DVB T2 + Astrometa i Kaffeine

[Gator]

0

Witam i od razu opisuję problem:
Na początku miałem Mint 18.3 + tuner TV Omega  i Kaffeine.
Wszystko działało dobrze, ale po zmianie systemu TV na DVB T2 zostało mi 5 programów i pora zmienić na nowszy tuner.
Kupiłem Tuner cyfrowy usb DVB T2 h-265 hevc Rebel (astrometa), wszystkomający, i próbowałem go uruchomić. 
Bez powodzenia.
Sprzęt został znaleziony, ale Kaffeine nawet nie próbowała wyszukać kanałów. 
W_scan również niczego nie znalazł.
Z sieci dowiedziałem się, że mój kernel nie zawiera sterowników do tego tunera, więc zainstalowałem na innym laptopie Mint 20.2 +   z jądrem 5.4.0-120 generic.
Teraz Kaffeine zaczął przeszukiwać pasmo, i nawet było widoczne, że coś znajdował. Antena dosyć dobra i siła sygnału bliska 100%.
Niestety, mimo, że znajdował sygnał (widoczne na pasku Sygnał i SNR) to nie zapisał żadnego znalezionego kanału.

To samo dzieje się z w_scan, przeszukuje ale niczego nie znajduje.

Podejrzewam, ze brak jakiegoś sterownika, ale przeszukiwania sieci niczego nie dały. Wszyscy po uruchomieniu takiego zestawu odbierają telewizję bez problemu.

Pyt. 1  Co może być przyczyną, że Kaffeine nie zapisuje kanałów?
Pyt. 2  Czy jest jakiś inny sposób na oodbiór DVB T2, najlepiej z Mint 18.3?

[dedito]

0

Wrzuć wyniki lsusb i dmesg.

[Gator]

0

Kod:

irena@irena-HP-255-G1-Notebook-PC:~$ lsusb
Bus 002 Device 002: ID 04f2:b34f Chicony Electronics Co., Ltd HP Truevision HD
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 003: ID 0cf3:3121 Qualcomm Atheros Communications
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 008: ID 15f4:0131 HanfTek dvbt2
Bus 001 Device 007: ID 058f:6387 Alcor Micro Corp. Flash Drive
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 003: ID 062a:4101 MosArt Semiconductor Corp. Wireless Keyboard/Mouse
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

