0
Kod:
irena@irena-HP-255-G1-Notebook-PC:~$ lsusb
Bus 002 Device 002: ID 04f2:b34f Chicony Electronics Co., Ltd HP Truevision HD
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 003: ID 0cf3:3121 Qualcomm Atheros Communications
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 008: ID 15f4:0131 HanfTek dvbt2
Bus 001 Device 007: ID 058f:6387 Alcor Micro Corp. Flash Drive
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 003: ID 062a:4101 MosArt Semiconductor Corp. Wireless Keyboard/Mouse
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubDodano po pewnym czasie:
irena@irena-HP-255-G1-Notebook-PC:~$ dmesg
[ 0.000000] Linux version 5.4.0-121-generic (buildd@lcy02-amd64-013) (gcc version 9.4.0 (Ubuntu 9.4.0-1ubuntu1~20.04.1)) #137-Ubuntu SMP Wed Jun 15 13:33:07 UTC 2022 (Ubuntu 5.4.0-121.137-generic 5.4.189)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-121-generic root=UUID=ae680bad-a508-4e34-961c-48fde03c05bc ro quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] zhaoxin Shanghai
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[
[ 4.765127] ata1.00: ATA-8: WDC WD5000LPVT-80G33T2, 01.01A01, max UDMA/133
[ 4.765138] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 4.767198] ata1.00: configured for UDMA/133
[ 4.767917] scsi 0:0:0:0: Direct-Access ATA WDC WD5000LPVT-8 1A01 PQ: 0 ANSI: 5
[ 4.768370] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 4.768415] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 4.768504] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 4.768549] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.768975] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 4.768979] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 4.769012] sd 0:0:0:0: [sda] Write Protect is off
[ 4.769016] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.769071] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.775290] scsi 1:0:0:0: CD-ROM hp CDDVDW SN-208DB HH01 PQ: 0 ANSI: 5
[ 4.840689] sda: sda1 sda2
[ 4.851349] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.851357] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.860349] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.883182] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.883473] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 4.906851] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl, a0:d3:c1:96:5e:b9, XID 2c9, IRQ 30
[ 4.906858] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 4.916322] r8169 0000:03:00.0 eno1: renamed from eth0
[ 4.926577] psmouse serio1: synaptics: queried max coordinates: x [..5734], y [..4974]
[ 4.953279] psmouse serio1: synaptics: queried min coordinates: x [1222..], y [910..]
[ 4.990567] [drm] radeon kernel modesetting enabled.
[ 4.990691] radeon 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 0: 0xe0000000 -> 0xefffffff
[ 4.990696] radeon 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 2: 0xf0400000 -> 0xf043ffff
[ 4.990700] checking generic (e0000000 420000) vs hw (e0000000 10000000)
[ 4.990702] fb0: switching to radeondrmfb from EFI VGA
[ 4.991165] Console: switching to colour dummy device 80x25
[ 4.991278] radeon 0000:00:01.0: vgaarb: deactivate vga console
[ 4.992477] [drm] initializing kernel modesetting (PALM 0x1002:0x9809 0x103C:0x188B 0x00).
[ 4.992553] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000c3fff window]
[ 4.992561] caller pci_map_rom+0x71/0x1a0 mapping multiple BARs
[ 4.994127] ATOM BIOS: HP
[ 4.994263] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
[ 4.994268] radeon 0000:00:01.0: GTT: 1024M 0x0000000018000000 - 0x0000000057FFFFFF
[ 4.994277] [drm] Detected VRAM RAM=384M, BAR=256M
[ 4.994279] [drm] RAM width 32bits DDR
[ 4.994627] [TTM] Zone kernel: Available graphics memory: 1804240 KiB
[ 4.994631] [TTM] Initializing pool allocator
[ 4.994642] [TTM] Initializing DMA pool allocator
[ 4.994705] [drm] radeon: 384M of VRAM memory ready
[ 4.994708] [drm] radeon: 1024M of GTT memory ready.
[ 4.994743] [drm] Loading PALM Microcode
[ 4.995008] [drm] Internal thermal controller without fan control
[ 4.995126] [drm] Found smc ucode version: 0x00010601
[ 4.995202] [drm] radeon: dpm initialized
[ 4.995593] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 5.008021] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xf00173/0x240000/0xa2400/0x0, board id: 2068, fw id: 1028260
[ 5.024625] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
[ 5.024856] radeon 0000:00:01.0: WB enabled
[ 5.024864] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0x(____ptrval____)
[ 5.024868] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0x(____ptrval____)
[ 5.025330] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0x(____ptrval____)
[ 5.025334] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 5.025336] [drm] Driver supports precise vblank timestamp query.
