp: 35 C
  ID-6: /dev/sde vendor: Seagate model: ST31000524AS size: 931.51 GiB
  temp: 32 C
Partition:
  ID-1: / size: 116.87 GiB used: 70.85 GiB (60.6%) fs: ext4
  dev: /dev/nvme0n1p1
  ID-2: swap-1 size: 9.15 GiB used: 164 KiB (0.0%) fs: swap dev: /dev/sda2
Sensors:
  System Temperatures: cpu: 32.0 C mobo: N/A
  Fan Speeds (RPM): N/A
Info:
  Processes: 201 Uptime: 1d 6h 19m Memory: 7.69 GiB used: 1.77 GiB (23.0%)
  Init: systemd runlevel: 5 Compilers: gcc: 7.4.0 Shell: bash v: 4.4.20
  inxi: 3.0.32
-----------------------------------------------------------------------------------
root@...........# inxi -Sr
System:
  Host: HUSARIA Kernel: 5.3.0-40-generic i686 bits: 32 Desktop: Xfce 4.14.1
  Distro: Linux Mint 19.3 Tricia
Repos:
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/additional-repositories.list
  1: deb http://archive.canonical.com/ tina partner
  2: deb https://deb.opera.com/opera-stable/ stable non-free
  Active apt repos in: /etc/apt/sources.list.d/danielrichter2007-grub-customizer-bionic.list
  1: deb http://ppa.launchpad.net/danielrichter2007/grub-customizer/ubuntu bionic main
  2: deb-src http://ppa.launchpad.net/danielrichter2007/grub-customizer/ubuntu bionic main
  Active apt repos in: /etc/apt/sources.list.d/linrunner-tlp-bionic.list
  1: deb http://ppa.launchpad.net/linrunner/tlp/ubuntu bionic main
  2: deb-src http://ppa.launchpad.net/linrunner/tlp/ubuntu bionic main
  Active apt repos in: /etc/apt/sources.list.d/official-package-repositories.list
  1: deb http://ftp.icm.edu.pl/pub/Linux/dist/linuxmint/packages tricia main upstream import backport
  2: deb http://ftp.agh.edu.pl/ubuntu bionic main restricted universe multiverse
  3: deb http://ftp.agh.edu.pl/ubuntu bionic-updates main restricted universe multiverse
  4: deb http://ftp.agh.edu.pl/ubuntu bionic-backports main restricted universe multiverse
  5: deb http://security.ubuntu.com/ubuntu/ bionic-security main restricted universe multiverse
  6: deb http://archive.canonical.com/ubuntu/ bionic partner
  Active apt repos in: /etc/apt/sources.list.d/peek-developers-stable-bionic.list
  1: deb http://ppa.launchpad.net/peek-developers/stable/ubuntu bionic main
  2: deb-src http://ppa.launchpad.net/peek-developers/stable/ubuntu bionic main
  Active apt repos in: /etc/apt/sources.list.d/skype-unstable.list
  1: deb [arch=amd64] https://repo.skype.com/deb unstable main
root@...........#
--------------------------------------------------------------------------
root@.........# inxi -N -xxx
Network:
  Device-1: Intel Ethernet I219-V vendor: Gigabyte driver: e1000e v: 3.2.6-k
  port: f040 bus ID: 00:1f.6 chip ID: 8086:15b8
root@..........#
---------------------------------------------------------------------------
root@...............# lsusb
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 007: ID 046d:c31c Logitech, Inc. Keyboard K120
Bus 001 Device 006: ID 046d:c05a Logitech, Inc. M90/M100 Optical Mouse
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


root@..........# lsblk
NAME        MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
sda          8:0    0  1,8T  0 disk
├─sda1        8:1    0  63,4G  0 part
├─sda2        8:2    0  9,2G  0 part [SWAP]
├─sda3        8:3    0 662,5G  0 part
└─sda4        8:4    0  1,1T  0 part
sdb          8:16  0 931,5G  0 disk
├─sdb1        8:17  0 302,8G  0 part
└─sdb2        8:18  0 628,8G  0 part
sdc          8:32  0  1,8T  0 disk
├─sdc1        8:33  0 640,9G  0 part
└─sdc2        8:34  0  1,2T  0 part
sdd          8:48  0  1,8T  0 disk
├─sdd1        8:49  0  1,4T  0 part
└─sdd2        8:50  0 486,1G  0 part
sde          8:64  0 931,5G  0 disk
├─sde1        8:65  0 390,6G  0 part
└─sde4        8:68  0 540,9G  0 part
sr0          11:0    1  1024M  0 rom 
nvme0n1    259:0    0 119,2G  0 disk
└─nvme0n1p1 259:1    0 119,2G  0 part /


root@.......# lscpu
Architektura:        i686
Tryb(y) pracy CPU:  32-bit, 64-bit
Kolejność bajtów:    Little Endian
CPU:                4
Lista aktywnych CPU: 0-3
Wątków na rdzeń:    2
Rdzeni na gniazdo:  2
Gniazd:              1
ID producenta:      GenuineIntel
Rodzina CPU:        6
Model:              158
Nazwa modelu:        Intel(R) Pentium(R) CPU G4620 @ 3.70GHz
Wersja:              9
CPU MHz:            800.018
CPU max MHz:        3700,0000
CPU min MHz:        800,0000
BogoMIPS:            7399.70
Wirtualizacja:      VT-x
Cache L1d:          32K
Cache L1i:          32K
Cache L2:            256K
Cache L3:            3072K
Flagi:              fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg cx16 xtpr pdcm sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave rdrand lahf_lm abm 3dnowprefetch cpuid_fault pti ssbd ibrs ibpb stibp tpr_shadow vnmi flexpriority ept vpid ept_ad fsgsbase tsc_adjust smep erms invpcid mpx rdseed smap clflushopt intel_pt xsaveopt xsavec xgetbv1 xsaves dtherm arat pln pts hwp hwp_notify hwp_act_window hwp_epp md_clear flush_l1d
root@..............#
Nie wiem co jeszcze należy wysłać. Dziękuję za cierpliwość nad biedną duszą.
Odpowiedz
#8
1
Better response on post RE: Karta Fire Wire   IEEE-1394Wrzuć wynik lspci -k
Odpowiedz
#9
0
Oj, tłumacz Google mnie przeraził. Dla zaoszczędzenia czasu Załogi LinuxMint.
1. Sformatowałem dysk systemowy SSD M.2  nvme0n1  119.24 GiB
2. Obraz ISO był z University of Warsaw, jeszcze gorący od laserka.
3. Tym razem, szczęśliwym trafem, podczas instalacji nie kliknąłem na linijkę z napisem UEFI, a w coś innego i mam już system Xfce 64-bitowy.
4. "Kino Video Editor" gdzieś się stracił i nie mam jeszcze innego.