---

Dodano po pewnym czasie:
irena@irena-HP-255-G1-Notebook-PC:~$ dmesg
[    0.000000] Linux version 5.4.0-121-generic (buildd@lcy02-amd64-013) (gcc version 9.4.0 (Ubuntu 9.4.0-1ubuntu1~20.04.1)) #137-Ubuntu SMP Wed Jun 15 13:33:07 UTC 2022 (Ubuntu 5.4.0-121.137-generic 5.4.189)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-121-generic root=UUID=ae680bad-a508-4e34-961c-48fde03c05bc ro quiet splash
[    0.000000] KERNEL supported cpus:
[    0.000000]  Intel GenuineIntel
[    0.000000]  AMD AuthenticAMD
[    0.000000]  Hygon HygonGenuine
[    0.000000]  Centaur CentaurHauls
[    0.000000]  zhaoxin  Shanghai 
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 
[    4.765127] ata1.00: ATA-8: WDC WD5000LPVT-80G33T2, 01.01A01, max UDMA/133
[    4.765138] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    4.767198] ata1.00: configured for UDMA/133
[    4.767917] scsi 0:0:0:0: Direct-Access    ATA      WDC WD5000LPVT-8 1A01 PQ: 0 ANSI: 5
[    4.768370] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    4.768415] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    4.768504] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    4.768549] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[    4.768975] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    4.768979] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    4.769012] sd 0:0:0:0: [sda] Write Protect is off
[    4.769016] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.769071] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.775290] scsi 1:0:0:0: CD-ROM            hp      CDDVDW SN-208DB  HH01 PQ: 0 ANSI: 5
[    4.840689]  sda: sda1 sda2
[    4.851349] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    4.851357] cdrom: Uniform CD-ROM driver Revision: 3.20
[    4.860349] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.883182] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    4.883473] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    4.906851] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl, a0:d3:c1:96:5e:b9, XID 2c9, IRQ 30
[    4.906858] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    4.916322] r8169 0000:03:00.0 eno1: renamed from eth0
[    4.926577] psmouse serio1: synaptics: queried max coordinates: x [..5734], y [..4974]
[    4.953279] psmouse serio1: synaptics: queried min coordinates: x [1222..], y [910..]
[    4.990567] [drm] radeon kernel modesetting enabled.
[    4.990691] radeon 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 0: 0xe0000000 -> 0xefffffff
[    4.990696] radeon 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 2: 0xf0400000 -> 0xf043ffff
[    4.990700] checking generic (e0000000 420000) vs hw (e0000000 10000000)
[    4.990702] fb0: switching to radeondrmfb from EFI VGA
[    4.991165] Console: switching to colour dummy device 80x25
[    4.991278] radeon 0000:00:01.0: vgaarb: deactivate vga console
[    4.992477] [drm] initializing kernel modesetting (PALM 0x1002:0x9809 0x103C:0x188B 0x00).
[    4.992553] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000c3fff window]
[    4.992561] caller pci_map_rom+0x71/0x1a0 mapping multiple BARs
[    4.994127] ATOM BIOS: HP
[    4.994263] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
[    4.994268] radeon 0000:00:01.0: GTT: 1024M 0x0000000018000000 - 0x0000000057FFFFFF
[    4.994277] [drm] Detected VRAM RAM=384M, BAR=256M
[    4.994279] [drm] RAM width 32bits DDR
[    4.994627] [TTM] Zone  kernel: Available graphics memory: 1804240 KiB
[    4.994631] [TTM] Initializing pool allocator
[    4.994642] [TTM] Initializing DMA pool allocator
[    4.994705] [drm] radeon: 384M of VRAM memory ready
[    4.994708] [drm] radeon: 1024M of GTT memory ready.
[    4.994743] [drm] Loading PALM Microcode
[    4.995008] [drm] Internal thermal controller without fan control
[    4.995126] [drm] Found smc ucode version: 0x00010601
[    4.995202] [drm] radeon: dpm initialized
[    4.995593] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    5.008021] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xf00173/0x240000/0xa2400/0x0, board id: 2068, fw id: 1028260
[    5.024625] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
[    5.024856] radeon 0000:00:01.0: WB enabled
[    5.024864] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0x(____ptrval____)
[    5.024868] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0x(____ptrval____)
[    5.025330] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0x(____ptrval____)
[    5.025334] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    5.025336] [drm] Driver supports precise vblank timestamp query.
[    5.025339] radeon 0000:00:01.0: radeon: MSI limited to 32-bit
[    5.025447] radeon 0000:00:01.0: radeon: using MSI.
[    5.025490] [drm] radeon: irq initialized.
[    5.041310] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[    5.042815] [drm] ring test on 0 succeeded in 1 usecs
[    5.042828] [drm] ring test on 3 succeeded in 3 usecs
[    5.088599] [drm] ring test on 5 succeeded in 1 usecs
[    5.108465] [drm] UVD initialized successfully.
[    5.109438] [drm] ib test on ring 0 succeeded in 0 usecs
[    5.109491] [drm] ib test on ring 3 succeeded in 0 usecs
[    5.655416] [drm] ib test on ring 5 succeeded
[    5.739219] [drm] radeon atom DIG backlight initialized
