Zaloguj się

yahoob3 · (Ten post był ostatnio modyfikowany: 28-03-2021, 17:37 przez yahoob3.)

Witam

Reinstalowałem właśnie Linux Mint - mam fizycznie odrębny dysk pod ten system. Wszystko poszło dobrze, z tym, że w bootmenu widzę że grub zainstalował się na dysku z windowsem. Został też stary grub po poprzednim linuxie (na właściwym dysku), który nie uruchamia automatycznie systemu. Da się jakoś wywalić tego nowego gruba i skonfigurować starego aby odpalał nowy system?

Konfigurowałem sobie komputer tak, aby domyślnie startował z dysku z windowsem, a gdy chciałem uruchomić linuxa to odpalałem bootmenu i startowałem z innego dysku. I tak się dzieje w dalszym ciągu, a domyślnie uruchamia się bootloader windowsa.

***dedito*** · (Ten post był ostatnio modyfikowany: 21-03-2021, 12:29 przez dedito.)

0

Podaj wynik skryptu https://github.com/arvidjaar/bootinfoscript
Alternatywnie to samo, ale z repozytorii: https://help.ubuntu.com/community/Boot-Info
Alternatywnie to samo, ale z repozytorii:
instalacja:

Kod:
sudo apt install boot-info-script

uruchomienie:

Kod:
sudo bootinfoscript

21-03-2021, 12:34

0

Kod:
                 Boot Info Script 0.78      [09 October 2019]

============================= Boot Info Summary: ===============================

 => Grub2 (v1.99-2.00) is installed in the MBR of /dev/sda and looks at sector 

    55825008 of the same hard drive for core.img, but core.img can not be 

    found at this location.

 => No boot loader is installed in the MBR of /dev/sdc.

 => No boot loader is installed in the MBR of /dev/sdd.

 => libparted MBR boot code is installed in the MBR of /dev/sde.

sda1: __________________________________________________________________________

    File system:       vfat

    Boot sector type:  FAT32

    Boot sector info:  No errors found in the Boot Parameter Block.

    Operating System:  

    Boot files:        /efi/BOOT/fbx64.efi /efi/BOOT/mmx64.efi 

                       /efi/ubuntu/grubx64.efi /efi/ubuntu/mmx64.efi 

                       /efi/ubuntu/shimx64.efi /efi/ubuntu/grub.cfg

sda2: __________________________________________________________________________

    File system:       ext4

    Boot sector type:  -

    Boot sector info: 

    Operating System:  Linux Mint 20.1

    Boot files:        /boot/grub/grub.cfg /etc/fstab

sdc1: __________________________________________________________________________

    File system:       ntfs

    Boot sector type:  Unknown

    Boot sector info:  According to the info in the boot sector, sdc1 has 

                       1565562879 sectors, but according to the info from 

                       fdisk, it has 5860530175 sectors.

    Operating System:  

    Boot files:        

sdd1: __________________________________________________________________________

    File system:       ntfs

    Boot sector type:  Unknown

    Boot sector info:  No errors found in the Boot Parameter Block.

    Operating System:  

    Boot files:        

sde1: __________________________________________________________________________

    File system:       ntfs

    Boot sector type:  Windows 8/2012: NTFS

    Boot sector info:  No errors found in the Boot Parameter Block.

    Operating System:  

    Boot files:        

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Dysk /dev/sda: 111,81 GiB, bajtów: 120034123776, sektorów: 234441648

Disk model: KINGSTON SV300S3

Jednostki: sektorów, czyli 1 * 512 = 512 bajtów

Rozmiar sektora (logiczny/fizyczny) w bajtach: 512 / 512

Rozmiar we/wy (minimalny/optymalny) w bajtach: 512 / 512

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1                   1   234,441,647   234,441,647  ee GPT

GUID Partition Table detected.

