Ocena wątku:
  • 0 głosów - średnia: 0
  • 1
  • 2
  • 3
  • 4
  • 5
Rozwiązane Brak podświetlenia klawiatury Tracer KTM46710
#1
0
Witam, tak jak w tytule zakupionej klawiaturze nie działa podświetlenie (na Win10 działa). Dodatkowe funkcje multimedialne klawiatury działają (np. przyciszanie/pogłaśnianie) z przyciskiem FN+... ale nie podświetlenie. Czy szkoda zachodu i oddać klawiaturę póki jest taka możliwość i kupić inna zgodna z Linux/Win - tylko niech ktoś mnie oświetli* z jakiej firmy szukać. Nie wiem czy odpowiedni kod podałem bo zielony jestem Tongue, jak ktoś ma więcej czasu i siły to proszę przekazywać wiedze łopatologicznie i z dużą doza cierpliwości.
Pozdrawiam.
Tracer KTM46710
Kod:
dell@dell-OptiPlex-3020:~$ inxi -Fxz
System:
  Kernel: 5.4.0-67-generic x86_64 bits: 64 compiler: gcc v: 9.3.0
  Desktop: Cinnamon 4.8.6 Distro: Linux Mint 20.1 Ulyssa
  base: Ubuntu 20.04 focal
Machine:
  Type: Desktop System: Dell product: OptiPlex 3020 v: 00 serial: <filter>
  Mobo: Dell model: 0WMJ54 v: A01 serial: <filter> UEFI: Dell v: A19
  date: 10/30/2018
CPU:
  Topology: Quad Core model: Intel Core i5-4590 bits: 64 type: MCP
  arch: Haswell rev: 3 L2 cache: 6144 KiB
  flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  bogomips: 26338
  Speed: 798 MHz min/max: 800/3700 MHz Core speeds (MHz): 1: 798 2: 798
  3: 798 4: 798
Graphics:
  Device-1: Intel Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics
  vendor: Dell driver: i915 v: kernel bus ID: 00:02.0
  Display: x11 server: X.Org 1.20.9 driver: modesetting unloaded: fbdev,vesa
  resolution: 1920x1200~60Hz
  OpenGL: renderer: Mesa DRI Intel HD Graphics 4600 (HSW GT2)
  v: 4.5 Mesa 20.2.6 direct render: Yes
Audio:
  Device-1: Intel Xeon E3-1200 v3/4th Gen Core Processor HD Audio
  vendor: Dell driver: snd_hda_intel v: kernel bus ID: 00:03.0
  Device-2: Intel 8 Series/C220 Series High Definition Audio vendor: Dell
  driver: snd_hda_intel v: kernel bus ID: 00:1b.0
  Device-3: Xiongmai web camera type: USB driver: snd-usb-audio,uvcvideo
  bus ID: 3-6:4
  Sound Server: ALSA v: k5.4.0-67-generic
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
  vendor: Dell driver: r8169 v: kernel port: e000 bus ID: 02:00.0
  IF: enp2s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:
  Local Storage: total: 596.18 GiB used: 14.51 GiB (2.4%)
  ID-1: /dev/sda model: IRP-SSDPR-S25C-512 size: 476.94 GiB
  ID-2: /dev/sdb vendor: LITE-ON IT model: LCS-128M6S 2.5 7mm 128GB
  size: 119.24 GiB
Partition:
  ID-1: / size: 467.96 GiB used: 14.50 GiB (3.1%) fs: ext4 dev: /dev/sda2
Sensors:
  System Temperatures: cpu: 35.0 C mobo: N/A
  Fan Speeds (RPM): N/A
Info:
  Processes: 190 Uptime: 31m Memory: 7.70 GiB used: 1.19 GiB (15.4%)
  Init: systemd runlevel: 5 Compilers: gcc: 9.3.0 Shell: bash v: 5.0.17
  inxi: 3.0.38
dell@dell-OptiPlex-3020:~$
#2
1
Better response on post RE: Brak podświetlenia klawiatury Tracer KTM46710Przyda się jeszcze wynik lsusb i dmesgaby dokładniej zidentyfikować klawiaturę.
#3
0
proszę bardzo:

Kod:
dell@dell-OptiPlex-3020:~$ lsusb
Bus 002 Device 002: ID 8087:8000 Intel Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 004: ID 23c5:1478 Xiongmai web camera
Bus 003 Device 003: ID 18f8:0f97 [Maxxter] USB OPTICAL MOUSE
Bus 003 Device 002: ID c0f4:07c0 USB usb keyboard
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
dell@dell-OptiPlex-3020:~$

z druga komenda jest mały kłopot bo na forum dostałem zwrotny komunikat

"Popraw następujące błędy:
Wiadomość jest za długa. Wpisz wiadomość krótszą niż 65535 znaków (aktualna długość to 72662 znaków)."


Próbowałem pójść za poradą ale po uzyciu kemendy `
Kod:
lsusb|pastebinit

wyskakuje że nie ma połączenia
Kod:
dell@dell-OptiPlex-3020:~$ lsusb|pastebinit
Błąd połączenia z serwerem: HTTP Error 405: Method Not Allowed
dell@dell-OptiPlex-3020:~$

I nie wiem ... wynik drugiej komendy mogę rozdzielić na dwie części? i będzie post pod postem?