[    5.739229] [drm] Radeon Display Connectors
[    5.739233] [drm] Connector 0:
[    5.739236] [drm]  LVDS-1
[    5.739237] [drm]  HPD1
[    5.739240] [drm]  DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[    5.739242] [drm]  Encoders:
[    5.739243] [drm]    LCD1: INTERNAL_UNIPHY
[    5.739245] [drm] Connector 1:
[    5.739246] [drm]  HDMI-A-1
[    5.739247] [drm]  HPD2
[    5.739250] [drm]  DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[    5.739251] [drm]  Encoders:
[    5.739252] [drm]    DFP1: INTERNAL_UNIPHY
[    5.739254] [drm] Connector 2:
[    5.739255] [drm]  VGA-1
[    5.739258] [drm]  DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[    5.739259] [drm]  Encoders:
[    5.739260] [drm]    CRT1: INTERNAL_KLDSCP_DAC1
[    6.173318] [drm] fb mappable at 0xE0366000
[    6.173322] [drm] vram apper at 0xE0000000
[    6.173324] [drm] size 4325376
[    6.173326] [drm] fb depth is 24
[    6.173327] [drm]    pitch is 5632
[    6.173872] fbcon: radeondrmfb (fb0) is primary device
[    6.753332] Console: switching to colour frame buffer device 170x48
[    6.760529] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[    6.777340] [drm] Initialized radeon 2.50.0 20080528 for 0000:00:01.0 on minor 0
[    7.535006] raid6: sse2x4  gen()  1391 MB/s
[    7.582959] raid6: sse2x4  xor()  1061 MB/s
[    7.630947] raid6: sse2x2  gen()  985 MB/s
[    7.678951] raid6: sse2x2  xor()  1153 MB/s
[    7.726993] raid6: sse2x1  gen()  985 MB/s
[    7.774955] raid6: sse2x1  xor()  946 MB/s
[    7.774957] raid6: using algorithm sse2x4 gen() 1391 MB/s
[    7.774958] raid6: .... xor() 1061 MB/s, rmw enabled
[    7.774961] raid6: using ssse3x2 recovery algorithm
[    7.786919] xor: measuring software checksum speed
[    7.822945]    prefetch64-sse:  3241.000 MB/sec
[    7.862942]    generic_sse:  3025.000 MB/sec
[    7.862945] xor: using function: prefetch64-sse (3241.000 MB/sec)
[    7.930685] Btrfs loaded, crc32c=crc32c-generic
[    8.622580] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    9.916101] crng init done
[    9.916108] random: 7 urandom warning(s) missed due to ratelimiting
[  11.121065] systemd[1]: Inserted module 'autofs4'
[  14.158460] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[  14.175508] systemd[1]: Detected architecture x86-64.
[  14.222154] systemd[1]: Set hostname to <irena-HP-255-G1-Notebook-PC>.
[  18.730681] systemd[1]: Created slice system-modprobe.slice.
[  18.732230] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[  18.733543] systemd[1]: Created slice User and Session Slice.
[  18.733787] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[  18.734440] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[  18.734593] systemd[1]: Reached target User and Group Name Lookups.
[  18.734651] systemd[1]: Reached target Remote File Systems.
[  18.734688] systemd[1]: Reached target Slices.
[  18.735089] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[  18.735458] systemd[1]: Listening on LVM2 poll daemon socket.
[  18.735701] systemd[1]: Listening on Syslog Socket.
[  18.740455] systemd[1]: Listening on Process Core Dump Socket.
[  18.740816] systemd[1]: Listening on fsck to fsckd communication Socket.
[  18.741002] systemd[1]: Listening on initctl Compatibility Named Pipe.
[  18.741580] systemd[1]: Listening on Journal Audit Socket.
[  18.741879] systemd[1]: Listening on Journal Socket (/dev/log).
[  18.742225] systemd[1]: Listening on Journal Socket.
[  18.742584] systemd[1]: Listening on udev Control Socket.
[  18.742857] systemd[1]: Listening on udev Kernel Socket.
[  18.747139] systemd[1]: Mounting Huge Pages File System...
[  18.751750] systemd[1]: Mounting POSIX Message Queue File System...
[  18.756818] systemd[1]: Mounting Kernel Debug File System...
[  18.761581] systemd[1]: Mounting Kernel Trace File System...
[  18.774867] systemd[1]: Starting Journal Service...
[  18.781282] systemd[1]: Starting Availability of block devices...
[  18.786520] systemd[1]: Starting Set the console keyboard layout...
[  18.791387] systemd[1]: Starting Create list of static device nodes for the current kernel...
[  18.800666] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[  18.800857] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
[  18.853352] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[  18.853505] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[  19.006187] systemd[1]: Starting Load Kernel Modules...
[  19.010651] systemd[1]: Starting Remount Root and Kernel File Systems...
[  19.015840] systemd[1]: Starting udev Coldplug all Devices...
[  19.021679] systemd[1]: Starting Uncomplicated firewall...
[  19.028660] systemd[1]: Mounted Huge Pages File System.
[  19.029234] systemd[1]: Mounted POSIX Message Queue File System.
[  19.029635] systemd[1]: Mounted Kernel Debug File System.
[  19.030026] systemd[1]: Mounted Kernel Trace File System.
[  19.032199] systemd[1]: Finished Availability of block devices.
[  19.034608] systemd[1]: Finished Create list of static device nodes for the current kernel.
[  19.036897] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[  19.257205] systemd[1]: Finished Uncomplicated firewall.
[  19.476259] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[  19.483276] systemd[1]: Finished Remount Root and Kernel File Systems.