Kod jest nowy, aktualny:
Kod:
root@..........# lspci -k
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers (rev 06)
Subsystem: Gigabyte Technology Co., Ltd Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers
Kernel driver in use: skl_uncore
00:02.0 VGA compatible controller: Intel Corporation HD Graphics 630 (rev 04)
Subsystem: Gigabyte Technology Co., Ltd HD Graphics 630
Kernel driver in use: i915
Kernel modules: i915
00:08.0 System peripheral: Intel Corporation Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th Gen Core Processor Gaussian Mixture Model
Subsystem: Gigabyte Technology Co., Ltd Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th Gen Core Processor Gaussian Mixture Model
00:14.0 USB controller: Intel Corporation 200 Series/Z370 Chipset Family USB 3.0 xHCI Controller
Subsystem: Gigabyte Technology Co., Ltd 200 Series PCH USB 3.0 xHCI Controller
Kernel driver in use: xhci_hcd
00:16.0 Communication controller: Intel Corporation 200 Series PCH CSME HECI #1
Subsystem: Gigabyte Technology Co., Ltd 200 Series PCH CSME HECI
Kernel driver in use: mei_me
Kernel modules: mei_me
00:17.0 SATA controller: Intel Corporation 200 Series PCH SATA controller [AHCI mode]
Subsystem: Gigabyte Technology Co., Ltd 200 Series PCH SATA controller [AHCI mode]
Kernel driver in use: ahci
Kernel modules: ahci
00:1b.0 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #21 (rev f0)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.0 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #5 (rev f0)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.6 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #7 (rev f0)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.7 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #8 (rev f0)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #9 (rev f0)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.2 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #11 (rev f0)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.3 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #12 (rev f0)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1f.0 ISA bridge: Intel Corporation 200 Series PCH LPC Controller (B250)
Subsystem: Gigabyte Technology Co., Ltd 200 Series PCH LPC Controller (B250)
00:1f.2 Memory controller: Intel Corporation 200 Series/Z370 Chipset Family Power Management Controller
Subsystem: Gigabyte Technology Co., Ltd 200 Series PCH PMC
00:1f.3 Audio device: Intel Corporation 200 Series PCH HD Audio
Subsystem: Gigabyte Technology Co., Ltd 200 Series PCH HD Audio
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1f.4 SMBus: Intel Corporation 200 Series/Z370 Chipset Family SMBus Controller
Subsystem: Gigabyte Technology Co., Ltd 200 Series PCH SMBus Controller
Kernel modules: i2c_i801
00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (2) I219-V
Subsystem: Gigabyte Technology Co., Ltd Ethernet Connection (2) I219-V
Kernel driver in use: e1000e
Kernel modules: e1000e
01:00.0 Non-Volatile memory controller: Intel Corporation Device f1a5 (rev 03)
Subsystem: Intel Corporation Device 390a
Kernel driver in use: nvme
Kernel modules: nvme
02:00.0 USB controller: ASMedia Technology Inc. Device 2142
Subsystem: Gigabyte Technology Co., Ltd Device 5007
Kernel driver in use: xhci_hcd
04:00.0 PCI bridge: Integrated Technology Express, Inc. IT8892E PCIe to PCI Bridge (rev 71)
05:00.0 FireWire (IEEE 1394): LSI Corporation FW322/323 [TrueFire] 1394a Controller (rev 04)
Subsystem: Pinnacle Systems Inc. FW322/323 [TrueFire] 1394a Controller
Kernel driver in use: firewire_ohci
Kernel modules: firewire_ohci
root@..........#

Dodano po pewnym czasie:
dmesg dała w terminalu taką odpowiedź
(jakby od góry było czegoś brak)
Kod:
[ 3386.360648] sd 5:0:0:0: [sde] Synchronizing SCSI cache
[ 3386.360650] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[ 3386.360701] sd 4:0:0:0: [sdd] Synchronizing SCSI cache
[ 3386.360773] sd 2:0:0:0: [sdb] Stopping disk
[ 3386.360846] sd 1:0:0:0: [sda] Stopping disk
[ 3386.360924] sd 4:0:0:0: [sdd] Stopping disk
[ 3386.365077] sd 5:0:0:0: [sde] Stopping disk
[ 3386.402932] sd 3:0:0:0: [sdc] Synchronizing SCSI cache
[ 3386.403111] sd 3:0:0:0: [sdc] Stopping disk
[ 3387.173258] ACPI: Preparing to enter system sleep state S3
[ 3387.175809] PM: Saving platform NVS memory
[ 3387.175908] Disabling non-boot CPUs ...
[ 3387.198048] smpboot: CPU 1 is now offline
[ 3387.222414] smpboot: CPU 2 is now offline
[ 3387.244865] IRQ 122: no longer affine to CPU3
[ 3387.244872] IRQ 123: no longer affine to CPU3
[ 3387.244878] IRQ 126: no longer affine to CPU3
[ 3387.244882] IRQ 127: no longer affine to CPU3
[ 3387.244888] IRQ 134: no longer affine to CPU3
[ 3387.245901] smpboot: CPU 3 is now offline
[ 3387.248962] ACPI: Low-level resume complete
[ 3387.249050] PM: Restoring platform NVS memory
[ 3387.250887] Enabling non-boot CPUs ...
[ 3387.250924] x86: Booting SMP configuration:
[ 3387.250924] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 3387.251149] microcode: sig=0x906e9, pf=0x2, revision=0x42
[ 3387.252297]  cache: parent cpu1 should not be sleeping
[ 3387.252419] CPU1 is up
[ 3387.252441] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 3387.252690] microcode: sig=0x906e9, pf=0x2, revision=0xca
[ 3387.252773]  cache: parent cpu2 should not be sleeping
[ 3387.253085] CPU2 is up
[ 3387.253108] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 3387.253425]  cache: parent cpu3 should not be sleeping
[ 3387.253555] CPU3 is up
[ 3387.255987] ACPI: Waking up from system sleep state S3
[ 3387.305960] sd 2:0:0:0: [sdb] Starting disk
[ 3387.305984] sd 4:0:0:0: [sdd] Starting disk
[ 3387.305988] sd 3:0:0:0: [sdc] Starting disk
[ 3387.306030] sd 1:0:0:0: [sda] Starting disk
[ 3387.306044] sd 5:0:0:0: [sde] Starting disk
[ 3387.314695] parport_pc 00:01: activated
[ 3387.317129] serial 00:03: activated
[ 3387.317282] rtc_cmos 00:06: Alarms can be up to one month in the future
[ 3387.678845] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3387.684982] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[ 3387.685004] No Local Variables are initialized for Method [_GTF]
[ 3387.685008] No Arguments are initialized for method [_GTF]
[ 3387.685013] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.PRT0._GTF, AE_NOT_FOUND (20170831/psparse-550)
[ 3387.696143] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[ 3387.696163] No Local Variables are initialized for Method [_GTF]
[ 3387.696166] No Arguments are initialized for method [_GTF]
[ 3387.696171] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.PRT0._GTF, AE_NOT_FOUND (20170831/psparse-550)
[ 3387.696198] ata1.00: configured for UDMA/133
[ 3387.749594] acpi LNXPOWER:16: Turning OFF
[ 3387.749835] acpi LNXPOWER:15: Turning OFF
[ 3387.750070] acpi LNXPOWER:14: Turning OFF
[ 3387.750335] acpi LNXPOWER:13: Turning OFF
[ 3387.750566] acpi LNXPOWER:12: Turning OFF
[ 3387.750795] acpi LNXPOWER:11: Turning OFF
[ 3387.751026] acpi LNXPOWER:10: Turning OFF
[ 3387.751257] acpi LNXPOWER:0f: Turning OFF
[ 3387.751489] acpi LNXPOWER:0e: Turning OFF
[ 3387.751719] acpi LNXPOWER:0d: Turning OFF
[ 3387.752027] acpi LNXPOWER:0c: Turning OFF
[ 3387.752264] acpi LNXPOWER:0b: Turning OFF
[ 3387.752494] acpi LNXPOWER:0a: Turning OFF
[ 3387.752724] acpi LNXPOWER:09: Turning OFF
[ 3387.752971] acpi LNXPOWER:08: Turning OFF
[ 3387.753203] acpi LNXPOWER:07: Turning OFF
[ 3387.753434] acpi LNXPOWER:06: Turning OFF
[ 3387.753663] acpi LNXPOWER:05: Turning OFF
[ 3387.753894] acpi LNXPOWER:04: Turning OFF
[ 3387.754124] acpi LNXPOWER:03: Turning OFF
[ 3387.754297] OOM killer enabled.
[ 3387.754298] Restarting tasks ...
[ 3387.755156] pci_bus 0000:05: Allocating resources
[ 3387.755194] pci 0000:04:00.0: bridge window [io  0x1000-0x0fff] to [bus 05] add_size 1000
[ 3387.755205] pci 0000:04:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000 add_align 100000
[ 3387.755221] pci 0000:04:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 3387.755227] pci 0000:04:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 3387.755234] pci 0000:04:00.0: BAR 13: no space for [io  size 0x1000]
[ 3387.755239] pci 0000:04:00.0: BAR 13: failed to assign [io  size 0x1000]
[ 3387.755249] pci 0000:04:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 3387.755254] pci 0000:04:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 3387.755260] pci 0000:04:00.0: BAR 13: no space for [io  size 0x1000]
[ 3387.755265] pci 0000:04:00.0: BAR 13: failed to assign [io  size 0x1000]
[ 3387.767520] done.