Kod:
dell@dell-OptiPlex-3020:~$ dmesg
[    0.000000] microcode: microcode updated early to revision 0x28, date = 2019-11-12
[    0.000000] Linux version 5.4.0-67-generic (buildd@lcy01-amd64-025) (gcc version 9.3.0 (Ubuntu 9.3.0-17ubuntu1~20.04)) #75-Ubuntu SMP Fri Feb 19 18:03:38 UTC 2021 (Ubuntu 5.4.0-67.75-generic 5.4.94)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-67-generic root=UUID=5f218e5f-376a-411e-bb6d-dba00241e3af ro quiet splash
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai 
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000d1951fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d1952000-0x00000000d1958fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000d1959000-0x00000000d1d8ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d1d90000-0x00000000d21bdfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000d21be000-0x00000000d7ee3fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d7ee4000-0x00000000d7ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000d8000000-0x00000000d875dfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d875e000-0x00000000d87fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000d8800000-0x00000000d8fadfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d8fae000-0x00000000d8ffffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000d9000000-0x00000000da717fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000da718000-0x00000000da7fffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000da800000-0x00000000db7fcfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000db7fd000-0x00000000dbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df1fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0xd5594018-0xd55a4057] usable ==> usable
[    0.000000] e820: update [mem 0xd5594018-0xd55a4057] usable ==> usable
[    0.000000] e820: update [mem 0xd558d018-0xd5593857] usable ==> usable
[    0.000000] e820: update [mem 0xd558d018-0xd5593857] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009efff] usable
[    0.000000] reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000d1951fff] usable
[    0.000000] reserve setup_data: [mem 0x00000000d1952000-0x00000000d1958fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000d1959000-0x00000000d1d8ffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000d1d90000-0x00000000d21bdfff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000d21be000-0x00000000d558d017] usable
[    0.000000] reserve setup_data: [mem 0x00000000d558d018-0x00000000d5593857] usable
[    0.000000] reserve setup_data: [mem 0x00000000d5593858-0x00000000d5594017] usable
[    0.000000] reserve setup_data: [mem 0x00000000d5594018-0x00000000d55a4057] usable
[    0.000000] reserve setup_data: [mem 0x00000000d55a4058-0x00000000d7ee3fff] usable
[    0.000000] reserve setup_data: [mem 0x00000000d7ee4000-0x00000000d7ffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000d8000000-0x00000000d875dfff] usable
[    0.000000] reserve setup_data: [mem 0x00000000d875e000-0x00000000d87fffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000d8800000-0x00000000d8fadfff] usable
[    0.000000] reserve setup_data: [mem 0x00000000d8fae000-0x00000000d8ffffff] ACPI data
[    0.000000] reserve setup_data: [mem 0x00000000d9000000-0x00000000da717fff] usable
[    0.000000] reserve setup_data: [mem 0x00000000da718000-0x00000000da7fffff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000da800000-0x00000000db7fcfff] usable
[    0.000000] reserve setup_data: [mem 0x00000000db7fd000-0x00000000dbffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000dd000000-0x00000000df1fffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000021fdfffff] usable
[    0.000000] efi: EFI v2.31 by American Megatrends
[    0.000000] efi:  ACPI=0xd8fee000  ACPI 2.0=0xd8fee000  SMBIOS=0xf04c0  MPS=0xfd6a0
[    0.000000] secureboot: Secure boot disabled
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Dell Inc. OptiPlex 3020/0WMJ54, BIOS A19 10/30/2018
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3292.292 MHz processor
[    0.001615] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.001616] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.001622] last_pfn = 0x21fe00 max_arch_pfn = 0x400000000
[    0.001625] MTRR default type: uncachable
[    0.001626] MTRR fixed ranges enabled:
[    0.001627]   00000-9FFFF write-back
[    0.001627]   A0000-BFFFF uncachable
[    0.001628]   C0000-DBFFF write-protect
[    0.001628]   DC000-DFFFF uncachable
[    0.001629]   E0000-FFFFF write-protect
[    0.001629] MTRR variable ranges enabled:
[    0.001630]   0 base 0000000000 mask 7E00000000 write-back
[    0.001631]   1 base 0200000000 mask 7FE0000000 write-back
[    0.001631]   2 base 00E0000000 mask 7FE0000000 uncachable
[    0.001632]   3 base 00DE000000 mask 7FFE000000 uncachable
[    0.001632]   4 base 00DD000000 mask 7FFF000000 uncachable
[    0.001633]   5 base 021FE00000 mask 7FFFE00000 uncachable
[    0.001633]   6 disabled
[    0.001634]   7 disabled
[    0.001634]   8 disabled
[    0.001634]   9 disabled
[    0.001896] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT 
[    0.002007] total RAM covered: 8142M
[    0.002214] Found optimal setting for mtrr clean up
[    0.002214]  gran_size: 64K     chunk_size: 64M     num_reg: 8      lose cover RAM: 0G
[    0.002460] e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved
[    0.002463] last_pfn = 0xdb7fd max_arch_pfn = 0x400000000
[    0.008103] found SMP MP-table at [mem 0x000fd930-0x000fd93f]
[    0.008122] check: Scanning 1 areas for low memory corruption
[    0.008126] Using GB pages for direct mapping
[    0.009356] secureboot: Secure boot disabled
[    0.009357] RAMDISK: [mem 0x3ad1c000-0x3fffdfff]
[    0.009363] ACPI: Early table checksum verification disabled
[    0.009366] ACPI: RSDP 0x00000000D8FEE000 000024 (v02 DELL  )
[    0.009368] ACPI: XSDT 0x00000000D8FEE080 000084 (v01 DELL   CBX3     01072009 AMI  00010013)
[    0.009372] ACPI: FACP 0x00000000D8FFAAE8 00010C (v05 DELL   CBX3     01072009 AMI  00010013)
[    0.009375] ACPI: DSDT 0x00000000D8FEE198 00C949 (v02 DELL   CBX3     00000014 INTL 20091112)
[    0.009377] ACPI: FACS 0x00000000DA7FE080 000040
[    0.009379] ACPI: APIC 0x00000000D8FFABF8 000072 (v03 DELL   CBX3     01072009 AMI  00010013)
[    0.009381] ACPI: FPDT 0x00000000D8FFAC70 000044 (v01 DELL   CBX3     01072009 AMI  00010013)
[    0.009382] ACPI: SLIC 0x00000000D8FFACB8 000176 (v03 DELL   CBX3     01072009 MSFT 00010013)
[    0.009384] ACPI: SSDT 0x00000000D8FFAE30 000539 (v01 PmRef  Cpu0Ist  00003000 INTL 20120711)
[    0.009386] ACPI: SSDT 0x00000000D8FFB370 000AD8 (v01 PmRef  CpuPm    00003000 INTL 20120711)
[    0.009388] ACPI: SSDT 0x00000000D8FFBE48 0001C7 (v01 PmRef  LakeTiny 00003000 INTL 20120711)
[    0.009390] ACPI: HPET 0x00000000D8FFC010 000038 (v01 DELL   CBX3     01072009 AMI. 00000005)
[    0.009392] ACPI: SSDT 0x00000000D8FFC048 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
[    0.009394] ACPI: MCFG 0x00000000D8FFC3B8 00003C (v01 DELL   CBX3     01072009 MSFT 00000097)
[    0.009396] ACPI: SSDT 0x00000000D8FFC3F8 003528 (v01 SaSsdt SaSsdt   00003000 INTL 20091112)
[    0.009398] ACPI: BGRT 0x00000000D8FFF920 000038 (v00 \xf3\xee:d??          01072009 AMI  00010013)
[    0.009404] ACPI: Local APIC address 0xfee00000
[    0.009467] No NUMA configuration found
[    0.009468] Faking a node at [mem 0x0000000000000000-0x000000021fdfffff]
[    0.009476] NODE_DATA(0) allocated [mem 0x21fdd3000-0x21fdfdfff]
[    0.009619] Zone ranges:
[    0.009620]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.009620]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.009621]   Normal   [mem 0x0000000100000000-0x000000021fdfffff]
[    0.009622]   Device   empty
[    0.009622] Movable zone start for each node
[    0.009624] Early memory node ranges
[    0.009625]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.009626]   node   0: [mem 0x0000000000059000-0x000000000009efff]
[    0.009626]   node   0: [mem 0x0000000000100000-0x00000000d1951fff]
[    0.009627]   node   0: [mem 0x00000000d1959000-0x00000000d1d8ffff]
[    0.009627]   node   0: [mem 0x00000000d21be000-0x00000000d7ee3fff]
[    0.009628]   node   0: [mem 0x00000000d8000000-0x00000000d875dfff]
[    0.009628]   node   0: [mem 0x00000000d8800000-0x00000000d8fadfff]
[    0.009628]   node   0: [mem 0x00000000d9000000-0x00000000da717fff]
[    0.009629]   node   0: [mem 0x00000000da800000-0x00000000db7fcfff]
[    0.009629]   node   0: [mem 0x0000000100000000-0x000000021fdfffff]
[    0.009793] Zeroed struct page in unavailable ranges: 20883 pages
[    0.009794] Initmem setup node 0 [mem 0x0000000000001000-0x000000021fdfffff]
[    0.009795] On node 0 totalpages: 2076269
[    0.009796]   DMA zone: 64 pages used for memmap
[    0.009796]   DMA zone: 25 pages reserved
[    0.009797]   DMA zone: 3997 pages, LIFO batch:0
[    0.009835]   DMA32 zone: 13956 pages used for memmap
[    0.009835]   DMA32 zone: 893136 pages, LIFO batch:63
[    0.020443]   Normal zone: 18424 pages used for memmap
[    0.020444]   Normal zone: 1179136 pages, LIFO batch:63
[    0.033845] Reserving Intel graphics memory at [mem 0xdd200000-0xdf1fffff]
[    0.033911] ACPI: PM-Timer IO Port: 0x1808
[    0.033913] ACPI: Local APIC address 0xfee00000
[    0.033918] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.033927] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[    0.033929] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.033930] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.033931] ACPI: IRQ0 used by override.
[    0.033931] ACPI: IRQ9 used by override.
[    0.033933] Using ACPI (MADT) for SMP configuration information
[    0.033934] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.033942] e820: update [mem 0xd0dc3000-0xd0dfcfff] usable ==> reserved
[    0.033949] TSC deadline timer available
[    0.033950] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.033972] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.033974] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.033975] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.033975] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.033977] PM: Registered nosave memory: [mem 0xd0dc3000-0xd0dfcfff]
[    0.033978] PM: Registered nosave memory: [mem 0xd1952000-0xd1958fff]
[    0.033979] PM: Registered nosave memory: [mem 0xd1d90000-0xd21bdfff]
[    0.033981] PM: Registered nosave memory: [mem 0xd558d000-0xd558dfff]
[    0.033982] PM: Registered nosave memory: [mem 0xd5593000-0xd5593fff]
[    0.033983] PM: Registered nosave memory: [mem 0xd5594000-0xd5594fff]
[    0.033984] PM: Registered nosave memory: [mem 0xd55a4000-0xd55a4fff]
[    0.033985] PM: Registered nosave memory: [mem 0xd7ee4000-0xd7ffffff]
[    0.033987] PM: Registered nosave memory: [mem 0xd875e000-0xd87fffff]
[    0.033988] PM: Registered nosave memory: [mem 0xd8fae000-0xd8ffffff]
[    0.033990] PM: Registered nosave memory: [mem 0xda718000-0xda7fffff]
[    0.033991] PM: Registered nosave memory: [mem 0xdb7fd000-0xdbffffff]
[    0.033991] PM: Registered nosave memory: [mem 0xdc000000-0xdcffffff]
[    0.033992] PM: Registered nosave memory: [mem 0xdd000000-0xdf1fffff]
[    0.033992] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
[    0.033993] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.033993] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.033993] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.033994] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.033994] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.033994] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.033995] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.033995] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.033996] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.033996] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.033996] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.033998] [mem 0xdf200000-0xf7ffffff] available for PCI devices
[    0.033999] Booting paravirtualized kernel on bare hardware
[    0.034001] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.034007] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.034248] percpu: Embedded 55 pages/cpu s188416 r8192 d28672 u524288
[    0.034254] pcpu-alloc: s188416 r8192 d28672 u524288 alloc=1*2097152
[    0.034254] pcpu-alloc: [0] 0 1 2 3
[    0.034281] Built 1 zonelists, mobility grouping on.  Total pages: 2043800
[    0.034281] Policy zone: Normal
[    0.034283] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-67-generic root=UUID=5f218e5f-376a-411e-bb6d-dba00241e3af ro quiet splash
[    0.035013] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.035358] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.035395] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.040904] Calgary: detecting Calgary via BIOS EBDA area
[    0.040906] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.067756] Memory: 7891212K/8305076K available (14339K kernel code, 2400K rwdata, 5008K rodata, 2732K init, 4972K bss, 413864K reserved, 0K cma-reserved)
[    0.067763] random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
[    0.067866] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.067876] Kernel/User page tables isolation: enabled
[    0.067888] ftrace: allocating 44566 entries in 175 pages
[    0.080089] rcu: Hierarchical RCU implementation.
[    0.080090] rcu:     RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.080091]     Tasks RCU enabled.
[    0.080091] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.080092] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.082039] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[    0.082294] random: crng done (trusting CPU's manufacturer)
[    0.082310] Console: colour dummy device 80x25
[    0.082314] printk: console [tty0] enabled
[    0.082328] ACPI: Core revision 20190816
[    0.082410] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.082422] APIC: Switch to symmetric I/O mode setup
[    0.082486] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.082814] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.102423] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2f74daeae34, max_idle_ns: 440795356230 ns
[    0.102426] Calibrating delay loop (skipped), value calculated using timer frequency.. 6584.58 BogoMIPS (lpj=13169168)
[    0.102427] pid_max: default: 32768 minimum: 301
[    0.104749] LSM: Security Framework initializing
[    0.104757] Yama: becoming mindful.
[    0.104780] AppArmor: AppArmor initialized
[    0.104818] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.104835] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.104845] *** VALIDATE tmpfs ***
[    0.104952] *** VALIDATE proc ***
[    0.104989] *** VALIDATE cgroup1 ***
[    0.104989] *** VALIDATE cgroup2 ***
[    0.105033] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.105044] process: using mwait in idle threads
[    0.105046] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.105046] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.105048] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.105049] Spectre V2 : Mitigation: Full generic retpoline
[    0.105049] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.105049] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.105050] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.105051] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.105054] SRBDS: Mitigation: Microcode
[    0.105054] MDS: Mitigation: Clear CPU buffers
[    0.105186] Freeing SMP alternatives memory: 40K
[    0.106710] smpboot: CPU0: Intel(R) Core(TM) i5-4590 CPU @ 3.30GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[    0.106793] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.106806] ... version:                3
[    0.106806] ... bit width:              48
[    0.106806] ... generic registers:      8
[    0.106807] ... value mask:             0000ffffffffffff
[    0.106807] ... max period:             00007fffffffffff
[    0.106808] ... fixed-purpose events:   3
[    0.106808] ... event mask:             00000007000000ff
[    0.106832] rcu: Hierarchical SRCU implementation.
[    0.107441] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.107480] smp: Bringing up secondary CPUs ...
[    0.107540] x86: Booting SMP configuration:
[    0.107541] .... node  #0, CPUs:      #1 #2 #3
[    0.111839] smp: Brought up 1 node, 4 CPUs
[    0.111839] smpboot: Max logical packages: 1
[    0.111839] smpboot: Total of 4 processors activated (26338.33 BogoMIPS)
[    0.111839] devtmpfs: initialized
[    0.111839] x86/mm: Memory block size: 128MB
[    0.111839] PM: Registering ACPI NVS region [mem 0xd1952000-0xd1958fff] (28672 bytes)