[  19.490095] systemd[1]: Activating swap /swapfile...
[  19.519025] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[  19.519260] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[  19.523134] systemd[1]: Starting Load/Save Random Seed...
[  19.532522] systemd[1]: Starting Create System Users...
[  19.812736] systemd[1]: Finished Set the console keyboard layout.
[  19.891086] Adding 2097148k swap on /swapfile.  Priority:-2 extents:6 across:2260988k FS
[  19.891334] systemd[1]: Activated swap /swapfile.
[  19.891635] systemd[1]: Reached target Swap.
[  20.230652] systemd[1]: Started Journal Service.
[  20.547427] systemd-journald[277]: Received client request to flush runtime journal.
[  20.667559] lp: driver loaded but no devices found
[  20.774085] ppdev: user-space parallel port driver
[  21.094069] IPMI message handler: version 39.2
[  21.115236] ipmi device interface
[  25.220012] input: HP Wireless hotkeys as /devices/virtual/input/input7
[  26.364592] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[  26.365778] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[  26.648865] Bluetooth: Core ver 2.22
[  26.648947] NET: Registered protocol family 31
[  26.648949] Bluetooth: HCI device and connection manager initialized
[  26.648961] Bluetooth: HCI socket layer initialized
[  26.648965] Bluetooth: L2CAP socket layer initialized
[  26.648975] Bluetooth: SCO socket layer initialized
[  26.944527] usbcore: registered new interface driver btusb
[  26.983077] mc: Linux media interface: v0.10
[  27.218169] input: HP WMI hotkeys as /devices/virtual/input/input8
[  27.282857] videodev: Linux video capture interface: v2.00
[  27.303320] usb 4-2: USB disconnect, device number 2
[  27.322663] usbcore: registered new interface driver ath3k
[  27.367394] ath: phy0: WB335 1-ANT card detected
[  27.367400] ath: phy0: Set BT/WLAN RX diversity capability
[  27.379455] ath: phy0: Enable LNA combining
[  27.381213] ath: phy0: ASPM enabled: 0x43
[  27.381220] ath: EEPROM regdomain: 0x6a
[  27.381222] ath: EEPROM indicates we should expect a direct regpair map
[  27.381227] ath: Country alpha2 being used: 00
[  27.381229] ath: Regpair used: 0x6a
[  27.384859] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[  27.387607] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffffb6a201480000, irq=17
[  27.634743] kvm: disabled by bios
[  27.766476] kvm: disabled by bios
[  27.852514] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input9
[  27.963071] usb 4-2: new full-speed USB device number 3 using ohci-pci
[  28.035849] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) typepeaker
[  28.035863] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[  28.035867] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[  28.035870] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[  28.035872] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[  28.035877] snd_hda_codec_realtek hdaudioC1D0:      Mic=0x18
[  28.035881] snd_hda_codec_realtek hdaudioC1D0:      Internal Mic=0x12
[  28.058128] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
[  28.058300] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
[  28.137425] uvcvideo: Found UVC 1.00 device HP Truevision HD (04f2:b34f)
[  28.184243] usb 4-2: New USB device found, idVendor=0cf3, idProduct=3121, bcdDevice= 0.02
[  28.184250] usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[  28.195721] input: HP Truevision HD: HP Truevision as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1:1.0/input/input12
[  28.195929] usbcore: registered new interface driver uvcvideo
[  28.195932] USB Video Class driver (1.1.1)
[  29.014713] ath9k 0000:07:00.0 wlo1: renamed from wlan0
[  32.615648] audit: type=1400 audit(1656077745.295:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=546 comm="apparmor_parser"
[  32.615661] audit: type=1400 audit(1656077745.295:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=546 comm="apparmor_parser"
[  32.615667] audit: type=1400 audit(1656077745.295:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=546 comm="apparmor_parser"
[  32.764635] audit: type=1400 audit(1656077745.443:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=551 comm="apparmor_parser"
[  32.846680] audit: type=1400 audit(1656077745.523:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=552 comm="apparmor_parser"
[  32.911320] audit: type=1400 audit(1656077745.591:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice" pid=547 comm="apparmor_parser"
[  32.911333] audit: type=1400 audit(1656077745.591:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice//gpg" pid=547 comm="apparmor_parser"
[  32.917876] audit: type=1400 audit(1656077745.595:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=553 comm="apparmor_parser"
[  32.958391] audit: type=1400 audit(1656077745.635:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=554 comm="apparmor_parser"
[  32.958403] audit: type=1400 audit(1656077745.635:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=554 comm="apparmor_parser"
[  40.555875] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[  40.555881] Bluetooth: BNEP filters: protocol multicast
[  40.555893] Bluetooth: BNEP socket layer initialized
[  40.800783] NET: Registered protocol family 38
[  41.194877] kauditd_printk_skb: 12 callbacks suppressed