[ 5.025339] radeon 0000:00:01.0: radeon: MSI limited to 32-bit
[ 5.025447] radeon 0000:00:01.0: radeon: using MSI.
[ 5.025490] [drm] radeon: irq initialized.
[ 5.041310] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 5.042815] [drm] ring test on 0 succeeded in 1 usecs
[ 5.042828] [drm] ring test on 3 succeeded in 3 usecs
[ 5.088599] [drm] ring test on 5 succeeded in 1 usecs
[ 5.108465] [drm] UVD initialized successfully.
[ 5.109438] [drm] ib test on ring 0 succeeded in 0 usecs
[ 5.109491] [drm] ib test on ring 3 succeeded in 0 usecs
[ 5.655416] [drm] ib test on ring 5 succeeded
[ 5.739219] [drm] radeon atom DIG backlight initialized
[ 5.739229] [drm] Radeon Display Connectors
[ 5.739233] [drm] Connector 0:
[ 5.739236] [drm] LVDS-1
[ 5.739237] [drm] HPD1
[ 5.739240] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 5.739242] [drm] Encoders:
[ 5.739243] [drm] LCD1: INTERNAL_UNIPHY
[ 5.739245] [drm] Connector 1:
[ 5.739246] [drm] HDMI-A-1
[ 5.739247] [drm] HPD2
[ 5.739250] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 5.739251] [drm] Encoders:
[ 5.739252] [drm] DFP1: INTERNAL_UNIPHY
[ 5.739254] [drm] Connector 2:
[ 5.739255] [drm] VGA-1
[ 5.739258] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[ 5.739259] [drm] Encoders:
[ 5.739260] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 6.173318] [drm] fb mappable at 0xE0366000
[ 6.173322] [drm] vram apper at 0xE0000000
[ 6.173324] [drm] size 4325376
[ 6.173326] [drm] fb depth is 24
[ 6.173327] [drm] pitch is 5632
[ 6.173872] fbcon: radeondrmfb (fb0) is primary device
[ 6.753332] Console: switching to colour frame buffer device 170x48
[ 6.760529] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[ 6.777340] [drm] Initialized radeon 2.50.0 20080528 for 0000:00:01.0 on minor 0
[ 7.535006] raid6: sse2x4 gen() 1391 MB/s
[ 7.582959] raid6: sse2x4 xor() 1061 MB/s
[ 7.630947] raid6: sse2x2 gen() 985 MB/s
[ 7.678951] raid6: sse2x2 xor() 1153 MB/s
[ 7.726993] raid6: sse2x1 gen() 985 MB/s
[ 7.774955] raid6: sse2x1 xor() 946 MB/s
[ 7.774957] raid6: using algorithm sse2x4 gen() 1391 MB/s
[ 7.774958] raid6: .... xor() 1061 MB/s, rmw enabled
[ 7.774961] raid6: using ssse3x2 recovery algorithm
[ 7.786919] xor: measuring software checksum speed
[ 7.822945] prefetch64-sse: 3241.000 MB/sec
[ 7.862942] generic_sse: 3025.000 MB/sec
[ 7.862945] xor: using function: prefetch64-sse (3241.000 MB/sec)
[ 7.930685] Btrfs loaded, crc32c=crc32c-generic
[ 8.622580] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 9.916101] crng init done
[ 9.916108] random: 7 urandom warning(s) missed due to ratelimiting
[ 11.121065] systemd[1]: Inserted module 'autofs4'
[ 14.158460] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 14.175508] systemd[1]: Detected architecture x86-64.
[ 14.222154] systemd[1]: Set hostname to <irena-HP-255-G1-Notebook-PC>.
[ 18.730681] systemd[1]: Created slice system-modprobe.slice.
[ 18.732230] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 18.733543] systemd[1]: Created slice User and Session Slice.
[ 18.733787] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 18.734440] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 18.734593] systemd[1]: Reached target User and Group Name Lookups.
[ 18.734651] systemd[1]: Reached target Remote File Systems.
[ 18.734688] systemd[1]: Reached target Slices.
[ 18.735089] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 18.735458] systemd[1]: Listening on LVM2 poll daemon socket.
[ 18.735701] systemd[1]: Listening on Syslog Socket.
[ 18.740455] systemd[1]: Listening on Process Core Dump Socket.
