Ocena wątku:
  • 0 głosów - średnia: 0
  • 1
  • 2
  • 3
  • 4
  • 5
Rozwiązane Bluetooth nie działa.
#1
0
Witam i pozdrawiam.
Zainstalowałem Minta na laptopie HP 15-da1027nw.
Wszystko chodzi dobrze poza bluetooth.Gdy otwieram okienko z bt to przełącznika nie da się włączyć,obok na znaczku bt jest czerwony krzyżyk.
Próbowałem włączać różne dystrybucje linukxa z live i też nie działa.Użyłem polecenia:
Kod:
sudo service bluetooth start
Kod:
● bluetooth.service - Bluetooth service
    Loaded: loaded (/lib/systemd/system/bluetooth.service; enabled; vendor preset: enabled)
    Active: active (running) since Sun 2022-07-17 16:47:31 CEST; 59min ago
      Docs: man:bluetoothd(8)
  Main PID: 6650 (bluetoothd)
    Status: "Running"
      Tasks: 1 (limit: 9301)
    Memory: 2.7M
    CGroup: /system.slice/bluetooth.service
            └─6650 /usr/lib/bluetooth/bluetoothd
Ale nie mogę dalej włączyć bt więc pobrałem Blueman i też nic.Niby jest a nie ma.
Podaję wynik kodu:
Kod:
inxi -Fxz
*Dedito. Co to wyżej ma wspólnego z PHP? Poprawiam.
Kod:
System:    Kernel: 5.4.0-122-generic x86_64 bits: 64 compiler: gcc v: 9.4.0 Desktop: MATE 1.26.0
          Distro: Linux Mint 20.3 Una base: Ubuntu 20.04 focal
Machine:  Type: Laptop System: HP product: HP Laptop 15-da1xxx v: Type1ProductConfigId
          serial: <filter>
          Mobo: HP model: 8532 v: 70.29 serial: <filter> UEFI: Insyde v: F.18 date: 03/15/2019
Battery:  ID-1: BAT1 charge: 34.5 Wh condition: 34.9/41.9 Wh (83%)
          model: Hewlett-Packard PABAS0241231 status: Discharging
CPU:      Topology: Quad Core model: Intel Core i5-8265U bits: 64 type: MT MCP arch: Kaby Lake
          rev: C L2 cache: 6144 KiB
          flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 28800
          Speed: 600 MHz min/max: 400/3900 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 5: 600
          6: 600 7: 600 8: 600
Graphics:  Device-1: Intel UHD Graphics 620 vendor: Hewlett-Packard driver: i915 v: kernel
          bus ID: 00:02.0
          Display: x11 server: X.Org 1.20.13 driver: modesetting unloaded: fbdev,vesa
          resolution: 1920x1080~60Hz
          OpenGL: renderer: Mesa Intel UHD Graphics 620 (WHL GT2) v: 4.6 Mesa 21.2.6
          direct render: Yes
Audio:    Device-1: Intel Cannon Point-LP High Definition Audio vendor: Hewlett-Packard
          driver: snd_hda_intel v: kernel bus ID: 00:1f.3
          Sound Server: ALSA v: k5.4.0-122-generic
Network:  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Hewlett-Packard
          driver: r8169 v: kernel port: 4000 bus ID: 01:00.0
          IF: eno1 state: down mac: <filter>
          Device-2: Realtek RTL8822BE 802.11a/b/g/n/ac WiFi adapter vendor: Hewlett-Packard
          driver: rtw_pci v: N/A port: 3000 bus ID: 02:00.0
          IF: wlo1 state: up mac: <filter>
          IF-ID-1: vmnet1 state: unknown speed: N/A duplex: N/A mac: <filter>
          IF-ID-2: vmnet8 state: unknown speed: N/A duplex: N/A mac: <filter>
Drives:    Local Storage: total: 238.47 GiB used: 73.69 GiB (30.9%)
          ID-1: /dev/nvme0n1 vendor: Toshiba model: N/A size: 238.47 GiB
RAID:      Hardware-1: Intel 82801 Mobile SATA Controller [RAID mode] driver: ahci v: 3.0
          bus ID: 00:17.0
Partition: ID-1: / size: 72.78 GiB used: 13.70 GiB (18.8%) fs: ext4 dev: /dev/nvme0n1p2
          ID-2: /home size: 159.79 GiB used: 59.99 GiB (37.5%) fs: ext4 dev: /dev/nvme0n1p3
Sensors:  System Temperatures: cpu: 35.0 C mobo: 29.8 C
          Fan Speeds (RPM): N/A
Info:      Processes: 302 Uptime: 2h 40m Memory: 7.66 GiB used: 1.94 GiB (25.4%) Init: systemd
          runlevel: 5 Compilers: gcc: 9.4.0 Shell: zsh v: 5.8 inxi: 3.0.38
Proszę o wskazówki co mogę zrobić za co z góry dziękuję.
#2
0
Pokaż wynik sudo rfkill list all.
#3
0
Kod:
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
#4
0
Pokaż wyniki lsusb oraz dmesg
Poniważ dmesg daje sporo danych skorzystaj z pastebin.
#5
0
#6
0
Kod:
lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 05c8:03d2 Cheng Uei Precision Industry Co., Ltd (Foxlink) HP TrueVision HD Camera
Bus 001 Device 002: ID 046d:c534 Logitech, Inc. Unifying Receiver
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Dodano po pewnym czasie:
Link do Pastebin:
https://pastebin.com/nq6RyJpR

Dodano po pewnym czasie:
USB boot wyłączyłem i dalej nie łapie bt.