[    0.111839] PM: Registering ACPI NVS region [mem 0xda718000-0xda7fffff] (950272 bytes)
[    0.111839] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.111839] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.111839] pinctrl core: initialized pinctrl subsystem
[    0.111839] PM: RTC time: 17:59:49, date: 2021-03-22
[    0.111839] NET: Registered protocol family 16
[    0.111839] audit: initializing netlink subsys (disabled)
[    0.111839] audit: type=2000 audit(1616435989.028:1): state=initialized audit_enabled=0 res=1
[    0.111839] EISA bus registered
[    0.111839] cpuidle: using governor ladder
[    0.111839] cpuidle: using governor menu
[    0.111839] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.111839] ACPI: bus type PCI registered
[    0.111839] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.114430] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.114432] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.114439] PCI: Using configuration type 1 for base access
[    0.114481] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[    0.114689] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.115418] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.115418] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.115418] ACPI: Added _OSI(Module Device)
[    0.115418] ACPI: Added _OSI(Processor Device)
[    0.115418] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.115418] ACPI: Added _OSI(Processor Aggregator Device)
[    0.115418] ACPI: Added _OSI(Linux-Dell-Video)
[    0.115418] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.115418] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.125858] ACPI: 6 ACPI AML tables successfully acquired and loaded
[    0.127009] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.127879] ACPI: Dynamic OEM Table Load:
[    0.127883] ACPI: SSDT 0xFFFF8D1C96BF5400 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20120711)
[    0.128700] ACPI: Dynamic OEM Table Load:
[    0.128703] ACPI: SSDT 0xFFFF8D1C9637B000 0005AA (v01 PmRef  ApIst    00003000 INTL 20120711)
[    0.129561] ACPI: Dynamic OEM Table Load:
[    0.129564] ACPI: SSDT 0xFFFF8D1C96331000 000119 (v01 PmRef  ApCst    00003000 INTL 20120711)
[    0.130850] ACPI: Interpreter enabled
[    0.130872] ACPI: (supports S0 S3 S4 S5)
[    0.130872] ACPI: Using IOAPIC for interrupt routing
[    0.130894] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.131095] ACPI: Enabled 7 GPEs in block 00 to 3F
[    0.140165] ACPI: Power Resource [FN00] (off)
[    0.140239] ACPI: Power Resource [FN01] (off)
[    0.140311] ACPI: Power Resource [FN02] (off)
[    0.140381] ACPI: Power Resource [FN03] (off)
[    0.140450] ACPI: Power Resource [FN04] (off)
[    0.141211] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.141215] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.142877] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[    0.142878] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.143327] PCI host bridge to bus 0000:00
[    0.143329] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.143330] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.143331] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.143331] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.143332] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window]
[    0.143333] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.143339] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[    0.143412] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000
[    0.143420] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[    0.143423] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.143426] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.143435] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.143499] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[    0.143505] pci 0000:00:03.0: reg 0x10: [mem 0xf7d14000-0xf7d17fff 64bit]
[    0.143591] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[    0.143608] pci 0000:00:14.0: reg 0x10: [mem 0xf7d00000-0xf7d0ffff 64bit]
[    0.143658] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.143724] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[    0.143743] pci 0000:00:16.0: reg 0x10: [mem 0xf7d1e000-0xf7d1e00f 64bit]
[    0.143795] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.143859] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[    0.143878] pci 0000:00:1a.0: reg 0x10: [mem 0xf7d1c000-0xf7d1c3ff]
[    0.143947] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.144016] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[    0.144033] pci 0000:00:1b.0: reg 0x10: [mem 0xf7d10000-0xf7d13fff 64bit]
[    0.144093] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.144156] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[    0.144249] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.144342] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
[    0.144409] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.144530] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[    0.144549] pci 0000:00:1d.0: reg 0x10: [mem 0xf7d1b000-0xf7d1b3ff]
[    0.144621] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.144692] pci 0000:00:1f.0: [8086:8c5c] type 00 class 0x060100
[    0.144842] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
[    0.144856] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
[    0.144862] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
[    0.144868] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
[    0.144874] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
[    0.144879] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.144885] pci 0000:00:1f.2: reg 0x24: [mem 0xf7d1a000-0xf7d1a7ff]
[    0.144914] pci 0000:00:1f.2: PME# supported from D3hot
[    0.144975] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[    0.144990] pci 0000:00:1f.3: reg 0x10: [mem 0xf7d19000-0xf7d190ff 64bit]
[    0.145006] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.145121] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.145185] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.145213] pci 0000:02:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.145238] pci 0000:02:00.0: reg 0x18: [mem 0xf7c00000-0xf7c00fff 64bit]
[    0.145254] pci 0000:02:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[    0.145350] pci 0000:02:00.0: supports D1 D2
[    0.145351] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.145454] pci 0000:00:1c.3: PCI bridge to [bus 02]
[    0.145457] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
[    0.145460] pci 0000:00:1c.3:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.145464] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.146163] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.146213] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.146261] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15)
[    0.146309] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.146357] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.146405] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.146454] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.146502] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.146843] iommu: Default domain type: Translated
[    0.146843] SCSI subsystem initialized
[    0.146843] libata version 3.00 loaded.
[    0.146843] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.146843] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.146843] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.146843] vgaarb: loaded
[    0.146843] ACPI: bus type USB registered
[    0.146843] usbcore: registered new interface driver usbfs
[    0.146843] usbcore: registered new interface driver hub
[    0.146843] usbcore: registered new device driver usb
[    0.146843] pps_core: LinuxPPS API ver. 1 registered
[    0.146843] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[    0.146843] PTP clock support registered
[    0.146843] EDAC MC: Ver: 3.0.0
[    0.146843] Registered efivars operations
[    0.146843] PCI: Using ACPI for IRQ routing
[    0.147652] PCI: pci_cache_line_size set to 64 bytes
[    0.147679] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.147680] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.147680] e820: reserve RAM buffer [mem 0xd0dc3000-0xd3ffffff]
[    0.147681] e820: reserve RAM buffer [mem 0xd1952000-0xd3ffffff]
[    0.147681] e820: reserve RAM buffer [mem 0xd1d90000-0xd3ffffff]
[    0.147682] e820: reserve RAM buffer [mem 0xd558d018-0xd7ffffff]
[    0.147682] e820: reserve RAM buffer [mem 0xd5594018-0xd7ffffff]
[    0.147683] e820: reserve RAM buffer [mem 0xd7ee4000-0xd7ffffff]
[    0.147683] e820: reserve RAM buffer [mem 0xd875e000-0xdbffffff]
[    0.147684] e820: reserve RAM buffer [mem 0xd8fae000-0xdbffffff]
[    0.147685] e820: reserve RAM buffer [mem 0xda718000-0xdbffffff]
[    0.147686] e820: reserve RAM buffer [mem 0xdb7fd000-0xdbffffff]
[    0.147686] e820: reserve RAM buffer [mem 0x21fe00000-0x21fffffff]
[    0.147752] NetLabel: Initializing
[    0.147753] NetLabel:  domain hash size = 128
[    0.147753] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.147764] NetLabel:  unlabeled traffic allowed by default
[    0.147774] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.147774] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.150437] clocksource: Switched to clocksource tsc-early
[    0.159310] *** VALIDATE bpf ***
[    0.159360] VFS: Disk quotas dquot_6.6.0
[    0.159371] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.159393] *** VALIDATE ramfs ***
[    0.159395] *** VALIDATE hugetlbfs ***
[    0.159455] AppArmor: AppArmor Filesystem Enabled
[    0.159475] pnp: PnP ACPI init
[    0.159574] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.159578] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.159751] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.159752] system 00:01: [io  0xffff] has been reserved
[    0.159753] system 00:01: [io  0xffff] has been reserved
[    0.159754] system 00:01: [io  0xffff] has been reserved
[    0.159755] system 00:01: [io  0x1c00-0x1cfe] has been reserved
[    0.159756] system 00:01: [io  0x1d00-0x1dfe] has been reserved
[    0.159756] system 00:01: [io  0x1e00-0x1efe] has been reserved
[    0.159757] system 00:01: [io  0x1f00-0x1ffe] has been reserved
[    0.159758] system 00:01: [io  0x1800-0x18fe] has been reserved
[    0.159758] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.159761] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.159777] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.159815] system 00:03: [io  0x1854-0x1857] has been reserved
[    0.159817] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.159911] system 00:04: [io  0x0a00-0x0a0f] has been reserved
[    0.159913] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.159949] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.159951] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.160447] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.160448] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.160449] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.160449] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.160450] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.160451] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.160452] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.160453] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.160454] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[    0.160455] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.160455] system 00:06: [mem 0xf7fdf000-0xf7fdffff] has been reserved
[    0.160456] system 00:06: [mem 0xf7fe0000-0xf7feffff] has been reserved
[    0.160459] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.160681] pnp: PnP ACPI: found 7 devices
[    0.161511] thermal_sys: Registered thermal governor 'fair_share'
[    0.161512] thermal_sys: Registered thermal governor 'bang_bang'
[    0.161512] thermal_sys: Registered thermal governor 'step_wise'
[    0.161513] thermal_sys: Registered thermal governor 'user_space'
[    0.161513] thermal_sys: Registered thermal governor 'power_allocator'
[    0.166004] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.166026] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.166028] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.166029] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[    0.166034] pci 0000:00:1c.0: BAR 14: assigned [mem 0xdf200000-0xdf3fffff]
[    0.166036] pci 0000:00:1c.0: BAR 15: assigned [mem 0xdf400000-0xdf5fffff 64bit pref]
[    0.166038] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.166039] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.166042] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.166046] pci 0000:00:1c.0:   bridge window [mem 0xdf200000-0xdf3fffff]
[    0.166048] pci 0000:00:1c.0:   bridge window [mem 0xdf400000-0xdf5fffff 64bit pref]
[    0.166053] pci 0000:00:1c.3: PCI bridge to [bus 02]
[    0.166055] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
[    0.166059] pci 0000:00:1c.3:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.166061] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.166066] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.166067] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.166067] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.166068] pci_bus 0000:00: resource 7 [mem 0x000dc000-0x000dffff window]
[    0.166069] pci_bus 0000:00: resource 8 [mem 0xdf200000-0xfeafffff window]
[    0.166070] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.166070] pci_bus 0000:01: resource 1 [mem 0xdf200000-0xdf3fffff]
[    0.166071] pci_bus 0000:01: resource 2 [mem 0xdf400000-0xdf5fffff 64bit pref]
[    0.166072] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.166072] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
[    0.166073] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.166160] NET: Registered protocol family 2
[    0.166281] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.166330] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.166464] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.166517] TCP: Hash tables configured (established 65536 bind 65536)
[    0.166547] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.166567] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.166599] NET: Registered protocol family 1
[    0.166603] NET: Registered protocol family 44
[    0.166610] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.190504] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x670 took 21744 usecs
[    0.214500] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x670 took 23422 usecs
[    0.214512] PCI: CLS 64 bytes, default 64
[    0.214539] Trying to unpack rootfs image as initramfs...
[    0.364607] Freeing initrd memory: 84872K
[    0.364652] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.364653] software IO TLB: mapped [mem 0xcbab0000-0xcfab0000] (64MB)
[    0.364814] check: Scanning for low memory corruption every 60 seconds
[    0.365143] Initialise system trusted keyrings
[    0.365151] Key type blacklist registered
[    0.365169] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    0.366091] zbud: loaded
[    0.366344] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.366449] fuse: init (API version 7.31)
[    0.366459] *** VALIDATE fuse ***
[    0.366460] *** VALIDATE fuse ***
[    0.366527] Platform Keyring initialized
[    0.369594] Key type asymmetric registered
[    0.369595] Asymmetric key parser 'x509' registered
[    0.369600] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    0.369622] io scheduler mq-deadline registered
[    0.369874] pcieport 0000:00:1c.0: PME: Signaling with IRQ 24
[    0.369892] pcieport 0000:00:1c.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    0.370065] pcieport 0000:00:1c.3: PME: Signaling with IRQ 25
[    0.370116] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.370153] efifb: probing for efifb
[    0.370167] efifb: showing boot graphics
[    0.370586] efifb: framebuffer at 0xe0000000, using 3072k, total 3072k
[    0.370586] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    0.370587] efifb: scrolling: redraw
[    0.370587] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.370615] fbcon: Deferring console take-over
[    0.370616] fb0: EFI VGA frame buffer device
[    0.370621] intel_idle: MWAIT substates: 0x42120
[    0.370622] intel_idle: v0.4.1 model 0x3C
[    0.370739] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.370851] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.370879] ACPI: Power Button [PWRB]