Partition  Attrs   Start Sector    End Sector  # of Sectors System

/dev/sda1                 2,048       585,727       583,680 EFI System partition

/dev/sda2               585,728   234,441,196   233,855,469 Data partition (Linux)

Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set

Drive: sdc _____________________________________________________________________

Dysk /dev/sdc: 2,75 TiB, bajtów: 3000592982016, sektorów: 5860533168

Disk model: TOSHIBA HDWD130 

Jednostki: sektorów, czyli 1 * 512 = 512 bajtów

Rozmiar sektora (logiczny/fizyczny) w bajtach: 512 / 4096

Rozmiar we/wy (minimalny/optymalny) w bajtach: 4096 / 4096

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdc1                   1 4,294,967,295 4,294,967,295  ee GPT

GUID Partition Table detected.

Partition  Attrs   Start Sector    End Sector  # of Sectors System

/dev/sdc1                 2,048 5,860,532,223 5,860,530,176 Data partition (Windows/Linux)

Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set

Drive: sdd _____________________________________________________________________

Dysk /dev/sdd: 465,78 GiB, bajtów: 500107862016, sektorów: 976773168

Disk model: WDC WD5000AADS-0

Jednostki: sektorów, czyli 1 * 512 = 512 bajtów

Rozmiar sektora (logiczny/fizyczny) w bajtach: 512 / 512

Rozmiar we/wy (minimalny/optymalny) w bajtach: 512 / 512

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdd1                   1   976,773,167   976,773,167  ee GPT

GUID Partition Table detected.

Partition  Attrs   Start Sector    End Sector  # of Sectors System

/dev/sdd1                 2,048   976,773,119   976,771,072 Data partition (Windows/Linux)

Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set

Drive: sde _____________________________________________________________________

Dysk /dev/sde: 931,53 GiB, bajtów: 1000204886016, sektorów: 1953525168

Disk model: WDC WD10EZEX-00K

Jednostki: sektorów, czyli 1 * 512 = 512 bajtów

Rozmiar sektora (logiczny/fizyczny) w bajtach: 512 / 4096

Rozmiar we/wy (minimalny/optymalny) w bajtach: 4096 / 4096

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sde1                  63 1,953,520,064 1,953,520,002   7 NTFS / exFAT / HPFS

"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/nvme0n1p1   42DC7605DC75F40F                       ntfs       Odzyskiwanie

/dev/nvme0n1p2   8279-5FDF                              vfat       

/dev/nvme0n1p3                                                     

/dev/nvme0n1p4   2AAE87CCAE878F4F                       ntfs       

/dev/sda1        3865-4CB1                              vfat       

/dev/sda2        9eb25d20-7327-45b0-b6f1-3fe654f0da37   ext4       

/dev/sdc1        6217F8AB323138C2                       ntfs       

/dev/sdd1        63412C6215F10A67                       ntfs       Green

/dev/sde1        3EECEC77ECEC2B3B                       ntfs       

========================= "ls -l /dev/disk/by-id" output: ======================

razem 0

lrwxrwxrwx 1 root root  9 mar 21 11:05 ata-HL-DT-ST_DVDRAM_GH24NSB0_KEYD9DC0613 -> ../../sr0

lrwxrwxrwx 1 root root  9 mar 21 11:05 ata-KINGSTON_SV300S37A120G_50026B723801AB37 -> ../../sda

lrwxrwxrwx 1 root root 10 mar 21 11:05 ata-KINGSTON_SV300S37A120G_50026B723801AB37-part1 -> ../../sda1

lrwxrwxrwx 1 root root 10 mar 21 11:05 ata-KINGSTON_SV300S37A120G_50026B723801AB37-part2 -> ../../sda2

lrwxrwxrwx 1 root root  9 mar 21 11:05 ata-TOSHIBA_HDWD130_78UXHZWAS -> ../../sdc

lrwxrwxrwx 1 root root 10 mar 21 11:05 ata-TOSHIBA_HDWD130_78UXHZWAS-part1 -> ../../sdc1

lrwxrwxrwx 1 root root  9 mar 21 11:05 ata-WDC_WD10EZEX-00KUWA0_WD-WCC1S6206927 -> ../../sde

