Forum Linux Mint Polska › Portal

Witaj, Gość
Musisz się zarejestrować przed napisaniem posta.

Użytkownik
  

Hasło
  

Szukaj na forum

(Zaawansowane szukanie)

Statystyki
» Użytkownicy: 720
» Najnowszy użytkownik: Marsum7
» Wątków na forum: 2 660
» Postów na forum: 18 821

Pełne statystyki

Ostatnie wątki
Blade
Spotify nie odpala "Błędn...
Forum: Software
Ostatni post: Blade
39 minut(y) temu
» Odpowiedzi: 4
» Wyświetleń: 69
dedito
Upgrade 20.3 do 22.1
Forum: Instalacja i uruchamianie
Ostatni post: dedito
1 godzinę temu
» Odpowiedzi: 3
» Wyświetleń: 164
Tłumaczenie/translacje na...
Forum: System
Ostatni post: Tecumseh
17-01-2025, 23:38
» Odpowiedzi: 11
» Wyświetleń: 373
Blade
Linux Mint 22.1 wydany
Forum: Ogłoszenia i nowości
Ostatni post: Blade
17-01-2025, 18:21
» Odpowiedzi: 1
» Wyświetleń: 189
dedito
Problem z logowaniem
Forum: Podstawy
Ostatni post: dedito
17-01-2025, 06:56
» Odpowiedzi: 5
» Wyświetleń: 188
Kierownica Thrustmaster n...
Forum: Sprzęt i sterowniki
Ostatni post: thunderas
16-01-2025, 10:54
» Odpowiedzi: 2
» Wyświetleń: 124
mati75
Mint 22.1 zatwierdzono do...
Forum: Ogłoszenia i nowości
Ostatni post: mati75
16-01-2025, 09:35
» Odpowiedzi: 8
» Wyświetleń: 876
dedito
programy z androida na li...
Forum: Software
Ostatni post: dedito
15-01-2025, 16:50
» Odpowiedzi: 18
» Wyświetleń: 632
Problem z wolnym lub brak...
Forum: Sprzęt i sterowniki
Ostatni post: slawinek
14-01-2025, 19:45
» Odpowiedzi: 22
» Wyświetleń: 1 212
kszyhus
Rufus
Forum: Software
Ostatni post: kszyhus
14-01-2025, 18:19
» Odpowiedzi: 5
» Wyświetleń: 219

 
  Wifi Usb po restarcie komp czsem jest widoczne czasem nire
Napisane przez: Gość - 22-04-2020, 20:54 - Forum: Sprzęt i sterowniki - Odpowiedzi (3)

Witam wszystkich proszę o pomoc problem prawie za każdym uruchomieniem komputera dongle nie działa wyjęcie i włożenie go zawsze  pomaga   ale codzienne nurkowanie pod biórko wnerwia
nie wiem czy to może pomóc:  

Kod:
dmesg-w

[ 3398.969020] systemd[1]: Started Journal Service.
[ 3460.170956] usb 1-7: new high-speed USB device number 7 using ehci-pci
[ 3460.332118] usb 1-7: New USB device found, idVendor=2357, idProduct=0109
[ 3460.332121] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3460.332124] usb 1-7: Product: 802.11n NIC
[ 3460.332126] usb 1-7: Manufacturer: Realtek
[ 3460.332127] usb 1-7: SerialNumber: 00e04c000001
[ 3460.520990] usb 1-7: Vendor: Realtek
[ 3460.520992] usb 1-7: Product: 802.11n NI
[ 3460.520994] usb 1-7: Serial:
[ 3460.520995] usb 1-7: rtl8192eu_parse_efuse: dumping efuse (0x200 bytes):
[ 3460.520997] usb 1-7: 00: 29 81 00 7c 01 40 03 00
[ 3460.520999] usb 1-7: 08: 40 74 04 50 14 00 00 00
[ 3460.521000] usb 1-7: 10: 28 28 28 29 29 29 2c 2c
[ 3460.521001] usb 1-7: 18: 2c 2c 2c f2 ef ef ff ff
[ 3460.521003] usb 1-7: 20: ff ff ff ff ff ff ff ff
[ 3460.521004] usb 1-7: 28: ff ff ff ff ff ff ff ff
[ 3460.521005] usb 1-7: 30: ff ff ff ff ff ff ff ff
[ 3460.521006] usb 1-7: 38: ff ff 2a 2a 2a 2b 2b 2b
[ 3460.521008] usb 1-7: 40: 2d 2d 2d 2c 2c f2 ef ef
[ 3460.521009] usb 1-7: 48: ff ff ff ff ff ff ff ff
[ 3460.521010] usb 1-7: 50: ff ff ff ff ff ff ff ff
[ 3460.521011] usb 1-7: 58: ff ff ff ff ff ff ff ff
[ 3460.521013] usb 1-7: 60: ff ff ff ff ff ff ff ff
[ 3460.521014] usb 1-7: 68: ff ff ff ff ff ff ff ff
[ 3460.521015] usb 1-7: 70: ff ff ff ff ff ff ff ff
[ 3460.521017] usb 1-7: 78: ff ff ff ff ff ff ff ff
[ 3460.521018] usb 1-7: 80: ff ff ff ff ff ff ff ff
[ 3460.521019] usb 1-7: 88: ff ff ff ff ff ff ff ff
[ 3460.521020] usb 1-7: 90: ff ff ff ff ff ff ff ff
[ 3460.521022] usb 1-7: 98: ff ff ff ff ff ff ff ff
[ 3460.521023] usb 1-7: a0: ff ff ff ff ff ff ff ff
[ 3460.521024] usb 1-7: a8: ff ff ff ff ff ff ff ff
[ 3460.521026] usb 1-7: b0: ff ff ff ff ff ff ff ff
[ 3460.521027] usb 1-7: b8: a1 0f 23 00 00 00 ff ff
[ 3460.521028] usb 1-7: c0: ff 01 00 10 00 00 00 ff
[ 3460.521030] usb 1-7: c8: 00 00 ff ff ff ff ff ff
[ 3460.521031] usb 1-7: d0: 57 23 09 01 e7 47 02 50
[ 3460.521032] usb 1-7: d8: 3e aa 86 64 37 0a 03 52
[ 3460.521033] usb 1-7: e0: 65 61 6c 74 65 6b 20 0e
[ 3460.521035] usb 1-7: e8: 03 38 30 32 2e 31 31 6e
[ 3460.521036] usb 1-7: f0: 20 4e 49 43 20 00 00 ff
[ 3460.521037] usb 1-7: f8: ff ff ff ff ff ff ff ff
[ 3460.521039] usb 1-7: 100: ff ff ff ff ff ff ff ff
[ 3460.521040] usb 1-7: 108: ff ff ff ff ff ff ff ff
[ 3460.521041] usb 1-7: 110: ff ff ff ff ff ff ff 0d
[ 3460.521042] usb 1-7: 118: 03 00 05 00 30 00 00 00
[ 3460.521044] usb 1-7: 120: 00 93 ff ff ff ff ff ff
[ 3460.521045] usb 1-7: 128: ff ff ff ff ff ff ff ff
[ 3460.521046] usb 1-7: 130: f6 a8 98 2d 03 92 98 00
[ 3460.521047] usb 1-7: 138: fc 8c 00 11 9b 44 02 0a
[ 3460.521049] usb 1-7: 140: ff ff ff ff ff ff ff ff
[ 3460.521050] usb 1-7: 148: ff ff ff ff ff ff ff ff
[ 3460.521051] usb 1-7: 150: ff ff ff ff ff ff ff ff
[ 3460.521053] usb 1-7: 158: ff ff ff ff ff ff ff ff
[ 3460.521054] usb 1-7: 160: ff ff ff ff ff ff ff ff
[ 3460.521055] usb 1-7: 168: ff ff ff ff ff ff ff ff
[ 3460.521057] usb 1-7: 170: ff ff ff ff ff ff ff ff
[ 3460.521058] usb 1-7: 178: ff ff ff ff ff ff ff ff
[ 3460.521059] usb 1-7: 180: ff ff ff ff ff ff ff ff
[ 3460.521060] usb 1-7: 188: ff ff ff ff ff ff ff ff
[ 3460.521062] usb 1-7: 190: ff ff ff ff ff ff ff ff
[ 3460.521063] usb 1-7: 198: ff ff ff ff ff ff ff ff
[ 3460.521064] usb 1-7: 1a0: ff ff ff ff ff ff ff ff
[ 3460.521066] usb 1-7: 1a8: ff ff ff ff ff ff ff ff
[ 3460.521067] usb 1-7: 1b0: ff ff ff ff ff ff ff ff
[ 3460.521068] usb 1-7: 1b8: ff ff ff ff ff ff ff ff
[ 3460.521069] usb 1-7: 1c0: ff ff ff ff ff ff ff ff
[ 3460.521071] usb 1-7: 1c8: ff ff ff ff ff ff ff ff
[ 3460.521072] usb 1-7: 1d0: ff ff ff ff ff ff ff ff
[ 3460.521073] usb 1-7: 1d8: ff ff ff ff ff ff ff ff
[ 3460.521075] usb 1-7: 1e0: ff ff ff ff ff ff ff ff
[ 3460.521076] usb 1-7: 1e8: ff ff ff ff ff ff ff ff
[ 3460.521077] usb 1-7: 1f0: ff ff ff ff ff ff ff ff
[ 3460.521079] usb 1-7: 1f8: ff ff ff ff ff ff ff ff
[ 3460.521081] usb 1-7: RTL8192EU rev B (SMIC) 2T2R, TX queues 3, WiFi=1, BT=0, GPS=0, HI PA=0
[ 3460.521083] usb 1-7: RTL8192EU MAC: 50:3e:aa:86:64:37
[ 3460.521085] usb 1-7: rtl8xxxu: Loading firmware rtlwifi/rtl8192eu_nic.bin
[ 3460.521688] usb 1-7: Firmware revision 19.0 (signature 0x92e1)
[ 3461.579617] usb 1-7: rtl8192eu_rx_iqk_path_b: Path B RX IQK failed!
[ 3461.703368] usb 1-7: rtl8192eu_rx_iqk_path_a: Path A RX IQK failed!
[ 3461.744988] usb 1-7: rtl8192eu_rx_iqk_path_a: Path A RX IQK failed!
[ 3461.822616] usb 1-7: rtl8192eu_rx_iqk_path_b: Path B RX IQK failed!
[ 3462.109339] rtl8xxxu 1-7:1.0 wlx503eaa866437: renamed from wlan0
[ 3462.170983] IPv6: ADDRCONF(NETDEV_UP): wlx503eaa866437: link is not ready
[ 3462.192203] IPv6: ADDRCONF(NETDEV_UP): wlx503eaa866437: link is not ready
[ 3462.279361] IPv6: ADDRCONF(NETDEV_UP): wlx503eaa866437: link is not ready
[ 3463.547914] wlx503eaa866437: authenticate with 8c:eb:c6:74:e3:08
[ 3463.561534] wlx503eaa866437: send auth to 8c:eb:c6:74:e3:08 (try 1/3)
[ 3463.563185] wlx503eaa866437: authenticated
[ 3463.567238] wlx503eaa866437: associate with 8c:eb:c6:74:e3:08 (try 1/3)
[ 3463.570698] wlx503eaa866437: RX AssocResp from 8c:eb:c6:74:e3:08 (capab=0x11 status=0 aid=2)
[ 3463.570717] wlx503eaa866437: AP has invalid WMM params (AIFSN=1 for ACI 0), will use 2
[ 3463.572867] usb 1-7: rtl8xxxu_bss_info_changed: HT supported
[ 3463.574636] wlx503eaa866437: associated
[ 3464.890227] IPv6: ADDRCONF(NETDEV_CHANGE): wlx503eaa866437: link becomes ready
[ 3521.091664] kauditd_printk_skb: 11 callbacks suppressed
[ 3521.091665] audit: type=1400 audit(1587580810.167:23): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=15468 comm="apparmor_parser"
[ 3521.092310] audit: type=1400 audit(1587580810.167:24): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=15468 comm="apparmor_parser"
[ 3521.110680] audit: type=1400 audit(1587580810.187:25): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=15468 comm="apparmor_parser"
[ 3528.970639] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 3528.995474] JFS: nTxBlock = 8192, nTxLock = 65536
[ 3529.031361] ntfs: driver 2.1.32 [Flags: R/O MODULE].
[ 3529.085181] QNX4 filesystem 0.2.3 registered.
[ 3538.895091] audit: type=1400 audit(1587580827.973:26): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/usr/sbin/cups-browsed" pid=16845 comm="apparmor_parser"
działające wifi