[    0.370903] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.370919] ACPI: Power Button [PWRF]
[    0.371544] thermal LNXTHERM:00: registered as thermal_zone0
[    0.371544] ACPI: Thermal Zone [TZ00] (28 C)
[    0.371743] thermal LNXTHERM:01: registered as thermal_zone1
[    0.371744] ACPI: Thermal Zone [TZ01] (30 C)
[    0.371914] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.373193] Linux agpgart interface v0.103
[    0.374583] loop: module loaded
[    0.374693] libphy: Fixed MDIO Bus: probed
[    0.374694] tun: Universal TUN/TAP device driver, 1.6
[    0.374709] PPP generic driver version 2.4.2
[    0.374750] VFIO - User Level meta-driver version: 0.3
[    0.374809] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.374811] ehci-pci: EHCI PCI platform driver
[    0.374887] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.374891] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.374899] ehci-pci 0000:00:1a.0: debug port 2
[    0.378799] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.378807] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d1c000
[    0.394484] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.394531] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    0.394532] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.394533] usb usb1: Product: EHCI Host Controller
[    0.394533] usb usb1: Manufacturer: Linux 5.4.0-67-generic ehci_hcd
[    0.394534] usb usb1: SerialNumber: 0000:00:1a.0
[    0.394700] hub 1-0:1.0: USB hub found
[    0.394704] hub 1-0:1.0: 2 ports detected
[    0.394932] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.394935] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.394944] ehci-pci 0000:00:1d.0: debug port 2
[    0.398850] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.398858] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d1b000
[    0.414482] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.414523] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    0.414524] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.414525] usb usb2: Product: EHCI Host Controller
[    0.414526] usb usb2: Manufacturer: Linux 5.4.0-67-generic ehci_hcd
[    0.414526] usb usb2: SerialNumber: 0000:00:1d.0
[    0.414695] hub 2-0:1.0: USB hub found
[    0.414699] hub 2-0:1.0: 2 ports detected
[    0.414829] ehci-platform: EHCI generic platform driver
[    0.414842] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.414847] ohci-pci: OHCI PCI platform driver
[    0.414854] ohci-platform: OHCI generic platform driver
[    0.414859] uhci_hcd: USB Universal Host Controller Interface driver
[    0.414973] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.414977] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.416015] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[    0.416019] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.416130] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    0.416131] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.416132] usb usb3: Product: xHCI Host Controller
[    0.416132] usb usb3: Manufacturer: Linux 5.4.0-67-generic xhci-hcd
[    0.416133] usb usb3: SerialNumber: 0000:00:14.0
[    0.416265] hub 3-0:1.0: USB hub found
[    0.416274] hub 3-0:1.0: 10 ports detected
[    0.417647] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.417649] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    0.417651] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    0.417671] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[    0.417672] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.417672] usb usb4: Product: xHCI Host Controller
[    0.417673] usb usb4: Manufacturer: Linux 5.4.0-67-generic xhci-hcd
[    0.417674] usb usb4: SerialNumber: 0000:00:14.0
[    0.417793] hub 4-0:1.0: USB hub found
[    0.417798] hub 4-0:1.0: 2 ports detected
[    0.417967] i8042: PNP: No PS/2 controller found.
[    0.418088] mousedev: PS/2 mouse device common for all mice
[    0.418186] rtc_cmos 00:02: RTC can wake from S4
[    0.418324] rtc_cmos 00:02: registered as rtc0
[    0.418332] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.418336] i2c /dev entries driver
[    0.418365] device-mapper: uevent: version 1.0.3
[    0.418397] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: [email protected]
[    0.418412] platform eisa.0: Probing EISA bus 0
[    0.418413] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    0.418413] platform eisa.0: Cannot allocate resource for EISA slot 1
[    0.418414] platform eisa.0: Cannot allocate resource for EISA slot 2
[    0.418415] platform eisa.0: Cannot allocate resource for EISA slot 3
[    0.418415] platform eisa.0: Cannot allocate resource for EISA slot 4
[    0.418416] platform eisa.0: Cannot allocate resource for EISA slot 5
[    0.418416] platform eisa.0: Cannot allocate resource for EISA slot 6
[    0.418417] platform eisa.0: Cannot allocate resource for EISA slot 7
[    0.418417] platform eisa.0: Cannot allocate resource for EISA slot 8
[    0.418418] platform eisa.0: EISA: Detected 0 cards
[    0.418422] intel_pstate: Intel P-state driver initializing
[    0.418682] ledtrig-cpu: registered to indicate activity on CPUs
[    0.418684] EFI Variables Facility v0.08 2004-May-17
[    0.422092] drop_monitor: Initializing network drop monitor service
[    0.422207] NET: Registered protocol family 10
[    0.426877] Segment Routing with IPv6
[    0.426893] NET: Registered protocol family 17
[    0.426947] Key type dns_resolver registered
[    0.427190] RAS: Correctable Errors collector initialized.
[    0.427221] microcode: sig=0x306c3, pf=0x2, revision=0x28
[    0.427247] microcode: Microcode Update Driver: v2.2.
[    0.427251] IPI shorthand broadcast: enabled
[    0.427256] sched_clock: Marking stable (427029048, 215943)->(671874025, -244629034)
[    0.427317] registered taskstats version 1
[    0.427323] Loading compiled-in X.509 certificates
[    0.427897] Loaded X.509 cert 'Build time autogenerated kernel key: 94aab4eff3692c1dc967cbf81b568f930ac61570'
[    0.428415] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
[    0.428925] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
[    0.428943] zswap: loaded using pool lzo/zbud
[    0.428982] Key type ._fscrypt registered
[    0.428982] Key type .fscrypt registered
[    0.433353] Key type big_key registered
[    0.435328] Key type encrypted registered
[    0.435330] AppArmor: AppArmor sha1 policy hashing enabled
[    0.435602] integrity: Loading X.509 certificate: UEFI:db
[    0.435625] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[    0.435625] integrity: Loading X.509 certificate: UEFI:db
[    0.435646] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[    0.435810] integrity: Loading X.509 certificate: UEFI:MokListRT
[    0.435822] integrity: Loaded X.509 cert 'SomeOrg: shim: a01ee84e9b37ace407961cc468c5909447878469'
[    0.435822] integrity: Loading X.509 certificate: UEFI:MokListRT
[    0.436033] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
[    0.436359] ima: No TPM chip found, activating TPM-bypass!
[    0.436363] ima: Allocated hash algorithm: sha1
[    0.436367] ima: No architecture policies found
[    0.436376] evm: Initialising EVM extended attributes:
[    0.436376] evm: security.selinux
[    0.436377] evm: security.SMACK64
[    0.436377] evm: security.SMACK64EXEC
[    0.436377] evm: security.SMACK64TRANSMUTE
[    0.436378] evm: security.SMACK64MMAP
[    0.436378] evm: security.apparmor
[    0.436378] evm: security.ima
[    0.436378] evm: security.capability
[    0.436379] evm: HMAC attrs: 0x1
[    0.436740] PM:   Magic number: 13:879:997
[    0.436840] rtc_cmos 00:02: setting system clock to 2021-03-22T17:59:49 UTC (1616435989)
[    0.437635] Freeing unused decrypted memory: 2040K
[    0.438026] Freeing unused kernel image memory: 2732K
[    0.474501] Write protecting the kernel read-only data: 22528k
[    0.474866] Freeing unused kernel image memory: 2008K
[    0.474995] Freeing unused kernel image memory: 1136K
[    0.481801] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.481802] x86/mm: Checking user space page tables
[    0.488282] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.488283] Run /init as init process
[    0.542662] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
[    0.552930] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    0.554660] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[    0.554677] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.555823] ahci 0000:00:1f.2: version 3.0
[    0.556368] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x21 impl SATA mode
[    0.556369] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems
[    0.558081] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20190816/utaddress-204)
[    0.558084] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.558087] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20190816/utaddress-204)
[    0.558089] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.558089] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20190816/utaddress-204)
[    0.558091] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20190816/utaddress-204)
[    0.558093] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.558093] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20190816/utaddress-204)
[    0.558095] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20190816/utaddress-204)
[    0.558096] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.558097] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    0.562350] cryptd: max_cpu_qlen set to 1000
[    0.565586] AVX2 version of gcm_enc/dec engaged.
[    0.565587] AES CTR mode by8 optimization enabled
[    0.572481] scsi host0: ahci
[    0.572631] scsi host1: ahci
[    0.572788] scsi host2: ahci
[    0.573689] libphy: r8169: probed
[    0.573845] r8169 0000:02:00.0 eth0: RTL8168g/8111g, 64:00:6a:24:3b:d2, XID 4c0, IRQ 28
[    0.573846] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    0.573858] scsi host3: ahci
[    0.574948] scsi host4: ahci
[    0.575079] scsi host5: ahci
[    0.575115] ata1: SATA max UDMA/133 abar m2048@0xf7d1a000 port 0xf7d1a100 irq 27
[    0.575117] ata2: DUMMY
[    0.575117] ata3: DUMMY
[    0.575118] ata4: DUMMY
[    0.575119] ata5: DUMMY
[    0.575120] ata6: SATA max UDMA/133 abar m2048@0xf7d1a000 port 0xf7d1a380 irq 27
[    0.591361] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    0.597781] [drm] PipeC fused off
[    0.597790] checking generic (e0000000 300000) vs hw (e0000000 10000000)
[    0.597791] fb0: switching to inteldrmfb from EFI VGA
[    0.597835] i915 0000:00:02.0: vgaarb: deactivate vga console
[    0.606484] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    0.606485] [drm] Driver supports precise vblank timestamp query.
[    0.610515] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    0.631290] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0
[    0.635482] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    0.635992] acpi device:60: registered as cooling_device9
[    0.636078] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2
[    0.730428] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.754430] usb 3-3: new low-speed USB device number 2 using xhci_hcd
[    0.754436] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    0.886916] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.04
[    0.886917] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    0.887147] hub 1-1:1.0: USB hub found
[    0.887245] hub 1-1:1.0: 4 ports detected
[    0.890479] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.890492] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    0.892732] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    0.892734] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    0.892735] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    0.892985] ata6.00: ATA-8: LITEONIT LCS-128M6S 2.5 7mm 128GB, DC7110E, max UDMA/133
[    0.892986] ata6.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    0.893455] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    0.893456] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    0.893457] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    0.893673] ata1.00: ATA-10: IRP-SSDPR-S25C-512, SCFM22.3, max UDMA/133
[    0.893674] ata1.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    0.893678] ata6.00: configured for UDMA/133
[    0.893806] ata1.00: configured for UDMA/133
[    0.893929] scsi 0:0:0:0: Direct-Access     ATA      IRP-SSDPR-S25C-5 22.3 PQ: 0 ANSI: 5
[    0.894073] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    0.894122] sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB)
[    0.894128] sd 0:0:0:0: [sda] Write Protect is off
[    0.894129] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.894139] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.894180] scsi 5:0:0:0: Direct-Access     ATA      LITEONIT LCS-128 10E  PQ: 0 ANSI: 5
[    0.894269] sd 5:0:0:0: Attached scsi generic sg1 type 0
[    0.894303] sd 5:0:0:0: [sdb] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[    0.894311] sd 5:0:0:0: [sdb] Write Protect is off
[    0.894312] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    0.894323] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.910890]  sdb: sdb1 sdb2 sdb3
[    0.911227] sd 5:0:0:0: [sdb] Attached SCSI disk
[    0.911589]  sda: sda1 sda2
[    0.911734] usb 3-3: New USB device found, idVendor=c0f4, idProduct=07c0, bcdDevice= 1.10
[    0.911735] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    0.911736] usb 3-3: Product: usb keyboard
[    0.911738] usb 3-3: Manufacturer: USB
[    0.911816] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.914747] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04
[    0.914748] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    0.915000] hub 2-1:1.0: USB hub found
[    0.915021] hidraw: raw HID events driver (C) Jiri Kosina
[    0.916204] hub 2-1:1.0: 6 ports detected
[    0.919438] fbcon: i915drmfb (fb0) is primary device
[    0.919439] fbcon: Deferring console take-over
[    0.919441] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[    0.920094] usbcore: registered new interface driver usbhid
[    0.920094] usbhid: USB HID core driver
[    0.921713] input: USB usb keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:C0F4:07C0.0001/input/input3
[    0.978589] hid-generic 0003:C0F4:07C0.0001: input,hidraw0: USB HID v1.10 Keyboard [USB usb keyboard] on usb-0000:00:14.0-3/input0
[    0.978716] input: USB usb keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/0003:C0F4:07C0.0002/input/input4
[    1.042430] usb 3-4: new low-speed USB device number 3 using xhci_hcd
[    1.042477] input: USB usb keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/0003:C0F4:07C0.0002/input/input5
[    1.042509] hid-generic 0003:C0F4:07C0.0002: input,hidraw1: USB HID v1.10 Device [USB usb keyboard] on usb-0000:00:14.0-3/input1
[    1.201548] usb 3-4: New USB device found, idVendor=18f8, idProduct=0f97, bcdDevice= 1.00
[    1.201549] usb 3-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.201550] usb 3-4: Product: USB OPTICAL MOUSE
[    1.203969] input: USB OPTICAL MOUSE  as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:18F8:0F97.0003/input/input6
[    1.204022] hid-generic 0003:18F8:0F97.0003: input,hidraw2: USB HID v1.10 Mouse [USB OPTICAL MOUSE ] on usb-0000:00:14.0-4/input0
[    1.206495] input: USB OPTICAL MOUSE  Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/0003:18F8:0F97.0004/input/input7
[    1.270468] input: USB OPTICAL MOUSE  Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/0003:18F8:0F97.0004/input/input8
[    1.270519] hid-generic 0003:18F8:0F97.0004: input,hiddev0,hidraw3: USB HID v1.10 Keyboard [USB OPTICAL MOUSE ] on usb-0000:00:14.0-4/input1
[    1.398430] tsc: Refined TSC clocksource calibration: 3292.375 MHz
[    1.398434] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2f75298baf3, max_idle_ns: 440795322961 ns
[    1.398442] clocksource: Switched to clocksource tsc
[    1.406428] usb 3-6: new high-speed USB device number 4 using xhci_hcd
[    1.555694] usb 3-6: New USB device found, idVendor=23c5, idProduct=1478, bcdDevice= 4.09
[    1.555696] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.555697] usb 3-6: Product: web camera
[    1.555698] usb 3-6: Manufacturer: Xiongmai
[    1.555698] usb 3-6: SerialNumber: 12345678
[    1.882447] raid6: avx2x4   gen() 32382 MB/s
[    1.930444] raid6: avx2x4   xor() 19241 MB/s
[    1.978446] raid6: avx2x2   gen() 29112 MB/s
#4
1
Better response on post RE: Brak podświetlenia klawiatury Tracer KTM46710Chodzi raczej o długość wyniku dmesg.

