Liczba postów: 12
Liczba wątków: 2
Dołączył: Oct 2019
Reputacja:
System: 19.2 Tina
Środowisko graficzne: GNOME
Architektura CPU: 64bit
Miernik podziękowań 0%
07-10-2019, 06:15
(Ten post był ostatnio modyfikowany: 07-10-2019, 06:19 przez xrm.)
0 Witam, mam nietypowy problem. Otóż próbuję zainstalować Minta 19.2 i niestety nie chce mi się łączyć z siecią WiFi z telefonu. Łączy się z innymi sieciami WiFi, ale konkretnie z tą (z której chcę korzystać na wyjazdach) nie. Pyta o hasło, wpisuje je, następnie komunikat, że nie może się połączyć i znów pyta o hasło. Zmieniałam nazwę sieci i hasło, ale ciągle to samo. Próbowałam z wersją Live i zainstalowaną na pendrivie na innym kompie, ale rezultat ten sam... Dodam jeszcze, że W10 łączy się z nią bez problemu, podobnie jak wszystkie inne moje sprzęty.
Liczba postów: 2 530
Liczba wątków: 24
Dołączył: Jan 2019
Reputacja:
System: 21.3 Virginia
Środowisko graficzne: Cinnamon
Architektura CPU: 64bit
Miernik podziękowań 24%
0 Sprawdź, jaki masz interface WiFi poleceniem ifconfig, a potem wrzuć na forum wynik polecenia:
Kod: sudo iwlist XXXX scan
gdzie XXXX to będzie nazwa Twojego interfejsu , np. wlan0, albo wlp3s0. Coś nie tak chyba ustawione w telefonie... a może się mylę
Liczba postów: 12
Liczba wątków: 2
Dołączył: Oct 2019
Reputacja:
System: 19.2 Tina
Środowisko graficzne: GNOME
Architektura CPU: 64bit
Miernik podziękowań 0%
0 Teraz nie mogę tego sprawdzić, ale dam przykład. Na tym samym penie sprawdzałam na SyncMasterze TC240 (takie all in one stare, którego używam jako monitora) i bez problemu łączy się z tą siecią, podobnie jak reszta moich telefonów, tablet i oba laptopy... Także ustawienia w telefonie raczej nie są złe
Liczba postów: 2 530
Liczba wątków: 24
Dołączył: Jan 2019
Reputacja:
System: 21.3 Virginia
Środowisko graficzne: Cinnamon
Architektura CPU: 64bit
Miernik podziękowań 24%
Liczba postów: 12
Liczba wątków: 2
Dołączył: Oct 2019
Reputacja:
System: 19.2 Tina
Środowisko graficzne: GNOME
Architektura CPU: 64bit
Miernik podziękowań 0%
0 Obawiam się, że to się nie uda. Nie mam połączenia z netem przecież. A jak połączę się do innej to skrypt pokaże coś innego.
Liczba postów: 82
Liczba wątków: 0
Dołączył: Feb 2019
Reputacja:
System: Inny
Środowisko graficzne: KDE
Inny System: OpenSUSE
Miernik podziękowań 1%
0 To wykonaj skrypt podczas próby połączenia z tą siecią z którą się nie łączy, zapisz wynik, potem połącz się z siecią z której obecnie piszesz na forum i wklej plik wynikowy.
Liczba postów: 2 530
Liczba wątków: 24
Dołączył: Jan 2019
Reputacja:
System: 21.3 Virginia
Środowisko graficzne: Cinnamon
Architektura CPU: 64bit
Miernik podziękowań 24%
0 Wynik tego skryptu (w wersji offline - też można go wykonać - patrz linkowany tutek), daje dość obszerne informacje. Pozostałe informacje też mogą być pomocne.
Na razie nie dzielmy skóry na niedźwiedziu
Liczba postów: 12
Liczba wątków: 2
Dołączył: Oct 2019
Reputacja:
System: 19.2 Tina
Środowisko graficzne: GNOME
Architektura CPU: 64bit
Miernik podziękowań 0%
07-10-2019, 14:52
(Ten post był ostatnio modyfikowany: 07-10-2019, 17:44 przez dedito.