[  41.194883] audit: type=1400 audit(1656077753.847:24): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=713 comm="cups-browsed" capability=23  capname="sys_nice"
[  46.202684] RTL8211E Gigabit Ethernet r8169-0-300:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-0-300:00, irq=IGNORE)
[  46.380909] r8169 0000:03:00.0 eno1: Link is Down
[  48.295415] wlo1: authenticate with 08:a7:c0:64:54:71
[  48.308497] wlo1: send auth to 08:a7:c0:64:54:71 (try 1/3)
[  48.315480] wlo1: authenticated
[  48.319082] wlo1: associate with 08:a7:c0:64:54:71 (try 1/3)
[  48.323536] wlo1: RX AssocResp from 08:a7:c0:64:54:71 (capab=0x1411 status=0 aid=4)
[  48.323754] wlo1: associated
[  48.473716] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[  67.087463] Bluetooth: RFCOMM TTY layer initialized
[  67.087482] Bluetooth: RFCOMM socket layer initialized
[  67.087509] Bluetooth: RFCOMM ver 1.11
[  101.097452] usb 1-1: new high-speed USB device number 2 using ehci-pci
[  101.261608] usb 1-1: New USB device found, idVendor=058f, idProduct=6387, bcdDevice= 1.00
[  101.261617] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  101.261622] usb 1-1: Product: Mass Storage
[  101.261626] usb 1-1: Manufacturer: Generic
[  101.261630] usb 1-1: SerialNumber: F18319C2
[  101.434277] usb-storage 1-1:1.0: USB Mass Storage device detected
[  101.449691] scsi host2: usb-storage 1-1:1.0
[  101.451546] usbcore: registered new interface driver usb-storage
[  101.577901] usbcore: registered new interface driver uas
[  102.472397] scsi 2:0:0:0: Direct-Access    Generic  Flash Disk      8.07 PQ: 0 ANSI: 4
[  102.477479] sd 2:0:0:0: Attached scsi generic sg2 type 0
[  102.478912] sd 2:0:0:0: [sdb] 61440000 512-byte logical blocks: (31.5 GB/29.3 GiB)
[  102.480039] sd 2:0:0:0: [sdb] Write Protect is off
[  102.480046] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
[  102.481148] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[  102.504078]  sdb: sdb1
[  102.517257] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[  108.892728] usb 3-3: new full-speed USB device number 2 using ohci-pci
[  109.095816] usb 3-3: New USB device found, idVendor=062a, idProduct=4101, bcdDevice= 2.11
[  109.095826] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  109.095830] usb 3-3: Product: 2.4G Keyboard Mouse
[  109.095834] usb 3-3: Manufacturer: MOSART Semi.
[  109.413603] hidraw: raw HID events driver (C) Jiri Kosina
[  109.548581] usbcore: registered new interface driver usbhid
[  109.548587] usbhid: USB HID core driver
[  109.733161] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/0003:062A:4101.0001/input/input13
[  109.795222] hid-generic 0003:062A:4101.0001: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:12.0-3/input0
[  109.798556] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.1/0003:062A:4101.0002/input/input14
[  109.799734] input: MOSART Semi. 2.4G Keyboard Mouse Consumer Control as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.1/0003:062A:4101.0002/input/input15
[  109.857382] input: MOSART Semi. 2.4G Keyboard Mouse System Control as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.1/0003:062A:4101.0002/input/input16
[  109.857665] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.1/0003:062A:4101.0002/input/input17
[  109.858160] hid-generic 0003:062A:4101.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:12.0-3/input1
[  284.664950] usb 1-1: USB disconnect, device number 2
[  284.667835] blk_update_request: I/O error, dev sdb, sector 2049 op 0x1WRITE) flags 0x0 phys_seg 1 prio class 0
[  284.667857] Buffer I/O error on dev sdb1, logical block 1, lost async page write
[  284.667886] blk_update_request: I/O error, dev sdb, sector 32066 op 0x1WRITE) flags 0x0 phys_seg 1 prio class 0
[  284.667894] Buffer I/O error on dev sdb1, logical block 30018, lost async page write
[  284.761712] FAT-fs (sdb1): unable to read boot sector to mark fs as dirty
[  294.788756] usb 3-3: USB disconnect, device number 2
[  467.274053] usb 1-3: new high-speed USB device number 4 using ehci-pci
[  467.438033] usb 1-3: New USB device found, idVendor=058f, idProduct=6387, bcdDevice= 1.00
[  467.438044] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  467.438050] usb 1-3: Product: Mass Storage
[  467.438055] usb 1-3: Manufacturer: Generic
[  467.438060] usb 1-3: SerialNumber: F18319C2
[  467.442143] usb-storage 1-3:1.0: USB Mass Storage device detected
[  467.445589] scsi host2: usb-storage 1-3:1.0
[  468.469230] scsi 2:0:0:0: Direct-Access    Generic  Flash Disk      8.07 PQ: 0 ANSI: 4
[  468.470680] sd 2:0:0:0: Attached scsi generic sg2 type 0
[  468.472435] sd 2:0:0:0: [sdb] 61440000 512-byte logical blocks: (31.5 GB/29.3 GiB)
[  468.473558] sd 2:0:0:0: [sdb] Write Protect is off
[  468.473568] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
[  468.474840] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[  468.500591]  sdb: sdb1
[  468.526417] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[  469.218415] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[  503.820690] usb 3-2: new full-speed USB device number 3 using ohci-pci
[  504.016144] usb 3-2: New USB device found, idVendor=062a, idProduct=4101, bcdDevice= 2.11
[  504.016156] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  504.016163] usb 3-2: Product: 2.4G Keyboard Mouse
