Zaloguj się

Xan666 · 13-02-2025, 00:31

(12-02-2025, 21:21)mati75 napisał(a): Urządzenie dostało adres?

Kod:
ip a

Urządzenie Repeater dostało adres i mogę się do niego normalnie logować z przeglądarki: 192.168.0.94

Laptop: Nie, nie dostaje w ogóle adresu.

***mati75*** · 13-02-2025, 09:39

0

To teraz na laptopie, jak podłączysz się do sieci repeatera:

Kod:
sudo dhpcd wlp3s0

Jak nie dostanie adresu

Kod:
sudo dmesg -T | tail -100

Xan666 · (Ten post był ostatnio modyfikowany: 13-02-2025, 10:25 przez Xan666.)

0

Kod:
sudo dhcpcd wlp3s0                                                                            

dhcpcd-10.0.6 starting

wlp3s0: connected to Access Point: Graveyard 2.4 GHz_EXT

DUID 00:01:00:01:2f:40:65:50:80:a5:89:97:f2:85

wlp3s0: IAID 89:97:f2:85

wlp3s0: soliciting a DHCP lease

wlp3s0: offered 192.168.0.87 from 192.168.0.1

wlp3s0: probing for an IPv4LL address

wlp3s0: failed to request the lease

wlp3s0: soliciting a DHCP lease

wlp3s0: using IPv4LL address 169.254.43.88

wlp3s0: adding route to 169.254.0.0/16

wlp3s0: adding default route

Dropped protocol specifier '.ipv4ll' from 'wlp3s0.ipv4ll'. Using 'wlp3s0' (ifindex=3).

Kod:
sudo dmesg -T | tail -100                                                                    

[czw lut 13 09:04:41 2025] ath: Regpair used: 0x37

[czw lut 13 09:04:41 2025] ath: regdomain 0x8268 dynamically updated by country element

[czw lut 13 09:04:41 2025] Bluetooth: MGMT ver 1.22

[czw lut 13 09:04:41 2025] NET: Registered PF_ALG protocol family

[czw lut 13 09:04:41 2025] Bluetooth: hci0: Bad flag given (0x1) vs supported (0x0)

[czw lut 13 09:04:41 2025] wlp3s0: Limiting TX power to 20 (20 - 0) dBm as advertised by b0:b3:69:78:46:43

[czw lut 13 09:04:43 2025] fbcon: Taking over console

[czw lut 13 09:04:43 2025] Console: switching to colour frame buffer device 170x48

[czw lut 13 09:04:50 2025] systemd-journald[375]: /var/log/journal/437f8d32a7e048769a9c74647712f488/user-1000.journal: Journal file uses a different sequence number ID, rotating.

[czw lut 13 09:04:51 2025] Bluetooth: RFCOMM TTY layer initialized

[czw lut 13 09:04:51 2025] Bluetooth: RFCOMM socket layer initialized

[czw lut 13 09:04:51 2025] Bluetooth: RFCOMM ver 1.11

[czw lut 13 09:05:05 2025] warning: `conky' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211

[czw lut 13 09:05:07 2025] hid: raw HID events driver (C) Jiri Kosina

[czw lut 13 09:05:07 2025] input: DARK CORE RGB PRO Mouse as /devices/virtual/misc/uhid/0005:1B80:1B1C.0001/input/input20

[czw lut 13 09:05:07 2025] input: DARK CORE RGB PRO Keyboard as /devices/virtual/misc/uhid/0005:1B80:1B1C.0001/input/input21

[czw lut 13 09:05:07 2025] hid-generic 0005:1B80:1B1C.0001: input,hidraw0: BLUETOOTH HID v5.00 Mouse [DARK CORE RGB PRO] on 80:a5:89:97:f2:84

[czw lut 13 09:05:11 2025] wlp3s0: deauthenticating from b0:b3:69:78:46:43 by local choice (Reason: 3=DEAUTH_LEAVING)

[czw lut 13 09:05:11 2025] wlp3s0: 80 MHz not supported, disabling VHT

[czw lut 13 09:05:11 2025] wlp3s0: authenticate with 98:25:4a:79:6d:bc (local address=80:a5:89:97:f2:85)

[czw lut 13 09:05:11 2025] wlp3s0: send auth to 98:25:4a:79:6d:bc (try 1/3)

[czw lut 13 09:05:11 2025] wlp3s0: authenticated

[czw lut 13 09:05:11 2025] wlp3s0: associate with 98:25:4a:79:6d:bc (try 1/3)

[czw lut 13 09:05:11 2025] wlp3s0: RX AssocResp from 98:25:4a:79:6d:bc (capab=0x1c11 status=0 aid=4)