Powód edycji: logi
)
0 Wiec tak (nie mam polskich liter, przepraszam). Tu wyniki ifconfig https://pastebin.com/0UppkpmW
Kod: eno1: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 00:12:96:04:76:32 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 20 memory 0xf7e00000-f7e20000
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 558 bytes 40869 (40.8 KB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 558 bytes 40869 (40.8 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlp2s0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether a4:4e:31:9c:ae:0c txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
A tutaj wyniki dzialania skryptu: https://pastebin.com/CxiBwge9 (sieci jest wiecej, ale zawieraja dane umozliwiajace dokladna lokalizacje, wiec je wywalilam).
Kod: ########## wireless info START ##########
Report from: 07 Oct 2019 14:41 UTC +0000
Booted last: 07 Oct 2019 00:00 UTC +0000
Script from: 22 Oct 2018 03:34 UTC +0000
##### release ###########################
Distributor ID: LinuxMint
Description: Linux Mint 19.2 Tina
Release: 19.2
Codename: tina
##### kernel ############################
Linux 4.15.0-54-generic #58-Ubuntu SMP Mon Jun 24 10:55:24 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux
Parameters: file=/cdrom/preseed/linuxmint.seed, boot=casper, initrd=/casper/initrd.lz, quiet, splash, --
##### desktop ###########################
Cinnamon
##### lspci #############################
00:19.0 Ethernet controller [0200]: Intel Corporation 82579LM Gigabit Network Connection (Lewisville) [8086:1502] (rev 04)
Subsystem: Dell 82579LM Gigabit Network Connection (Lewisville) [1028:0533]
Kernel driver in use: e1000e
02:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6205 [Taylor Peak] [8086:0082] (rev 34)
Subsystem: Intel Corporation Centrino Advanced-N 6205 AGN [8086:1321]
Kernel driver in use: iwlwifi
##### lsusb #############################
Bus 002 Device 003: ID 0a5c:5800 Broadcom Corp. BCM5880 Secure Applications Processor
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 0c45:643f Microdia Dell Integrated HD Webcam
Bus 001 Device 003: ID 1bcf:0005 Sunplus Innovation Technology Inc. Optical Mouse
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 002: ID 13fe:6300 Kingston Technology Company Inc.
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
##### PCMCIA card info ##################
##### rfkill ############################
1: dell-wifi: Wireless LAN
Soft blocked: no
Hard blocked: no
2: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
##### secure boot #######################
EFI variables are not supported on this system
##### lsmod #############################
iwldvm 229376 0
mac80211 778240 1 iwldvm
dell_laptop 20480 0
iwlwifi 286720 1 iwldvm
dell_wmi 16384 0
dell_smbios 24576 2 dell_wmi,dell_laptop
dell_wmi_descriptor 16384 2 dell_wmi,dell_smbios
cfg80211 622592 3 iwldvm,iwlwifi,mac80211
wmi_bmof 16384 0
sparse_keymap 16384 1 dell_wmi
wmi 24576 4 dell_wmi,wmi_bmof,dell_smbios,dell_wmi_descriptor
video 45056 3 dell_wmi,dell_laptop,i915
##### interfaces ########################
[/etc/network/interfaces]
auto lo
iface lo inet loopback
##### ifconfig ##########################
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback <MAC address> brd <MAC address>
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eno1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel state DOWN group default qlen 1000
link/ether <MAC 'eno1' [IF1]> brd <MAC address>
3: wlp2s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
link/ether <MAC 'wlp2s0' [IF2]> brd <MAC address>
##### iwconfig ##########################
lo no wireless extensions.
eno1 no wireless extensions.