Kod:
Bus 001 Device 006: ID 2357:0109  
Bus 001 Device 003: ID 04b4:6560 Cypress Semiconductor Corp. CY7C65640 USB-2.0 "TetraHub"
Bus 001 Device 002: ID 0424:2228 Standard Microsystems Corp. 9-in-2 Card Reader
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 002: ID 1bcf:0005 Sunplus Innovation Technology Inc. Optical Mouse
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
ppp@pppwsk:~$ rfkill list
1: phy1: Wireless LAN
Soft blocked: no
Hard blocked: no


i niedziałające
Kod:
ppp@pppwsk:~$ lsusb
Bus 001 Device 004: ID 2357:0109  
Bus 001 Device 003: ID 04b4:6560 Cypress Semiconductor Corp. CY7C65640 USB-2.0 "TetraHub"
Bus 001 Device 002: ID 0424:2228 Standard Microsystems Corp. 9-in-2 Card Reader
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 002: ID 1bcf:0005 Sunplus Innovation Technology Inc. Optical Mouse
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
ppp@pppwsk:~$ rfkill list
0: phy0: Wireless LAN
    Soft blocked: no
    Hard blocked: no

Kod:
ppp@pppwsk:~$ inxi -Fxz
System:
  Host: pppwsk Kernel: 4.15.0-96-generic x86_64 bits: 64 compiler: gcc
  v: 7.5.0 Desktop: MATE 1.20.1 Distro: Linux Mint 19.1 Tessa
  base: Ubuntu 18.04 bionic
Machine:
  Type: Desktop Mobo: Gigabyte model: G31M-ES2L v: x.x serial: <filter>
  BIOS: Award v: FH date: 04/30/2010
CPU:
  Topology: Dual Core model: Intel Core2 Duo E7500 bits: 64 type: MCP
  arch: Penryn rev: A L2 cache: 3072 KiB
  flags: lm nx pae sse sse2 sse3 sse4_1 ssse3 vmx bogomips: 11733
  Speed: 2167 MHz min/max: 1600/2933 MHz Core speeds (MHz): 1: 2130 2: 2161
Graphics:
  Device-1: NVIDIA GP108 [GeForce GT 1030] vendor: Gigabyte driver: nouveau
  v: kernel bus ID: 01:00.0
  Display: x11 server: X.Org 1.19.6 driver: nouveau
  unloaded: fbdev,modesetting,vesa resolution: 1280x1024~60Hz
  OpenGL: renderer: llvmpipe (LLVM 9.0 128 bits) v: 3.3 Mesa 19.2.8
  direct render: Yes
Audio:
  Device-1: Intel NM10/ICH7 Family High Definition Audio
  vendor: Gigabyte GA-D525TUD driver: snd_hda_intel v: kernel
  bus ID: 00:1b.0
  Device-2: NVIDIA GP108 High Definition Audio vendor: Gigabyte
  driver: snd_hda_intel v: kernel bus ID: 01:00.1
  Sound Server: ALSA v: k4.15.0-96-generic
Network:
  Device-1: Qualcomm Atheros AR8131 Gigabit Ethernet
  vendor: Gigabyte GA-G31M-ES2L driver: atl1c v: 1.0.1.1-NAPI port: bf00
  bus ID: 03:00.0
  IF: enp3s0 state: down mac: <filter>
Drives:
  Local Storage: total: 111.79 GiB used: 63.81 GiB (57.1%)
  ID-1: /dev/sda vendor: GOODRAM model: GOODRAM size: 111.79 GiB
Partition:
  ID-1: / size: 109.53 GiB used: 63.81 GiB (58.3%) fs: ext4 dev: /dev/sda1
Sensors:
  System Temperatures: cpu: 38.0 C mobo: N/A gpu: nouveau temp: 43 C
  Fan Speeds (RPM): N/A gpu: nouveau fan: 0
Info:
  Processes: 149 Uptime: 12m Memory: 3.85 GiB used: 738.7 MiB (18.7%)
  Init: systemd runlevel: 5 Compilers: gcc: 7.5.0 Shell: bash v: 4.4.20
  inxi: 3.0.27
Dodano po pewnym czasie:
wynik pliku działającego już mam ale jak go przesłac nie widzę możliwosci załaczników?

jednak najpierw niedziałający bo mi nadpisało podłączony jest też telefon bo inaczej nie miałem daostepu do skryptu

Kod:
########## wireless info START ##########

Report from: 23 Apr 2020 08:44 CEST +0200

Booted last: 23 Apr 2020 00:00 CEST +0200

Script from: 22 Oct 2018 03:34 UTC +0000

##### release ###########################

Distributor ID:    LinuxMint
Description:    Linux Mint 19.1 Tessa
Release:    19.1
Codename:    tessa

##### kernel ############################

Linux 4.15.0-96-generic #97-Ubuntu SMP Wed Apr 1 03:25:46 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux

Parameters: ro, quiet, splash, vt.handoff=1

##### desktop ###########################

MATE

##### lspci #############################

03:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8131 Gigabit Ethernet [1969:1063] (rev c0)
    Subsystem: Gigabyte Technology Co., Ltd GA-G31M-ES2L Motherboard [1458:e000]
    Kernel driver in use: atl1c

##### lsusb #############################

Bus 001 Device 004: ID 2357:0109  
Bus 001 Device 012: ID 2717:ff80  
Bus 001 Device 003: ID 04b4:6560 Cypress Semiconductor Corp. CY7C65640 USB-2.0 "TetraHub"
Bus 001 Device 002: ID 0424:2228 Standard Microsystems Corp. 9-in-2 Card Reader
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 002: ID 1bcf:0005 Sunplus Innovation Technology Inc. Optical Mouse
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

##### PCMCIA card info ##################

##### rfkill ############################

0: phy0: Wireless LAN
    Soft blocked: no
    Hard blocked: no

##### secure boot #######################

'mokutil' is not installed (package "mokutil").

##### lsmod #############################

rtl8xxxu              122880  0
mac80211              786432  1 rtl8xxxu
cfg80211              634880  1 mac80211
mxm_wmi                16384  1 nouveau
wmi                    24576  2 mxm_wmi,nouveau

##### interfaces ########################

[/etc/network/interfaces]
auto lo
iface lo inet loopback

##### ifconfig ##########################

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback <MAC address> brd <MAC address>
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: enp3s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel state DOWN group default qlen 1000
    link/ether <MAC 'enp3s0' [IF1]> brd <MAC address>
3: wlx<IF from MAC [IF2]>: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
    link/ether <MAC 'wlx<IF from MAC [IF2]>' [IF2]> brd <MAC address>
5: enp0s29f7u6u1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UNKNOWN group default qlen 1000
    link/ether <MAC 'enp0s29f7u6u1' [IF3]> brd <MAC address>
    inet 192.168.42.206/24 brd 192.168.42.255 scope global dynamic noprefixroute enp0s29f7u6u1
       valid_lft 3580sec preferred_lft 3580sec
    inet6 fe80::9fae:2d2a:4c8c:a869/64 scope link noprefixroute
       valid_lft forever preferred_lft forever

##### iwconfig ##########################

enp0s29f7u6u1  no wireless extensions.

lo        no wireless extensions.

enp3s0    no wireless extensions.

wlx<IF from MAC [IF2]>  IEEE 802.11  ESSID:off/any  
          Mode:Managed  Access Point: Not-Associated   Tx-Power=20 dBm  
          Retry short limit:7   RTS thr=2347 B   Fragment thr:off
          Power Management:off
          

##### route #############################

default via 192.168.42.129 dev enp0s29f7u6u1 proto dhcp metric 100
169.254.0.0/16 dev enp0s29f7u6u1 scope link metric 1000
192.168.42.0/24 dev enp0s29f7u6u1 proto kernel scope link src 192.168.42.206 metric 100

##### resolv.conf #######################

[777 root '/etc/resolv.conf' -> '../run/systemd/resolve/stub-resolv.conf']

nameserver 127.0.0.53
options edns0

##### network managers ##################

Installed:

    NetworkManager

Running:

root       600     1  0 08:42 ?        00:00:00 /usr/sbin/NetworkManager --no-daemon