Dodano po pewnym czasie:
secureboot  mam wyłączony
#7
0
Nie widać tego BT, ani w dmesg ani w lsusb
Pokaż jeszcze lspci -k
Być może trzeba będzie nowszy kernel załadować, być może wsparcie jest dopiero w nowszych.

Ewentualnie jak nie chcesz zmieniać kernela to skorzystaj z tego https://github.com/lwfinger/rtw88
#8
0
Kod:
00:00.0 Host bridge: Intel Corporation Coffee Lake HOST and DRAM Controller (rev 0c)
Subsystem: Hewlett-Packard Company Coffee Lake HOST and DRAM Controller
Kernel driver in use: skl_uncore
00:02.0 VGA compatible controller: Intel Corporation UHD Graphics 620 (Whiskey Lake) (rev 02)
Subsystem: Hewlett-Packard Company UHD Graphics 620 (Whiskey Lake)
Kernel driver in use: i915
Kernel modules: i915
00:04.0 Signal processing controller: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem (rev 0c)
Subsystem: Hewlett-Packard Company Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem
Kernel driver in use: proc_thermal
Kernel modules: processor_thermal_device
00:08.0 System peripheral: Intel Corporation Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th/8th Gen Core Processor Gaussian Mixture Model
Subsystem: Hewlett-Packard Company Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th/8th Gen Core Processor Gaussian Mixture Model
00:12.0 Signal processing controller: Intel Corporation Cannon Point-LP Thermal Controller (rev 30)
Subsystem: Hewlett-Packard Company Cannon Point-LP Thermal Controller
Kernel driver in use: intel_pch_thermal
Kernel modules: intel_pch_thermal
00:14.0 USB controller: Intel Corporation Cannon Point-LP USB 3.1 xHCI Controller (rev 30)
Subsystem: Hewlett-Packard Company Cannon Point-LP USB 3.1 xHCI Controller
Kernel driver in use: xhci_hcd
00:14.2 RAM memory: Intel Corporation Cannon Point-LP Shared SRAM (rev 30)
Subsystem: Hewlett-Packard Company Cannon Point-LP Shared SRAM
00:16.0 Communication controller: Intel Corporation Cannon Point-LP MEI Controller #1 (rev 30)
Subsystem: Hewlett-Packard Company Cannon Point-LP MEI Controller
Kernel driver in use: mei_me
Kernel modules: mei_me
00:17.0 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 30)
Subsystem: Hewlett-Packard Company 82801 Mobile SATA Controller [RAID mode]
Kernel driver in use: ahci
Kernel modules: ahci
00:1d.0 PCI bridge: Intel Corporation Cannon Point-LP PCI Express Root Port #9 (rev f0)
Kernel driver in use: pcieport
00:1d.1 PCI bridge: Intel Corporation Cannon Point-LP PCI Express Root Port #10 (rev f0)
Kernel driver in use: pcieport
00:1d.4 PCI bridge: Intel Corporation Cannon Point-LP PCI Express Root Port #13 (rev f0)
Kernel driver in use: pcieport
00:1f.0 ISA bridge: Intel Corporation Cannon Point-LP LPC Controller (rev 30)
Subsystem: Hewlett-Packard Company Cannon Point-LP LPC Controller
00:1f.3 Audio device: Intel Corporation Cannon Point-LP High Definition Audio Controller (rev 30)
Subsystem: Hewlett-Packard Company Cannon Point-LP High Definition Audio Controller
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel, snd_sof_pci
00:1f.4 SMBus: Intel Corporation Cannon Point-LP SMBus Controller (rev 30)
Subsystem: Hewlett-Packard Company Cannon Point-LP SMBus Controller
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
00:1f.5 Serial bus controller [0c80]: Intel Corporation Cannon Point-LP SPI Controller (rev 30)
Subsystem: Hewlett-Packard Company Cannon Point-LP SPI Controller
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)
DeviceName: Realtek Gaming GBE Family Controller
Subsystem: Hewlett-Packard Company RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
Kernel driver in use: r8169
Kernel modules: r8169
02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8822BE 802.11a/b/g/n/ac WiFi adapter
DeviceName: WLAN
Subsystem: Hewlett-Packard Company Realtek RTL8822BE 802.11ac 2 × 2 Wi-Fi + Bluetooth 4.2 Combo Adapter (MU-MIMO supported)
Kernel driver in use: rtw_pci
Kernel modules: rtwpci
03:00.0 Non-Volatile memory controller: Toshiba Corporation BG3 NVMe SSD Controller (rev 01)
Subsystem: Toshiba Corporation BG3 NVMe SSD Controller
Kernel driver in use: nvme
Kernel modules: nvme
#9
1
Better response on post RE: Bluetooth nie działa.Tu go mamy:
Kod:
02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8822BE 802.11a/b/g/n/ac WiFi adapter
DeviceName: WLAN
Subsystem: Hewlett-Packard Company Realtek RTL8822BE 802.11ac 2 × 2 Wi-Fi + Bluetooth 4.2 Combo Adapter (MU-MIMO supported)
Kernel driver in use: rtw_pci
Kernel modules: rtwpci
Także masz do wyboru tylko opcję z githuba, bo wygląda na to, że jeszcze nie trafiło do kernela wsparcie dla tej karty, przynajmniej wg poniższego linka
http://en.techinfodepot.shoutwiki.com/wi...mbo_Module
#10
0
Dziękuję za poświęcony czas i porady.


Skocz do:




Użytkownicy przeglądający ten wątek: 1 gości