Zdaje się, że pastebinit ma chwilowy problem. Wstrzymaj się. Smile
#5
0
Kod:
[    2.026446] raid6: avx2x2   xor() 17323 MB/s
[    2.074445] raid6: avx2x1   gen() 24188 MB/s
[    2.122446] raid6: avx2x1   xor() 16388 MB/s
[    2.170446] raid6: sse2x4   gen() 18107 MB/s
[    2.218448] raid6: sse2x4   xor() 10981 MB/s
[    2.266447] raid6: sse2x2   gen() 15404 MB/s
[    2.314446] raid6: sse2x2   xor()  9792 MB/s
[    2.362446] raid6: sse2x1   gen() 12726 MB/s
[    2.410445] raid6: sse2x1   xor()  8898 MB/s
[    2.410446] raid6: using algorithm avx2x4 gen() 32382 MB/s
[    2.410446] raid6: .... xor() 19241 MB/s, rmw enabled
[    2.410447] raid6: using avx2x2 recovery algorithm
[    2.412697] xor: automatically using best checksumming function   avx      
[    2.425696] Btrfs loaded, crc32c=crc32c-intel
[    2.483234] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    2.612739] systemd[1]: Inserted module 'autofs4'
[    2.631909] systemd[1]: systemd 245.4-4ubuntu3.5 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    2.650583] systemd[1]: Detected architecture x86-64.
[    2.675217] systemd[1]: Set hostname to <dell-OptiPlex-3020>.
[    2.737386] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
[    2.775647] systemd[1]: Created slice system-modprobe.slice.
[    2.775873] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    2.776053] systemd[1]: Created slice User and Session Slice.
[    2.776095] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    2.776231] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    2.776258] systemd[1]: Reached target User and Group Name Lookups.
[    2.776268] systemd[1]: Reached target Remote File Systems.
[    2.776274] systemd[1]: Reached target Slices.
[    2.776329] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    2.776390] systemd[1]: Listening on LVM2 poll daemon socket.
[    2.776882] systemd[1]: Listening on Syslog Socket.
[    2.778007] systemd[1]: Listening on Process Core Dump Socket.
[    2.778071] systemd[1]: Listening on fsck to fsckd communication Socket.
[    2.778109] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    2.778234] systemd[1]: Listening on Journal Audit Socket.
[    2.778296] systemd[1]: Listening on Journal Socket (/dev/log).
[    2.778361] systemd[1]: Listening on Journal Socket.
[    2.778432] systemd[1]: Listening on udev Control Socket.
[    2.778496] systemd[1]: Listening on udev Kernel Socket.
[    2.779173] systemd[1]: Mounting Huge Pages File System...
[    2.779862] systemd[1]: Mounting POSIX Message Queue File System...
[    2.780609] systemd[1]: Mounting Kernel Debug File System...
[    2.781274] systemd[1]: Mounting Kernel Trace File System...
[    2.782275] systemd[1]: Starting Journal Service...
[    2.783026] systemd[1]: Starting Availability of block devices...
[    2.783887] systemd[1]: Starting Set the console keyboard layout...
[    2.784665] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    2.785334] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    2.785359] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
[    2.785879] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    2.785898] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[    2.787044] systemd[1]: Starting Load Kernel Modules...
[    2.787740] systemd[1]: Starting Remount Root and Kernel File Systems...
[    2.788435] systemd[1]: Starting udev Coldplug all Devices...
[    2.789117] systemd[1]: Starting Uncomplicated firewall...
[    2.790411] systemd[1]: Mounted Huge Pages File System.
[    2.790573] systemd[1]: Mounted POSIX Message Queue File System.
[    2.790676] systemd[1]: Mounted Kernel Debug File System.
[    2.790769] systemd[1]: Mounted Kernel Trace File System.
[    2.791203] systemd[1]: Finished Availability of block devices.
[    2.791740] systemd[1]: Finished Create list of static device nodes for the current kernel.
[    2.792172] systemd[1]: Finished Uncomplicated firewall.
[    2.802209] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[    2.805088] systemd[1]: Finished Remount Root and Kernel File Systems.
[    2.805811] systemd[1]: Activating swap /swapfile...
[    2.806078] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[    2.806121] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[    2.806856] systemd[1]: Starting Load/Save Random Seed...
[    2.807557] systemd[1]: Starting Create System Users...
[    2.807714] lp: driver loaded but no devices found
[    2.816302] ppdev: user-space parallel port driver
[    2.817429] systemd[1]: Finished Load/Save Random Seed.
[    2.820649] systemd[1]: Finished Load Kernel Modules.
[    2.821485] systemd[1]: Mounting FUSE Control File System...
[    2.822273] systemd[1]: Mounting Kernel Configuration File System...
[    2.823378] systemd[1]: Starting Apply Kernel Variables...
[    2.824190] systemd[1]: Mounted FUSE Control File System.
[    2.825890] systemd[1]: Mounted Kernel Configuration File System.
[    2.827213] systemd[1]: Finished Create System Users.
[    2.827982] systemd[1]: Starting Create Static Device Nodes in /dev...
[    2.836968] systemd[1]: Finished Create Static Device Nodes in /dev.
[    2.837854] systemd[1]: Starting udev Kernel Device Manager...
[    2.838989] systemd[1]: Finished Apply Kernel Variables.
[    2.847781] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[    2.860850] systemd[1]: Finished Set the console keyboard layout.
[    2.860962] systemd[1]: Reached target Local File Systems (Pre).
[    2.866605] systemd[1]: Started Journal Service.
[    2.872606] systemd-journald[335]: Received client request to flush runtime journal.
[    2.878548] Adding 2097148k swap on /swapfile.  Priority:-2 extents:6 across:2260988k SSFS
[    3.171135] mc: Linux media interface: v0.10
[    3.212485] videodev: Linux video capture interface: v2.00
[    3.247029] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.3)
[    3.250701] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input10
[    3.250796] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    3.250797] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    3.250797] RAPL PMU: hw unit of domain package 2^-14 Joules
[    3.250798] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    3.250798] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    3.253684] uvcvideo: Found UVC 1.10 device web camera (23c5:1478)
[    3.261672] input: web camera: UVC Camera as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/input/input11
[    3.261731] usbcore: registered new interface driver uvcvideo
[    3.261731] USB Video Class driver (1.1.1)
[    3.370770] intel_rapl_common: Found RAPL domain package
[    3.370771] intel_rapl_common: Found RAPL domain core
[    3.370772] intel_rapl_common: Found RAPL domain uncore
[    3.370773] intel_rapl_common: Found RAPL domain dram
[    3.370775] intel_rapl_common: RAPL package-0 domain package locked by BIOS
[    3.370778] intel_rapl_common: RAPL package-0 domain dram locked by BIOS
[    3.393419] usbcore: registered new interface driver snd-usb-audio
[    3.394024] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
[    3.394189] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    3.402672] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[    3.402718] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[    3.402758] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[    3.412626] snd_hda_codec_realtek hdaudioC2D2: autoconfig for ALC3220: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line
[    3.412628] snd_hda_codec_realtek hdaudioC2D2:    speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
[    3.412629] snd_hda_codec_realtek hdaudioC2D2:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[    3.412629] snd_hda_codec_realtek hdaudioC2D2:    mono: mono_out=0x0
[    3.412630] snd_hda_codec_realtek hdaudioC2D2:    inputs:
[    3.412631] snd_hda_codec_realtek hdaudioC2D2:      Front Mic=0x1a
[    3.412632] snd_hda_codec_realtek hdaudioC2D2:      Rear Mic=0x18
[    3.458990] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card2/input15
[    3.459034] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card2/input16
[    3.459063] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card2/input17
[    3.459091] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card2/input18
[    3.508204] audit: type=1400 audit(1616435992.565:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=602 comm="apparmor_parser"
[    3.510876] audit: type=1400 audit(1616435992.569:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=607 comm="apparmor_parser"
[    3.510879] audit: type=1400 audit(1616435992.569:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=607 comm="apparmor_parser"
[    3.510881] audit: type=1400 audit(1616435992.569:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=607 comm="apparmor_parser"
[    3.511947] audit: type=1400 audit(1616435992.569:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=601 comm="apparmor_parser"
[    3.516345] audit: type=1400 audit(1616435992.573:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=608 comm="apparmor_parser"
[    3.516995] audit: type=1400 audit(1616435992.573:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=599 comm="apparmor_parser"
[    3.516996] audit: type=1400 audit(1616435992.573:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=599 comm="apparmor_parser"
[    3.516998] audit: type=1400 audit(1616435992.573:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=599 comm="apparmor_parser"
[    3.851910] Generic FE-GE Realtek PHY r8169-200:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE)
[    3.979304] r8169 0000:02:00.0 enp2s0: Link is Down
[    4.068138] fbcon: Taking over console
[    4.100805] Console: switching to colour frame buffer device 240x75
[    6.684937] r8169 0000:02:00.0 enp2s0: Link is Up - 1Gbps/Full - flow control rx/tx
[    6.684956] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[ 3967.808420] perf: interrupt took too long (2539 > 2500), lowering kernel.perf_event_max_sample_rate to 78750
[ 6321.016477] perf: interrupt took too long (3199 > 3173), lowering kernel.perf_event_max_sample_rate to 62500
dell@dell-OptiPlex-3020:~$
a to druga część
#6
1
Better response on post RE: Brak podświetlenia klawiatury Tracer KTM46710Dobra, a nie mogliście poprosić od dmesg -w ?