##### NetworkManager info ###############

GENERAL.DEVICE:                         enp0s29f7u6u1
GENERAL.TYPE:                           ethernet
GENERAL.NM-TYPE:                        NMDeviceEthernet
GENERAL.VENDOR:                         Android
GENERAL.PRODUCT:                        Android
GENERAL.DRIVER:                         rndis_host
GENERAL.DRIVER-VERSION:                 22-Aug-2005
GENERAL.FIRMWARE-VERSION:               RNDIS device
GENERAL.HWADDR:                         <MAC 'enp0s29f7u6u1' [IF3]>
GENERAL.MTU:                            1500
GENERAL.STATE:                          100 (connected)
GENERAL.REASON:                         0 (No reason given)
GENERAL.UDI:                            /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.1/1-6.1:1.0/net/enp0s29f7u6u1
GENERAL.IP-IFACE:                       enp0s29f7u6u1
GENERAL.IS-SOFTWARE:                    no
GENERAL.NM-MANAGED:                     yes
GENERAL.AUTOCONNECT:                    yes
GENERAL.FIRMWARE-MISSING:               no
GENERAL.NM-PLUGIN-MISSING:              no
GENERAL.PHYS-PORT-ID:                   --
GENERAL.CONNECTION:                     Wired connection 2
GENERAL.CON-UUID:                       2bf7858d-d7e5-3d73-8e85-bd9432c931ac
GENERAL.CON-PATH:                       /org/freedesktop/NetworkManager/ActiveConnection/6
GENERAL.METERED:                        yes (guessed)
CAPABILITIES.CARRIER-DETECT:            yes
CAPABILITIES.SPEED:                     unknown
CAPABILITIES.IS-SOFTWARE:               no
CAPABILITIES.SRIOV:                     no
WIRED-PROPERTIES.CARRIER:               on
IP4.ADDRESS[1]:                         192.168.42.206/24
IP4.GATEWAY:                            192.168.42.129
IP4.ROUTE[1]:                           dst = 0.0.0.0/0, nh = 192.168.42.129, mt = 100
IP4.ROUTE[2]:                           dst = 192.168.42.0/24, nh = 0.0.0.0, mt = 100
IP4.ROUTE[3]:                           dst = 169.254.0.0/16, nh = 0.0.0.0, mt = 1000
IP4.DNS[1]:                             192.168.42.129
DHCP4.OPTION[1]:                        requested_subnet_mask = 1
DHCP4.OPTION[2]:                        requested_rfc3442_classless_static_routes = 1
DHCP4.OPTION[3]:                        subnet_mask = 255.255.255.0
DHCP4.OPTION[4]:                        domain_name_servers = 192.168.42.129
DHCP4.OPTION[5]:                        ip_address = 192.168.42.206
DHCP4.OPTION[6]:                        requested_static_routes = 1
DHCP4.OPTION[7]:                        dhcp_server_identifier = 192.168.42.129
DHCP4.OPTION[8]:                        requested_time_offset = 1
DHCP4.OPTION[9]:                        broadcast_address = 192.168.42.255
DHCP4.OPTION[10]:                       requested_interface_mtu = 1
DHCP4.OPTION[11]:                       dhcp_rebinding_time = 3150
DHCP4.OPTION[12]:                       requested_domain_name_servers = 1
DHCP4.OPTION[13]:                       dhcp_message_type = 5
DHCP4.OPTION[14]:                       requested_broadcast_address = 1
DHCP4.OPTION[15]:                       dhcp_renewal_time = 1800
DHCP4.OPTION[16]:                       routers = 192.168.42.129
DHCP4.OPTION[17]:                       requested_domain_name = 1
DHCP4.OPTION[18]:                       requested_routers = 1
DHCP4.OPTION[19]:                       expiry = 1587627858
DHCP4.OPTION[20]:                       host_name = pppwsk
DHCP4.OPTION[21]:                       requested_wpad = 1
DHCP4.OPTION[22]:                       requested_netbios_scope = 1
DHCP4.OPTION[23]:                       requested_ms_classless_static_routes = 1
DHCP4.OPTION[24]:                       requested_netbios_name_servers = 1
DHCP4.OPTION[25]:                       network_number = 192.168.42.0
DHCP4.OPTION[26]:                       requested_domain_search = 1
DHCP4.OPTION[27]:                       requested_ntp_servers = 1
DHCP4.OPTION[28]:                       next_server = 192.168.42.129
DHCP4.OPTION[29]:                       vendor_encapsulated_options = ANDROID_METERED
DHCP4.OPTION[30]:                       requested_host_name = 1
DHCP4.OPTION[31]:                       dhcp_lease_time = 3600
IP6.ADDRESS[1]:                         fe80::9fae:2d2a:4c8c:a869/64
IP6.GATEWAY:                            --
IP6.ROUTE[1]:                           dst = ff00::/8, nh = ::, mt = 256, table=255
IP6.ROUTE[2]:                           dst = fe80::/64, nh = ::, mt = 256
IP6.ROUTE[3]:                           dst = fe80::/64, nh = ::, mt = 100
CONNECTIONS.AVAILABLE-CONNECTION-PATHS: /org/freedesktop/NetworkManager/Settings/{4}
CONNECTIONS.AVAILABLE-CONNECTIONS[1]:   2bf7858d-d7e5-3d73-8e85-bd9432c931ac | Wired connection 2

GENERAL.DEVICE:                         wlx<IF from MAC [IF2]>
GENERAL.TYPE:                           wifi
GENERAL.NM-TYPE:                        NMDeviceWifi
GENERAL.VENDOR:                         Realtek
GENERAL.PRODUCT:                        802.11n NIC
GENERAL.DRIVER:                         rtl8xxxu
GENERAL.DRIVER-VERSION:                 4.15.0-96-generic
GENERAL.FIRMWARE-VERSION:               N/A
GENERAL.HWADDR:                         <MAC 'wlx<IF from MAC [IF2]>' [IF2]>
GENERAL.MTU:                            1500
GENERAL.STATE:                          30 (disconnected)
GENERAL.REASON:                         0 (No reason given)
GENERAL.UDI:                            /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7:1.0/net/wlx<IF from MAC [IF2]>
GENERAL.IP-IFACE:                       --
GENERAL.IS-SOFTWARE:                    no
GENERAL.NM-MANAGED:                     yes
GENERAL.AUTOCONNECT:                    yes
GENERAL.FIRMWARE-MISSING:               no
GENERAL.NM-PLUGIN-MISSING:              no
GENERAL.PHYS-PORT-ID:                   --
GENERAL.CONNECTION:                     --
GENERAL.CON-UUID:                       --
GENERAL.CON-PATH:                       --
GENERAL.METERED:                        unknown
CAPABILITIES.CARRIER-DETECT:            no
CAPABILITIES.SPEED:                     unknown
CAPABILITIES.IS-SOFTWARE:               no
CAPABILITIES.SRIOV:                     no
WIFI-PROPERTIES.WEP:                    yes
WIFI-PROPERTIES.WPA:                    yes
WIFI-PROPERTIES.WPA2:                   yes
WIFI-PROPERTIES.TKIP:                   yes
WIFI-PROPERTIES.CCMP:                   yes
WIFI-PROPERTIES.AP:                     no
WIFI-PROPERTIES.ADHOC:                  no
WIFI-PROPERTIES.2GHZ:                   yes
WIFI-PROPERTIES.5GHZ:                   no
CONNECTIONS.AVAILABLE-CONNECTION-PATHS: /org/freedesktop/NetworkManager/Settings/{1}
CONNECTIONS.AVAILABLE-CONNECTIONS[1]:   31b1ae45-bf05-465d-85dc-a6f4f12a9775 | wsk

GENERAL.DEVICE:                         enp3s0
GENERAL.TYPE:                           ethernet
GENERAL.NM-TYPE:                        NMDeviceEthernet
GENERAL.VENDOR:                         Qualcomm Atheros
GENERAL.PRODUCT:                        AR8131 Gigabit Ethernet (GA-G31M-ES2L Motherboard)
GENERAL.DRIVER:                         atl1c
GENERAL.DRIVER-VERSION:                 1.0.1.1-NAPI
GENERAL.FIRMWARE-VERSION:               --
GENERAL.HWADDR:                         <MAC 'enp3s0' [IF1]>
GENERAL.MTU:                            1500
GENERAL.STATE:                          20 (unavailable)
GENERAL.REASON:                         2 (Device is now managed)
GENERAL.UDI:                            /sys/devices/pci0000:00/0000:00:1c.1/0000:03:00.0/net/enp3s0
GENERAL.IP-IFACE:                       --
GENERAL.IS-SOFTWARE:                    no
GENERAL.NM-MANAGED:                     yes
GENERAL.AUTOCONNECT:                    yes
GENERAL.FIRMWARE-MISSING:               no
GENERAL.NM-PLUGIN-MISSING:              no
GENERAL.PHYS-PORT-ID:                   --
GENERAL.CONNECTION:                     --
GENERAL.CON-UUID:                       --
GENERAL.CON-PATH:                       --
GENERAL.METERED:                        unknown
CAPABILITIES.CARRIER-DETECT:            yes
CAPABILITIES.SPEED:                     unknown
CAPABILITIES.IS-SOFTWARE:               no
CAPABILITIES.SRIOV:                     no
WIRED-PROPERTIES.CARRIER:               off
CONNECTIONS.AVAILABLE-CONNECTION-PATHS: --

SSID   BSSID              MODE   CHAN  FREQ      RATE        SIGNAL  BARS  SECURITY  ACTIVE  IN-USE
Redmi  <MAC 'Redmi' [AC1]>  Infra  1     2412 MHz  65 Mbit/s   27      ▂___  --        no            
wsk    <MAC 'wsk' [AC2]>  Infra  5     2432 MHz  270 Mbit/s  20      ▂___  WPA2      no            

##### NetworkManager.state ##############

[main]
NetworkingEnabled=true
WirelessEnabled=true
WWANEnabled=true

##### NetworkManager config #############

[[/etc/NetworkManager/conf.d/default-wifi-powersave-on.conf]]
[connection]
wifi.powersave = 3

[[/etc/NetworkManager/NetworkManager.conf]]
[main]
plugins=ifupdown,keyfile
[ifupdown]
managed=false
[device]
wifi.scan-rand-mac-address=no

[[/usr/lib/NetworkManager/conf.d/10-dns-resolved.conf]]
[main]
dns=systemd-resolved

[[/usr/lib/NetworkManager/conf.d/10-globally-managed-devices.conf]]
[keyfile]
unmanaged-devices=*,except:type:wifi,except:type:wwan

[[/usr/lib/NetworkManager/conf.d/20-connectivity-ubuntu.conf]]
[connectivity]
uri=http://connectivity-check.ubuntu.com/

[[/usr/lib/NetworkManager/conf.d/no-mac-addr-change.conf]]
[device-mac-addr-change-wifi]
match-device=driver:rtl8723bs,driver:rtl8189es,driver:r8188eu,driver:8188eu,driver:eagle_sdio,driver:wl
wifi.scan-rand-mac-address=no
wifi.cloned-mac-address=preserve
ethernet.cloned-mac-address=preserve

##### NetworkManager profiles ###########

[[/etc/NetworkManager/system-connections/wsk]] (600 root)
[connection] id=wsk | type=wifi | permissions=user:ppp:;
[wifi] mac-address=<MAC 'wlx<IF from MAC [IF2]>' [IF2]> | mac-address-blacklist= | ssid=wsk
[ipv4] method=auto
[ipv6] method=auto

##### Netplan config ####################

[/etc/netplan/1-network-manager-all.yaml]
network:
  version: 2
  renderer: NetworkManager

##### iw reg get ########################

Region: Europe/Warsaw (based on set time zone)

global
country 00: DFS-UNSET
    (2402 - 2472 @ 40), (N/A, 20), (N/A)
    (2457 - 2482 @ 20), (N/A, 20), (N/A), AUTO-BW, PASSIVE-SCAN
    (2474 - 2494 @ 20), (N/A, 20), (N/A), NO-OFDM, PASSIVE-SCAN
    (5170 - 5250 @ 80), (N/A, 20), (N/A), AUTO-BW, PASSIVE-SCAN
    (5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS, AUTO-BW, PASSIVE-SCAN
    (5490 - 5730 @ 160), (N/A, 20), (0 ms), DFS, PASSIVE-SCAN
    (5735 - 5835 @ 80), (N/A, 20), (N/A), PASSIVE-SCAN
    (57240 - 63720 @ 2160), (N/A, 0), (N/A)

##### iwlist channels ###################

enp0s29f7u6u1  no frequency information.

lo        no frequency information.

enp3s0    no frequency information.

wlx<IF from MAC [IF2]>  14 channels in total; available frequencies :
          Channel 01 : 2.412 GHz
          Channel 02 : 2.417 GHz
          Channel 03 : 2.422 GHz
          Channel 04 : 2.427 GHz
          Channel 05 : 2.432 GHz
          Channel 06 : 2.437 GHz
          Channel 07 : 2.442 GHz
          Channel 08 : 2.447 GHz
          Channel 09 : 2.452 GHz
          Channel 10 : 2.457 GHz
          Channel 11 : 2.462 GHz
          Channel 12 : 2.467 GHz
          Channel 13 : 2.472 GHz
          Channel 14 : 2.484 GHz

##### iwlist scan #######################

enp0s29f7u6u1  Interface doesn't support scanning.

lo        Interface doesn't support scanning.

enp3s0    Interface doesn't support scanning.