[ 3387.768810] video LNXVIDEO:00: Restoring backlight state
[ 3387.768816] PM: suspend exit
[ 3387.772244] [drm] RC6 on
[ 3387.891935] firewire_core 0000:05:00.0: rediscovered device fw0
[ 3387.903937] usb 1-6: new full-speed USB device number 11 using xhci_hcd
[ 3388.032116] usb 1-6: device descriptor read/64, error -71
[ 3388.268040] usb 1-6: device descriptor read/64, error -71
[ 3388.504056] usb 1-6: new full-speed USB device number 12 using xhci_hcd
[ 3388.632090] usb 1-6: device descriptor read/64, error -71
[ 3388.867978] usb 1-6: device descriptor read/64, error -71
[ 3388.975977] usb usb1-port6: attempt power cycle
[ 3389.627874] usb 1-6: new full-speed USB device number 13 using xhci_hcd
[ 3389.628059] usb 1-6: Device not responding to setup address.
[ 3389.836016] usb 1-6: Device not responding to setup address.
[ 3390.043925] usb 1-6: device not accepting address 13, error -71
[ 3390.171945] usb 1-6: new full-speed USB device number 14 using xhci_hcd
[ 3390.172172] usb 1-6: Device not responding to setup address.
[ 3390.199615] e1000e: enp0s31f6 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 3390.199622] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO
[ 3390.380159] usb 1-6: Device not responding to setup address.
[ 3390.587891] usb 1-6: device not accepting address 14, error -71
[ 3390.587925] usb usb1-port6: unable to enumerate USB device
[ 3391.943905] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3391.951270] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[ 3391.951295] No Local Variables are initialized for Method [_GTF]
[ 3391.951299] No Arguments are initialized for method [_GTF]
[ 3391.951303] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.PRT4._GTF, AE_NOT_FOUND (20170831/psparse-550)
[ 3392.011369] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[ 3392.011393] No Local Variables are initialized for Method [_GTF]
[ 3392.011397] No Arguments are initialized for method [_GTF]
[ 3392.011402] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.PRT4._GTF, AE_NOT_FOUND (20170831/psparse-550)
[ 3392.047077] ata5.00: configured for UDMA/133
[ 3392.687967] ata2: link is slow to respond, please be patient (ready=0)
[ 3392.687986] ata4: link is slow to respond, please be patient (ready=0)
[ 3392.731897] ata6: link is slow to respond, please be patient (ready=0)
[ 3392.731907] ata3: link is slow to respond, please be patient (ready=0)
[ 3393.571991] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3393.577615] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[ 3393.577639] No Local Variables are initialized for Method [_GTF]
[ 3393.577642] No Arguments are initialized for method [_GTF]
[ 3393.577647] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.PRT2._GTF, AE_NOT_FOUND (20170831/psparse-550)
[ 3393.579365] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[ 3393.579389] No Local Variables are initialized for Method [_GTF]
[ 3393.579392] No Arguments are initialized for method [_GTF]
[ 3393.579397] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.PRT2._GTF, AE_NOT_FOUND (20170831/psparse-550)
[ 3393.579638] ata3.00: configured for UDMA/133
[ 3393.631983] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3393.633301] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[ 3393.633325] No Local Variables are initialized for Method [_GTF]
[ 3393.633328] No Arguments are initialized for method [_GTF]
[ 3393.633333] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.PRT5._GTF, AE_NOT_FOUND (20170831/psparse-550)
[ 3393.635107] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[ 3393.635131] No Local Variables are initialized for Method [_GTF]
[ 3393.635134] No Arguments are initialized for method [_GTF]
[ 3393.635139] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.PRT5._GTF, AE_NOT_FOUND (20170831/psparse-550)
[ 3393.635356] ata6.00: configured for UDMA/133
[ 3393.767799] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3393.768503] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[ 3393.768527] No Local Variables are initialized for Method [_GTF]
[ 3393.768531] No Arguments are initialized for method [_GTF]
[ 3393.768536] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.PRT1._GTF, AE_NOT_FOUND (20170831/psparse-550)
[ 3393.769818] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[ 3393.769834] No Local Variables are initialized for Method [_GTF]
[ 3393.769837] No Arguments are initialized for method [_GTF]
[ 3393.769841] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.PRT1._GTF, AE_NOT_FOUND (20170831/psparse-550)
[ 3393.770186] ata2.00: configured for UDMA/133
[ 3393.888029] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3393.888867] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[ 3393.888891] No Local Variables are initialized for Method [_GTF]
[ 3393.888895] No Arguments are initialized for method [_GTF]
[ 3393.888900] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.PRT3._GTF, AE_NOT_FOUND (20170831/psparse-550)
[ 3393.890427] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[ 3393.890451] No Local Variables are initialized for Method [_GTF]
[ 3393.890454] No Arguments are initialized for method [_GTF]
[ 3393.890459] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.PRT3._GTF, AE_NOT_FOUND (20170831/psparse-550)
[ 3393.890805] ata4.00: configured for UDMA/133
[ 3394.228085] e1000e: enp0s31f6 NIC Link is Down
[ 3394.233983] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
[ 3394.428126] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
[ 3396.472100] e1000e: enp0s31f6 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 3396.472102] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO
[ 3396.472152] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready
[ 3479.394423] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 3604.386721] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 3729.378777] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 3854.374801] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 3961.467693] audit: type=1400 audit(1582365785.556:30): apparmor="DENIED" operation="capable" profile="/usr/sbin/cupsd" pid=740 comm="cupsd" capability=12  capname="net_admin"
[ 3979.366815] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 4104.358901] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 4229.350683] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 4354.342928] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 4479.334792] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 4604.326920] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 4729.318809] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 4854.318831] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 4869.785258] PM: suspend entry (deep)
[ 4869.785259] PM: Syncing filesystems ... done.
[ 4869.797830] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 4869.800190] OOM killer disabled.
[ 4869.800192] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 4869.801498] Suspending console(s) (use no_console_suspend to debug)
[ 4869.811490] serial 00:03: disabled
[ 4869.812167] parport_pc 00:01: disabled
[ 4869.812551] e1000e: EEE TX LPI TIMER: 00000011
[ 4869.818795] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[ 4869.818853] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[ 4869.818856] sd 3:0:0:0: [sdc] Synchronizing SCSI cache
[ 4869.818858] sd 4:0:0:0: [sdd] Synchronizing SCSI cache
[ 4869.818875] sd 5:0:0:0: [sde] Synchronizing SCSI cache
[ 4869.819018] sd 2:0:0:0: [sdb] Stopping disk
[ 4869.819056] sd 1:0:0:0: [sda] Stopping disk
[ 4869.819058] sd 3:0:0:0: [sdc] Stopping disk
[ 4869.819090] sd 4:0:0:0: [sdd] Stopping disk
[ 4869.823093] sd 5:0:0:0: [sde] Stopping disk
[ 4870.587484] ACPI: Preparing to enter system sleep state S3
[ 4870.590020] PM: Saving platform NVS memory
[ 4870.590118] Disabling non-boot CPUs ...
[ 4870.603255] IRQ 134: no longer affine to CPU1
[ 4870.605071] smpboot: CPU 1 is now offline
[ 4870.629408] smpboot: CPU 2 is now offline
[ 4870.651114] IRQ 123: no longer affine to CPU3
[ 4870.651120] IRQ 126: no longer affine to CPU3
[ 4870.651124] IRQ 127: no longer affine to CPU3
[ 4870.652142] smpboot: CPU 3 is now offline
[ 4870.655225] ACPI: Low-level resume complete
[ 4870.655312] PM: Restoring platform NVS memory
[ 4870.657151] Enabling non-boot CPUs ...