https://forum.linuxmint.pl/showthread.ph...79#pid1079
#7
0
Kod:
[ 3967.808420] perf: interrupt took too long (2539 > 2500), lowering kernel.perf_event_max_sample_rate to 78750
[ 6321.016477] perf: interrupt took too long (3199 > 3173), lowering kernel.perf_event_max_sample_rate to 62500
[ 8991.182385] usb 3-4: USB disconnect, device number 3
[ 9009.298762] usb 3-4: new low-speed USB device number 5 using xhci_hcd
[ 9009.450306] usb 3-4: New USB device found, idVendor=18f8, idProduct=0f97, bcdDevice= 1.00
[ 9009.450312] usb 3-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 9009.450315] usb 3-4: Product: USB OPTICAL MOUSE
[ 9009.455570] input: USB OPTICAL MOUSE  as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:18F8:0F97.0005/input/input19
[ 9009.455980] hid-generic 0003:18F8:0F97.0005: input,hidraw2: USB HID v1.10 Mouse [USB OPTICAL MOUSE ] on usb-0000:00:14.0-4/input0
[ 9009.459044] input: USB OPTICAL MOUSE  Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/0003:18F8:0F97.0006/input/input20
[ 9009.519142] input: USB OPTICAL MOUSE  Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/0003:18F8:0F97.0006/input/input21
[ 9009.519602] hid-generic 0003:18F8:0F97.0006: input,hiddev0,hidraw3: USB HID v1.10 Keyboard [USB OPTICAL MOUSE ] on usb-0000:00:14.0-4/input1
[ 9060.082736] usb 3-3: USB disconnect, device number 2
[ 9064.951274] usb 3-3: new low-speed USB device number 6 using xhci_hcd
[ 9065.104548] usb 3-3: New USB device found, idVendor=c0f4, idProduct=07c0, bcdDevice= 1.10
[ 9065.104554] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 9065.104557] usb 3-3: Product: usb keyboard
[ 9065.104560] usb 3-3: Manufacturer: USB
[ 9065.109066] input: USB usb keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:C0F4:07C0.0007/input/input23
[ 9065.167752] hid-generic 0003:C0F4:07C0.0007: input,hidraw0: USB HID v1.10 Keyboard [USB usb keyboard] on usb-0000:00:14.0-3/input0
[ 9065.170293] input: USB usb keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/0003:C0F4:07C0.0008/input/input24
[ 9065.227644] input: USB usb keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/0003:C0F4:07C0.0008/input/input25
[ 9065.228051] hid-generic 0003:C0F4:07C0.0008: input,hidraw1: USB HID v1.10 Device [USB usb keyboard] on usb-0000:00:14.0-3/input1
doklejam kod to co wypluło z końca - bo początek wygląda podobnie jak to co na początku wklejałem (dobrze myślę??)...
ps. wpierw odpiąłem myszkę przez przypadek, potem ja podpiąłem i odpiąłem klawiaturę a następnie podpiąłem klawiaturę z powrotem do kompa