Channel occupancy:

      1   APs on   Frequency:2.412 GHz (Channel 1)
      1   APs on   Frequency:2.432 GHz (Channel 5)

wlx<IF from MAC [IF2]>  Scan completed :
          Cell 01 - Address: <MAC 'Redmi' [AC1]>
                    Channel:1
                    Frequency:2.412 GHz (Channel 1)
                    Quality=26/70  Signal level=-84 dBm  
                    Encryption key:off
                    ESSID:"Redmi"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s
                    Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s
                              36 Mb/s; 48 Mb/s; 54 Mb/s
                    Mode:Master
                    Extra:tsf=0000000003e99185
                    Extra: Last beacon: 1060ms ago
          Cell 02 - Address: <MAC 'wsk' [AC2]>
                    Channel:5
                    Frequency:2.432 GHz (Channel 5)
                    Quality=22/70  Signal level=-88 dBm  
                    Encryption key:on
                    ESSID:"wsk"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
                              24 Mb/s; 36 Mb/s; 54 Mb/s
                    Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s
                    Mode:Master
                    Extra:tsf=000000474c08508a
                    Extra: Last beacon: 224ms ago
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : CCMP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK

##### module infos ######################

[rtl8xxxu]
filename:       /lib/modules/4.15.0-96-generic/kernel/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.ko
firmware:       rtlwifi/rtl8723bu_bt.bin
firmware:       rtlwifi/rtl8723bu_nic.bin
firmware:       rtlwifi/rtl8192eu_nic.bin
firmware:       rtlwifi/rtl8192cufw_TMSC.bin
firmware:       rtlwifi/rtl8192cufw_B.bin
firmware:       rtlwifi/rtl8192cufw_A.bin
firmware:       rtlwifi/rtl8723aufw_B_NoBT.bin
firmware:       rtlwifi/rtl8723aufw_B.bin
firmware:       rtlwifi/rtl8723aufw_A.bin
license:        GPL
description:    RTL8XXXu USB mac80211 Wireless LAN Driver
author:         Jes Sorensen <[email protected]>
srcversion:     559CC993CAAED2B1789F4CF
depends:        mac80211
retpoline:      Y
intree:         Y
name:           rtl8xxxu
vermagic:       4.15.0-96-generic SMP mod_unload
signat:         PKCS#7
signer:        
sig_key:        
sig_hashalgo:   md4
parm:           debug:Set debug mask (int)
parm:           ht40_2g:Enable HT40 support on the 2.4GHz band (bool)
parm:           dma_aggregation:Enable DMA packet aggregation (bool)
parm:           dma_agg_timeout:Set DMA aggregation timeout (range 1-127) (int)
parm:           dma_agg_pages:Set DMA aggregation pages (range 1-127, 0 to disable) (int)

[mac80211]
filename:       /lib/modules/4.15.0-96-generic/kernel/net/mac80211/mac80211.ko
license:        GPL
description:    IEEE 802.11 subsystem
srcversion:     E91E6F217E202F31AADED53
depends:        cfg80211
retpoline:      Y
intree:         Y
name:           mac80211
vermagic:       4.15.0-96-generic SMP mod_unload
signat:         PKCS#7
signer:        
sig_key:        
sig_hashalgo:   md4
parm:           minstrel_vht_only:Use only VHT rates when VHT is supported by sta. (bool)
parm:           max_nullfunc_tries:Maximum nullfunc tx tries before disconnecting (reason 4). (int)
parm:           max_probe_tries:Maximum probe tries before disconnecting (reason 4). (int)
parm:           beacon_loss_count:Number of beacon intervals before we decide beacon was lost. (int)
parm:           probe_wait_ms:Maximum time(ms) to wait for probe response before disconnecting (reason 4). (int)
parm:           ieee80211_default_rc_algo:Default rate control algorithm for mac80211 to use (charp)

[cfg80211]
filename:       /lib/modules/4.15.0-96-generic/kernel/net/wireless/cfg80211.ko
description:    wireless configuration support
license:        GPL
author:         Johannes Berg
srcversion:     E59180B39A14C88983A9687
depends:        
retpoline:      Y
intree:         Y
name:           cfg80211
vermagic:       4.15.0-96-generic SMP mod_unload
signat:         PKCS#7
signer:        
sig_key:        
sig_hashalgo:   md4
parm:           bss_entries_limit:limit to number of scan BSS entries (per wiphy, default 1000) (int)
parm:           ieee80211_regdom:IEEE 802.11 regulatory domain code (charp)
parm:           cfg80211_disable_40mhz_24ghz:Disable 40MHz support in the 2.4GHz band (bool)

##### module parameters #################

grep: /sys/module/rtl8xxxu/parameters/debug: Permission denied
grep: /sys/module/rtl8xxxu/parameters/dma_agg_pages: Permission denied
grep: /sys/module/rtl8xxxu/parameters/dma_aggregation: Permission denied
grep: /sys/module/rtl8xxxu/parameters/dma_agg_timeout: Permission denied
grep: /sys/module/rtl8xxxu/parameters/ht40_2g: Permission denied
[rtl8xxxu]

[mac80211]
beacon_loss_count: 7
ieee80211_default_rc_algo: minstrel_ht
max_nullfunc_tries: 2
max_probe_tries: 5
minstrel_vht_only: Y
probe_wait_ms: 500

[cfg80211]
bss_entries_limit: 1000
cfg80211_disable_40mhz_24ghz: N
ieee80211_regdom: 00

##### /etc/modules ######################

##### modprobe options ##################

[/etc/modprobe.d/amd64-microcode-blacklist.conf]
blacklist microcode

[/etc/modprobe.d/blacklist-ath_pci.conf]
blacklist ath_pci

[/etc/modprobe.d/blacklist.conf]
blacklist evbug
blacklist usbmouse
blacklist usbkbd
blacklist eepro100
blacklist de4x5
blacklist eth1394
blacklist snd_intel8x0m
blacklist snd_aw2
blacklist i2c_i801
blacklist prism54
blacklist bcm43xx
blacklist garmin_gps
blacklist asus_acpi
blacklist snd_pcsp
blacklist pcspkr
blacklist amd76x_edac

[/etc/modprobe.d/blacklist-rare-network.conf]
alias net-pf-3 off
alias net-pf-6 off
alias net-pf-9 off
alias net-pf-11 off
alias net-pf-12 off
alias net-pf-19 off
alias net-pf-21 off
alias net-pf-36 off

[/etc/modprobe.d/intel-microcode-blacklist.conf]
blacklist microcode

[/etc/modprobe.d/iwlwifi.conf]
remove iwlwifi \
(/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod) \
&& /sbin/modprobe -r mac80211