[  504.016168] usb 3-2: Manufacturer: MOSART Semi.
[  504.026026] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/0003:062A:4101.0003/input/input18
[  504.085945] hid-generic 0003:062A:4101.0003: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:12.0-2/input0
[  504.093166] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.1/0003:062A:4101.0004/input/input19
[  504.153752] input: MOSART Semi. 2.4G Keyboard Mouse Consumer Control as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.1/0003:062A:4101.0004/input/input20
[  504.154620] input: MOSART Semi. 2.4G Keyboard Mouse System Control as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.1/0003:062A:4101.0004/input/input21
[  504.155026] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.1/0003:062A:4101.0004/input/input22
[  504.155983] hid-generic 0003:062A:4101.0004: input,hiddev0,hidraw1: USB HID v1.10 Mouse [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:12.0-2/input1
[  505.992504] usb 1-1: new high-speed USB device number 6 using ehci-pci
[  506.159628] usb 1-1: New USB device found, idVendor=15f4, idProduct=0131, bcdDevice= 1.00
[  506.159639] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  506.159645] usb 1-1: Product: dvbt2
[  506.159651] usb 1-1: Manufacturer: astrometadvbt2
[  506.395204] usb 1-1: dvb_usb_v2: found a 'Astrometa DVB-T2' in warm state
[  506.518985] usb 1-1: USB disconnect, device number 6
[  506.521115] usbcore: registered new interface driver dvb_usb_rtl28xxu
[  509.724730] usb 1-3: USB disconnect, device number 4
[  509.725556] blk_update_request: I/O error, dev sdb, sector 2049 op 0x1WRITE) flags 0x0 phys_seg 1 prio class 0
[  509.725570] Buffer I/O error on dev sdb1, logical block 1, lost async page write
[  514.824245] usb 1-1: new high-speed USB device number 7 using ehci-pci
[  514.988255] usb 1-1: New USB device found, idVendor=058f, idProduct=6387, bcdDevice= 1.00
[  514.988266] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  514.988272] usb 1-1: Product: Mass Storage
[  514.988277] usb 1-1: Manufacturer: Generic
[  514.988282] usb 1-1: SerialNumber: F18319C2
[  514.989602] usb-storage 1-1:1.0: USB Mass Storage device detected
[  514.990131] scsi host2: usb-storage 1-1:1.0
[  516.019393] scsi 2:0:0:0: Direct-Access    Generic  Flash Disk      8.07 PQ: 0 ANSI: 4
[  516.020988] sd 2:0:0:0: Attached scsi generic sg2 type 0
[  516.022631] sd 2:0:0:0: [sdb] 61440000 512-byte logical blocks: (31.5 GB/29.3 GiB)
[  516.023776] sd 2:0:0:0: [sdb] Write Protect is off
[  516.023786] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
[  516.025006] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[  516.042794]  sdb: sdb1
[  516.063753] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[  516.744960] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[  527.511795] usb 1-3: new high-speed USB device number 8 using ehci-pci
[  527.679162] usb 1-3: New USB device found, idVendor=15f4, idProduct=0131, bcdDevice= 1.00
[  527.679173] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  527.679179] usb 1-3: Product: dvbt2
[  527.679184] usb 1-3: Manufacturer: astrometadvbt2
[  527.687762] usb 1-3: dvb_usb_v2: found a 'Astrometa DVB-T2' in warm state
[  527.834883] usb 1-3: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[  527.834918] dvbdev: DVB: registering new adapter (Astrometa DVB-T2)
[  527.834930] usb 1-3: media controller created
[  527.837540] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
[  527.887861] i2c i2c-8: Added multiplexed i2c bus 9
[  527.887876] rtl2832 8-0010: Realtek RTL2832 successfully attached
[  527.950680] i2c i2c-8: cxd2841er_attach(): I2C adapter 00000000852314de SLVX addr 6e SLVT addr 6c
[  527.955265] i2c i2c-8: cxd2841er_attach(): attaching CXD2837ER DVB-C/T/T2 frontend
[  527.955280] i2c i2c-8: cxd2841er_attach(): chip ID 0xb1 OK.
[  527.955296] usb 1-3: DVB: registering adapter 0 frontend 0 (Realtek RTL2832 (DVB-T))...
[  527.955324] dvbdev: dvb_create_media_entity: media entity 'Realtek RTL2832 (DVB-T)' registered.
[  527.955822] usb 1-3: DVB: registering adapter 0 frontend 1 (Sony CXD2837ER DVB-T/T2/C demodulator)...
[  527.955833] dvbdev: dvb_create_media_entity: media entity 'Sony CXD2837ER DVB-T/T2/C demodulator' registered.
[  528.024391] r820t 9-003a: creating new instance
[  528.032156] r820t 9-003a: Rafael Micro r820t successfully identified
[  528.032180] r820t 9-003a: attaching existing instance
[  528.050858] r820t 9-003a: Rafael Micro r820t successfully identified
[  528.079700] rtl2832_sdr rtl2832_sdr.1.auto: Registered as swradio0
[  528.079707] rtl2832_sdr rtl2832_sdr.1.auto: Realtek RTL2832 SDR attached
[  528.079711] rtl2832_sdr rtl2832_sdr.1.auto: SDR API is still slightly experimental and functionality changes may follow
[  528.088380] Registered IR keymap rc-empty
[  528.088548] rc rc0: Astrometa DVB-T2 as /devices/pci0000:00/0000:00:12.2/usb1/1-3/rc/rc0
[  528.088749] rc rc0: lirc_dev: driver dvb_usb_rtl28xxu registered at minor = 0, raw IR receiver, no transmitter
[  528.088867] input: Astrometa DVB-T2 as /devices/pci0000:00/0000:00:12.2/usb1/1-3/rc/rc0/input23
[  528.089395] usb 1-3: dvb_usb_v2: schedule remote query interval to 200 msecs
[  528.098347] usb 1-3: dvb_usb_v2: 'Astrometa DVB-T2' successfully initialized and connected

