Liczba postów: 18
Liczba wątków: 3
Dołączył: Apr 2020
Reputacja:
System: 19.3 Tricia
Środowisko graficzne: Cinnamon
Architektura CPU: 64bit
Miernik podziękowań 0%
03-04-2020, 21:01
(Ten post był ostatnio modyfikowany: 05-04-2020, 14:30 przez dedito.)
0 Witam wszystkich.
Zainstalowałem najnowsza wersję Linux Mint i tak jak w starszej pojawił się problem z kartą usb-wifi.
W sieci jest informacja jak to zrobić i zadziałało mi na poprzedniej wersji jednak tutaj nie działa ta instalacja.
Ma może ktoś jakiś pomysł?
karta: https://grylewicz.pl/karta-wifi-tl-wn822...inux-mint/
Kod: tedi1@tedi1-GA-870A-USB3:~$ inxi -Fxz
System:
Host: tedi1-GA-870A-USB3 Kernel: 5.3.0-45-generic x86_64 bits: 64
compiler: gcc v: 7.5.0 Desktop: Cinnamon 4.4.8
Distro: Linux Mint 19.3 Tricia base: Ubuntu 18.04 bionic
Machine:
Type: Desktop Mobo: Gigabyte model: GA-870A-USB3 serial: <filter>
BIOS: Award v: F4 date: 03/09/2011
CPU:
Topology: Quad Core model: AMD Phenom II X4 955 bits: 64 type: MCP
arch: K10 rev: 3 L2 cache: 2048 KiB
flags: lm nx pae sse sse2 sse3 sse4a svm bogomips: 25717
Speed: 800 MHz min/max: 800/3200 MHz Core speeds (MHz): 1: 800 2: 800
3: 800 4: 800
Graphics:
Device-1: NVIDIA GF108 [GeForce GT 430] vendor: ZOTAC driver: nvidia
v: 390.116 bus ID: 01:00.0
Display: x11 server: X.Org 1.20.5 driver: nvidia
unloaded: fbdev,modesetting,nouveau,vesa resolution: 1280x768~60Hz
OpenGL: renderer: GeForce GT 430/PCIe/SSE2 v: 4.6.0 NVIDIA 390.116
direct render: Yes
Audio:
Device-1: AMD SBx00 Azalia vendor: Gigabyte driver: snd_hda_intel
v: kernel bus ID: 00:14.2
Device-2: NVIDIA GF108 High Definition Audio vendor: ZOTAC
driver: snd_hda_intel v: kernel bus ID: 01:00.1
Sound Server: ALSA v: k5.3.0-45-generic
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: Gigabyte driver: r8169 v: kernel port: ae00 bus ID: 05:00.0
IF: enp5s0 state: up speed: 100 Mbps duplex: full mac: <filter>
IF-ID-1: wlx18d6c7122b11 state: down mac: <filter>
Drives:
Local Storage: total: 381.93 GiB used: 7.45 GiB (2.0%)
ID-1: /dev/sda vendor: Western Digital model: WD2500KS-00MJB0
size: 232.88 GiB
ID-2: /dev/sdb vendor: Western Digital model: WD1600JS-00MHB0
size: 149.05 GiB
Partition:
ID-1: / size: 27.38 GiB used: 7.18 GiB (26.2%) fs: ext4 dev: /dev/sdb1
ID-2: /home size: 118.71 GiB used: 271.1 MiB (0.2%) fs: ext4
dev: /dev/sdb5
ID-3: swap-1 size: 4.00 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda5
Sensors:
System Temperatures: cpu: 38.5 C mobo: N/A gpu: nvidia temp: 57 C
Fan Speeds (RPM): N/A gpu: nvidia fan: 58%
Info:
Processes: 193 Uptime: 7m Memory: 3.84 GiB used: 1.19 GiB (30.9%)
Init: systemd runlevel: 5 Compilers: gcc: 7.5.0 Shell: bash v: 4.4.20
inxi: 3.0.32
Liczba postów: 2 530
Liczba wątków: 24
Dołączył: Jan 2019
Reputacja:
System: 21.3 Virginia
Środowisko graficzne: Cinnamon
Architektura CPU: 64bit
Miernik podziękowań 24%
0 Tu widać tylko kartę sieciową Realteka (kabel).
Podłącz tę kartę wifi i pokaż, co zwróci polecenie lsusb (LSUSB).