lrwxrwxrwx 1 root root 10 mar 21 11:05 ata-WDC_WD10EZEX-00KUWA0_WD-WCC1S6206927-part1 -> ../../sde1

lrwxrwxrwx 1 root root  9 mar 21 11:05 ata-WDC_WD5000AADS-00M2B0_WD-WCAV54077014 -> ../../sdd

lrwxrwxrwx 1 root root 10 mar 21 11:05 ata-WDC_WD5000AADS-00M2B0_WD-WCAV54077014-part1 -> ../../sdd1

lrwxrwxrwx 1 root root 13 mar 21 11:05 nvme-eui.0026b76838c779d5 -> ../../nvme0n1

lrwxrwxrwx 1 root root 15 mar 21 11:05 nvme-eui.0026b76838c779d5-part1 -> ../../nvme0n1p1

lrwxrwxrwx 1 root root 15 mar 21 11:05 nvme-eui.0026b76838c779d5-part2 -> ../../nvme0n1p2

lrwxrwxrwx 1 root root 15 mar 21 11:05 nvme-eui.0026b76838c779d5-part3 -> ../../nvme0n1p3

lrwxrwxrwx 1 root root 15 mar 21 11:05 nvme-eui.0026b76838c779d5-part4 -> ../../nvme0n1p4

lrwxrwxrwx 1 root root 13 mar 21 11:05 nvme-KINGSTON_SA2000M8500G_50026B76838C779D -> ../../nvme0n1

lrwxrwxrwx 1 root root 15 mar 21 11:05 nvme-KINGSTON_SA2000M8500G_50026B76838C779D-part1 -> ../../nvme0n1p1

lrwxrwxrwx 1 root root 15 mar 21 11:05 nvme-KINGSTON_SA2000M8500G_50026B76838C779D-part2 -> ../../nvme0n1p2

lrwxrwxrwx 1 root root 15 mar 21 11:05 nvme-KINGSTON_SA2000M8500G_50026B76838C779D-part3 -> ../../nvme0n1p3

lrwxrwxrwx 1 root root 15 mar 21 11:05 nvme-KINGSTON_SA2000M8500G_50026B76838C779D-part4 -> ../../nvme0n1p4

lrwxrwxrwx 1 root root  9 mar 21 11:05 usb-Phison_2309_PRAM-0:0 -> ../../sdb

lrwxrwxrwx 1 root root  9 mar 21 11:05 wwn-0x5000039fe6e92572 -> ../../sdc

lrwxrwxrwx 1 root root 10 mar 21 11:05 wwn-0x5000039fe6e92572-part1 -> ../../sdc1

lrwxrwxrwx 1 root root  9 mar 21 11:05 wwn-0x5001480000000000 -> ../../sr0

lrwxrwxrwx 1 root root  9 mar 21 11:05 wwn-0x50014ee2039cbf5a -> ../../sdd

lrwxrwxrwx 1 root root 10 mar 21 11:05 wwn-0x50014ee2039cbf5a-part1 -> ../../sdd1

lrwxrwxrwx 1 root root  9 mar 21 11:05 wwn-0x50014ee209169ede -> ../../sde

lrwxrwxrwx 1 root root 10 mar 21 11:05 wwn-0x50014ee209169ede-part1 -> ../../sde1

lrwxrwxrwx 1 root root  9 mar 21 11:05 wwn-0x50026b723801ab37 -> ../../sda

lrwxrwxrwx 1 root root 10 mar 21 11:05 wwn-0x50026b723801ab37-part1 -> ../../sda1

lrwxrwxrwx 1 root root 10 mar 21 11:05 wwn-0x50026b723801ab37-part2 -> ../../sda2

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/nvme0n1p2   /boot/efi                vfat       (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)

/dev/sda2        /                        ext4       (rw,relatime,errors=remount-ro)

/dev/sdd1        /media/darek/Green       fuseblk    (rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096,uhelper=udisks2)