wlp2s0 IEEE 802.11 ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=15 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Power Management:on
##### route #############################
##### resolv.conf #######################
[777 root '/etc/resolv.conf' -> '../run/systemd/resolve/stub-resolv.conf']
nameserver 127.0.0.53
options edns0
##### network managers ##################
Installed:
NetworkManager
Running:
root 1010 1 0 14:37 ? 00:00:00 /usr/sbin/NetworkManager --no-daemon
##### NetworkManager info ###############
GENERAL.DEVICE: wlp2s0
GENERAL.TYPE: wifi
GENERAL.NM-TYPE: NMDeviceWifi
GENERAL.VENDOR: Intel Corporation
GENERAL.PRODUCT: Centrino Advanced-N 6205 [Taylor Peak] (Centrino Advanced-N 6205 AGN)
GENERAL.DRIVER: iwlwifi
GENERAL.DRIVER-VERSION: 4.15.0-54-generic
GENERAL.FIRMWARE-VERSION: 18.168.6.1
GENERAL.HWADDR: <MAC 'wlp2s0' [IF2]>
GENERAL.MTU: 1500
GENERAL.STATE: 60 (connecting (need authentication))
GENERAL.REASON: 0 (No reason given)
GENERAL.UDI: /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/net/wlp2s0
GENERAL.IP-IFACE: --
GENERAL.IS-SOFTWARE: no
GENERAL.NM-MANAGED: yes
GENERAL.AUTOCONNECT: yes
GENERAL.FIRMWARE-MISSING: no
GENERAL.NM-PLUGIN-MISSING: no
GENERAL.PHYS-PORT-ID: --
GENERAL.CONNECTION: Auto Digimood
GENERAL.CON-UUID: c199e92d-0397-449a-a965-81405d26a6e5
GENERAL.CON-PATH: /org/freedesktop/NetworkManager/ActiveConnection/2
GENERAL.METERED: unknown
CAPABILITIES.CARRIER-DETECT: no
CAPABILITIES.SPEED: unknown
CAPABILITIES.IS-SOFTWARE: no
CAPABILITIES.SRIOV: no
WIFI-PROPERTIES.WEP: yes
WIFI-PROPERTIES.WPA: yes
WIFI-PROPERTIES.WPA2: yes
WIFI-PROPERTIES.TKIP: yes
WIFI-PROPERTIES.CCMP: yes
WIFI-PROPERTIES.AP: yes
WIFI-PROPERTIES.ADHOC: yes
WIFI-PROPERTIES.2GHZ: yes
WIFI-PROPERTIES.5GHZ: yes
CONNECTIONS.AVAILABLE-CONNECTION-PATHS: /org/freedesktop/NetworkManager/Settings/{2}
CONNECTIONS.AVAILABLE-CONNECTIONS[1]: c199e92d-0397-449a-a965-81405d26a6e5 | Auto Digimood
GENERAL.DEVICE: eno1
GENERAL.TYPE: ethernet
GENERAL.NM-TYPE: NMDeviceEthernet
GENERAL.VENDOR: Intel Corporation
GENERAL.PRODUCT: 82579LM Gigabit Network Connection (Lewisville)
GENERAL.DRIVER: e1000e
GENERAL.DRIVER-VERSION: 3.2.6-k
GENERAL.FIRMWARE-VERSION: 0.13-3
GENERAL.HWADDR: <MAC 'eno1' [IF1]>
GENERAL.MTU: 1500
GENERAL.STATE: 20 (unavailable)
GENERAL.REASON: 2 (Device is now managed)
GENERAL.UDI: /sys/devices/pci0000:00/0000:00:19.0/net/eno1
GENERAL.IP-IFACE: --
GENERAL.IS-SOFTWARE: no
GENERAL.NM-MANAGED: yes
GENERAL.AUTOCONNECT: yes
GENERAL.FIRMWARE-MISSING: no
GENERAL.NM-PLUGIN-MISSING: no
GENERAL.PHYS-PORT-ID: --
GENERAL.CONNECTION: --
GENERAL.CON-UUID: --
GENERAL.CON-PATH: --
GENERAL.METERED: unknown
CAPABILITIES.CARRIER-DETECT: yes
CAPABILITIES.SPEED: unknown
CAPABILITIES.IS-SOFTWARE: no
CAPABILITIES.SRIOV: no
WIRED-PROPERTIES.CARRIER: off
CONNECTIONS.AVAILABLE-CONNECTION-PATHS: --
SSID BSSID MODE CHAN FREQ RATE SIGNAL BARS SECURITY ACTIVE IN-USE
Digimood <MAC 'Digimood' [AC2]> Infra 6 2437 MHz 65 Mbit/s 100 ▂▄▆█ WPA2 no