##### rc.local ##########################

grep: /etc/rc.local: No such file or directory

##### pm-utils ##########################

##### udev rules ########################

##### dmesg #############################

[   24.056498] wlx<IF from MAC [IF2]>: authenticate with <MAC 'wsk' [AC2]>
[   24.087166] wlx<IF from MAC [IF2]>: send auth to <MAC 'wsk' [AC2]> (try 1/3)
[   24.288063] wlx<IF from MAC [IF2]>: send auth to <MAC 'wsk' [AC2]> (try 2/3)
[   24.492047] wlx<IF from MAC [IF2]>: send auth to <MAC 'wsk' [AC2]> (try 3/3)
[   24.696053] wlx<IF from MAC [IF2]>: authentication with <MAC 'wsk' [AC2]> timed out
[   26.404780] wlx<IF from MAC [IF2]>: authenticate with <MAC 'wsk' [AC2]>
[   26.429816] wlx<IF from MAC [IF2]>: send auth to <MAC 'wsk' [AC2]> (try 1/3)
[   26.632085] wlx<IF from MAC [IF2]>: send auth to <MAC 'wsk' [AC2]> (try 2/3)
[   26.836057] wlx<IF from MAC [IF2]>: send auth to <MAC 'wsk' [AC2]> (try 3/3)
[   27.040102] wlx<IF from MAC [IF2]>: authentication with <MAC 'wsk' [AC2]> timed out
[   29.320457] wlx<IF from MAC [IF2]>: authenticate with <MAC 'wsk' [AC2]>
[   29.345403] wlx<IF from MAC [IF2]>: send auth to <MAC 'wsk' [AC2]> (try 1/3)
[   29.548037] wlx<IF from MAC [IF2]>: send auth to <MAC 'wsk' [AC2]> (try 2/3)
[   29.752506] wlx<IF from MAC [IF2]>: send auth to <MAC 'wsk' [AC2]> (try 3/3)
[   29.956035] wlx<IF from MAC [IF2]>: authentication with <MAC 'wsk' [AC2]> timed out
[   39.237356] wlx<IF from MAC [IF2]>: authenticate with <MAC 'wsk' [AC2]>
[   39.249651] wlx<IF from MAC [IF2]>: send auth to <MAC 'wsk' [AC2]> (try 1/3)
[   39.452051] wlx<IF from MAC [IF2]>: send auth to <MAC 'wsk' [AC2]> (try 2/3)
[   39.656021] wlx<IF from MAC [IF2]>: send auth to <MAC 'wsk' [AC2]> (try 3/3)
[   39.860018] wlx<IF from MAC [IF2]>: authentication with <MAC 'wsk' [AC2]> timed out
[   47.011080] IPv6: ADDRCONF(NETDEV_UP): wlx<IF from MAC [IF2]>: link is not ready
[   48.247148] wlx<IF from MAC [IF2]>: authenticate with <MAC 'wsk' [AC2]>
[   48.263907] wlx<IF from MAC [IF2]>: send auth to <MAC 'wsk' [AC2]> (try 1/3)
[   48.464067] wlx<IF from MAC [IF2]>: send auth to <MAC 'wsk' [AC2]> (try 2/3)
[   48.668053] wlx<IF from MAC [IF2]>: send auth to <MAC 'wsk' [AC2]> (try 3/3)
[   48.872026] wlx<IF from MAC [IF2]>: authentication with <MAC 'wsk' [AC2]> timed out
[   60.088621] wlx<IF from MAC [IF2]>: authenticate with <MAC 'wsk' [AC2]>
[   60.123038] wlx<IF from MAC [IF2]>: send auth to <MAC 'wsk' [AC2]> (try 1/3)
[   60.323996] wlx<IF from MAC [IF2]>: send auth to <MAC 'wsk' [AC2]> (try 2/3)
[   60.527995] wlx<IF from MAC [IF2]>: send auth to <MAC 'wsk' [AC2]> (try 3/3)
[   60.732009] wlx<IF from MAC [IF2]>: authentication with <MAC 'wsk' [AC2]> timed out
[   73.004299] IPv6: ADDRCONF(NETDEV_UP): wlx<IF from MAC [IF2]>: link is not ready
[   74.230393] wlx<IF from MAC [IF2]>: authenticate with <MAC 'wsk' [AC2]>
[   74.248721] wlx<IF from MAC [IF2]>: send auth to <MAC 'wsk' [AC2]> (try 1/3)
[   74.451989] wlx<IF from MAC [IF2]>: send auth to <MAC 'wsk' [AC2]> (try 2/3)
[   74.655999] wlx<IF from MAC [IF2]>: send auth to <MAC 'wsk' [AC2]> (try 3/3)
[   74.860007] wlx<IF from MAC [IF2]>: authentication with <MAC 'wsk' [AC2]> timed out
[   86.084481] wlx<IF from MAC [IF2]>: authenticate with <MAC 'wsk' [AC2]>
[   86.119407] wlx<IF from MAC [IF2]>: send auth to <MAC 'wsk' [AC2]> (try 1/3)
[   86.319992] wlx<IF from MAC [IF2]>: send auth to <MAC 'wsk' [AC2]> (try 2/3)
[   86.529107] wlx<IF from MAC [IF2]>: send auth to <MAC 'wsk' [AC2]> (try 3/3)
[   86.732035] wlx<IF from MAC [IF2]>: authentication with <MAC 'wsk' [AC2]> timed out
[   99.004214] IPv6: ADDRCONF(NETDEV_UP): wlx<IF from MAC [IF2]>: link is not ready
[  100.200272] wlx<IF from MAC [IF2]>: authenticate with <MAC 'wsk' [AC2]>
[  100.218212] wlx<IF from MAC [IF2]>: send auth to <MAC 'wsk' [AC2]> (try 1/3)
[  100.419961] wlx<IF from MAC [IF2]>: send auth to <MAC 'wsk' [AC2]> (try 2/3)
[  100.624007] wlx<IF from MAC [IF2]>: send auth to <MAC 'wsk' [AC2]> (try 3/3)
[  100.828031] wlx<IF from MAC [IF2]>: authentication with <MAC 'wsk' [AC2]> timed out
[  112.064443] wlx<IF from MAC [IF2]>: authenticate with <MAC 'wsk' [AC2]>
[  112.088953] wlx<IF from MAC [IF2]>: send auth to <MAC 'wsk' [AC2]> (try 1/3)
[  112.293109] wlx<IF from MAC [IF2]>: send auth to <MAC 'wsk' [AC2]> (try 2/3)
[  112.495977] wlx<IF from MAC [IF2]>: send auth to <MAC 'wsk' [AC2]> (try 3/3)
[  112.699955] wlx<IF from MAC [IF2]>: authentication with <MAC 'wsk' [AC2]> timed out
[  120.022801] rndis_host 1-6.1:1.0 enp0s29f7u6u1: renamed from usb0
[  120.046004] IPv6: ADDRCONF(NETDEV_UP): enp0s29f7u6u1: link is not ready
[  122.169476] rndis_host 1-6.1:1.0 enp0s29f7u6u1: unregister 'rndis_host' usb-0000:00:1d.7-6.1, RNDIS device
[  125.003656] IPv6: ADDRCONF(NETDEV_UP): wlx<IF from MAC [IF2]>: link is not ready
[  127.739230] rndis_host 1-6.1:1.0 enp0s29f7u6u1: renamed from usb0
[  127.768488] IPv6: ADDRCONF(NETDEV_UP): enp0s29f7u6u1: link is not ready

########## wireless info END ############


a teraz działający
Kod:
########## wireless info START ##########

Report from: 23 Apr 2020 08:52 CEST +0200

Booted last: 23 Apr 2020 00:00 CEST +0200

Script from: 22 Oct 2018 03:34 UTC +0000

##### release ###########################

Distributor ID: LinuxMint
Description: Linux Mint 19.1 Tessa
Release: 19.1
Codename: tessa

##### kernel ############################

Linux 4.15.0-96-generic #97-Ubuntu SMP Wed Apr 1 03:25:46 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux

Parameters: ro, quiet, splash, vt.handoff=1

##### desktop ###########################

MATE

##### lspci #############################

03:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8131 Gigabit Ethernet [1969:1063] (rev c0)
Subsystem: Gigabyte Technology Co., Ltd GA-G31M-ES2L Motherboard [1458:e000]
Kernel driver in use: atl1c

##### lsusb #############################

Bus 001 Device 006: ID 2357:0109  
Bus 001 Device 003: ID 04b4:6560 Cypress Semiconductor Corp. CY7C65640 USB-2.0 "TetraHub"
Bus 001 Device 002: ID 0424:2228 Standard Microsystems Corp. 9-in-2 Card Reader
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 002: ID 1bcf:0005 Sunplus Innovation Technology Inc. Optical Mouse
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

##### PCMCIA card info ##################

##### rfkill ############################

1: phy1: Wireless LAN
Soft blocked: no
Hard blocked: no

##### secure boot #######################

'mokutil' is not installed (package "mokutil").

##### lsmod #############################

rtl8xxxu              122880  0
mac80211              786432  1 rtl8xxxu
cfg80211              634880  1 mac80211
mxm_wmi                16384  1 nouveau
wmi                    24576  2 mxm_wmi,nouveau

##### interfaces ########################

[/etc/network/interfaces]
auto lo
iface lo inet loopback

##### ifconfig ##########################

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback <MAC address> brd <MAC address>
    inet 127.0.0.1/8 scope host lo
      valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
      valid_lft forever preferred_lft forever
2: enp3s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel state DOWN group default qlen 1000
    link/ether <MAC 'enp3s0' [IF1]> brd <MAC address>
4: wlx<IF from MAC [IF2]>: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
    link/ether <MAC 'wlx<IF from MAC [IF2]>' [IF2]> brd <MAC address>
    inet 192.168.8.103/24 brd 192.168.8.255 scope global dynamic noprefixroute wlx<IF from MAC [IF2]>
      valid_lft 86362sec preferred_lft 86362sec
    inet6 fe80::adeb:55e1:ab3:3e3f/64 scope link noprefixroute
      valid_lft forever preferred_lft forever

##### iwconfig ##########################

lo        no wireless extensions.

enp3s0    no wireless extensions.

wlx<IF from MAC [IF2]>  IEEE 802.11  ESSID:"wsk"  
          Mode:Managed  Frequency:2.432 GHz  Access Point: <MAC 'wsk' [AC1]>  
          Bit Rate=1 Mb/s  Tx-Power=20 dBm  
          Retry short limit:7  RTS thr=2347 B  Fragment thr:off
          Power Management:off
          Link Quality=24/70  Signal level=-86 dBm  
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:12  Missed beacon:0

##### route #############################

default via 192.168.8.1 dev wlx<IF from MAC [IF2]> proto dhcp metric 600
169.254.0.0/16 dev wlx<IF from MAC [IF2]> scope link metric 1000
192.168.8.0/24 dev wlx<IF from MAC [IF2]> proto kernel scope link src 192.168.8.103 metric 600

##### resolv.conf #######################

[777 root '/etc/resolv.conf' -> '../run/systemd/resolve/stub-resolv.conf']

nameserver 127.0.0.53
options edns0

##### network managers ##################

Installed:

NetworkManager

Running:

root      665    1  0 08:51 ?        00:00:00 /usr/sbin/NetworkManager --no-daemon

##### NetworkManager info ###############

GENERAL.DEVICE:                        wlx<IF from MAC [IF2]>
GENERAL.TYPE:                          wifi
GENERAL.NM-TYPE:                        NMDeviceWifi
GENERAL.VENDOR:                        Realtek
GENERAL.PRODUCT:                        802.11n NIC
GENERAL.DRIVER:                        rtl8xxxu
GENERAL.DRIVER-VERSION:                4.15.0-96-generic
GENERAL.FIRMWARE-VERSION:              N/A
GENERAL.HWADDR:                        <MAC 'wlx<IF from MAC [IF2]>' [IF2]>
GENERAL.MTU:                            1500
GENERAL.STATE:                          100 (connected)
GENERAL.REASON:                        0 (No reason given)
GENERAL.UDI:                            /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7:1.0/net/wlx<IF from MAC [IF2]>
GENERAL.IP-IFACE:                      wlx<IF from MAC [IF2]>
GENERAL.IS-SOFTWARE:                    no
GENERAL.NM-MANAGED:                    yes
GENERAL.AUTOCONNECT:                    yes
GENERAL.FIRMWARE-MISSING:              no
GENERAL.NM-PLUGIN-MISSING:              no
GENERAL.PHYS-PORT-ID:                  --
GENERAL.CONNECTION:                    wsk
GENERAL.CON-UUID:                      31b1ae45-bf05-465d-85dc-a6f4f12a9775
GENERAL.CON-PATH:                      /org/freedesktop/NetworkManager/ActiveConnection/2
GENERAL.METERED:                        no (guessed)
CAPABILITIES.CARRIER-DETECT:            no
CAPABILITIES.SPEED:                    1 Mb/s
CAPABILITIES.IS-SOFTWARE:              no
CAPABILITIES.SRIOV:                    no
WIFI-PROPERTIES.WEP:                    yes
WIFI-PROPERTIES.WPA:                    yes
WIFI-PROPERTIES.WPA2:                  yes
WIFI-PROPERTIES.TKIP:                  yes
WIFI-PROPERTIES.CCMP:                  yes
WIFI-PROPERTIES.AP:                    no
WIFI-PROPERTIES.ADHOC:                  no
WIFI-PROPERTIES.2GHZ:                  yes
WIFI-PROPERTIES.5GHZ:                  no
IP4.ADDRESS[1]:                        192.168.8.103/24
IP4.GATEWAY:                            192.168.8.1
IP4.ROUTE[1]:                          dst = 0.0.0.0/0, nh = 192.168.8.1, mt = 600
IP4.ROUTE[2]:                          dst = 192.168.8.0/24, nh = 0.0.0.0, mt = 600
IP4.ROUTE[3]:                          dst = 169.254.0.0/16, nh = 0.0.0.0, mt = 1000
IP4.DNS[1]:                            192.168.8.1
DHCP4.OPTION[1]:                        network_number = 192.168.8.0
DHCP4.OPTION[2]:                        requested_domain_search = 1
DHCP4.OPTION[3]:                        requested_host_name = 1
DHCP4.OPTION[4]:                        requested_broadcast_address = 1
DHCP4.OPTION[5]:                        requested_domain_name = 1
DHCP4.OPTION[6]:                        requested_rfc3442_classless_static_routes = 1
DHCP4.OPTION[7]:                        requested_time_offset = 1
DHCP4.OPTION[8]:                        expiry = 1587711113
DHCP4.OPTION[9]:                        requested_wpad = 1
DHCP4.OPTION[10]:                      next_server = 0.0.0.0
DHCP4.OPTION[11]:                      broadcast_address = 192.168.8.255
DHCP4.OPTION[12]:                      requested_interface_mtu = 1
DHCP4.OPTION[13]:                      requested_subnet_mask = 1
DHCP4.OPTION[14]:                      dhcp_lease_time = 86400
DHCP4.OPTION[15]:                      ip_address = 192.168.8.103
DHCP4.OPTION[16]:                      requested_static_routes = 1
DHCP4.OPTION[17]:                      requested_domain_name_servers = 1
DHCP4.OPTION[18]:                      dhcp_renewal_time = 43200
DHCP4.OPTION[19]:                      routers = 192.168.8.1
DHCP4.OPTION[20]:                      requested_netbios_scope = 1
DHCP4.OPTION[21]:                      requested_ntp_servers = 1
DHCP4.OPTION[22]:                      requested_netbios_name_servers = 1
DHCP4.OPTION[23]:                      domain_name_servers = 192.168.8.1 192.168.8.1
DHCP4.OPTION[24]:                      requested_routers = 1
DHCP4.OPTION[25]:                      requested_ms_classless_static_routes = 1
DHCP4.OPTION[26]:                      dhcp_message_type = 5
DHCP4.OPTION[27]:                      dhcp_rebinding_time = 75600
DHCP4.OPTION[28]:                      dhcp_server_identifier = 192.168.8.1
DHCP4.OPTION[29]:                      subnet_mask = 255.255.255.0
IP6.ADDRESS[1]:                        fe80::adeb:55e1:ab3:3e3f/64
IP6.GATEWAY:                            --
IP6.ROUTE[1]:                          dst = ff00::/8, nh = ::, mt = 256, table=255
IP6.ROUTE[2]:                          dst = fe80::/64, nh = ::, mt = 256
IP6.ROUTE[3]:                          dst = fe80::/64, nh = ::, mt = 600
CONNECTIONS.AVAILABLE-CONNECTION-PATHS: /org/freedesktop/NetworkManager/Settings/{1}
CONNECTIONS.AVAILABLE-CONNECTIONS[1]:  31b1ae45-bf05-465d-85dc-a6f4f12a9775 | wsk