Dodano po pewnym czasie:
po wpisaniu komendy
Kod:
xset led on
klawisze się zaświecają.
z OFF się wyłączają.

Wlazłem do programu systemowego "Klawiatura", i próbując przypisać skróty do podświetlenia zorientowałem się:
-Skróty>System>Sprzęt>Przełącz podświetlenie klawiszy
ta opcja nie działa jaką bym funkcje nie dodał;
- Nie mogę przypisać żadnego skrótu z klawiszem "FN";
- Nie wiem jak pod jednym skrótem przypisać przełączanie podświetlenia (bo umiem osobny skrót stworzyć do załączenia i osobny do wyłączenia podświetlenia);
- Gdy przypisałem nowe skróty i załączam podświetlenie, to na klawiaturze podświetla się trzecia ikonka z Windowsem i kłódka (koło załączenia klawiatury numerycznej <NumLock>, oraz załączenia pisania dużych liter<CapsLock>), a w tedy nie mam klawiatury numerycznej - działa jako myszka - przesuwa kursor

Dodano po pewnym czasie:
A zapomniałem napisać, nie dało by się to zrobić tak, aby przy załączeniu kompa już była podświetlona klawiatura - ciężko w ciemności wpisywać hasło jak klawiatura nie jest podświetlana (skór dopiero działa jak zaloguje się w Mincie)
#8
1
Better response on post RE: Brak podświetlenia klawiatury Tracer KTM46710Polecenie xset led on możesz dodać do programów startowych -> +, polecenie użytkownika... tylko raczej nie zaczyta się przed zalogowaniem... bo to polecenie _użytkownika_.