[ 4870.657184] x86: Booting SMP configuration:
[ 4870.657184] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 4870.657408] microcode: sig=0x906e9, pf=0x2, revision=0x42
[ 4870.658554]  cache: parent cpu1 should not be sleeping
[ 4870.658677] CPU1 is up
[ 4870.658697] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 4870.658928] microcode: sig=0x906e9, pf=0x2, revision=0xca
[ 4870.659012]  cache: parent cpu2 should not be sleeping
[ 4870.659327] CPU2 is up
[ 4870.659346] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 4870.659662]  cache: parent cpu3 should not be sleeping
[ 4870.659795] CPU3 is up
[ 4870.662230] ACPI: Waking up from system sleep state S3
[ 4870.712321] sd 1:0:0:0: [sda] Starting disk
[ 4870.712326] sd 2:0:0:0: [sdb] Starting disk
[ 4870.712339] sd 3:0:0:0: [sdc] Starting disk
[ 4870.712427] sd 5:0:0:0: [sde] Starting disk
[ 4870.712432] sd 4:0:0:0: [sdd] Starting disk
[ 4870.717894] parport_pc 00:01: activated
[ 4870.720366] serial 00:03: activated
[ 4870.720519] rtc_cmos 00:06: Alarms can be up to one month in the future
[ 4871.085035] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4871.091194] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[ 4871.091213] No Local Variables are initialized for Method [_GTF]
[ 4871.091217] No Arguments are initialized for method [_GTF]
[ 4871.091221] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.PRT0._GTF, AE_NOT_FOUND (20170831/psparse-550)
[ 4871.102317] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[ 4871.102337] No Local Variables are initialized for Method [_GTF]
[ 4871.102340] No Arguments are initialized for method [_GTF]
[ 4871.102345] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.PRT0._GTF, AE_NOT_FOUND (20170831/psparse-550)
[ 4871.102372] ata1.00: configured for UDMA/133
[ 4871.159672] acpi LNXPOWER:16: Turning OFF
[ 4871.159922] acpi LNXPOWER:15: Turning OFF
[ 4871.160169] acpi LNXPOWER:14: Turning OFF
[ 4871.160416] acpi LNXPOWER:13: Turning OFF
[ 4871.160660] acpi LNXPOWER:12: Turning OFF
[ 4871.160901] acpi LNXPOWER:11: Turning OFF
[ 4871.161143] acpi LNXPOWER:10: Turning OFF
[ 4871.161387] acpi LNXPOWER:0f: Turning OFF
[ 4871.161629] acpi LNXPOWER:0e: Turning OFF
[ 4871.161873] acpi LNXPOWER:0d: Turning OFF
[ 4871.162208] acpi LNXPOWER:0c: Turning OFF
[ 4871.162453] acpi LNXPOWER:0b: Turning OFF
[ 4871.162684] acpi LNXPOWER:0a: Turning OFF
[ 4871.162914] acpi LNXPOWER:09: Turning OFF
[ 4871.163149] acpi LNXPOWER:08: Turning OFF
[ 4871.163378] acpi LNXPOWER:07: Turning OFF
[ 4871.163608] acpi LNXPOWER:06: Turning OFF
[ 4871.163835] acpi LNXPOWER:05: Turning OFF
[ 4871.164064] acpi LNXPOWER:04: Turning OFF
[ 4871.164295] acpi LNXPOWER:03: Turning OFF
[ 4871.164467] OOM killer enabled.
[ 4871.164468] Restarting tasks ...
[ 4871.176398] pci_bus 0000:05: Allocating resources
[ 4871.176436] pci 0000:04:00.0: bridge window [io  0x1000-0x0fff] to [bus 05] add_size 1000
[ 4871.176450] pci 0000:04:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000 add_align 100000
[ 4871.176466] pci 0000:04:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 4871.176472] pci 0000:04:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 4871.176478] pci 0000:04:00.0: BAR 13: no space for [io  size 0x1000]
[ 4871.176482] pci 0000:04:00.0: BAR 13: failed to assign [io  size 0x1000]
[ 4871.176490] pci 0000:04:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 4871.176495] pci 0000:04:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 4871.176501] pci 0000:04:00.0: BAR 13: no space for [io  size 0x1000]
[ 4871.176505] pci 0000:04:00.0: BAR 13: failed to assign [io  size 0x1000]
[ 4871.177615] done.
[ 4871.178936] video LNXVIDEO:00: Restoring backlight state
[ 4871.178941] PM: suspend exit
[ 4871.189685] [drm] RC6 on
[ 4871.302146] usb 1-6: new full-speed USB device number 15 using xhci_hcd
[ 4871.362390] firewire_core 0000:05:00.0: rediscovered device fw0
[ 4871.430318] usb 1-6: device descriptor read/64, error -71
[ 4871.666321] usb 1-6: device descriptor read/64, error -71
[ 4871.902147] usb 1-6: new full-speed USB device number 16 using xhci_hcd
[ 4872.030163] usb 1-6: device descriptor read/64, error -71
[ 4872.266081] usb 1-6: device descriptor read/64, error -71
[ 4872.374215] usb usb1-port6: attempt power cycle
[ 4873.026144] usb 1-6: new full-speed USB device number 17 using xhci_hcd
[ 4873.026331] usb 1-6: Device not responding to setup address.
[ 4873.157813] e1000e: enp0s31f6 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 4873.157820] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO
[ 4873.238162] usb 1-6: Device not responding to setup address.
[ 4873.446117] usb 1-6: device not accepting address 17, error -71
[ 4873.574122] usb 1-6: new full-speed USB device number 18 using xhci_hcd
[ 4873.574314] usb 1-6: Device not responding to setup address.
[ 4873.786192] usb 1-6: Device not responding to setup address.
[ 4873.994110] usb 1-6: device not accepting address 18, error -71
[ 4873.994190] usb usb1-port6: unable to enumerate USB device
[ 4875.242198] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4875.244136] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[ 4875.244160] No Local Variables are initialized for Method [_GTF]
[ 4875.244163] No Arguments are initialized for method [_GTF]
[ 4875.244168] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.PRT4._GTF, AE_NOT_FOUND (20170831/psparse-550)
[ 4875.304211] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[ 4875.304236] No Local Variables are initialized for Method [_GTF]
[ 4875.304239] No Arguments are initialized for method [_GTF]
[ 4875.304244] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.PRT4._GTF, AE_NOT_FOUND (20170831/psparse-550)
[ 4875.339913] ata5.00: configured for UDMA/133
[ 4876.126217] ata3: link is slow to respond, please be patient (ready=0)
[ 4876.126228] ata2: link is slow to respond, please be patient (ready=0)
[ 4876.130102] ata6: link is slow to respond, please be patient (ready=0)
[ 4876.134117] ata4: link is slow to respond, please be patient (ready=0)
[ 4877.026151] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4877.027460] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[ 4877.027484] No Local Variables are initialized for Method [_GTF]
[ 4877.027487] No Arguments are initialized for method [_GTF]
[ 4877.027492] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.PRT2._GTF, AE_NOT_FOUND (20170831/psparse-550)
[ 4877.029125] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[ 4877.029149] No Local Variables are initialized for Method [_GTF]
[ 4877.029153] No Arguments are initialized for method [_GTF]
[ 4877.029157] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.PRT2._GTF, AE_NOT_FOUND (20170831/psparse-550)
[ 4877.029361] ata3.00: configured for UDMA/133
[ 4877.090174] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4877.091493] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[ 4877.091517] No Local Variables are initialized for Method [_GTF]
[ 4877.091521] No Arguments are initialized for method [_GTF]
[ 4877.091525] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.PRT5._GTF, AE_NOT_FOUND (20170831/psparse-550)
[ 4877.093248] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[ 4877.093273] No Local Variables are initialized for Method [_GTF]
[ 4877.093277] No Arguments are initialized for method [_GTF]
[ 4877.093281] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.PRT5._GTF, AE_NOT_FOUND (20170831/psparse-550)
[ 4877.093482] ata6.00: configured for UDMA/133
[ 4877.146179] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4877.147010] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[ 4877.147034] No Local Variables are initialized for Method [_GTF]
[ 4877.147038] No Arguments are initialized for method [_GTF]
[ 4877.147042] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.PRT1._GTF, AE_NOT_FOUND (20170831/psparse-550)
[ 4877.148610] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[ 4877.148634] No Local Variables are initialized for Method [_GTF]
[ 4877.148638] No Arguments are initialized for method [_GTF]
[ 4877.148642] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.PRT1._GTF, AE_NOT_FOUND (20170831/psparse-550)
[ 4877.148994] ata2.00: configured for UDMA/133
[ 4877.338178] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4877.339019] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[ 4877.339044] No Local Variables are initialized for Method [_GTF]
[ 4877.339047] No Arguments are initialized for method [_GTF]
[ 4877.339052] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.PRT3._GTF, AE_NOT_FOUND (20170831/psparse-550)
[ 4877.340565] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[ 4877.340590] No Local Variables are initialized for Method [_GTF]
[ 4877.340593] No Arguments are initialized for method [_GTF]
[ 4877.340598] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.PRT3._GTF, AE_NOT_FOUND (20170831/psparse-550)
[ 4877.340946] ata4.00: configured for UDMA/133
[ 4877.602338] e1000e: enp0s31f6 NIC Link is Down
[ 4877.607996] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
[ 4877.806512] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
[ 4881.222300] e1000e: enp0s31f6 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 4881.222311] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO
[ 4881.222396] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready
[ 4932.572658] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 5057.572895] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 5182.569046] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 5307.573361] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 5432.573446] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 5557.569663] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 5682.565675] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 5807.561898] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 5932.557908] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 6057.554074] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 6182.550248] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 6307.546415] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 6432.546512] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 6557.546501] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 6682.550633] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 6807.550859] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 6932.550944] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 7057.547044] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 7182.543169] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 7209.628502] audit: type=1400 audit(1582385705.874:31): apparmor="DENIED" operation="open" profile="/usr/bin/freshclam" name="/etc/ssl/openssl.cnf" pid=1496 comm="freshclam" requested_mask="r" denied_mask="r" fsuid=123 ouid=0
[ 7307.535283] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 7432.527438] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 7557.519402] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 7682.511620] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 7807.503587] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 7932.499879] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 8057.491815] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 8182.487968] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 8306.060363] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 8307.480164] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 8432.472170] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 8557.464310] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 8682.456489] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 8807.448645] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 8932.440652] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 9057.432742] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 9182.425005] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 9307.416976] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 9432.409254] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 9557.401323] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 9682.393357] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 9767.632507] PM: suspend entry (deep)
[ 9767.632509] PM: Syncing filesystems ... done.