##### NetworkManager.state ##############
cat: /var/lib/NetworkManager/NetworkManager.state: No such file or directory
##### NetworkManager config #############
[[/etc/NetworkManager/conf.d/default-wifi-powersave-on.conf]]
[connection]
wifi.powersave = 3
[[/etc/NetworkManager/NetworkManager.conf]]
[main]
plugins=ifupdown,keyfile
[ifupdown]
managed=false
[device]
wifi.scan-rand-mac-address=no
[[/usr/lib/NetworkManager/conf.d/10-dns-resolved.conf]]
[main]
dns=systemd-resolved
[[/usr/lib/NetworkManager/conf.d/10-globally-managed-devices.conf]]
[keyfile]
unmanaged-devices=*,except:type:wifi,except:type:wwan
[[/usr/lib/NetworkManager/conf.d/20-connectivity-ubuntu.conf]]
[connectivity]
uri=http://connectivity-check.ubuntu.com/
[[/usr/lib/NetworkManager/conf.d/no-mac-addr-change.conf]]
[device-mac-addr-change-wifi]
match-device=driver:rtl8723bs,driver:rtl8189es,driver:r8188eu,driver:8188eu,driver:eagle_sdio,driver:wl
wifi.scan-rand-mac-address=no
wifi.cloned-mac-address=preserve
ethernet.cloned-mac-address=preserve
##### NetworkManager profiles ###########
[[/etc/NetworkManager/system-connections/Auto Digimood]] (600 root)
[connection] id=Auto Digimood | type=wifi | permissions=
[wifi] mac-address=<MAC 'wlp2s0' [IF2]> | mac-address-blacklist= | ssid=Digimood
[ipv4] method=auto
[ipv6] method=auto
##### Netplan config ####################
[/etc/netplan/1-network-manager-all.yaml]
network:
version: 2
renderer: NetworkManager
##### iw reg get ########################
Region: Etc/UTC (based on set time zone)
global
country 00: DFS-UNSET
(2402 - 2472 @ 40), (N/A, 20), (N/A)
(2457 - 2482 @ 20), (N/A, 20), (N/A), AUTO-BW, PASSIVE-SCAN
(2474 - 2494 @ 20), (N/A, 20), (N/A), NO-OFDM, PASSIVE-SCAN
(5170 - 5250 @ 80), (N/A, 20), (N/A), AUTO-BW, PASSIVE-SCAN
(5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS, AUTO-BW, PASSIVE-SCAN
(5490 - 5730 @ 160), (N/A, 20), (0 ms), DFS, PASSIVE-SCAN
(5735 - 5835 @ 80), (N/A, 20), (N/A), PASSIVE-SCAN
(57240 - 63720 @ 2160), (N/A, 0), (N/A)
##### iwlist channels ###################
lo no frequency information.
eno1 no frequency information.
wlp2s0 32 channels in total; available frequencies :
Channel 01 : 2.412 GHz
Channel 02 : 2.417 GHz
Channel 03 : 2.422 GHz
Channel 04 : 2.427 GHz
Channel 05 : 2.432 GHz
Channel 06 : 2.437 GHz
Channel 07 : 2.442 GHz
Channel 08 : 2.447 GHz
Channel 09 : 2.452 GHz
Channel 10 : 2.457 GHz
Channel 11 : 2.462 GHz
Channel 12 : 2.467 GHz
Channel 13 : 2.472 GHz
Channel 36 : 5.18 GHz
Channel 40 : 5.2 GHz
Channel 44 : 5.22 GHz
Channel 48 : 5.24 GHz
Channel 52 : 5.26 GHz
Channel 56 : 5.28 GHz
Channel 60 : 5.3 GHz
Channel 64 : 5.32 GHz
Channel 100 : 5.5 GHz
Channel 104 : 5.52 GHz
Channel 108 : 5.54 GHz
Channel 112 : 5.56 GHz
Channel 116 : 5.58 GHz
Channel 120 : 5.6 GHz
Channel 124 : 5.62 GHz
Channel 128 : 5.64 GHz
Channel 132 : 5.66 GHz
Channel 136 : 5.68 GHz
Channel 140 : 5.7 GHz
##### iwlist scan #######################
lo Interface doesn't support scanning.
eno1 Interface doesn't support scanning.