========================== sda1/efi/ubuntu/grub.cfg: ===========================

--------------------------------------------------------------------------------

search.fs_uuid 873320a0-65f9-45a8-ba31-a239674c0a49 root hd0,gpt2 

set prefix=($root)'/boot/grub'

configfile $prefix/grub.cfg

--------------------------------------------------------------------------------

=========================== sda2/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------

#

# DO NOT EDIT THIS FILE

#

# It is automatically generated by grub-mkconfig using templates

# from /etc/grub.d and settings from /etc/default/grub

#

### BEGIN /etc/grub.d/00_header ###

if [ -s $prefix/grubenv ]; then

  set have_grubenv=true

  load_env

fi

if [ "${initrdfail}" = 2 ]; then

   set initrdfail=

elif [ "${initrdfail}" = 1 ]; then

   set next_entry="${prev_entry}"

   set prev_entry=

   save_env prev_entry

   if [ "${next_entry}" ]; then

      set initrdfail=2

   fi

fi

if [ "${next_entry}" ] ; then

   set default="${next_entry}"

   set next_entry=

   save_env next_entry

   set boot_once=true

else

   set default="0"

fi

if [ x"${feature_menuentry_id}" = xy ]; then

  menuentry_id_option="--id"

else

  menuentry_id_option=""

fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then

  set saved_entry="${prev_saved_entry}"

  save_env saved_entry

  set prev_saved_entry=

  save_env prev_saved_entry

  set boot_once=true

fi

function savedefault {

  if [ -z "${boot_once}" ]; then

    saved_entry="${chosen}"

    save_env saved_entry

  fi

}

function initrdfail {

    if [ -n "${have_grubenv}" ]; then if [ -n "${partuuid}" ]; then

      if [ -z "${initrdfail}" ]; then

        set initrdfail=1

        if [ -n "${boot_once}" ]; then

          set prev_entry="${default}"

          save_env prev_entry

        fi

      fi

      save_env initrdfail

    fi; fi

}

function recordfail {

  set recordfail=1

  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi

}

function load_video {

  if [ x$feature_all_video_module = xy ]; then

    insmod all_video

  else

    insmod efi_gop

    insmod efi_uga

    insmod ieee1275_fb

    insmod vbe

    insmod vga

    insmod video_bochs

    insmod video_cirrus

  fi

}

if [ x$feature_default_font_path = xy ] ; then

   font=unicode

else

insmod part_gpt

insmod ext2

set root='hd0,gpt2'

if [ x$feature_platform_search_hint = xy ]; then

  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  9eb25d20-7327-45b0-b6f1-3fe654f0da37

else

  search --no-floppy --fs-uuid --set=root 9eb25d20-7327-45b0-b6f1-3fe654f0da37

fi

    font="/usr/share/grub/unicode.pf2"

fi

if loadfont $font ; then

  set gfxmode=auto

  load_video

  insmod gfxterm

  set locale_dir=$prefix/locale

  set lang=pl_PL

  insmod gettext

fi

terminal_output gfxterm

if [ "${recordfail}" = 1 ] ; then

  set timeout=30

else

  if [ x$feature_timeout_style = xy ] ; then

    set timeout_style=hidden

    set timeout=10

  # Fallback hidden-timeout code in case the timeout_style feature is

  # unavailable.

  elif sleep --interruptible 10 ; then

    set timeout=0

  fi

fi

### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###

set menu_color_normal=white/black

set menu_color_highlight=black/light-gray

### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###

function gfxmode {

    set gfxpayload="${1}"

    if [ "${1}" = "keep" ]; then

        set vt_handoff=vt.handoff=7

    else

        set vt_handoff=

    fi

}

if [ "${recordfail}" != 1 ]; then

  if [ -e ${prefix}/gfxblacklist.txt ]; then

    if hwmatch ${prefix}/gfxblacklist.txt 3; then

      if [ ${match} = 0 ]; then

        set linux_gfx_mode=keep

      else

        set linux_gfx_mode=text

      fi

    else

      set linux_gfx_mode=text

    fi

  else

    set linux_gfx_mode=keep

  fi

else

  set linux_gfx_mode=text

fi

export linux_gfx_mode

menuentry 'Linux Mint 20.1 Cinnamon' --class linuxmint --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-9eb25d20-7327-45b0-b6f1-3fe654f0da37' {