[czw lut 13 09:05:11 2025] wlp3s0: associated

[czw lut 13 09:05:11 2025] ath: EEPROM regdomain: 0x8114

[czw lut 13 09:05:11 2025] ath: EEPROM indicates we should expect a country code

[czw lut 13 09:05:11 2025] ath: doing EEPROM country->regdmn map search

[czw lut 13 09:05:11 2025] ath: country maps to regdmn code: 0x37

[czw lut 13 09:05:11 2025] ath: Country alpha2 being used: DE

[czw lut 13 09:05:11 2025] ath: Regpair used: 0x37

[czw lut 13 09:05:11 2025] ath: regdomain 0x8114 dynamically updated by country element

[czw lut 13 09:05:11 2025] wlp3s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 98:25:4a:79:6d:bc

[czw lut 13 09:05:56 2025] wlp3s0: deauthenticating from 98:25:4a:79:6d:bc by local choice (Reason: 3=DEAUTH_LEAVING)

[czw lut 13 09:05:57 2025] wlp3s0: 80 MHz not supported, disabling VHT

[czw lut 13 09:05:58 2025] wlp3s0: authenticate with b0:b3:69:78:46:43 (local address=80:a5:89:97:f2:85)

[czw lut 13 09:05:58 2025] wlp3s0: send auth to b0:b3:69:78:46:43 (try 1/3)

[czw lut 13 09:05:58 2025] wlp3s0: authenticate with b0:b3:69:78:46:43 (local address=80:a5:89:97:f2:85)

[czw lut 13 09:05:58 2025] wlp3s0: send auth to b0:b3:69:78:46:43 (try 1/3)

[czw lut 13 09:05:58 2025] wlp3s0: authenticated

[czw lut 13 09:05:58 2025] wlp3s0: associate with b0:b3:69:78:46:43 (try 1/3)

[czw lut 13 09:05:58 2025] wlp3s0: RX AssocResp from b0:b3:69:78:46:43 (capab=0x1431 status=0 aid=8)

[czw lut 13 09:05:58 2025] wlp3s0: associated

[czw lut 13 09:05:58 2025] ath: EEPROM regdomain: 0x8268

[czw lut 13 09:05:58 2025] ath: EEPROM indicates we should expect a country code

[czw lut 13 09:05:58 2025] ath: doing EEPROM country->regdmn map search

[czw lut 13 09:05:58 2025] ath: country maps to regdmn code: 0x37

[czw lut 13 09:05:58 2025] ath: Country alpha2 being used: PL

[czw lut 13 09:05:58 2025] ath: Regpair used: 0x37

[czw lut 13 09:05:58 2025] ath: regdomain 0x8268 dynamically updated by country element

[czw lut 13 09:05:58 2025] wlp3s0: Limiting TX power to 20 (20 - 0) dBm as advertised by b0:b3:69:78:46:43

[czw lut 13 09:08:42 2025] wlp3s0: deauthenticating from b0:b3:69:78:46:43 by local choice (Reason: 3=DEAUTH_LEAVING)

[czw lut 13 09:08:43 2025] wlp3s0: 80 MHz not supported, disabling VHT

[czw lut 13 09:08:43 2025] wlp3s0: authenticate with 98:25:4a:79:6d:bc (local address=80:a5:89:97:f2:85)

[czw lut 13 09:08:43 2025] wlp3s0: send auth to 98:25:4a:79:6d:bc (try 1/3)

[czw lut 13 09:08:43 2025] wlp3s0: authenticated

[czw lut 13 09:08:43 2025] wlp3s0: associate with 98:25:4a:79:6d:bc (try 1/3)

[czw lut 13 09:08:43 2025] wlp3s0: RX AssocResp from 98:25:4a:79:6d:bc (capab=0x1c11 status=0 aid=4)

[czw lut 13 09:08:43 2025] wlp3s0: associated

[czw lut 13 09:08:43 2025] ath: EEPROM regdomain: 0x8114

[czw lut 13 09:08:43 2025] ath: EEPROM indicates we should expect a country code

[czw lut 13 09:08:43 2025] ath: doing EEPROM country->regdmn map search

[czw lut 13 09:08:43 2025] ath: country maps to regdmn code: 0x37

[czw lut 13 09:08:43 2025] ath: Country alpha2 being used: DE

[czw lut 13 09:08:43 2025] ath: Regpair used: 0x37

[czw lut 13 09:08:43 2025] ath: regdomain 0x8114 dynamically updated by country element

[czw lut 13 09:08:43 2025] wlp3s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 98:25:4a:79:6d:bc