[ 9767.643674] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 9767.646007] OOM killer disabled.
[ 9767.646009] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 9767.647328] Suspending console(s) (use no_console_suspend to debug)
[ 9767.657512] serial 00:03: disabled
[ 9767.658198] parport_pc 00:01: disabled
[ 9767.658580] e1000e: EEE TX LPI TIMER: 00000011
[ 9767.665271] sd 3:0:0:0: [sdc] Synchronizing SCSI cache
[ 9767.665324] sd 4:0:0:0: [sdd] Synchronizing SCSI cache
[ 9767.665325] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[ 9767.665329] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[ 9767.665361] sd 5:0:0:0: [sde] Synchronizing SCSI cache
[ 9767.665514] sd 3:0:0:0: [sdc] Stopping disk
[ 9767.665521] sd 1:0:0:0: [sda] Stopping disk
[ 9767.665563] sd 4:0:0:0: [sdd] Stopping disk
[ 9767.665565] sd 5:0:0:0: [sde] Stopping disk
[ 9767.669595] sd 2:0:0:0: [sdb] Stopping disk
[ 9768.437918] ACPI: Preparing to enter system sleep state S3
[ 9768.440479] PM: Saving platform NVS memory
[ 9768.440577] Disabling non-boot CPUs ...
[ 9768.454705] smpboot: CPU 1 is now offline
[ 9768.478080] IRQ 134: no longer affine to CPU2
[ 9768.479096] smpboot: CPU 2 is now offline
[ 9768.501538] IRQ 123: no longer affine to CPU3
[ 9768.501545] IRQ 126: no longer affine to CPU3
[ 9768.501549] IRQ 127: no longer affine to CPU3
[ 9768.502566] smpboot: CPU 3 is now offline
[ 9768.505606] ACPI: Low-level resume complete
[ 9768.505694] PM: Restoring platform NVS memory
[ 9768.507532] Enabling non-boot CPUs ...
[ 9768.507573] x86: Booting SMP configuration:
[ 9768.507573] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 9768.507797] microcode: sig=0x906e9, pf=0x2, revision=0x42
[ 9768.508943]  cache: parent cpu1 should not be sleeping
[ 9768.509064] CPU1 is up
[ 9768.509084] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 9768.509336] microcode: sig=0x906e9, pf=0x2, revision=0xca
[ 9768.509420]  cache: parent cpu2 should not be sleeping
[ 9768.509738] CPU2 is up
[ 9768.509759] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 9768.510074]  cache: parent cpu3 should not be sleeping
[ 9768.510207] CPU3 is up
[ 9768.512644] ACPI: Waking up from system sleep state S3
[ 9768.562758] sd 1:0:0:0: [sda] Starting disk
[ 9768.562771] sd 2:0:0:0: [sdb] Starting disk
[ 9768.562777] sd 3:0:0:0: [sdc] Starting disk
[ 9768.562782] sd 4:0:0:0: [sdd] Starting disk
[ 9768.562804] sd 5:0:0:0: [sde] Starting disk
[ 9768.568522] parport_pc 00:01: activated
[ 9768.571223] serial 00:03: activated
[ 9768.571377] rtc_cmos 00:06: Alarms can be up to one month in the future
[ 9768.938828] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 9768.944982] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[ 9768.945000] No Local Variables are initialized for Method [_GTF]
[ 9768.945004] No Arguments are initialized for method [_GTF]
[ 9768.945008] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.PRT0._GTF, AE_NOT_FOUND (20170831/psparse-550)
[ 9768.956667] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[ 9768.956687] No Local Variables are initialized for Method [_GTF]
[ 9768.956691] No Arguments are initialized for method [_GTF]
[ 9768.956696] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.PRT0._GTF, AE_NOT_FOUND (20170831/psparse-550)
[ 9768.956723] ata1.00: configured for UDMA/133
[ 9769.006147] acpi LNXPOWER:16: Turning OFF
[ 9769.006389] acpi LNXPOWER:15: Turning OFF
[ 9769.006624] acpi LNXPOWER:14: Turning OFF
[ 9769.006859] acpi LNXPOWER:13: Turning OFF
[ 9769.007089] acpi LNXPOWER:12: Turning OFF
[ 9769.007318] acpi LNXPOWER:11: Turning OFF
[ 9769.007548] acpi LNXPOWER:10: Turning OFF
[ 9769.007780] acpi LNXPOWER:0f: Turning OFF
[ 9769.008044] acpi LNXPOWER:0e: Turning OFF
[ 9769.008279] acpi LNXPOWER:0d: Turning OFF
[ 9769.008592] acpi LNXPOWER:0c: Turning OFF
[ 9769.008838] acpi LNXPOWER:0b: Turning OFF
[ 9769.009068] acpi LNXPOWER:0a: Turning OFF
[ 9769.009299] acpi LNXPOWER:09: Turning OFF
[ 9769.009531] acpi LNXPOWER:08: Turning OFF
[ 9769.009762] acpi LNXPOWER:07: Turning OFF
[ 9769.009993] acpi LNXPOWER:06: Turning OFF
[ 9769.010223] acpi LNXPOWER:05: Turning OFF
[ 9769.010453] acpi LNXPOWER:04: Turning OFF
[ 9769.010718] acpi LNXPOWER:03: Turning OFF
[ 9769.010893] OOM killer enabled.
[ 9769.010895] Restarting tasks ...