    recordfail

    load_video

    gfxmode $linux_gfx_mode

    insmod gzio

    if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi

    insmod part_gpt

    insmod ext2

    set root='hd0,gpt2'

    if [ x$feature_platform_search_hint = xy ]; then

      search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  9eb25d20-7327-45b0-b6f1-3fe654f0da37

    else

      search --no-floppy --fs-uuid --set=root 9eb25d20-7327-45b0-b6f1-3fe654f0da37

    fi

    linux    /boot/vmlinuz-5.4.0-58-generic root=UUID=9eb25d20-7327-45b0-b6f1-3fe654f0da37 ro  quiet splash 

    initrd    /boot/initrd.img-5.4.0-58-generic

}

submenu 'Opcje zaawansowane dla systemu Linux Mint 20.1 Cinnamon' $menuentry_id_option 'gnulinux-advanced-9eb25d20-7327-45b0-b6f1-3fe654f0da37' {

    menuentry 'Linux Mint 20.1 Cinnamon, za pomocą systemu Linux 5.4.0-58-generic' --class linuxmint --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.4.0-58-generic-advanced-9eb25d20-7327-45b0-b6f1-3fe654f0da37' {

        recordfail

        load_video

        gfxmode $linux_gfx_mode

        insmod gzio

        if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi

        insmod part_gpt

        insmod ext2

        set root='hd0,gpt2'

        if [ x$feature_platform_search_hint = xy ]; then

          search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  9eb25d20-7327-45b0-b6f1-3fe654f0da37

        else

          search --no-floppy --fs-uuid --set=root 9eb25d20-7327-45b0-b6f1-3fe654f0da37

        fi

        echo    'Wczytywanie systemu Linux 5.4.0-58-generic...'

        linux    /boot/vmlinuz-5.4.0-58-generic root=UUID=9eb25d20-7327-45b0-b6f1-3fe654f0da37 ro  quiet splash 

        echo    'Wczytywanie początkowego dysku RAM...'

        initrd    /boot/initrd.img-5.4.0-58-generic

    }

    menuentry 'Linux Mint 20.1 Cinnamon, with Linux 5.4.0-58-generic (recovery mode)' --class linuxmint --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.4.0-58-generic-recovery-9eb25d20-7327-45b0-b6f1-3fe654f0da37' {

        recordfail

        load_video

        insmod gzio

        if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi

        insmod part_gpt

        insmod ext2

        set root='hd0,gpt2'

        if [ x$feature_platform_search_hint = xy ]; then

          search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  9eb25d20-7327-45b0-b6f1-3fe654f0da37

        else

          search --no-floppy --fs-uuid --set=root 9eb25d20-7327-45b0-b6f1-3fe654f0da37

        fi

        echo    'Wczytywanie systemu Linux 5.4.0-58-generic...'

        linux    /boot/vmlinuz-5.4.0-58-generic root=UUID=9eb25d20-7327-45b0-b6f1-3fe654f0da37 ro recovery nomodeset dis_ucode_ldr 

        echo    'Wczytywanie początkowego dysku RAM...'

        initrd    /boot/initrd.img-5.4.0-58-generic

    }

}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/10_linux_zfs ###

### END /etc/grub.d/10_linux_zfs ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/30_os-prober ###

menuentry 'Windows Boot Manager (na /dev/nvme0n1p2)' --class windows --class os $menuentry_id_option 'osprober-efi-8279-5FDF' {