[czw lut 13 09:09:28 2025] wlp3s0: deauthenticating from 98:25:4a:79:6d:bc by local choice (Reason: 3=DEAUTH_LEAVING)

[czw lut 13 09:09:30 2025] wlp3s0: 80 MHz not supported, disabling VHT

[czw lut 13 09:09:30 2025] wlp3s0: authenticate with 98:25:4a:79:6d:bc (local address=80:a5:89:97:f2:85)

[czw lut 13 09:09:30 2025] wlp3s0: send auth to 98:25:4a:79:6d:bc (try 1/3)

[czw lut 13 09:09:30 2025] wlp3s0: authenticated

[czw lut 13 09:09:30 2025] wlp3s0: associate with 98:25:4a:79:6d:bc (try 1/3)

[czw lut 13 09:09:30 2025] wlp3s0: RX AssocResp from 98:25:4a:79:6d:bc (capab=0x1c11 status=0 aid=4)

[czw lut 13 09:09:30 2025] wlp3s0: associated

[czw lut 13 09:09:30 2025] ath: EEPROM regdomain: 0x8114

[czw lut 13 09:09:30 2025] ath: EEPROM indicates we should expect a country code

[czw lut 13 09:09:30 2025] ath: doing EEPROM country->regdmn map search

[czw lut 13 09:09:30 2025] ath: country maps to regdmn code: 0x37

[czw lut 13 09:09:30 2025] ath: Country alpha2 being used: DE

[czw lut 13 09:09:30 2025] ath: Regpair used: 0x37

[czw lut 13 09:09:30 2025] ath: regdomain 0x8114 dynamically updated by country element

[czw lut 13 09:09:30 2025] wlp3s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 98:25:4a:79:6d:bc

[czw lut 13 09:09:52 2025] 8021q: 802.1Q VLAN Support v1.8

[czw lut 13 09:10:15 2025] wlp3s0: deauthenticating from 98:25:4a:79:6d:bc by local choice (Reason: 3=DEAUTH_LEAVING)

[czw lut 13 09:10:16 2025] wlp3s0: 80 MHz not supported, disabling VHT

[czw lut 13 09:10:16 2025] wlp3s0: authenticate with 98:25:4a:79:6d:bc (local address=80:a5:89:97:f2:85)

[czw lut 13 09:10:16 2025] wlp3s0: send auth to 98:25:4a:79:6d:bc (try 1/3)

[czw lut 13 09:10:16 2025] wlp3s0: authenticated

[czw lut 13 09:10:16 2025] wlp3s0: associate with 98:25:4a:79:6d:bc (try 1/3)

[czw lut 13 09:10:16 2025] wlp3s0: RX AssocResp from 98:25:4a:79:6d:bc (capab=0x1c11 status=0 aid=4)

[czw lut 13 09:10:16 2025] wlp3s0: associated

[czw lut 13 09:10:16 2025] ath: EEPROM regdomain: 0x8114

[czw lut 13 09:10:16 2025] ath: EEPROM indicates we should expect a country code

[czw lut 13 09:10:16 2025] ath: doing EEPROM country->regdmn map search

[czw lut 13 09:10:16 2025] ath: country maps to regdmn code: 0x37

[czw lut 13 09:10:16 2025] ath: Country alpha2 being used: DE

[czw lut 13 09:10:16 2025] ath: Regpair used: 0x37

[czw lut 13 09:10:16 2025] ath: regdomain 0x8114 dynamically updated by country element

[czw lut 13 09:10:17 2025] wlp3s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 98:25:4a:79:6d:bc

Zdarzyło się losowo raz czy dwa, że złapało adres i neta też by zaraz znów zerwać połączenie [siła 100% sygnału] i wyrzucić "Aktywacja poąłczenia nie powiodła się", wtedy wynik przez moment był taki:

Kod:
sudo dhcpcd wlp3s0                                                                            

dhcpcd already running on pid 5777 (/run/dhcpcd/wlp3s0.pid)