Channel occupancy:
1 APs on Frequency:2.412 GHz (Channel 1)
2 APs on Frequency:2.437 GHz (Channel 6)
1 APs on Frequency:2.452 GHz (Channel 9)
1 APs on Frequency:2.457 GHz (Channel 10)
4 APs on Frequency:2.462 GHz (Channel 11)
1 APs on Frequency:5.18 GHz (Channel 36)
2 APs on Frequency:5.22 GHz (Channel 44)
1 APs on Frequency:5.28 GHz (Channel 56)
1 APs on Frequency:5.2 GHz (Channel 40)
1 APs on Frequency:5.5 GHz (Channel 100)
wlp2s0 Scan completed :
Cell 01 - Address: <MAC 'TP-LINK_Multimedia' [AC1]>
Channel:1
Frequency:2.412 GHz (Channel 1)
Quality=31/70 Signal level=-79 dBm
Encryption key:on
ESSID:"TP-LINK_Multimedia"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
9 Mb/s; 12 Mb/s; 18 Mb/s
Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
Mode:Master
Extra:tsf=0000005e79d06a83
Extra: Last beacon: 3052ms ago
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : PSK
IE: WPA Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : PSK
Cell 02 - Address: <MAC 'Digimood' [AC2]>
Channel:6
Frequency:2.437 GHz (Channel 6)
Quality=70/70 Signal level=-29 dBm
Encryption key:on
ESSID:"Digimood"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 11 Mb/s
12 Mb/s; 24 Mb/s; 9 Mb/s
Bit Rates:18 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
Mode:Master
Extra:tsf=00000009c986239f
Extra: Last beacon: 2884ms ago
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : PSK
##### module infos ######################
[iwldvm]
filename: /lib/modules/4.15.0-54-generic/kernel/drivers/net/wireless/intel/iwlwifi/dvm/iwldvm.ko
license: GPL
author: Copyright(c) 2003- 2015 Intel Corporation <[email protected]>
description: Intel(R) Wireless WiFi Link AGN driver for Linux
srcversion: 5144A889CD9311D5F87BAC3
depends: mac80211,iwlwifi,cfg80211
retpoline: Y
intree: Y
name: iwldvm
vermagic: 4.15.0-54-generic SMP mod_unload
signat: PKCS#7
signer:
sig_key:
sig_hashalgo: md4
parm: force_cam:force continuously aware mode (no power saving at all) (bool)
[mac80211]
filename: /lib/modules/4.15.0-54-generic/kernel/net/mac80211/mac80211.ko
license: GPL
description: IEEE 802.11 subsystem
srcversion: 10B87D6D65DDD085D1326C9
depends: cfg80211
retpoline: Y
intree: Y
name: mac80211
vermagic: 4.15.0-54-generic SMP mod_unload
signat: PKCS#7
signer:
sig_key:
sig_hashalgo: md4
parm: minstrel_vht_only:Use only VHT rates when VHT is supported by sta. (bool)
parm: max_nullfunc_tries:Maximum nullfunc tx tries before disconnecting (reason 4). (int)
parm: max_probe_tries:Maximum probe tries before disconnecting (reason 4). (int)
parm: beacon_loss_count:Number of beacon intervals before we decide beacon was lost. (int)
parm: probe_wait_ms:Maximum time(ms) to wait for probe response before disconnecting (reason 4). (int)
parm: ieee80211_default_rc_algo:Default rate control algorithm for mac80211 to use (charp)
[iwlwifi]
filename: /lib/modules/4.15.0-54-generic/kernel/drivers/net/wireless/intel/iwlwifi/iwlwifi.ko
license: GPL
author: Copyright(c) 2003- 2015 Intel Corporation <[email protected]>
description: Intel(R) Wireless WiFi driver for Linux
firmware: iwlwifi-100-5.ucode
firmware: iwlwifi-1000-5.ucode
firmware: iwlwifi-135-6.ucode
firmware: iwlwifi-105-6.ucode
firmware: iwlwifi-2030-6.ucode
firmware: iwlwifi-2000-6.ucode
firmware: iwlwifi-5150-2.ucode
firmware: iwlwifi-5000-5.ucode
firmware: iwlwifi-6000g2b-6.ucode
firmware: iwlwifi-6000g2a-6.ucode
firmware: iwlwifi-6050-5.ucode
firmware: iwlwifi-6000-6.ucode
firmware: iwlwifi-7265D-29.ucode
firmware: iwlwifi-7265-17.ucode
firmware: iwlwifi-3168-29.ucode