[ 18.740816] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 18.741002] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 18.741580] systemd[1]: Listening on Journal Audit Socket.
[ 18.741879] systemd[1]: Listening on Journal Socket (/dev/log).
[ 18.742225] systemd[1]: Listening on Journal Socket.
[ 18.742584] systemd[1]: Listening on udev Control Socket.
[ 18.742857] systemd[1]: Listening on udev Kernel Socket.
[ 18.747139] systemd[1]: Mounting Huge Pages File System...
[ 18.751750] systemd[1]: Mounting POSIX Message Queue File System...
[ 18.756818] systemd[1]: Mounting Kernel Debug File System...
[ 18.761581] systemd[1]: Mounting Kernel Trace File System...
[ 18.774867] systemd[1]: Starting Journal Service...
[ 18.781282] systemd[1]: Starting Availability of block devices...
[ 18.786520] systemd[1]: Starting Set the console keyboard layout...
[ 18.791387] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 18.800666] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 18.800857] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
[ 18.853352] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 18.853505] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 19.006187] systemd[1]: Starting Load Kernel Modules...
[ 19.010651] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 19.015840] systemd[1]: Starting udev Coldplug all Devices...
[ 19.021679] systemd[1]: Starting Uncomplicated firewall...
[ 19.028660] systemd[1]: Mounted Huge Pages File System.
[ 19.029234] systemd[1]: Mounted POSIX Message Queue File System.
[ 19.029635] systemd[1]: Mounted Kernel Debug File System.
[ 19.030026] systemd[1]: Mounted Kernel Trace File System.
[ 19.032199] systemd[1]: Finished Availability of block devices.
[ 19.034608] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 19.036897] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[ 19.257205] systemd[1]: Finished Uncomplicated firewall.
[ 19.476259] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 19.483276] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 19.490095] systemd[1]: Activating swap /swapfile...
[ 19.519025] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 19.519260] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 19.523134] systemd[1]: Starting Load/Save Random Seed...
[ 19.532522] systemd[1]: Starting Create System Users...
[ 19.812736] systemd[1]: Finished Set the console keyboard layout.
[ 19.891086] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS
[ 19.891334] systemd[1]: Activated swap /swapfile.
[ 19.891635] systemd[1]: Reached target Swap.
[ 20.230652] systemd[1]: Started Journal Service.
[ 20.547427] systemd-journald[277]: Received client request to flush runtime journal.
[ 20.667559] lp: driver loaded but no devices found
[ 20.774085] ppdev: user-space parallel port driver
[ 21.094069] IPMI message handler: version 39.2
[ 21.115236] ipmi device interface
[ 25.220012] input: HP Wireless hotkeys as /devices/virtual/input/input7
[ 26.364592] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 26.365778] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 26.648865] Bluetooth: Core ver 2.22
[ 26.648947] NET: Registered protocol family 31
[ 26.648949] Bluetooth: HCI device and connection manager initialized
[ 26.648961] Bluetooth: HCI socket layer initialized
[ 26.648965] Bluetooth: L2CAP socket layer initialized
[ 26.648975] Bluetooth: SCO socket layer initialized
[ 26.944527] usbcore: registered new interface driver btusb
[ 26.983077] mc: Linux media interface: v0.10
[ 27.218169] input: HP WMI hotkeys as /devices/virtual/input/input8
[ 27.282857] videodev: Linux video capture interface: v2.00
[ 27.303320] usb 4-2: USB disconnect, device number 2
[ 27.322663] usbcore: registered new interface driver ath3k
[ 27.367394] ath: phy0: WB335 1-ANT card detected
[ 27.367400] ath: phy0: Set BT/WLAN RX diversity capability
[ 27.379455] ath: phy0: Enable LNA combining
[ 27.381213] ath: phy0: ASPM enabled: 0x43
[ 27.381220] ath: EEPROM regdomain: 0x6a
[ 27.381222] ath: EEPROM indicates we should expect a direct regpair map
[ 27.381227] ath: Country alpha2 being used: 00
[ 27.381229] ath: Regpair used: 0x6a
[ 27.384859] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 27.387607] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffffb6a201480000, irq=17
[ 27.634743] kvm: disabled by bios
[ 27.766476] kvm: disabled by bios
[ 27.852514] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input9
[ 27.963071] usb 4-2: new full-speed USB device number 3 using ohci-pci
[ 28.035849] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type
peaker[ 28.035863] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 28.035867] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 28.035870] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 28.035872] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 28.035877] snd_hda_codec_realtek hdaudioC1D0: Mic=0x18