[ 9769.011701] pci_bus 0000:05: Allocating resources
[ 9769.011737] pci 0000:04:00.0: bridge window [io  0x1000-0x0fff] to [bus 05] add_size 1000
[ 9769.011748] pci 0000:04:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000 add_align 100000
[ 9769.011764] pci 0000:04:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 9769.011771] pci 0000:04:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 9769.011777] pci 0000:04:00.0: BAR 13: no space for [io  size 0x1000]
[ 9769.011783] pci 0000:04:00.0: BAR 13: failed to assign [io  size 0x1000]
[ 9769.011792] pci 0000:04:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 9769.011798] pci 0000:04:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 9769.011804] pci 0000:04:00.0: BAR 13: no space for [io  size 0x1000]
[ 9769.011810] pci 0000:04:00.0: BAR 13: failed to assign [io  size 0x1000]
[ 9769.025310] done.
[ 9769.026529] video LNXVIDEO:00: Restoring backlight state
[ 9769.026536] PM: suspend exit
[ 9769.034852] [drm] RC6 on
[ 9769.124623] firewire_core 0000:05:00.0: rediscovered device fw0
[ 9769.180585] usb 1-6: new full-speed USB device number 19 using xhci_hcd
[ 9769.308603] usb 1-6: device descriptor read/64, error -71
[ 9769.544742] usb 1-6: device descriptor read/64, error -71
[ 9769.780571] usb 1-6: new full-speed USB device number 20 using xhci_hcd
[ 9769.908619] usb 1-6: device descriptor read/64, error -71
[ 9770.144527] usb 1-6: device descriptor read/64, error -71
[ 9770.252593] usb usb1-port6: attempt power cycle
[ 9770.904539] usb 1-6: new full-speed USB device number 21 using xhci_hcd
[ 9770.904723] usb 1-6: Device not responding to setup address.
[ 9771.016381] e1000e: enp0s31f6 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 9771.016388] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO
[ 9771.112690] usb 1-6: Device not responding to setup address.
[ 9771.320536] usb 1-6: device not accepting address 21, error -71
[ 9771.448523] usb 1-6: new full-speed USB device number 22 using xhci_hcd
[ 9771.448677] usb 1-6: Device not responding to setup address.
[ 9771.656717] usb 1-6: Device not responding to setup address.
[ 9771.864690] usb 1-6: device not accepting address 22, error -71
[ 9771.864771] usb usb1-port6: unable to enumerate USB device
[ 9773.204663] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 9773.226371] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[ 9773.226396] No Local Variables are initialized for Method [_GTF]
[ 9773.226399] No Arguments are initialized for method [_GTF]
[ 9773.226404] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.PRT4._GTF, AE_NOT_FOUND (20170831/psparse-550)
[ 9773.286725] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[ 9773.286750] No Local Variables are initialized for Method [_GTF]
[ 9773.286754] No Arguments are initialized for method [_GTF]
[ 9773.286758] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.PRT4._GTF, AE_NOT_FOUND (20170831/psparse-550)
[ 9773.322606] ata5.00: configured for UDMA/133
[ 9773.988611] ata3: link is slow to respond, please be patient (ready=0)
[ 9773.988622] ata2: link is slow to respond, please be patient (ready=0)
[ 9773.988637] ata6: link is slow to respond, please be patient (ready=0)
[ 9773.996533] ata4: link is slow to respond, please be patient (ready=0)
[ 9774.888675] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 9774.894038] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[ 9774.894063] No Local Variables are initialized for Method [_GTF]
[ 9774.894066] No Arguments are initialized for method [_GTF]
[ 9774.894071] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.PRT2._GTF, AE_NOT_FOUND (20170831/psparse-550)
[ 9774.895767] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[ 9774.895790] No Local Variables are initialized for Method [_GTF]
[ 9774.895794] No Arguments are initialized for method [_GTF]
[ 9774.895798] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.PRT2._GTF, AE_NOT_FOUND (20170831/psparse-550)
[ 9774.895995] ata3.00: configured for UDMA/133
[ 9774.948541] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 9774.949788] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[ 9774.949813] No Local Variables are initialized for Method [_GTF]
[ 9774.949816] No Arguments are initialized for method [_GTF]
[ 9774.949821] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.PRT5._GTF, AE_NOT_FOUND (20170831/psparse-550)
[ 9774.951559] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[ 9774.951583] No Local Variables are initialized for Method [_GTF]
[ 9774.951587] No Arguments are initialized for method [_GTF]
[ 9774.951591] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.PRT5._GTF, AE_NOT_FOUND (20170831/psparse-550)
[ 9774.951797] ata6.00: configured for UDMA/133
[ 9775.068628] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 9775.069472] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[ 9775.069497] No Local Variables are initialized for Method [_GTF]
[ 9775.069500] No Arguments are initialized for method [_GTF]
[ 9775.069505] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.PRT1._GTF, AE_NOT_FOUND (20170831/psparse-550)
[ 9775.070897] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[ 9775.070921] No Local Variables are initialized for Method [_GTF]
[ 9775.070925] No Arguments are initialized for method [_GTF]
[ 9775.070930] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.PRT1._GTF, AE_NOT_FOUND (20170831/psparse-550)
[ 9775.071280] ata2.00: configured for UDMA/133
[ 9775.196634] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 9775.197484] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[ 9775.197509] No Local Variables are initialized for Method [_GTF]
[ 9775.197513] No Arguments are initialized for method [_GTF]
[ 9775.197517] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.PRT3._GTF, AE_NOT_FOUND (20170831/psparse-550)
[ 9775.198960] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[ 9775.198984] No Local Variables are initialized for Method [_GTF]
[ 9775.198987] No Arguments are initialized for method [_GTF]
[ 9775.198992] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.PRT3._GTF, AE_NOT_FOUND (20170831/psparse-550)
[ 9775.199337] ata4.00: configured for UDMA/133
[ 9775.412635] e1000e: enp0s31f6 NIC Link is Down
[ 9775.418239] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
[ 9775.616958] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
[ 9779.080796] e1000e: enp0s31f6 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 9779.080803] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO
[ 9779.080888] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready
[ 9813.024743] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 9937.993023] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[10062.961197] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[10187.929363] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[10312.897429] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[10437.865542] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[10562.833628] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[10687.801732] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[10812.769754] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[10938.245710] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[11063.213923] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[11188.181935] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[11313.149881] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[11438.094085] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[11563.086091] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[11688.078127] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[11813.070036] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[11938.062243] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[12063.054268] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[12188.046220] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[12313.038382] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[12438.030444] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[12563.022429] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[12688.014355] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[12813.006409] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[12912.585168]  sdb: sdb1 sdb2
[12912.589295]  sdc: sdc1 sdc2
[12912.619966]  sde: sde1 sde4
[12937.998581] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[13062.990655] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[13187.982632] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[13312.974685] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[13437.966614] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[13562.958589] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[13687.950785] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[13812.942836] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[13937.934896] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[14062.926795] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[14187.918961] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[14312.910921] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[14437.903101] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[14562.894952] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[14687.886987] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[14812.879183] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[14937.871186] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[14997.230937] audit: type=1400 audit(1582407238.343:32): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/drirc.d/00-mesa-defaults.conf" pid=18446 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[14997.234209] audit: type=1400 audit(1582407238.347:33): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/drirc.d/00-mesa-defaults.conf" pid=18446 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[14997.240570] audit: type=1400 audit(1582407238.355:34): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/drirc.d/00-mesa-defaults.conf" pid=18446 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[14997.241555] audit: type=1400 audit(1582407238.355:35): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/drirc.d/00-mesa-defaults.conf" pid=18446 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[14997.249859] audit: type=1400 audit(1582407238.363:36): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/jozef/.cache/mesa_shader_cache/index" pid=18446 comm="soffice.bin" requested_mask="wrc" denied_mask="wrc" fsuid=1000 ouid=1000