    insmod part_gpt

    insmod fat

    if [ x$feature_platform_search_hint = xy ]; then

      search --no-floppy --fs-uuid --set=root  8279-5FDF

    else

      search --no-floppy --fs-uuid --set=root 8279-5FDF

    fi

    chainloader /EFI/Microsoft/Boot/bootmgfw.efi

}

set timeout_style=menu

if [ "${timeout}" = 0 ]; then

  set timeout=10

fi

### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###

menuentry 'UEFI Firmware Settings' $menuentry_id_option 'uefi-firmware' {

    fwsetup

}

### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###

# This file provides an easy way to add custom menu entries.  Simply type the

# menu entries you want to add after this comment.  Be careful not to change

# the 'exec tail' line above.

### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###

if [ -f  ${config_directory}/custom.cfg ]; then

  source ${config_directory}/custom.cfg

elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then

  source $prefix/custom.cfg;

fi

### END /etc/grub.d/41_custom ###

--------------------------------------------------------------------------------

=============================== sda2/etc/fstab: ================================

--------------------------------------------------------------------------------

# /etc/fstab: static file system information.

#

# Use 'blkid' to print the universally unique identifier for a

# device; this may be used with UUID= as a more robust way to name devices

# that works even if disks are added and removed. See fstab(5).

#

# <file system> <mount point>   <type>  <options>       <dump>  <pass>

# / was on /dev/sda2 during installation

UUID=9eb25d20-7327-45b0-b6f1-3fe654f0da37 /               ext4    errors=remount-ro 0       1

# /boot/efi was on /dev/nvme0n1p2 during installation

UUID=8279-5FDF  /boot/efi       vfat    umask=0077      0       1

/swapfile                                 none            swap    sw              0       0

--------------------------------------------------------------------------------

=================== sda2: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

  78.453357697 = 84.238651392   boot/grub/grub.cfg                             1

  74.907363892 = 80.431169536   boot/vmlinuz                                   2

  74.907363892 = 80.431169536   boot/vmlinuz-5.4.0-58-generic                  2

  75.609809875 = 81.185415168   boot/initrd.img                                2

  75.609809875 = 81.185415168   boot/initrd.img-5.4.0-58-generic               2

  75.609809875 = 81.185415168   boot/initrd.img.old                            2

======================== Unknown MBRs/Boot Sectors/etc: ========================

Unknown BootLoader on sdc1

00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|

00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 08 00 00  |........?.......|

00000020  00 00 00 00 80 00 80 00  ff 97 50 5d 01 00 00 00  |..........P]....|

00000030  04 00 00 00 00 00 00 00  7f 09 d5 15 00 00 00 00  |................|

00000040  f6 00 00 00 01 00 00 00  c2 38 31 32 ab f8 17 62  |.........812...b|

00000050  00 00 00 00 0e 1f be 71  7c ac 22 c0 74 0b 56 b4  |.......q|.".t.V.|

00000060  0e bb 07 00 cd 10 5e eb  f0 32 e4 cd 16 cd 19 eb  |......^..2......|

00000070  fe 54 68 69 73 20 69 73  20 6e 6f 74 20 61 20 62  |.This is not a b|

00000080  6f 6f 74 61 62 6c 65 20  64 69 73 6b 2e 20 50 6c  |ootable disk. Pl|

00000090  65 61 73 65 20 69 6e 73  65 72 74 20 61 20 62 6f  |ease insert a bo|

000000a0  6f 74 61 62 6c 65 20 66  6c 6f 70 70 79 20 61 6e  |otable floppy an|

000000b0  64 0d 0a 70 72 65 73 73  20 61 6e 79 20 6b 65 79  |d..press any key|

000000c0  20 74 6f 20 74 72 79 20  61 67 61 69 6e 20 2e 2e  | to try again ..|

000000d0  2e 20 0d 0a 00 00 00 00  00 00 00 00 00 00 00 00  |. ..............|

000000e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|

*

000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|

00000200

Unknown BootLoader on sdd1

00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|

00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 08 00 00  |........?.......|