[ 28.035881] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12
[ 28.058128] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
[ 28.058300] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
[ 28.137425] uvcvideo: Found UVC 1.00 device HP Truevision HD (04f2:b34f)
[ 28.184243] usb 4-2: New USB device found, idVendor=0cf3, idProduct=3121, bcdDevice= 0.02
[ 28.184250] usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 28.195721] input: HP Truevision HD: HP Truevision as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1:1.0/input/input12
[ 28.195929] usbcore: registered new interface driver uvcvideo
[ 28.195932] USB Video Class driver (1.1.1)
[ 29.014713] ath9k 0000:07:00.0 wlo1: renamed from wlan0
[ 32.615648] audit: type=1400 audit(1656077745.295:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=546 comm="apparmor_parser"
[ 32.615661] audit: type=1400 audit(1656077745.295:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=546 comm="apparmor_parser"
[ 32.615667] audit: type=1400 audit(1656077745.295:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=546 comm="apparmor_parser"
[ 32.764635] audit: type=1400 audit(1656077745.443:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=551 comm="apparmor_parser"
[ 32.846680] audit: type=1400 audit(1656077745.523:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=552 comm="apparmor_parser"
[ 32.911320] audit: type=1400 audit(1656077745.591:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice" pid=547 comm="apparmor_parser"
[ 32.911333] audit: type=1400 audit(1656077745.591:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice//gpg" pid=547 comm="apparmor_parser"
[ 32.917876] audit: type=1400 audit(1656077745.595:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=553 comm="apparmor_parser"
[ 32.958391] audit: type=1400 audit(1656077745.635:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=554 comm="apparmor_parser"
[ 32.958403] audit: type=1400 audit(1656077745.635:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=554 comm="apparmor_parser"
[ 40.555875] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 40.555881] Bluetooth: BNEP filters: protocol multicast
[ 40.555893] Bluetooth: BNEP socket layer initialized
[ 40.800783] NET: Registered protocol family 38
[ 41.194877] kauditd_printk_skb: 12 callbacks suppressed
[ 41.194883] audit: type=1400 audit(1656077753.847:24): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=713 comm="cups-browsed" capability=23 capname="sys_nice"
[ 46.202684] RTL8211E Gigabit Ethernet r8169-0-300:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-0-300:00, irq=IGNORE)
[ 46.380909] r8169 0000:03:00.0 eno1: Link is Down
[ 48.295415] wlo1: authenticate with 08:a7:c0:64:54:71
[ 48.308497] wlo1: send auth to 08:a7:c0:64:54:71 (try 1/3)
[ 48.315480] wlo1: authenticated
[ 48.319082] wlo1: associate with 08:a7:c0:64:54:71 (try 1/3)
[ 48.323536] wlo1: RX AssocResp from 08:a7:c0:64:54:71 (capab=0x1411 status=0 aid=4)
[ 48.323754] wlo1: associated
[ 48.473716] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[ 67.087463] Bluetooth: RFCOMM TTY layer initialized
[ 67.087482] Bluetooth: RFCOMM socket layer initialized
[ 67.087509] Bluetooth: RFCOMM ver 1.11
[ 101.097452] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 101.261608] usb 1-1: New USB device found, idVendor=058f, idProduct=6387, bcdDevice= 1.00
[ 101.261617] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 101.261622] usb 1-1: Product: Mass Storage
[ 101.261626] usb 1-1: Manufacturer: Generic
[ 101.261630] usb 1-1: SerialNumber: F18319C2
[ 101.434277] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 101.449691] scsi host2: usb-storage 1-1:1.0
[ 101.451546] usbcore: registered new interface driver usb-storage
[ 101.577901] usbcore: registered new interface driver uas
[ 102.472397] scsi 2:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 4
[ 102.477479] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 102.478912] sd 2:0:0:0: [sdb] 61440000 512-byte logical blocks: (31.5 GB/29.3 GiB)
[ 102.480039] sd 2:0:0:0: [sdb] Write Protect is off
[ 102.480046] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 102.481148] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 102.504078] sdb: sdb1
[ 102.517257] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 108.892728] usb 3-3: new full-speed USB device number 2 using ohci-pci
[ 109.095816] usb 3-3: New USB device found, idVendor=062a, idProduct=4101, bcdDevice= 2.11
[ 109.095826] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 109.095830] usb 3-3: Product: 2.4G Keyboard Mouse
[ 109.095834] usb 3-3: Manufacturer: MOSART Semi.