GENERAL.DEVICE:                        enp3s0
GENERAL.TYPE:                          ethernet
GENERAL.NM-TYPE:                        NMDeviceEthernet
GENERAL.VENDOR:                        Qualcomm Atheros
GENERAL.PRODUCT:                        AR8131 Gigabit Ethernet (GA-G31M-ES2L Motherboard)
GENERAL.DRIVER:                        atl1c
GENERAL.DRIVER-VERSION:                1.0.1.1-NAPI
GENERAL.FIRMWARE-VERSION:              --
GENERAL.HWADDR:                        <MAC 'enp3s0' [IF1]>
GENERAL.MTU:                            1500
GENERAL.STATE:                          20 (unavailable)
GENERAL.REASON:                        2 (Device is now managed)
GENERAL.UDI:                            /sys/devices/pci0000:00/0000:00:1c.1/0000:03:00.0/net/enp3s0
GENERAL.IP-IFACE:                      --
GENERAL.IS-SOFTWARE:                    no
GENERAL.NM-MANAGED:                    yes
GENERAL.AUTOCONNECT:                    yes
GENERAL.FIRMWARE-MISSING:              no
GENERAL.NM-PLUGIN-MISSING:              no
GENERAL.PHYS-PORT-ID:                  --
GENERAL.CONNECTION:                    --
GENERAL.CON-UUID:                      --
GENERAL.CON-PATH:                      --
GENERAL.METERED:                        unknown
CAPABILITIES.CARRIER-DETECT:            yes
CAPABILITIES.SPEED:                    unknown
CAPABILITIES.IS-SOFTWARE:              no
CAPABILITIES.SRIOV:                    no
WIRED-PROPERTIES.CARRIER:              off
CONNECTIONS.AVAILABLE-CONNECTION-PATHS: --

SSID  BSSID              MODE  CHAN  FREQ      RATE        SIGNAL  BARS  SECURITY  ACTIVE  IN-USE
Redmi  <MAC 'Redmi' [AC2]>  Infra  1    2412 MHz  65 Mbit/s  34      ▂▄__  --        no            
wsk    <MAC 'wsk' [AC1]>  Infra  5    2432 MHz  270 Mbit/s  32      ▂▄__  WPA2      yes    *      

##### NetworkManager.state ##############

[main]
NetworkingEnabled=true
WirelessEnabled=true
WWANEnabled=true

##### NetworkManager config #############

[[/etc/NetworkManager/conf.d/default-wifi-powersave-on.conf]]
[connection]
wifi.powersave = 3

[[/etc/NetworkManager/NetworkManager.conf]]
[main]
plugins=ifupdown,keyfile
[ifupdown]
managed=false
[device]
wifi.scan-rand-mac-address=no

[[/usr/lib/NetworkManager/conf.d/10-dns-resolved.conf]]
[main]
dns=systemd-resolved

[[/usr/lib/NetworkManager/conf.d/10-globally-managed-devices.conf]]
[keyfile]
unmanaged-devices=*,except:type:wifi,except:type:wwan

[[/usr/lib/NetworkManager/conf.d/20-connectivity-ubuntu.conf]]
[connectivity]
uri=http://connectivity-check.ubuntu.com/

[[/usr/lib/NetworkManager/conf.d/no-mac-addr-change.conf]]
[device-mac-addr-change-wifi]
match-device=driver:rtl8723bs,driver:rtl8189es,driver:r8188eu,driver:8188eu,driver:eagle_sdio,driver:wl
wifi.scan-rand-mac-address=no
wifi.cloned-mac-address=preserve
ethernet.cloned-mac-address=preserve

##### NetworkManager profiles ###########

[[/etc/NetworkManager/system-connections/wsk]] (600 root)
[connection] id=wsk | type=wifi | permissions=user:ppp:;
[wifi] mac-address=<MAC 'wlx<IF from MAC [IF2]>' [IF2]> | mac-address-blacklist= | ssid=wsk
[ipv4] method=auto
[ipv6] method=auto

##### Netplan config ####################

[/etc/netplan/1-network-manager-all.yaml]
network:
  version: 2
  renderer: NetworkManager

##### iw reg get ########################

Region: Europe/Warsaw (based on set time zone)

global
country 00: DFS-UNSET
(2402 - 2472 @ 40), (N/A, 20), (N/A)
(2457 - 2482 @ 20), (N/A, 20), (N/A), AUTO-BW, PASSIVE-SCAN
(2474 - 2494 @ 20), (N/A, 20), (N/A), NO-OFDM, PASSIVE-SCAN
(5170 - 5250 @ 80), (N/A, 20), (N/A), AUTO-BW, PASSIVE-SCAN
(5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS, AUTO-BW, PASSIVE-SCAN
(5490 - 5730 @ 160), (N/A, 20), (0 ms), DFS, PASSIVE-SCAN
(5735 - 5835 @ 80), (N/A, 20), (N/A), PASSIVE-SCAN
(57240 - 63720 @ 2160), (N/A, 0), (N/A)

##### iwlist channels ###################

lo        no frequency information.

enp3s0    no frequency information.

wlx<IF from MAC [IF2]>  14 channels in total; available frequencies :
          Channel 01 : 2.412 GHz
          Channel 02 : 2.417 GHz
          Channel 03 : 2.422 GHz
          Channel 04 : 2.427 GHz
          Channel 05 : 2.432 GHz
          Channel 06 : 2.437 GHz
          Channel 07 : 2.442 GHz
          Channel 08 : 2.447 GHz
          Channel 09 : 2.452 GHz
          Channel 10 : 2.457 GHz
          Channel 11 : 2.462 GHz
          Channel 12 : 2.467 GHz
          Channel 13 : 2.472 GHz
          Channel 14 : 2.484 GHz
          Current Frequency:2.432 GHz (Channel 5)

##### iwlist scan #######################

lo        Interface doesn't support scanning.

enp3s0    Interface doesn't support scanning.

Channel occupancy:

      1  APs on  Frequency:2.412 GHz (Channel 1)
      1  APs on  Frequency:2.432 GHz (Channel 5)

wlx<IF from MAC [IF2]>  Scan completed :
          Cell 01 - Address: <MAC 'wsk' [AC1]>
                    Channel:5
                    Frequency:2.432 GHz (Channel 5)
                    Quality=22/70  Signal level=-88 dBm  
                    Encryption key:on
                    ESSID:"wsk"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
                              24 Mb/s; 36 Mb/s; 54 Mb/s
                    Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s
                    Mode:Master
                    Extra:tsf=000000476869cf73
                    Extra: Last beacon: 28ms ago
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : CCMP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK
          Cell 02 - Address: <MAC 'Redmi' [AC2]>
                    Channel:1
                    Frequency:2.412 GHz (Channel 1)
                    Quality=28/70  Signal level=-82 dBm  
                    Encryption key:off
                    ESSID:"Redmi"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s
                    Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s
                              36 Mb/s; 48 Mb/s; 54 Mb/s
                    Mode:Master
                    Extra:tsf=000000002006f233
                    Extra: Last beacon: 32ms ago

##### module infos ######################

[rtl8xxxu]
filename:      /lib/modules/4.15.0-96-generic/kernel/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.ko
firmware:      rtlwifi/rtl8723bu_bt.bin
firmware:      rtlwifi/rtl8723bu_nic.bin
firmware:      rtlwifi/rtl8192eu_nic.bin
firmware:      rtlwifi/rtl8192cufw_TMSC.bin
firmware:      rtlwifi/rtl8192cufw_B.bin
firmware:      rtlwifi/rtl8192cufw_A.bin
firmware:      rtlwifi/rtl8723aufw_B_NoBT.bin
firmware:      rtlwifi/rtl8723aufw_B.bin
firmware:      rtlwifi/rtl8723aufw_A.bin
license:        GPL
description:    RTL8XXXu USB mac80211 Wireless LAN Driver
author:        Jes Sorensen <[email protected]>
srcversion:    559CC993CAAED2B1789F4CF
depends:        mac80211
retpoline:      Y
intree:        Y
name:          rtl8xxxu
vermagic:      4.15.0-96-generic SMP mod_unload
signat:        PKCS#7
signer:        
sig_key:        
sig_hashalgo:  md4
parm:          debug:Set debug mask (int)
parm:          ht40_2g:Enable HT40 support on the 2.4GHz band (bool)
parm:          dma_aggregation:Enable DMA packet aggregation (bool)
parm:          dma_agg_timeout:Set DMA aggregation timeout (range 1-127) (int)
parm:          dma_agg_pages:Set DMA aggregation pages (range 1-127, 0 to disable) (int)