Część tekstu wyciąłem, ponieważ był zbyt długi.
Mam nadzieję, że najistotniejszy fragment jest na końcu.

[dedito]

0

dmesg możesz wrzucić do pliku lub na pastebin.
Używaj znaczników kodu zgodnie z zasadami forum.

[Gator]

0

dmesg możesz wrzucić do pliku lub na pastebin.
Używaj znaczników kodu zgodnie z zasadami forum.

Czy tak jest dobrze?

https://pastebin.pl/view/7265cb07

[dedito]

0

Wygląda dobrze:

Kod:

[  528.098347] usb 1-3: dvb_usb_v2: 'Astrometa DVB-T2' successfully initialized and connected

Masz wersję z 2018 roku na chipie Sony na co wskazują informacje z https://linuxtv.org/wiki/index.php/Astrometa_DVB-T2 oraz zawartość logu:

[  527.955296] usb 1-3: DVB: registering adapter 0 frontend 0 (Realtek RTL2832 (DVB-T))...
[  527.955324] dvbdev: dvb_create_media_entity: media entity 'Realtek RTL2832 (DVB-T)' registered.
[  527.955822] usb 1-3: DVB: registering adapter 0 frontend 1 (Sony CXD2837ER DVB-T/T2/C demodulator)...
[  527.955833] dvbdev: dvb_create_media_entity: media entity 'Sony CXD2837ER DVB-T/T2/C demodulator' registered.

Jest tam też informacja o kłopotach z wersją z 2018

In 2018 several clones are being shipped using the Sony CXD2837 chipset. This has a driver from kernel 4.14 onwards (it is now covered by the cxd2841er driver), but the device as a whole does not work because the RTL2832 driver has not been updated to recognise it. However, updated RTL2832 driver has been accepted to the media_tree (as mentioned here) so you can compile it yourself (see How to Obtain, Build and Install V4L-DVB Device Drivers#Retrieving_from_the_upstream_development_Kernel_tree) or use a specialized distribution such as LibreELEC (kodi appliance) which supports this device out-of-the-box, provided you enable the bundled "DVB drivers from the latest kernel (media_build)" add-on. These changes will most likely be included in the next mainline kernel. In most cases the RTL chip does not appear to be connected to the tuner, so these devices will not work for DVB-T either. Even though the chipset is different and incompatible, the same USB vendor and product IDs are used (15f4:0131). The clones with the Sony demodulator reported so far are:

• Blue coloured PCB either with a white case or a black case, both with silver writing. You (or a potential seller) can tell if this uses an incompatible Sony chip by holding it in front of (or for the black ones: directly under) a light source and see the colour of the PCB through the holes. dmesg output, lsusb -vvv output and PCB photos here
  
• Green coloured PCB with a case matching the 2014 revision. The only way to tell if this uses the Sony chip (or is the 2014 revision with working Panasonic chipset) is to open the case and read the part number on the chip.
  

jednak u ciebie RTL2832 jest wykrywane, więc to raczej nie to.

Wydaje mi się, że tuner jest gotowy do pracy i nie porzebuje nic więcej.
Wrzuć wynik skanowania i sprawdź jaką masz wersję bazując na informacjach podanych wyżej (najlepiej zdjęcia PCB z dwóch stron)

Literatura:
http://dvbpro.ru/wp-content/uploads/2017...-V1.03.pdf
https://tvheadend.org/boards/5/topics/34893?r=35099

[Gator]

0

Też sądze, że tuner jest ok, bo Kaffeine go wykrywa i nawet skanuje kanały (pojawia się silny sygnał w trzech lub czterech miejscach pasma). Niestety, żaden kanał nie zostaje zapisany.

Z fotkami jest problem techniczny: nie widać na nich oznaczeń, więc spisałem oznaczenia pod mikroskopem z trzech czipów:

RTL 2832P I5K62Q1  GI28D
SONY D2837ER 043K42J
Rafael Micro P828D  D2H485OGEC 1223D

Płytka zielona, obudowa tunera czarna - bo i takie pytania były w sieci.


Skanowanie za pomocą w_scan nic nie wniosło:

Kod:

irena@irena-HP-255-G1-Notebook-PC:~$ w_scan -c PL -t 3 -F
w_scan -c PL -t 3 -F
w_scan version 20170107 (compiled for DVB API 5.10)
using settings for POLAND
DVB aerial
DVB-T Europe
scan type TERRESTRIAL, channellist 4
output format vdr-2.0
output charset 'UTF-8', use -C <charset> to override
Info: using DVB adapter auto detection.
    /dev/dvb/adapter0/frontend0 -> TERRESTRIAL "Realtek RTL2832 (DVB-T)": good :-)
    /dev/dvb/adapter0/frontend1 -> TERRESTRIAL "Sony CXD2837ER DVB-T/T2/C demodulator": very good :-))