firmware: iwlwifi-3160-17.ucode
firmware: iwlwifi-7260-17.ucode
firmware: iwlwifi-8265-34.ucode
firmware: iwlwifi-8000C-34.ucode
firmware: iwlwifi-9260-th-b0-jf-b0-34.ucode
firmware: iwlwifi-9260-th-a0-jf-a0-34.ucode
firmware: iwlwifi-9000-pu-a0-jf-b0-34.ucode
firmware: iwlwifi-9000-pu-b0-jf-b0-34.ucode
firmware: iwlwifi-9000-pu-a0-jf-a0-34.ucode
firmware: iwlwifi-QuQnj-a0-hr-a0-34.ucode
firmware: iwlwifi-QuQnj-a0-jf-b0-34.ucode
firmware: iwlwifi-QuQnj-f0-hr-a0-34.ucode
firmware: iwlwifi-Qu-a0-jf-b0-34.ucode
firmware: iwlwifi-Qu-a0-hr-a0-34.ucode
srcversion: 1AD55A6BECD5B5DFB5BBF7E
depends: cfg80211
retpoline: Y
intree: Y
name: iwlwifi
vermagic: 4.15.0-54-generic SMP mod_unload
signat: PKCS#7
signer:
sig_key:
sig_hashalgo: md4
parm: swcrypto:using crypto in software (default 0 [hardware]) (int)
parm: 11n_disable:disable 11n functionality, bitmap: 1: full, 2: disable agg TX, 4: disable agg RX, 8 enable agg TX (uint)
parm: amsdu_size:amsdu size 0: 12K for multi Rx queue devices, 4K for other devices 1:4K 2:8K 3:12K (default 0) (int)
parm: fw_restart:restart firmware in case of error (default true) (bool)
parm: antenna_coupling:specify antenna coupling in dB (default: 0 dB) (int)
parm: nvm_file:NVM file name (charp)
parm: d0i3_disable:disable d0i3 functionality (default: Y) (bool)
parm: lar_disable:disable LAR functionality (default: N) (bool)
parm: uapsd_disable:disable U-APSD functionality bitmap 1: BSS 2: P2P Client (default: 3) (uint)
parm: bt_coex_active:enable wifi/bt co-exist (default: enable) (bool)
parm: led_mode:0=system default, 1=On(RF On)/Off(RF Off), 2=blinking, 3=Off (default: 0) (int)
parm: power_save:enable WiFi power management (default: disable) (bool)
parm: power_level:default power save level (range from 1 - 5, default: 1) (int)
parm: fw_monitor:firmware monitor - to debug FW (default: false - needs lots of memory) (bool)
parm: d0i3_timeout:Timeout to D0i3 entry when idle (ms) (uint)
parm: disable_11ac:Disable VHT capabilities (default: false) (bool)
[cfg80211]
filename: /lib/modules/4.15.0-54-generic/kernel/net/wireless/cfg80211.ko
description: wireless configuration support
license: GPL
author: Johannes Berg
srcversion: C615A4309BFED95CEE6CECF
depends:
retpoline: Y
intree: Y
name: cfg80211
vermagic: 4.15.0-54-generic SMP mod_unload
signat: PKCS#7
signer:
sig_key:
sig_hashalgo: md4
parm: bss_entries_limit:limit to number of scan BSS entries (per wiphy, default 1000) (int)
parm: ieee80211_regdom:IEEE 802.11 regulatory domain code (charp)
parm: cfg80211_disable_40mhz_24ghz:Disable 40MHz support in the 2.4GHz band (bool)
##### module parameters #################
[iwldvm]
force_cam: Y
[mac80211]
beacon_loss_count: 7
ieee80211_default_rc_algo: minstrel_ht
max_nullfunc_tries: 2
max_probe_tries: 5
minstrel_vht_only: Y
probe_wait_ms: 500
[iwlwifi]
11n_disable: 0
amsdu_size: 0
antenna_coupling: 0
bt_coex_active: Y
d0i3_disable: Y
d0i3_timeout: 1000
disable_11ac: N
fw_monitor: N
fw_restart: Y
lar_disable: N
led_mode: 0
nvm_file: (null)
power_level: 0
power_save: N
swcrypto: 0
uapsd_disable: 3
[cfg80211]
bss_entries_limit: 1000
cfg80211_disable_40mhz_24ghz: N
ieee80211_regdom: 00
##### /etc/modules ######################
##### modprobe options ##################
[/etc/modprobe.d/blacklist-ath_pci.conf]
blacklist ath_pci
[/etc/modprobe.d/blacklist.conf]
blacklist evbug
blacklist usbmouse
blacklist usbkbd
blacklist eepro100
blacklist de4x5
blacklist eth1394
blacklist snd_intel8x0m
blacklist snd_aw2
blacklist i2c_i801
blacklist prism54
blacklist bcm43xx
blacklist garmin_gps