[ 109.413603] hidraw: raw HID events driver (C) Jiri Kosina
[ 109.548581] usbcore: registered new interface driver usbhid
[ 109.548587] usbhid: USB HID core driver
[ 109.733161] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/0003:062A:4101.0001/input/input13
[ 109.795222] hid-generic 0003:062A:4101.0001: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:12.0-3/input0
[ 109.798556] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.1/0003:062A:4101.0002/input/input14
[ 109.799734] input: MOSART Semi. 2.4G Keyboard Mouse Consumer Control as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.1/0003:062A:4101.0002/input/input15
[ 109.857382] input: MOSART Semi. 2.4G Keyboard Mouse System Control as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.1/0003:062A:4101.0002/input/input16
[ 109.857665] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.1/0003:062A:4101.0002/input/input17
[ 109.858160] hid-generic 0003:062A:4101.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:12.0-3/input1
[ 284.664950] usb 1-1: USB disconnect, device number 2
[ 284.667835] blk_update_request: I/O error, dev sdb, sector 2049 op 0x1
WRITE) flags 0x0 phys_seg 1 prio class 0[ 284.667857] Buffer I/O error on dev sdb1, logical block 1, lost async page write
[ 284.667886] blk_update_request: I/O error, dev sdb, sector 32066 op 0x1
WRITE) flags 0x0 phys_seg 1 prio class 0[ 284.667894] Buffer I/O error on dev sdb1, logical block 30018, lost async page write
[ 284.761712] FAT-fs (sdb1): unable to read boot sector to mark fs as dirty
[ 294.788756] usb 3-3: USB disconnect, device number 2
[ 467.274053] usb 1-3: new high-speed USB device number 4 using ehci-pci
[ 467.438033] usb 1-3: New USB device found, idVendor=058f, idProduct=6387, bcdDevice= 1.00
[ 467.438044] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 467.438050] usb 1-3: Product: Mass Storage
[ 467.438055] usb 1-3: Manufacturer: Generic
[ 467.438060] usb 1-3: SerialNumber: F18319C2
[ 467.442143] usb-storage 1-3:1.0: USB Mass Storage device detected
[ 467.445589] scsi host2: usb-storage 1-3:1.0
[ 468.469230] scsi 2:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 4
[ 468.470680] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 468.472435] sd 2:0:0:0: [sdb] 61440000 512-byte logical blocks: (31.5 GB/29.3 GiB)
[ 468.473558] sd 2:0:0:0: [sdb] Write Protect is off
[ 468.473568] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 468.474840] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 468.500591] sdb: sdb1
[ 468.526417] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 469.218415] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 503.820690] usb 3-2: new full-speed USB device number 3 using ohci-pci
[ 504.016144] usb 3-2: New USB device found, idVendor=062a, idProduct=4101, bcdDevice= 2.11
[ 504.016156] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 504.016163] usb 3-2: Product: 2.4G Keyboard Mouse
[ 504.016168] usb 3-2: Manufacturer: MOSART Semi.
[ 504.026026] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/0003:062A:4101.0003/input/input18
[ 504.085945] hid-generic 0003:062A:4101.0003: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:12.0-2/input0
[ 504.093166] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.1/0003:062A:4101.0004/input/input19
[ 504.153752] input: MOSART Semi. 2.4G Keyboard Mouse Consumer Control as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.1/0003:062A:4101.0004/input/input20
[ 504.154620] input: MOSART Semi. 2.4G Keyboard Mouse System Control as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.1/0003:062A:4101.0004/input/input21
[ 504.155026] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.1/0003:062A:4101.0004/input/input22
[ 504.155983] hid-generic 0003:062A:4101.0004: input,hiddev0,hidraw1: USB HID v1.10 Mouse [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:12.0-2/input1
[ 505.992504] usb 1-1: new high-speed USB device number 6 using ehci-pci
[ 506.159628] usb 1-1: New USB device found, idVendor=15f4, idProduct=0131, bcdDevice= 1.00
[ 506.159639] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 506.159645] usb 1-1: Product: dvbt2