[14997.250858] audit: type=1400 audit(1582407238.363:37): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/drirc.d/00-mesa-defaults.conf" pid=18446 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[14997.690856] audit: type=1400 audit(1582407238.803:38): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/drirc.d/00-mesa-defaults.conf" pid=18457 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[14997.691627] audit: type=1400 audit(1582407238.807:39): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/drirc.d/00-mesa-defaults.conf" pid=18457 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[14997.693196] audit: type=1400 audit(1582407238.807:40): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/drirc.d/00-mesa-defaults.conf" pid=18457 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[14997.693517] audit: type=1400 audit(1582407238.807:41): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/drirc.d/00-mesa-defaults.conf" pid=18457 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[15044.328357] kauditd_printk_skb: 2 callbacks suppressed
[15044.328359] audit: type=1400 audit(1582407285.444:44): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/jozef/.gtkrc-xfce" pid=18456 comm="pool" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[15044.328417] audit: type=1400 audit(1582407285.444:45): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/jozef/.gtkrc-xfce" pid=18456 comm="pool" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[15044.329101] audit: type=1400 audit(1582407285.444:46): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/jozef/.xsession-errors" pid=18456 comm="pool" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[15044.329549] audit: type=1400 audit(1582407285.444:47): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/jozef/.xsession-errors" pid=18456 comm="pool" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[15062.863118] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[15070.093654] audit: type=1400 audit(1582407311.208:48): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name=2F686F6D652F6A6F7A65662F50756C7069742F626965C5BCC485637920323031382D30362D3038202C2C2C2C pid=18456 comm="pool" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[15070.094624] audit: type=1400 audit(1582407311.212:49): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name=2F686F6D652F6A6F7A65662F50756C7069742F626965C5BCC485637920323031382D30362D3038202C2C2C2C pid=18456 comm="pool" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[15073.948321] audit: type=1400 audit(1582407315.064:50): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name=2F686F6D652F6A6F7A65662F50756C7069742F4AC48564726F5F6D696E74612F4B4F4459204D696E742D61 pid=18456 comm="pool" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[15073.948881] audit: type=1400 audit(1582407315.064:51): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name=2F686F6D652F6A6F7A65662F50756C7069742F4AC48564726F5F6D696E74612F4B4F4459204D696E742D61 pid=18456 comm="pool" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[15073.949197] audit: type=1400 audit(1582407315.064:52): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name=2F686F6D652F6A6F7A65662F50756C7069742F4AC48564726F5F6D696E74612F416C65206D6961C582656D206261C5826167616E pid=18456 comm="pool" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[15073.949977] audit: type=1400 audit(1582407315.064:53): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name=2F686F6D652F6A6F7A65662F50756C7069742F4AC48564726F5F6D696E74612F416C65206D6961C582656D206261C5826167616E pid=18456 comm="pool" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[15187.855331] [UFW BLOCK] IN=enp0s31f6 OUT= MAC=01:00:5e:00:00:01:b0:be:76:5f:db:4c:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
root@...............#

Dodano po pewnym czasie:
Menedżer aktualizacji podaje, że aktualnie używam jądra 4.15.0-88-generic (wspierane do kwietnia 2023).
Menedżer jednak nie podaje, które jądro jest zalecane. Drukarki brother ze skanerem na razie nie kontaktują. Nie wiem, który program służy do przechwytywania strumienia  MiniDV  przez "fire wire". Program "Kino Video Editor" dla sys. 64 bit gdzieś się stracił. W którąś stronę trzeba by iść. Kto szedł jakąś drogą? Przyznaję, że narzędzia do diagnostyki opisane na forum wyglądają na potężne. Potrzebna jest jednak praktyka i wiedza jak powinno być.
Angel

Dodano po pewnym czasie:
Program "Kino Video Editor" dla sys. 64 bit zainstalowany z  Kino

Dodano po pewnym czasie:
Bardzo fajnie. Wszystko już mam. Jeszcze tylko jeden drobiazg, żeby zadziałało, bo chyba nie działa. Tego też nie mam prawa być pewien, jako Miętowa świeżynka.
Odpowiedz
#10
0
Kod:
root@........# lsmod
Module                  Size  Used by
pci_stub              16384  1
vboxpci                24576  0
vboxnetadp            28672  0
vboxnetflt            28672  0
vboxdrv              471040  3 vboxpci,vboxnetadp,vboxnetflt
usblp                  20480  0
intel_rapl            20480  0
x86_pkg_temp_thermal    16384  0
intel_powerclamp      16384  0
coretemp              16384  0
kvm_intel            217088  0
kvm                  610304  1 kvm_intel
irqbypass              16384  1 kvm
snd_usb_audio        204800  1
crct10dif_pclmul      16384  0
crc32_pclmul          16384  0
ghash_clmulni_intel    16384  0
snd_hda_codec_hdmi    49152  1
snd_usbmidi_lib        32768  1 snd_usb_audio
pcbc                  16384  0
snd_hda_codec_realtek  106496  1
snd_hda_codec_generic    73728  1 snd_hda_codec_realtek
snd_seq_midi          16384  0
snd_seq_midi_event    16384  1 snd_seq_midi
snd_hda_intel          45056  5
snd_hda_codec        126976  4 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec_realtek
aesni_intel          188416  0
aes_x86_64            20480  1 aesni_intel
crypto_simd            16384  1 aesni_intel
glue_helper            16384  1 aesni_intel
cryptd                24576  3 crypto_simd,ghash_clmulni_intel,aesni_intel
intel_cstate          20480  0
snd_hda_core          81920  5 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek
intel_rapl_perf        16384  0
snd_rawmidi            32768  2 snd_seq_midi,snd_usbmidi_lib
snd_hwdep              20480  2 snd_usb_audio,snd_hda_codec
ip6t_REJECT            16384  1
nf_reject_ipv6        16384  1 ip6t_REJECT
serio_raw              16384  0
snd_pcm                98304  6 snd_hda_codec_hdmi,snd_hda_intel,snd_usb_audio,snd_hda_codec,snd_hda_core
snd_seq                65536  2 snd_seq_midi,snd_seq_midi_event
nf_log_ipv6            16384  5
snd_seq_device        16384  3 snd_seq,snd_seq_midi,snd_rawmidi
snd_timer              32768  2 snd_seq,snd_pcm
xt_hl                  16384  22
ip6t_rt                16384  3
joydev                24576  0
input_leds            16384  0
uvcvideo              86016  0
snd                    81920  24 snd_hda_codec_generic,snd_seq,snd_seq_device,snd_hda_codec_hdmi,snd_hwdep,snd_hda_intel,snd_usb_audio,snd_usbmidi_lib,snd_hda_codec,snd_hda_codec_realtek,snd_timer,snd_pcm,snd_rawmidi
videobuf2_vmalloc      16384  1 uvcvideo
videobuf2_memops      16384  1 videobuf2_vmalloc
videobuf2_v4l2        24576  1 uvcvideo
soundcore              16384  1 snd
videobuf2_core        40960  2 videobuf2_v4l2,uvcvideo
videodev              184320  3 videobuf2_core,videobuf2_v4l2,uvcvideo
media                  40960  2 videodev,uvcvideo
mei_me                40960  0
mei                    94208  1 mei_me
shpchp                36864  0
nf_conntrack_ipv6      20480  8
nf_defrag_ipv6        20480  1 nf_conntrack_ipv6
ipt_REJECT            16384  1
nf_reject_ipv4        16384  1 ipt_REJECT
nf_log_ipv4            16384  5
nf_log_common          16384  2 nf_log_ipv4,nf_log_ipv6
xt_LOG                16384  10
xt_limit              16384  13
xt_tcpudp              16384  18
xt_addrtype            16384  4
mac_hid                16384  0
acpi_pad              180224  0
sch_fq_codel          20480  2
nf_conntrack_ipv4      16384  8
nf_defrag_ipv4        16384  1 nf_conntrack_ipv4
xt_conntrack          16384  16
ip6table_filter        16384  1
ip6_tables            28672  53 ip6table_filter
nf_conntrack_netbios_ns    16384  0
nf_conntrack_broadcast    16384  1 nf_conntrack_netbios_ns
nf_nat_ftp            16384  0
nf_nat                32768  1 nf_nat_ftp
nf_conntrack_ftp      20480  1 nf_nat_ftp
nf_conntrack          131072  8 xt_conntrack,nf_conntrack_ipv6,nf_conntrack_ipv4,nf_nat,nf_nat_ftp,nf_conntrack_netbios_ns,nf_conntrack_broadcast,nf_conntrack_ftp
libcrc32c              16384  2 nf_conntrack,nf_nat
parport_pc            32768  1
ppdev                  20480  0
lp                    20480  0
parport                49152  3 parport_pc,lp,ppdev
iptable_filter        16384  1
ip_tables              28672  9 iptable_filter
x_tables              40960  13 ip6table_filter,xt_conntrack,iptable_filter,xt_LOG,xt_tcpudp,xt_addrtype,ip6t_rt,ip6_tables,ipt_REJECT,ip_tables,xt_limit,xt_hl,ip6t_REJECT
autofs4                40960  2
btrfs                1138688  0
xor                    24576  1 btrfs
zstd_compress        163840  1 btrfs
raid6_pq              114688  1 btrfs
dm_mirror              24576  0
dm_region_hash        20480  1 dm_mirror
dm_log                20480  2 dm_region_hash,dm_mirror
hid_generic            16384  0
usbhid                53248  0
hid                  114688  2 usbhid,hid_generic
uas                    24576  0
usb_storage            69632  2 uas
i915                1622016  9
i2c_algo_bit          16384  1 i915
drm_kms_helper        172032  1 i915
syscopyarea            16384  1 drm_kms_helper
sysfillrect            16384  1 drm_kms_helper
sysimgblt              16384  1 drm_kms_helper
e1000e                249856  0
fb_sys_fops            16384  1 drm_kms_helper
ptp                    20480  1 e1000e
psmouse              151552  0
ahci                  40960  1
pps_core              20480  1 ptp
firewire_ohci          40960  0
libahci                32768  1 ahci
drm                  401408  5 drm_kms_helper,i915
nvme                  36864  0
firewire_core          65536  1 firewire_ohci
crc_itu_t              16384  1 firewire_core
nvme_core              61440  3 nvme
wmi                    24576  0
video                  45056  1 i915
root@............#

Dodano po pewnym czasie:
I co by tu dalej ???