[mac80211]
filename:      /lib/modules/4.15.0-96-generic/kernel/net/mac80211/mac80211.ko
license:        GPL
description:    IEEE 802.11 subsystem
srcversion:    E91E6F217E202F31AADED53
depends:        cfg80211
retpoline:      Y
intree:        Y
name:          mac80211
vermagic:      4.15.0-96-generic SMP mod_unload
signat:        PKCS#7
signer:        
sig_key:        
sig_hashalgo:  md4
parm:          minstrel_vht_only:Use only VHT rates when VHT is supported by sta. (bool)
parm:          max_nullfunc_tries:Maximum nullfunc tx tries before disconnecting (reason 4). (int)
parm:          max_probe_tries:Maximum probe tries before disconnecting (reason 4). (int)
parm:          beacon_loss_count:Number of beacon intervals before we decide beacon was lost. (int)
parm:          probe_wait_ms:Maximum time(ms) to wait for probe response before disconnecting (reason 4). (int)
parm:          ieee80211_default_rc_algo:Default rate control algorithm for mac80211 to use (charp)

[cfg80211]
filename:      /lib/modules/4.15.0-96-generic/kernel/net/wireless/cfg80211.ko
description:    wireless configuration support
license:        GPL
author:        Johannes Berg
srcversion:    E59180B39A14C88983A9687
depends:        
retpoline:      Y
intree:        Y
name:          cfg80211
vermagic:      4.15.0-96-generic SMP mod_unload
signat:        PKCS#7
signer:        
sig_key:        
sig_hashalgo:  md4
parm:          bss_entries_limit:limit to number of scan BSS entries (per wiphy, default 1000) (int)
parm:          ieee80211_regdom:IEEE 802.11 regulatory domain code (charp)
parm:          cfg80211_disable_40mhz_24ghz:Disable 40MHz support in the 2.4GHz band (bool)

##### module parameters #################

grep: /sys/module/rtl8xxxu/parameters/debug: Permission denied
grep: /sys/module/rtl8xxxu/parameters/dma_agg_pages: Permission denied
grep: /sys/module/rtl8xxxu/parameters/dma_aggregation: Permission denied
grep: /sys/module/rtl8xxxu/parameters/dma_agg_timeout: Permission denied
grep: /sys/module/rtl8xxxu/parameters/ht40_2g: Permission denied
[rtl8xxxu]

[mac80211]
beacon_loss_count: 7
ieee80211_default_rc_algo: minstrel_ht
max_nullfunc_tries: 2
max_probe_tries: 5
minstrel_vht_only: Y
probe_wait_ms: 500

[cfg80211]
bss_entries_limit: 1000
cfg80211_disable_40mhz_24ghz: N
ieee80211_regdom: 00

##### /etc/modules ######################

##### modprobe options ##################

[/etc/modprobe.d/amd64-microcode-blacklist.conf]
blacklist microcode

[/etc/modprobe.d/blacklist-ath_pci.conf]
blacklist ath_pci

[/etc/modprobe.d/blacklist.conf]
blacklist evbug
blacklist usbmouse
blacklist usbkbd
blacklist eepro100
blacklist de4x5
blacklist eth1394
blacklist snd_intel8x0m
blacklist snd_aw2
blacklist i2c_i801
blacklist prism54
blacklist bcm43xx
blacklist garmin_gps
blacklist asus_acpi
blacklist snd_pcsp
blacklist pcspkr
blacklist amd76x_edac

[/etc/modprobe.d/blacklist-rare-network.conf]
alias net-pf-3 off
alias net-pf-6 off
alias net-pf-9 off
alias net-pf-11 off
alias net-pf-12 off
alias net-pf-19 off
alias net-pf-21 off
alias net-pf-36 off

[/etc/modprobe.d/intel-microcode-blacklist.conf]
blacklist microcode

[/etc/modprobe.d/iwlwifi.conf]
remove iwlwifi \
(/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod) \
&& /sbin/modprobe -r mac80211

##### rc.local ##########################

grep: /etc/rc.local: No such file or directory

##### pm-utils ##########################

##### udev rules ########################

##### dmesg #############################

[  29.160474] wlx<IF from MAC [IF2]>: authenticate with <MAC 'wsk' [AC1]>
[  29.188062] wlx<IF from MAC [IF2]>: send auth to <MAC 'wsk' [AC1]> (try 1/3)
[  29.391976] wlx<IF from MAC [IF2]>: send auth to <MAC 'wsk' [AC1]> (try 2/3)
[  29.595960] wlx<IF from MAC [IF2]>: send auth to <MAC 'wsk' [AC1]> (try 3/3)
[  29.800751] wlx<IF from MAC [IF2]>: authentication with <MAC 'wsk' [AC1]> timed out
[  37.846285] usb 1-7: rtl8192eu_active_to_emu: Disabling MAC timed out
[  40.088168] usb 1-7: rtl8192eu_parse_efuse: dumping efuse (0x200 bytes):
[  40.088305] usb 1-7: rtl8xxxu: Loading firmware rtlwifi/rtl8192eu_nic.bin
[  41.296506] rtl8xxxu 1-7:1.0 wlx<IF from MAC [IF2]>: renamed from wlan0
[  41.318508] IPv6: ADDRCONF(NETDEV_UP): wlx<IF from MAC [IF2]>: link is not ready (repeated 3 times)
[  42.620271] wlx<IF from MAC [IF2]>: authenticate with <MAC 'wsk' [AC1]>
[  42.636698] wlx<IF from MAC [IF2]>: send auth to <MAC 'wsk' [AC1]> (try 1/3)
[  42.638328] wlx<IF from MAC [IF2]>: authenticated
[  42.640119] wlx<IF from MAC [IF2]>: associate with <MAC 'wsk' [AC1]> (try 1/3)
[  42.646037] wlx<IF from MAC [IF2]>: RX AssocResp from <MAC 'wsk' [AC1]> (capab=0x11 status=0 aid=1)
[  42.646057] wlx<IF from MAC [IF2]>: AP has invalid WMM params (AIFSN=1 for ACI 0), will use 2
[  42.648785] usb 1-7: rtl8xxxu_bss_info_changed: HT supported
[  42.650298] wlx<IF from MAC [IF2]>: associated
[  44.014834] IPv6: ADDRCONF(NETDEV_CHANGE): wlx<IF from MAC [IF2]>: link becomes ready

########## wireless info END ############

  Otwieranie ruchomych webp
Napisane przez: Gość - 22-04-2020, 18:46 - Forum: Software - Odpowiedzi (12)

Witam

Szukam programu który pozwoli mi przeglądać ruchome obrazy (coś ala gif) w formacie webp. gThumb nie działa, gwenview też, mirage też nie, a imagemagick nawet nie umiem uruchomić.


Big Grin Geolokalizacja
Napisane przez: Blublek - 21-04-2020, 20:47 - Forum: Software - Odpowiedzi (12)

Koledzy, mam problem z którym się męczę. Dlaczego na Linuksie nie mogę włączyć w Firefoxie i Chrome geolokalizacji ?? np. Google maps nie może ustalić mojej pozycji. Dziś zainstalowałem Operę w której działa geolokalizacja.

Google Maps -zrzut ekranu, zarówno Firefox jak i Chrome
[Obrazek: I5D5lTOl.png]


  Darmowy vpn na Linux Mint 19.3 Tricia
Napisane przez: Nicson - 21-04-2020, 15:28 - Forum: Off topic - Odpowiedzi (3)

witam a wiec jak w tytule szukam jakiegoś darmowego Vpn na Linux Mint 19.3 Tricia .


Photo montowanie dysków
Napisane przez: macsim - 20-04-2020, 23:52 - Forum: Przedszkole Linuksa - Odpowiedzi (3)

Na początek witam wszystkich.

Zainstalowałem Linux Mint 19.3 na dysku M.2, w komputerze mam jeszcze drugi dysk SATA HD oraz podłączony dysk zewnętrzny.    

Po kliknięciu w ikonkę dysku z systemem (M.2) na pulpicie dysk się nie otwiera tylko wyświetla komunikat: "zamontowanie położenia nie jest możliwe". Do tego dysku natomiast normalnie wchodzę przez katalog domowy.

Po kliknięciu na pulpicie w ikonę drugiego dysku HD (nazwany 250HD) z danymi pojawia się komunikat: "plik 250HD1 nie jest skojarzony z żadną aplikacją. Użyj opcji otwórz za pomocą, aby powiązać ten typ pliku z programem". Aby dostać się do zawartości tego dysku muszę go w katalogu domowym odmontować.

I tak się dzieje po każdym uruchomieniu komputera. Co zrobiłem nie tak?



Załączone pliki Miniatury
   

  Szybszy start Minta
Napisane przez: omkar - 20-04-2020, 19:22 - Forum: Ciekawe sztuczki - Odpowiedzi (10)

Windows  10 posiada opcję "szybki start", która polega na hibernacji jądra systemu i sterowników. To rozwiązanie posiada swoje dobre i złe strony, ale znacząco przyśpiesza start komputera.

Linux nie posiada takiej opcji i na wolniejszych komputerach, szczególnie z dyskami talerzowymi, może startować nawet kilka minut. Można jednak ten start znacząco skrócić.

Najpierw należy sprawdzić które procesy najbardziej spowalniają start. W terminalu wpisujemy: 

Kod:
systemd-analyze blame

Jak się okazuje proces apt-daily.service spowalnia system na wolniejszych komputerach o prawie 53 sekundy. Ta usługa odpowiada za automatyzację kilku procesów związanych z apt. Jeżeli komuś zależy na tych 53 sekundach, to z powodzeniem można się pozbyć tej usługi:

Kod:
sudo systemctl stop apt-daily.timer
sudo systemctl disable apt-daily.timer
sudo systemctl mask apt-daily.service
sudo systemctl daemon-reload

Nie zauważyłem żadnych niedogodności po jej wyłączeniu w Mincie 19.3.
W Mincie 20 ta usługa już nie uruchamia się wraz z systemem, więc nie ma problemu.

Drugi czasochłonny proces (około 12 s na wolnym sprzęcie), który również możemy wyłączyć, to ModemManager.service, odpowiadający za działanie modemów (2G / 3G / 4G). Jeśli nie używamy takich modemów, to wyłączamy ten proces:

Kod:
sudo systemctl stop modemmanager.service
sudo systemctl disable modemmanager.service

Teraz komputer będzie startować, nawet o ponad minutę szybciej.


  Compal FL90 zakłócenia na obrazie
Napisane przez: Gość - 19-04-2020, 22:30 - Forum: Sprzęt i sterowniki - Brak odpowiedzi

Mam laptop Compal FL90 w którym spaliła się karta nVidia i została zastąpiona kartą ATI mobility radeon 3650.
Laptop działał do tej pory bez zarzutu na Windows XP. Postanowiłem zainstalować na nim Linuxa i niestety jest dziwny problem z falującym obrazem. Wygląda to jak zakłócenia na starej analogowej telewizji. Obraz śnieży i przesuwają się pasy. Testowo próbowałem też inne dystrybucje i za każdym razem problem jest podobny. Ponieważ na Windows XP nie było żadnych problemów to na pewno sprzęt jest sprawny, to musi być jakiś problem programowy.