Kod:
sudo xed /etc/apparmor.d/sbin.dhclient

# vim:syntax=apparmor

#include <tunables/global>

/{,usr/}sbin/dhclient flags=(attach_disconnected) {

  #include <abstractions/base>

  #include <abstractions/nameservice>

  #include <abstractions/openssl>

  capability net_bind_service,

  capability net_raw,

  capability dac_override,

  capability net_admin,

  network packet,

  network raw,

  @{PROC}/[0-9]*/net/ r,

  @{PROC}/[0-9]*/net/** r,

  # dhclient wants to update its threads with functional names

  # https://gitlab.com/apparmor/apparmor/-/merge_requests/730

  # see LP: #1918410

  owner @{PROC}/@{pid}/task/[0-9]*/comm rw,

  /{,usr/}sbin/dhclient mr,

  # LP: #1197484 and LP: #1202203 - why is this needed? :(

  /{,usr/}bin/bash mr,

  /etc/dhclient.conf r,

  /etc/dhcp/ r,

  /etc/dhcp/** r,

  /var/lib/dhcp{,3}/dhclient* lrw,

  /{,var/}run/dhclient*.pid lrw,

  /{,var/}run/dhclient*.lease* lrw,

  # NetworkManager

  /{,var/}run/nm*conf r,

  /{,var/}run/sendsigs.omit.d/network-manager.dhclient*.pid lrw,

  /{,var/}run/NetworkManager/dhclient*.pid lrw,

  /var/lib/NetworkManager/dhclient*.conf lrw,

  /var/lib/NetworkManager/dhclient*.lease* lrw,

  signal (receive) peer=/usr/sbin/NetworkManager,

  ptrace (readby) peer=/usr/sbin/NetworkManager,

  # connman

  /{,var/}run/connman/dhclient*.pid lrw,

  /{,var/}run/connman/dhclient*.leases lrw,

  # synce-hal

  /usr/share/synce-hal/dhclient.conf r,

  # if there is a custom script, let it run unconfined

  /etc/dhcp/dhclient-script Uxr,

  # The dhclient-script shell script sources other shell scripts rather than

  # executing them, so we can't just use a separate profile for dhclient-script

  # with 'Uxr' on the hook scripts. However, for the long-running dhclient3

  # daemon to run arbitrary code via /sbin/dhclient-script, it would need to be

  # able to subvert dhclient-script or write to the hooks.d directories. As

  # such, if the dhclient3 daemon is subverted, this effectively limits it to

  # only being able to run the hooks scripts.

  /{,usr/}sbin/dhclient-script                           Uxr,

  # Since dhclient doesn't provide the option to disable hooks, which is

  # desireable in some cases, executing /bin/true as the script file suffices

  /{,usr/}bin/true                                       ixr,

  # Run the ELF executables under their own unrestricted profiles

  /usr/lib/NetworkManager/nm-dhcp-client.action   Pxrm,

  /usr/lib/connman/scripts/dhclient-script        Pxrm,

  # Support the new executable helper from NetworkManager.

  /usr/lib/NetworkManager/nm-dhcp-helper          Pxrm,

  signal (receive) peer=/usr/lib/NetworkManager/nm-dhcp-helper,

  # =========================================================================

  # Added GJB 2024-04-06 for network DHCP problem

  /usr/libexec/nm-dhcp-helper                     Pxrm,

  signal (receive) peer=/usr/libexec/nm-dhcp-helper,

  # =========================================================================

  # Site-specific additions and overrides. See local/README for details.

  #include <local/sbin.dhclient>

  # =========================================================================

  # Added GJB 2024-06-04 for network DHCP problem

  /etc/hostid                                    r,

  # =========================================================================

}

/usr/lib/NetworkManager/nm-dhcp-client.action {

  #include <abstractions/base>

  #include <abstractions/dbus>

  /usr/lib/NetworkManager/nm-dhcp-client.action mr,

  /var/lib/NetworkManager/*lease r,

  signal (receive) peer=/usr/sbin/NetworkManager,

  ptrace (readby) peer=/usr/sbin/NetworkManager,

  network inet dgram,

  network inet6 dgram,

}

/usr/lib/NetworkManager/nm-dhcp-helper {

  #include <abstractions/base>

  #include <abstractions/dbus>

  /usr/lib/NetworkManager/nm-dhcp-helper mr,

  /run/NetworkManager/private-dhcp rw,

  signal (send) peer=/sbin/dhclient,

  /var/lib/NetworkManager/*lease r,

  signal (receive) peer=/usr/sbin/NetworkManager,

  ptrace (readby) peer=/usr/sbin/NetworkManager,

  network inet dgram,

  network inet6 dgram,

}

# ========================================================================

# Added GJB 2024-06-04 for network DHCP problem 

/usr/libexec/nm-dhcp-helper {

  #include <abstractions/base>

  #include <abstractions/dbus>

  /usr/libexec/nm-dhcp-helper mr,

  /run/NetworkManager/private-dhcp rw,

  signal (send) peer=/sbin/dhclient,

  /var/lib/NetworkManager/*lease r,

  signal (receive) peer=/usr/sbin/NetworkManager,

  ptrace (readby) peer=/usr/sbin/NetworkManager,

  network inet dgram,

  network inet6 dgram,

}

# ==========================================================================

/usr/lib/connman/scripts/dhclient-script {

  #include <abstractions/base>

  #include <abstractions/dbus>

  /usr/lib/connman/scripts/dhclient-script      mr,

  network inet dgram,

  network inet6 dgram,

}

Kod:
sudo xed /etc/NetworkManager/NetworkManager.conf

[main]