Klawiatura - własne skróty, dodaj i trzeba by mały skrypcik napisać uruchamiający polecenie xset, wrzucić go do /home, nadać uprawienia i skrótem klawiaturowym wywoływać go... dasz radę?

Skrót może... Ctrl+Alt+K? Zdaje się, że jest wolny.
#9
0
(24-03-2021, 18:46)yahoob3 napisał(a): Polecenie xset led on możesz dodać do programów startowych -> +, polecenie użytkownika... tylko raczej nie zaczyta się przed zalogowaniem... bo to polecenie _użytkownika_.

Klawiatura - własne skróty, dodaj i trzeba by mały skrypcik napisać uruchamiający polecenie xset, wrzucić go do /home, nadać uprawienia i skrótem klawiaturowym wywoływać go... dasz radę?

Skrót może... Ctrl+Alt+K? Zdaje się, że jest wolny.

o_O eee... ja nawet zielony nie jestem - jeśli chodzi o skrypty i linuxa... ze mną jak z małym dzieckiem - za rączkę ;P

skoro mam "Systemowo" przypisane podświetlenie do ScrollLock+FN - tylko że nie działa, to xset led on przypisałem pod Ctrl+ScrollLock a xset led off przypisałem pod Win+ScrollLock...

Tylko że ScrollLock mi nie działa ani przycisk FN. FN bo nie mogę żadnego skrótu przypisać z tym klawiszem, a ScrollLock ile bym razy nie wcisnął nie zaświeca się dioda/ikonka oznaczająca włączanie tej funkcji (koło NumLocka i CapsLocka) - ona zaświeca się i załącza gdy załączę podświetlenie :/ ma ktoś na to a jakiś patent? czy klawiaturę oddać? tylko jaka możecie polecić w miarę tanią z podświetleniem/z podobnym ułożeniem klawiszy (chodzi o Enter i Shift)?

Bo, słabo się pisze hasło przy logowaniu gdy jest ciemno a klawiatura jest nie podświetlona...
#10
1
Better response on post RE: Brak podświetlenia klawiatury Tracer KTM46710A, tak sobie pomyślałem... w BIOSie nie masz przypadkiem jakiegoś słicza do tych lampek? Smile


Skocz do:




Użytkownicy przeglądający ten wątek: 2 gości