Dodano po pewnym czasie:
Mam nadzieję, że z powodu koronowego wirusa Moderatorzy, w których nasza Nadzieja, nie wymrą i zechcą mieć jeszcze jakieś pomysły. W końcu bity i bajty, to nie kury i jak wyzdychają nic się nie stanie, bęðą nowe.

Dodano po pewnym czasie:
Kod:
~$ sudo kino
[sudo] hasło użytkownika ....:
> help language code en
> Kino Common being built
> Creating page editor
> Creating Capture Page
> Creating Export Page
> Creating Export1394 Page
> Creating ExportAVI Page
> Creating ExportStills Page
> Creating ExportAudio Page
> Creating ExportMJPEG Page
/usr/share/kino/scripts/dvdauthor/growisofs.sh
/usr/share/kino/scripts/dvdauthor/dvdauthor.sh
/usr/share/kino/scripts/dvdauthor/none.sh
/usr/share/kino/scripts/dvdauthor/dvdauthor-brasero.sh
/usr/share/kino/scripts/dvdauthor/qdvdauthor.sh
/usr/share/kino/scripts/dvdauthor/dvdauthor-k3b.sh
> Initializing MJPEG Export Page settings from Preferences
> Creating ExportPipe Page
/usr/share/kino/scripts/exports/gstreamer_utils.sh
/usr/share/kino/scripts/exports/ffmpeg_mp3.sh
/usr/share/kino/scripts/exports/mencoder.sh
/usr/share/kino/scripts/exports/ffmpeg_dvd_dual.sh
/usr/share/kino/scripts/exports/ffmpeg_vcd.sh
/usr/share/kino/scripts/exports/ffmpeg_h264_dual.sh
/usr/share/kino/scripts/exports/gstreamer_theora.sh
/usr/share/kino/scripts/exports/ffmpeg_divx.sh
/usr/share/kino/scripts/exports/ffmpeg_dvd.sh
/usr/share/kino/scripts/exports/ffmpeg_divx_dual.sh
/usr/share/kino/scripts/exports/ffmpeg_flv.sh
/usr/share/kino/scripts/exports/ffmpeg_xvid.sh
/usr/share/kino/scripts/exports/ffmpeg_3gp.sh
/usr/share/kino/scripts/exports/extract_chapters
/usr/share/kino/scripts/exports/ffmpeg2dirac.sh
/usr/share/kino/scripts/exports/ffmpeg_mp4_dual.sh
/usr/share/kino/scripts/exports/ffmpeg_mov.sh
/usr/share/kino/scripts/exports/ffmpeg2theora.sh
/usr/share/kino/scripts/exports/ffmpeg_h264.sh
/usr/share/kino/scripts/exports/ffmpeg_mp4.sh
/usr/share/kino/scripts/exports/ffmpeg_h264_ps3.sh
/usr/share/kino/scripts/exports/ffmpeg_huffyuv.sh
/usr/share/kino/scripts/exports/rawplay.sh
/usr/share/kino/scripts/exports/ffmpeg_utils.sh
/usr/share/kino/scripts/exports/ffmpeg_xvid_dual.sh
> Creating page trim
>>> Image Create: Colour Range
>>> Image Create: Fixed Colour
>>> Image Create: From File
>>> Image Create: Gradient
>>> Image Create: Random noise
>>> Image Filter: No Change
>>> Image Filter: Black & White
>>> Image Filter: Kaleidoscope
>>> Image Filter: Fade In
>>> Image Filter: Fade Out
>>> Image Filter: Flip
>>> Image Filter: Mirror
>>> Image Filter: Reverse Video
>>> Image Filter: Sepia
>>> Image Transition: Dissolve
>>> Image Transition: Barn Door Wipe
>>> Image Transition: Differences
>>> Image Transition: No Change
>>> Image Transition: Push Wipe
>>> Image Transition: Switch
>>> Audio Filter: No Change
>>> Audio Filter: Dub
>>> Audio Filter: Fade In
>>> Audio Filter: Fade Out
>>> Audio Filter: Gain
>>> Audio Filter: Mix
>>> Audio Filter: Silence
>>> Audio Transition: Cross Fade
>>> Audio Transition: No Change
> Creating Magick Page
>> Searching /usr/lib/kino-gtk2 for plugins
>>> Registering plugin /usr/lib/kino-gtk2/libtimfx.so
>>> Registering plugin /usr/lib/kino-gtk2/libdvtitler.so
>>> Registering plugin /usr/lib/kino-gtk2/libkinoplus.so
>>> Image Filter: Blur
>>> Image Filter: Colour Hold
>>> Image Filter: Soft Focus
>>> Image Transition: Luma Wipe
>>> Image Filter: Superimpose
>>> Image Filter: Titler
>>> Image Filter: Colour Average
>>> Image Filter: Charcoal
>>> Image Filter: Jerky
>>> Image Filter: Levels
>>> Image Filter: Pan and Zoom
>>> Image Filter: Pixelate
>>> Image Transition: Composite
>>> Image Transition: Blue Chroma Key
>>> Image Transition: Green Chroma Key
>> Creating undo/redo buffer
>> Starting Editor
>> Kino Common newFile
>>> Received playlist to store at position 0
>>>> Adding to end
>> Leaving Editor
>> Left Editor
>> Starting Capture
>> AV/C Enabled
>>> Using iec61883 capture
>>> iec61883Reader::StartThread on port 0
>> Constructing File Capture tracker
>> AV/C Enabled
>> AV/C Enabled
>> Leaving Capture
>> Starting Capture
>>> Using iec61883 capture
>>> iec61883Reader::StartThread on port 0
>> Leaving Capture
>> Starting Capture
>>> Using iec61883 capture
>>> iec61883Reader::StartThread on port 0
>> Kino Common newFile
>> Leaving Capture
>> Starting Editor
>>> Received playlist to store at position 0
>>>> Adding to end
Exiting Kino
...............~$
W sieci pisało, żeby program "KINO" uruchomić z roota w terminalu. W dalszym ciągu na zakładce KINO IEEE1394 nie pojawiają się informacje z działającej kamerki w trybie odtwarzania.
Odpowiedz


Skocz do:




Użytkownicy przeglądający ten wątek: 1 gości