[ 506.159651] usb 1-1: Manufacturer: astrometadvbt2
[ 506.395204] usb 1-1: dvb_usb_v2: found a 'Astrometa DVB-T2' in warm state
[ 506.518985] usb 1-1: USB disconnect, device number 6
[ 506.521115] usbcore: registered new interface driver dvb_usb_rtl28xxu
[ 509.724730] usb 1-3: USB disconnect, device number 4
[ 509.725556] blk_update_request: I/O error, dev sdb, sector 2049 op 0x1
WRITE) flags 0x0 phys_seg 1 prio class 0[ 509.725570] Buffer I/O error on dev sdb1, logical block 1, lost async page write
[ 514.824245] usb 1-1: new high-speed USB device number 7 using ehci-pci
[ 514.988255] usb 1-1: New USB device found, idVendor=058f, idProduct=6387, bcdDevice= 1.00
[ 514.988266] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 514.988272] usb 1-1: Product: Mass Storage
[ 514.988277] usb 1-1: Manufacturer: Generic
[ 514.988282] usb 1-1: SerialNumber: F18319C2
[ 514.989602] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 514.990131] scsi host2: usb-storage 1-1:1.0
[ 516.019393] scsi 2:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 4
[ 516.020988] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 516.022631] sd 2:0:0:0: [sdb] 61440000 512-byte logical blocks: (31.5 GB/29.3 GiB)
[ 516.023776] sd 2:0:0:0: [sdb] Write Protect is off
[ 516.023786] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 516.025006] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 516.042794] sdb: sdb1
[ 516.063753] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 516.744960] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 527.511795] usb 1-3: new high-speed USB device number 8 using ehci-pci
[ 527.679162] usb 1-3: New USB device found, idVendor=15f4, idProduct=0131, bcdDevice= 1.00
[ 527.679173] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 527.679179] usb 1-3: Product: dvbt2
[ 527.679184] usb 1-3: Manufacturer: astrometadvbt2
[ 527.687762] usb 1-3: dvb_usb_v2: found a 'Astrometa DVB-T2' in warm state
[ 527.834883] usb 1-3: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 527.834918] dvbdev: DVB: registering new adapter (Astrometa DVB-T2)
[ 527.834930] usb 1-3: media controller created
[ 527.837540] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
[ 527.887861] i2c i2c-8: Added multiplexed i2c bus 9
[ 527.887876] rtl2832 8-0010: Realtek RTL2832 successfully attached
[ 527.950680] i2c i2c-8: cxd2841er_attach(): I2C adapter 00000000852314de SLVX addr 6e SLVT addr 6c
[ 527.955265] i2c i2c-8: cxd2841er_attach(): attaching CXD2837ER DVB-C/T/T2 frontend
[ 527.955280] i2c i2c-8: cxd2841er_attach(): chip ID 0xb1 OK.
[ 527.955296] usb 1-3: DVB: registering adapter 0 frontend 0 (Realtek RTL2832 (DVB-T))...
[ 527.955324] dvbdev: dvb_create_media_entity: media entity 'Realtek RTL2832 (DVB-T)' registered.
[ 527.955822] usb 1-3: DVB: registering adapter 0 frontend 1 (Sony CXD2837ER DVB-T/T2/C demodulator)...
[ 527.955833] dvbdev: dvb_create_media_entity: media entity 'Sony CXD2837ER DVB-T/T2/C demodulator' registered.
[ 528.024391] r820t 9-003a: creating new instance
[ 528.032156] r820t 9-003a: Rafael Micro r820t successfully identified
[ 528.032180] r820t 9-003a: attaching existing instance
[ 528.050858] r820t 9-003a: Rafael Micro r820t successfully identified
[ 528.079700] rtl2832_sdr rtl2832_sdr.1.auto: Registered as swradio0
[ 528.079707] rtl2832_sdr rtl2832_sdr.1.auto: Realtek RTL2832 SDR attached
[ 528.079711] rtl2832_sdr rtl2832_sdr.1.auto: SDR API is still slightly experimental and functionality changes may follow
[ 528.088380] Registered IR keymap rc-empty
[ 528.088548] rc rc0: Astrometa DVB-T2 as /devices/pci0000:00/0000:00:12.2/usb1/1-3/rc/rc0
[ 528.088749] rc rc0: lirc_dev: driver dvb_usb_rtl28xxu registered at minor = 0, raw IR receiver, no transmitter
[ 528.088867] input: Astrometa DVB-T2 as /devices/pci0000:00/0000:00:12.2/usb1/1-3/rc/rc0/input23
[ 528.089395] usb 1-3: dvb_usb_v2: schedule remote query interval to 200 msecs
[ 528.098347] usb 1-3: dvb_usb_v2: 'Astrometa DVB-T2' successfully initialized and connected
Część tekstu wyciąłem, ponieważ był zbyt długi.
Mam nadzieję, że najistotniejszy fragment jest na końcu.