blacklist asus_acpi
blacklist snd_pcsp
blacklist pcspkr
blacklist amd76x_edac
[/etc/modprobe.d/blacklist-rare-network.conf]
alias net-pf-3 off
alias net-pf-6 off
alias net-pf-9 off
alias net-pf-11 off
alias net-pf-12 off
alias net-pf-19 off
alias net-pf-21 off
alias net-pf-36 off
[/etc/modprobe.d/iwlwifi.conf]
remove iwlwifi \
(/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod) \
&& /sbin/modprobe -r mac80211
##### rc.local ##########################
grep: /etc/rc.local: No such file or directory
##### pm-utils ##########################
##### udev rules ########################
##### dmesg #############################
[ 15.458432] iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 15.571558] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ 15.786633] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 15.786635] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[ 15.786637] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 15.786639] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
[ 15.880091] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 15.895838] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[ 16.161193] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready (repeated 2 times)
[ 16.396102] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 16.409291] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 (repeated 2 times)
[ 16.797403] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready (repeated 2 times)
[ 40.724017] wlp2s0: authenticate with <MAC 'Digimood' [AC2]>
[ 40.727826] wlp2s0: send auth to <MAC 'Digimood' [AC2]> (try 1/3)
[ 40.729598] wlp2s0: authenticated
[ 40.732150] wlp2s0: associate with <MAC 'Digimood' [AC2]> (try 1/3)
[ 40.735565] wlp2s0: RX AssocResp from <MAC 'Digimood' [AC2]> (capab=0x8431 status=0 aid=1)
[ 40.737865] wlp2s0: associated
[ 50.739306] wlp2s0: deauthenticating from <MAC 'Digimood' [AC2]> by local choice (Reason: 3=DEAUTH_LEAVING)
[ 53.934004] wlp2s0: authenticate with <MAC 'Digimood' [AC2]>
[ 53.935936] wlp2s0: send auth to <MAC 'Digimood' [AC2]> (try 1/3)
[ 53.937699] wlp2s0: authenticated
[ 53.940301] wlp2s0: associate with <MAC 'Digimood' [AC2]> (try 1/3)
[ 53.943749] wlp2s0: RX AssocResp from <MAC 'Digimood' [AC2]> (capab=0x8431 status=0 aid=1)
[ 53.946205] wlp2s0: associated
[ 63.002431] wlp2s0: deauthenticating from <MAC 'Digimood' [AC2]> by local choice (Reason: 3=DEAUTH_LEAVING)
[ 72.350712] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 94.585399] wlp2s0: authenticate with <MAC 'Digimood' [AC2]>
[ 94.586723] wlp2s0: send auth to <MAC 'Digimood' [AC2]> (try 1/3)
[ 94.588565] wlp2s0: authenticated
[ 94.592217] wlp2s0: associate with <MAC 'Digimood' [AC2]> (try 1/3)
[ 94.595628] wlp2s0: RX AssocResp from <MAC 'Digimood' [AC2]> (capab=0x8431 status=0 aid=1)
[ 94.597919] wlp2s0: associated
[ 104.599237] wlp2s0: deauthenticating from <MAC 'Digimood' [AC2]> by local choice (Reason: 3=DEAUTH_LEAVING)
########## wireless info END ############ Teraz jestem podlaczona do innej sieci na tym Mincie.
Liczba postów: 4 210
Liczba wątków: 76
Dołączył: Dec 2018
Reputacja:
System: Inny
Środowisko graficzne: Xfce
Architektura CPU: 64bit
Inny System: Debian testing/sid
Miernik podziękowań 39%
0 Spróbowałbym dla testu wyłączyć NM i połączyć się z poziomu interfaces.
Liczba postów: 12
Liczba wątków: 2
Dołączył: Oct 2019
Reputacja:
System: 19.2 Tina
Środowisko graficzne: GNOME
Architektura CPU: 64bit
Miernik podziękowań 0%
0 A tak po ludzku, żeby nawet ktoś z doktoratem zrozumiał?
|