Szukamy konkretnego czipsetu, żeby dobrać do niego odpowiedni sterownik.
Liczba postów: 18
Liczba wątków: 3
Dołączył: Apr 2020
Reputacja:
System: 19.3 Tricia
Środowisko graficzne: Cinnamon
Architektura CPU: 64bit
Miernik podziękowań 0%
04-04-2020, 17:08
(Ten post był ostatnio modyfikowany: 04-04-2020, 17:29 przez chomont.)
0 (04-04-2020, 15:00)yahoob3 napisał(a): Tu widać tylko kartę sieciową Realteka (kabel).
Podłącz tę kartę wifi i pokaż, co zwróci polecenie lsusb (LSUSB).
Szukamy konkretnego czipsetu, żeby dobrać do niego odpowiedni sterownik. Problem w tym że karta jest podłączona na drugim starym linuksie była widoczna i działała w tym samym porcie. Spróbuję odłączyć na chwilę kabel i zapodać tą komendę bez połączenia kablowego.
Dodano po pewnym czasie:
No dziwne to jest, teraz sama od siebie zaczęła teraz działać i taki wynik jest z tego polecenia
Kod: Bus 003 Device 002: ID 04a9:221c Canon, Inc. CanoScan LiDE 60
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 002: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for Bluetooth
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 0c45:62c0 Microdia Sonix USB 2.0 Camera
Bus 002 Device 004: ID 2357:0108
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Spróbuję jeszcze zrestartować. Niestety po restarcie znowu jej nie uruchamia dopiero jak wyłączę przewód usb i włączę to się uruchamia i działa. dodam jeszczewpis edytując jaki będzie wynik tej komendy w momencie po restarcie zanim wyl/wł usb
Kod: tedi1@tedi1-GA-870A-USB3:~$ lsusb
Bus 003 Device 002: ID 04a9:221c Canon, Inc. CanoScan LiDE 60
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 002: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for Bluetooth
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 0c45:62c0 Microdia Sonix USB 2.0 Camera
Bus 002 Device 002: ID 2357:0108
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Cóż wynik wygląda identycznie. Nie wiem co począć.
Liczba postów: 2 530
Liczba wątków: 24
Dołączył: Jan 2019
Reputacja:
System: 21.3 Virginia
Środowisko graficzne: Cinnamon
Architektura CPU: 64bit
Miernik podziękowań 24%
0 Cytat:Niestety po restarcie znowu jej nie uruchamia dopiero jak wyłączę przewód usb i włączę to się uruchamia i działa. dodam jeszcze wpis edytując jaki będzie wynik tej komendy w momencie po restarcie zanim wyl/wł usb
Czegoś nie rozumiem. Jaki przewód USB? Czy to jest komputer stacjonarny? Składak?
Czy próbowałeś wpiąć tę kartę w inny port? Sugerowałbym USB2, nie USB3.
Podaj wynik polecenia lsusb kiedy karta będzie działała. Czyli kiedy będzie widoczna dla systemu.
Liczba postów: 18
Liczba wątków: 3
Dołączył: Apr 2020
Reputacja:
System: 19.3 Tricia
Środowisko graficzne: Cinnamon
Architektura CPU: 64bit
Miernik podziękowań 0%
04-04-2020, 22:40
(Ten post był ostatnio modyfikowany: 04-04-2020, 22:41 przez chomont.)
0 (04-04-2020, 20:56)yahoob3 napisał(a): Cytat:Niestety po restarcie znowu jej nie uruchamia dopiero jak wyłączę przewód usb i włączę to się uruchamia i działa. dodam jeszcze wpis edytując jaki będzie wynik tej komendy w momencie po restarcie zanim wyl/wł usb
Czegoś nie rozumiem. Jaki przewód USB? Czy to jest komputer stacjonarny? Składak?