Kod:
user@compal:~$ inxi -SMCGx
System:    Host: compal Kernel: 5.3.0-45-generic x86_64 bits: 64 compiler: gcc v: 7.5.0 Desktop: MATE 1.22.2
           Distro: Linux Mint 19.3 Tricia base: Ubuntu 18.04 bionic
Machine:   Type: Laptop System: - product: N/A v: N/A serial: <root required>
           Mobo: - model: IFL90 v: IFT00 serial: <root required> BIOS: COMPAL v: 1.18 date: 06/18/2008
CPU:       Topology: Dual Core model: Intel Core2 Duo T7500 bits: 64 type: MCP arch: Core Merom rev: B
           L2 cache: 4096 KiB
           flags: lm nx pae sse sse2 sse3 ssse3 vmx bogomips: 8777
           Speed: 798 MHz min/max: 800/2201 MHz Core speeds (MHz): 1: 798 2: 798
Graphics:  Device-1: Advanced Micro Devices [AMD/ATI] RV635/M86 [Mobility Radeon HD 3650] driver: radeon v: kernel
           bus ID: 01:00.0
           Display: x11 server: X.Org 1.19.6 driver: ati,radeon unloaded: fbdev,modesetting,vesa
           resolution: 1280x800~60Hz
           OpenGL: renderer: AMD RV635 (DRM 2.50.0 / 5.3.0-45-generic LLVM 9.0.0) v: 3.3 Mesa 19.2.8
           direct render: Yes
Kod:
user@compal:~$ xrandr --verbose
Screen 0: minimum 320 x 200, current 1280 x 800, maximum 8192 x 8192
LVDS connected primary 1280x800+0+0 (0x56) normal (normal left inverted right x axis y axis) 331mm x 207mm
Identifier: 0x51
Timestamp:  524280
Subpixel:   horizontal rgb
Gamma:      1.0:1.0:1.0
Brightness: 1.0
Clones:   
CRTC:       0
CRTCs:      0 1
Transform:  1.000000 0.000000 0.000000
            0.000000 1.000000 0.000000
            0.000000 0.000000 1.000000
           filter:
EDID:
00ffffffffffff000e14011400000000
26110103802115780a743d9857518f28
21505400000001010101010101010101
010101010101ea1a0080502010302020
13004bcf100000190000000f00202020
2020202020206e050f00000000fe0043
50540a202020202020202020000000fe
00434c4141313534574230334120004f
TearFree: auto
supported: off, on, auto
scaling mode: Full
supported: None, Full, Center, Full aspect
non-desktop: 0
range: (0, 1)
link-status: Good
supported: Good, Bad
  1280x800 (0x56) 68.900MHz -HSync -VSync *current +preferred
        h: width  1280 start 1312 end 1344 total 1408 skew    0 clock  48.93KHz
        v: height  800 start  801 end  804 total  816           clock  59.97Hz
  1280x720 (0x57) 74.648MHz -HSync +VSync
        h: width  1280 start 1344 end 1472 total 1664 skew    0 clock  44.86KHz
        v: height  720 start  723 end  728 total  748           clock  59.97Hz
  1152x768 (0x58) 71.951MHz -HSync +VSync
        h: width  1152 start 1216 end 1328 total 1504 skew    0 clock  47.84KHz
        v: height  768 start  771 end  781 total  798           clock  59.95Hz
  1024x768 (0x59) 63.531MHz -HSync +VSync
        h: width  1024 start 1072 end 1176 total 1328 skew    0 clock  47.84KHz
        v: height  768 start  771 end  775 total  798           clock  59.95Hz
  800x600 (0x5a) 38.313MHz -HSync +VSync
        h: width   800 start  832 end  912 total 1024 skew    0 clock  37.42KHz
        v: height  600 start  603 end  607 total  624           clock  59.96Hz
  848x480 (0x5b) 31.648MHz -HSync +VSync
        h: width   848 start  872 end  952 total 1056 skew    0 clock  29.97KHz
        v: height  480 start  483 end  493 total  500           clock  59.94Hz
  720x480 (0x5c) 26.852MHz -HSync +VSync
        h: width   720 start  744 end  808 total  896 skew    0 clock  29.97KHz
        v: height  480 start  483 end  493 total  500           clock  59.94Hz
  640x480 (0x5d) 23.975MHz -HSync +VSync
        h: width   640 start  664 end  720 total  800 skew    0 clock  29.97KHz
        v: height  480 start  483 end  487 total  500           clock  59.94Hz
VGA-0 disconnected (normal left inverted right x axis y axis)
Identifier: 0x52
Timestamp:  524280
Subpixel:   no subpixels
Clones:   
CRTCs:      0 1
Transform:  1.000000 0.000000 0.000000
            0.000000 1.000000 0.000000
            0.000000 0.000000 1.000000
           filter:
TearFree: auto
supported: off, on, auto
scaling mode: None
supported: None, Full, Center, Full aspect
load detection: 1
range: (0, 1)
non-desktop: 0
range: (0, 1)
link-status: Good
supported: Good, Bad
HDMI-0 disconnected (normal left inverted right x axis y axis)
Identifier: 0x53
Timestamp:  524280
Subpixel:   horizontal rgb
Clones:   
CRTCs:      0 1
Transform:  1.000000 0.000000 0.000000
            0.000000 1.000000 0.000000
            0.000000 0.000000 1.000000
           filter:
TearFree: auto
supported: off, on, auto
audio: auto
supported: off, on, auto
scaling mode: None
supported: None, Full, Center, Full aspect
dither: off
supported: off, on
underscan vborder: 0
range: (0, 128)
underscan hborder: 0
range: (0, 128)
underscan: off
supported: off, on, auto
coherent: 1
range: (0, 1)
non-desktop: 0
range: (0, 1)
link-status: Good
supported: Good, Bad
DVI-0 disconnected (normal left inverted right x axis y axis)
Identifier: 0x54
Timestamp:  524280
Subpixel:   horizontal rgb
Clones:   
CRTCs:      0 1
Transform:  1.000000 0.000000 0.000000
            0.000000 1.000000 0.000000
            0.000000 0.000000 1.000000
           filter:
TearFree: auto
supported: off, on, auto
load detection: 1
range: (0, 1)
audio: auto
supported: off, on, auto
scaling mode: None
supported: None, Full, Center, Full aspect
dither: off
supported: off, on
underscan vborder: 0
range: (0, 128)
underscan hborder: 0
range: (0, 128)
underscan: off
supported: off, on, auto
coherent: 1
range: (0, 1)
non-desktop: 0
range: (0, 1)
link-status: Good
supported: Good, Bad
user@compal:~$



Załączone pliki Miniatury
                   


  Instalacja Linuxa Mint obok Windows 10
Napisane przez: Gość - 19-04-2020, 20:59 - Forum: Instalacja i uruchamianie - Odpowiedzi (5)

Cześć wszystkim.

Moja sytuacja wygląda  następująco. Mam 2 dyski:

- dysk SSD 250GB, na którym jest zainstalowany Windows 10 

- dysk HDD 2TB z 1 partycją, którą chciałbym zmniejszyć o przestrzeń dla linuxa.

Jak zainstalować linuxa w trybie dual boot z windowsem na dysku 2TB? 

Z tego, co widzę, to opcja instalacji obok windows dostępna w instalatorze tworzy partycje linuxa na dysku Widowsa.

Czy jeśli wybiorę opcję instalacji niestandardowej, to będę mógł tylko kliknąć zainstaluj linuxa na nieprzydzielonym miejscu (a instalator zadba o odpowiednie partycje), czy będę musiał sam tworzyć partycje linuxowe?

Daniel


  wifi działa, a internet po kablu nie działa
Napisane przez: Gość - 19-04-2020, 17:27 - Forum: Sprzęt i sterowniki - Odpowiedzi (25)

Witam wszystkich mam problem ponieważ internet po wifi działa a po kablu już nie. Na windowsie miałem taką samą sytuacje i wystarczyło dograć sterowniki do karty sieciowej. Tylko nie wiem jak to zrobić na linuxie 
laptop to asus
model x52j
wersja k52jc
   
dziękuje za wszelką pomoc

Kod:
Network:
  Device-1: Qualcomm Atheros AR9285 Wireless Network Adapter
  vendor: AzureWave AW-NE785 / AW-NE785H 802.11bgn driver: ath9k v: kernel
  port: d000 bus ID: 03:00.0 chip ID: 168c:002b
  Device-2: JMicron JMC250 PCI Express Gigabit Ethernet vendor: ASUSTeK
  driver: jme v: 1.0.8 port: a000 bus ID: 04:00.5 chip ID: 197b:0250

Ethernet controller [0200]: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller [197b:0250] (rev 03)
Subsystem: ASUSTeK Computer Inc. JMC250 PCI Express Gigabit Ethernet Controller [1043:1905]
Physical Slot: 5
Flags: bus master, fast devsel, latency 0, IRQ 32
Memory at d3800000 (32-bit, non-prefetchable) [size=16K]
I/O ports at a100 [size=128]
I/O ports at a000 [size=256]
Capabilities: <access denied>
Kernel driver in use: jme
Kernel modules: jme
Kod:
0: asus-wwan: Wireless WAN
Soft blocked: no
Hard blocked: no
1: asus-wimax: WiMAX
Soft blocked: no
Hard blocked: no
2: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
Kod:
Bus 002 Device 003: ID 1bcf:0005 Sunplus Innovation Technology Inc. Optical Mouse
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 04f2:b1e5 Chicony Electronics Co., Ltd
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Kod:
ens5f5: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether 20:cf:30:65:7e:ae  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
        device interrupt 32  

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 1621  bytes 143074 (143.0 KB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 1621  bytes 143074 (143.0 KB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

wls1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.0.13  netmask 255.255.255.224  broadcast 192.168.0.31
        inet6 ::9df2:9a72:60a2:95c1  prefixlen 64  scopeid 0x0<global>
        inet6 fe80::ee3b:9bf8:226c:3224  prefixlen 64  scopeid 0x20<link>
        inet6 ::7069:9793:6c88:a  prefixlen 64  scopeid 0x0<global>
        ether 48:5d:60:3b:68:94  txqueuelen 1000  (Ethernet)
        RX packets 8009  bytes 3420821 (3.4 MB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 5720  bytes 935829 (935.8 KB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0



Załączone pliki Miniatury
   

Photo Ikona zakazu/errora przy dysku zewnętrznym
Napisane przez: Gość - 19-04-2020, 13:25 - Forum: Desktop i menadżery okien - Odpowiedzi (6)

Witam serdecznie forumowiczów.

Mam nadzieję, że piszę w odpowiednim dziale. 
Ostatnio kupiłem zewnętrzny dysk SSD. po podłączeniu mam dziwną ikonkę, która z wyglądu sugeruje błąd. 

[Obrazek: XqicgnB.png]

Wszystko działa, kopiuje się i odczytuje, jednak ta ikona nie daje mi spokoju, ponieważ przy innych dyskach zewnętrznych SSD, czy talerzowych, czy przy Pen drive pokazuje normalną ikonkę zewnętrznego urządzenia.
Czy ktoś się spotkał z podobnym problemem?


Pozdrawiam