Using TERRESTRIAL frontend (adapter /dev/dvb/adapter0/frontend1)
-_-_-_-_ Getting frontend capabilities-_-_-_-_
Using DVB API 5.11
frontend 'Sony CXD2837ER DVB-T/T2/C demodulator' supports
DVB-T2
INVERSION_AUTO
QAM_AUTO
TRANSMISSION_MODE_AUTO
GUARD_INTERVAL_AUTO
HIERARCHY_AUTO
FEC_AUTO
BANDWIDTH_AUTO not supported, trying 6/7/8 MHz.
FREQ (42.00MHz ... 1002.00MHz)
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
Scanning DVB-T...
Scanning 8MHz frequencies...
474000: (time: 00:01.232)
482000: (time: 00:06.060)
490000: (time: 00:10.644)
498000: (time: 00:15.232)
506000: (time: 00:19.816)
514000: (time: 00:24.400)
522000: (time: 00:29.032)
530000: (time: 00:37.084)
538000: (time: 00:41.685)
546000: (time: 00:46.309)
554000: (time: 00:50.901)
562000: (time: 00:55.505)
570000: (time: 01:00.137)
578000: (time: 01:04.737)
586000: (time: 01:12.805)
594000: (time: 01:17.402)
602000: (time: 01:22.022)
610000: (time: 01:26.642)
618000: (time: 01:31.286)
626000: (time: 01:35.914)
634000: (time: 01:40.498)
642000: (time: 01:45.082)
650000: (time: 01:49.702)
658000: (time: 01:54.319)
666000: (time: 01:58.911)
674000: (time: 02:03.523)
682000: (time: 02:08.143)
690000: (time: 02:12.735)
698000: (time: 02:20.811)
706000: (time: 02:25.395)
714000: (time: 02:30.026)
722000: (time: 02:34.622)
730000: (time: 02:39.222)
738000: (time: 02:43.826)
746000: (time: 02:48.426)
754000: (time: 02:53.030)
762000: (time: 02:57.662)
770000: (time: 03:02.290)
778000: (time: 03:10.338)
786000: (time: 03:14.930)
794000: (time: 03:19.558)
802000: (time: 03:24.161)
810000: (time: 03:28.769)
818000: (time: 03:33.377)
826000: (time: 03:37.981)
834000: (time: 03:42.609)
842000: (time: 03:47.249)
850000: (time: 03:51.825)
858000: (time: 03:56.429)
Scanning DVB-T2...
474000: (time: 04:01.009)
482000: (time: 04:05.877)
490000: (time: 04:10.505)
498000: (time: 04:18.565)
506000: (time: 04:23.177)
514000: (time: 04:27.777)
522000: (time: 04:32.405)
530000: (time: 04:36.989)
538000: (time: 04:41.609)
546000: (time: 04:46.225)
554000: (time: 04:50.821)
562000: (time: 04:58.897)
570000: (time: 05:03.561)
578000: (time: 05:08.169)
586000: (time: 05:12.805)
594000: (time: 05:17.429)
602000: (time: 05:22.042)
610000: (time: 05:26.690)
618000: (time: 05:31.306)
626000: (time: 05:35.914)
634000: (time: 05:40.530)
642000: (time: 05:45.158)
650000: (time: 05:49.758)
658000: (time: 05:54.378)
666000: (time: 05:58.990)
674000: (time: 06:03.618)
682000: (time: 06:08.254)
690000: (time: 06:12.866)
698000: (time: 06:17.470)
706000: (time: 06:22.110)
714000: (time: 06:26.726)
722000: (time: 06:31.354)
730000: (time: 06:35.930)
738000: (time: 06:40.514)
746000: (time: 06:45.134)
754000: (time: 06:49.754)
762000: (time: 06:54.387)
770000: (time: 06:58.991)
778000: (time: 07:03.603)
786000: (time: 07:08.231)
794000: (time: 07:12.835)
802000: (time: 07:17.455)
810000: (time: 07:22.063)
818000: (time: 07:26.675)
826000: (time: 07:31.311)
834000: (time: 07:35.907)
842000: (time: 07:40.503)
850000: (time: 07:45.127)
858000: (time: 07:49.727)

ERROR: Sorry - i couldn't get any working frequency/transponder
Nothing to scan!!

[mirej]

0

Mam ten sam problem. (Wszyszukuje kanały, jest tylko dzwięk).
Koffeine brak kodeka H.256 bo niektóre filmy 4k też nie działąją.
VLC działa i używa Kodek: MPEG-H Part2/HEVC (H.265) (hvc1)
Koffeine chce używać.

Kod:

[00007f9fb4004e90] gl gl: Initialized libplacebo v4.192.1 (API v192)
[00007f9fdc03d440] avcodec decoder: Using NVIDIA VDPAU Driver Shared Library  535.154.05  Thu Dec 28 15:49:31 UTC 2023 for hardware decoding
[00007f9fb40c5350] vdpau_chroma filter error: video mixer rendering failure: A catch-all error, used when no other error code applies.
[00007f9fdc03d440] avcodec decoder error: hardware acceleration picture allocation failed
[hevc @ 0x7f9fc4038b40] get_buffer() failed
[hevc @ 0x7f9fc4038b40] thread_get_buffer() failed
[00007f9fb40c5350] vdpau_chroma filter error: video mixer rendering failure: A catch-all error, used when no other error code applies.

Na dystrybucji Mageia-9 działa OK, bez użycia vdpau. Jak Graficznie wyłączyć vdpau?