00000020  00 00 00 00 80 00 80 00  ff 57 38 3a 00 00 00 00  |.........W8:....|

00000030  04 00 00 00 00 00 00 00  7f 85 a3 03 00 00 00 00  |................|

00000040  f6 00 00 00 01 00 00 00  67 0a f1 15 62 2c 41 63  |........g...b,Ac|

00000050  00 00 00 00 0e 1f be 71  7c ac 22 c0 74 0b 56 b4  |.......q|.".t.V.|

00000060  0e bb 07 00 cd 10 5e eb  f0 32 e4 cd 16 cd 19 eb  |......^..2......|

00000070  fe 54 68 69 73 20 69 73  20 6e 6f 74 20 61 20 62  |.This is not a b|

00000080  6f 6f 74 61 62 6c 65 20  64 69 73 6b 2e 20 50 6c  |ootable disk. Pl|

00000090  65 61 73 65 20 69 6e 73  65 72 74 20 61 20 62 6f  |ease insert a bo|

000000a0  6f 74 61 62 6c 65 20 66  6c 6f 70 70 79 20 61 6e  |otable floppy an|

000000b0  64 0d 0a 70 72 65 73 73  20 61 6e 79 20 6b 65 79  |d..press any key|

000000c0  20 74 6f 20 74 72 79 20  61 67 61 69 6e 20 2e 2e  | to try again ..|

000000d0  2e 20 0d 0a 00 00 00 00  00 00 00 00 00 00 00 00  |. ..............|

000000e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|

*

000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|

00000200

========= Devices which don't seem to have a corresponding hard drive: =========

sdb 

=============================== StdErr Messages: ===============================

  /dev/sdb: open failed: Brak medium

  /dev/sdb: open failed: Brak medium

***dedito*** · 21-03-2021, 13:00

0

Opisz szerzej swoją konfigurację, bo ze skryptu wynika, że masz 5 fizycznych dysków.
1

Kod:
Drive: sda _____________________________________________________________________

Dysk /dev/sda: 111,81 GiB, bajtów: 120034123776, sektorów: 234441648

Disk model: KINGSTON SV300S3

2

Kod:
Drive: sdc _____________________________________________________________________

Dysk /dev/sdc: 2,75 TiB, bajtów: 3000592982016, sektorów: 5860533168

Disk model: TOSHIBA HDWD130

3

Kod:
Drive: sdd _____________________________________________________________________

Dysk /dev/sdd: 465,78 GiB, bajtów: 500107862016, sektorów: 976773168

Disk model: WDC WD5000AADS-0

4

Kod:
Drive: sde _____________________________________________________________________

Dysk /dev/sde: 931,53 GiB, bajtów: 1000204886016, sektorów: 1953525168

Disk model: WDC WD10EZEX-00K

5

Kod:
Device          UUID                                  TYPE      LABEL

/dev/nvme0n1p1  42DC7605DC75F40F                      ntfs      Odzyskiwanie

/dev/nvme0n1p2  8279-5FDF                              vfat      

/dev/nvme0n1p3                                                    

/dev/nvme0n1p4  2AAE87CCAE878F4F                      ntfs

21-03-2021, 13:10

0

Zgadza się, mam 5 dysków, dysk kingston 500 GB na nvme jest dyskiem pod windows, dysk kingston 120 gb jest dyskiem na linuxa. Do tego są 3 dysku z danymi i napęd optyczny, ale tych nie bierzmy pod uwagę.

***dedito*** · (Ten post był ostatnio modyfikowany: 21-03-2021, 13:48 przez dedito.)

0

Spróbowałbym zmiany punktu montowania /boot/efi z /dev/nvme0n1p2 na /dev/sda1 i potem jeszcze grub-install

21-03-2021, 14:01

0

A jak to zrobić? I jak pozbyć się tego gruba na nvme?

***dedito*** · (Ten post był ostatnio modyfikowany: 21-03-2021, 14:52 przez dedito.)

0

Edytuj /etc/fstab
Co do usuwania wpisów wskazówki są tu: https://askubuntu.com/questions/63610/ho...-menu-uefi

21-03-2021, 14:46

0

To mi usunie gruba z nvme?

***dedito*** · 21-03-2021, 14:53

0

Nie pisałem, że to ma usunąć gruba.
Najpierw przełącz sobie partycję /boot/efi

Zaloguj się
Login:
Hasło:	Nie pamiętam hasła
	Zapamiętaj mnie