Czy próbowałeś wpiąć tę kartę w inny port? Sugerowałbym USB2, nie USB3.
Podaj wynik polecenia lsusb kiedy karta będzie działała. Czyli kiedy będzie widoczna dla systemu. Tak to jest komputer stacjonarny. Na pewno składak. Wif jest po kablu usb. Wynik jeszcze raz zamieszczam jak komputer działa na tej karcie.
Kod: tedi1@tedi1-GA-870A-USB3:~$ lsusb
Bus 003 Device 002: ID 04a9:221c Canon, Inc. CanoScan LiDE 60
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 002: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for Bluetooth
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 0c45:62c0 Microdia Sonix USB 2.0 Camera
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 2357:0108
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Liczba postów: 2 530
Liczba wątków: 24
Dołączył: Jan 2019
Reputacja:
System: 21.3 Virginia
Środowisko graficzne: Cinnamon
Architektura CPU: 64bit
Miernik podziękowań 24%
05-04-2020, 09:53
(Ten post był ostatnio modyfikowany: 05-04-2020, 10:16 przez yahoob3.)
0 A może spróbuj wpiąć kartę bezpośrednio w port USB. Jakoś ten kabel USB mi się nie podoba.
Mam podobną i nie mam z nią żadnego problemu. Wpinam i działa.
Jeśli masz tam też inny system (np. Windows), to czy na nim karta jest widoczna i działa?
OK, spróbuj kolejno wykonać poniższe komendy w terminalu. Kopiuj stąd i wklejaj do terminala (Ctrl+Shift+V):
Kod: sudo apt-get update && sudo apt-get install git dkms build-essential
git clone https://github.com/jeremyb31/rtl8192eu-linux-driver.git
sudo dkms add ./rtl8192eu-linux-driver
sudo dkms install rtl8192eu/1.0
Każdą kolejną komendę wykonaj dopiero, gdy poprzednia zostanie ukończona.
Liczba postów: 4 211
Liczba wątków: 76
Dołączył: Dec 2018
Reputacja:
System: Inny
Środowisko graficzne: Xfce
Architektura CPU: 64bit
Inny System: Debian testing/sid
Miernik podziękowań 39%
Liczba postów: 18
Liczba wątków: 3
Dołączył: Apr 2020
Reputacja:
System: 19.3 Tricia
Środowisko graficzne: Cinnamon
Architektura CPU: 64bit
Miernik podziękowań 0%
05-04-2020, 11:56
(Ten post był ostatnio modyfikowany: 05-04-2020, 12:20 przez chomont.)
0 (05-04-2020, 09:53)yahoob3 napisał(a): A może spróbuj wpiąć kartę bezpośrednio w port USB. Jakoś ten kabel USB mi się nie podoba.
Mam podobną i nie mam z nią żadnego problemu. Wpinam i działa.
Jeśli masz tam też inny system (np. Windows), to czy na nim karta jest widoczna i działa?