plugins=ifupdown,keyfile

#dhcp=dhclient

[ifupdown]

managed=true

[device]

wifi.scan-rand-mac-address=no

***mati75*** · 13-02-2025, 14:54

0

Mam inny pomysł tak teraz patrząc o tym co tu piszemy.

Kod:
nm-connection-editor

edytuj sieć od repeatera, na zakładce Ustawienia IPv6, na poziomie Metoda ustaw wyłączone. Spróbuj się połączyć do niej jeszcze raz.

Xan666 · (Ten post był ostatnio modyfikowany: 13-02-2025, 16:14 przez Xan666.)

0

Zrobiłem dużo więcej i nadal kupa. Oto co zrobiłem:

Kod:
lspci 

03:00.0 Network controller: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter (rev 01)

Kod:
nmcli radio wifi on

Kod:
sudo sed -i 's/wifi.powersave = 3/wifi.powersave = 2/' /etc/NetworkManager/conf.d/default-wifi-powersave-on.conf

Kod:
cat /etc/NetworkManager/conf.d/default-wifi-powersave-on.conf

[connection]

wifi.powersave = 2

Kod:
modinfo ath9k_htc | grep firmware

firmware:       ath9k_htc/htc_9271-1.4.0.fw

firmware:       ath9k_htc/htc_7010-1.4.0.fw

Kod:
iwlist scan | egrep -i 'ssid|cipher'

lo        Interface doesn't support scanning.

enp2s0    Interface doesn't support scanning.

                    ESSID:"Graveyard 2.4 GHz"

                        Group Cipher : CCMP

                        Pairwise Ciphers (1) : CCMP

                    ESSID:"Graveyard 2.4 GHz_EXT"

                        Group Cipher : CCMP

                        Pairwise Ciphers (1) : CCMP

Kod:
sudo apt install firmware-ath9k-htc && sudo apt update && sudo apt upgrade -y

I nic. Ustawiłem na Repeaterze stały adres IP: 192.168.0.95 zakres adresów na DHCP od 192.168.0.100 - 199.
Ustawiłem ręcznie na połączeniu X_EXT stały adres IP: 192.168.0.195 i bramę 192.168.0.95 i nic, nie mogę pingować, strony się nie ładują.

Dodatkowo logi załączam tutaj: https://pastebin.com/5BSHgEP1
Dziwne, prawda? Na LMDE wystarczyło dać https://forum.linuxmint.pl/showthread.php?tid=2800 tak jak pisałem tu i było po sprawie. Na LM 22.1 - jak widać - nie bardzo to działa.

***mati75*** · 13-02-2025, 16:44

0

Metodę zmień na statyczną z dhcp przy stałym adresie i jeszcze pokaż:

Kod:
sudo ip route show

Xan666 · 13-02-2025, 17:19

0

Kill me!

Kod:
sudo ip route show                                                                                    

default via 192.168.0.95 dev wlp3s0 proto static metric 20600 

192.168.0.0/24 dev wlp3s0 proto kernel scope link src 192.168.0.195 metric 600

Kod:
ping o2.pl                                                                                            ping: o2.pl: Ta nazwa lub usługa jest nieznana

***mati75*** · 13-02-2025, 21:49

0

Kod:
ls -lah /etc/resolv.conf

Xan666 · (Ten post był ostatnio modyfikowany: 13-02-2025, 22:58 przez Xan666.)

0

(13-02-2025, 21:49)mati75 napisał(a):
Kod:
ls -lah /etc/resolv.conf

Kod:
lrwxrwxrwx 1 root root 39 paź 23 13:34 /etc/resolv.conf -> ../run/systemd/resolve/stub=resolv.conf

Dodano po pewnym czasie:
Poddajemy się? Stara durna karta nas pokonała? Winsyf zatruimfował? hahaha Wink

łeb mi odpada już.

***mati75*** · 13-02-2025, 23:04

0

Kod:
ping -c3 8.8.8.8

sudo systemd-resolve --interface wlp3s0 --set-dns 1.1.1.1

ping -c3 wp.pl

Zaloguj się
Login:
Hasło:	Nie pamiętam hasła
	Zapamiętaj mnie