OK, spróbuj kolejno wykonać poniższe komendy w terminalu. Kopiuj stąd i wklejaj do terminala (Ctrl+Shift+V):
Kod: sudo apt-get update && sudo apt-get install git dkms build-essential
git clone https://github.com/jeremyb31/rtl8192eu-linux-driver.git
sudo dkms add ./rtl8192eu-linux-driver
sudo dkms install rtl8192eu/1.0
Każdą kolejną komendę wykonaj dopiero, gdy poprzednia zostanie ukończona. Tak jak napisałem wcześniej na drugim starym ale jeszcze działającym mint 18... działa po każdym uruchomieniu a wpięta karta jest w to samo gniazdo. Poza tym chyba nie masz tej samej karty jak ją możesz wpiąć bezpośrednio  to ta karta: https://grylewicz.pl/karta-wifi-tl-wn822...inux-mint/
Dodano po pewnym czasie:
(05-04-2020, 10:22)dedito napisał(a): A jak i z tym będzie problem, to proponuje podać wynik skryptu. https://forum.linuxmint.pl/showthread.ph...78#pid1078
Coś od czego w zasadzie powinien się zacząć wątek, zgodnie z zasadami forum. Niestety dalej to samo
wklejam wynik:
Kod: ########## wireless info START ##########
Report from: 05 Apr 2020 12:16 CEST +0200
Booted last: 05 Apr 2020 00:00 CEST +0200
Script from: 22 Oct 2018 03:34 UTC +0000
##### release ###########################
Distributor ID: LinuxMint
Description: Linux Mint 19.3 Tricia
Release: 19.3
Codename: tricia
##### kernel ############################
Linux 5.3.0-45-generic #37~18.04.1-Ubuntu SMP Fri Mar 27 15:58:10 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
Parameters: ro, quiet, splash, vt.handoff=1
##### desktop ###########################
Cinnamon
##### lspci #############################
05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)
Subsystem: Gigabyte Technology Co., Ltd Onboard Ethernet [1458:e000]
Kernel driver in use: r8169
##### lsusb #############################
Bus 003 Device 002: ID 04a9:221c Canon, Inc. CanoScan LiDE 60
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 002: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for Bluetooth
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 0c45:62c0 Microdia Sonix USB 2.0 Camera
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 2357:0108
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
##### PCMCIA card info ##################
##### rfkill ############################
1: phy1: Wireless LAN
Soft blocked: no
Hard blocked: no
##### secure boot #######################
'mokutil' is not installed (package "mokutil").
##### lsmod #############################
rtl8xxxu 126976 0
mac80211 847872 1 rtl8xxxu
cfg80211 704512 1 mac80211
libarc4 16384 1 mac80211
wmi_bmof 16384 0
wmi 32768 1 wmi_bmof
##### interfaces ########################
[/etc/network/interfaces]
auto lo
iface lo inet loopback
##### ifconfig ##########################
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp5s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel state DOWN group default qlen 1000
link/ether 50:e5:49:36:32:a4 brd ff:ff:ff:ff:ff:ff
4: wlx18d6c7122b11: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 18:d6:c7:12:2b:11 brd ff:ff:ff:ff:ff:ff
inet 192.168.202.108/24 brd 192.168.202.255 scope global dynamic noprefixroute wlx18d6c7122b11
valid_lft 43140sec preferred_lft 43140sec
inet6 fe80::9f3:ce96:f7ad:bc4a/64 scope link noprefixroute
valid_lft forever preferred_lft forever
##### iwconfig ##########################
lo no wireless extensions.
enp5s0 no wireless extensions.
wlx18d6c7122b11 IEEE 802.11 ESSID:"Tedy"
Mode:Managed Frequency:2.422 GHz Access Point: 84:16:F9:80:8E:06
Bit Rate=1 Mb/s Tx-Power=20 dBm
Retry short limit:7 RTS thr=2347 B Fragment thr:off
Power Management:off
Link Quality=26/70 Signal level=-84 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:1 Missed beacon:0
##### route #############################
default via 192.168.202.1 dev wlx18d6c7122b11 proto dhcp metric 600
169.254.0.0/16 dev wlx18d6c7122b11 scope link metric 1000
192.168.202.0/24 dev wlx18d6c7122b11 proto kernel scope link src 192.168.202.108 metric 600
##### resolv.conf #######################
[777 root '/etc/resolv.conf' -> '../run/systemd/resolve/stub-resolv.conf']
nameserver 127.0.0.53
options edns0
##### network managers ##################
Installed:
NetworkManager
Running:
root 811 1 0 12:13 ? 00:00:00 /usr/sbin/NetworkManager --no-daemon
##### NetworkManager info ###############
GENERAL.DEVICE: wlx18d6c7122b11
GENERAL.TYPE: wifi
GENERAL.NM-TYPE: NMDeviceWifi
GENERAL.VENDOR: Realtek
GENERAL.PRODUCT: 802.11n NIC
GENERAL.DRIVER: rtl8xxxu
GENERAL.DRIVER-VERSION: 5.3.0-45-generic
GENERAL.FIRMWARE-VERSION: N/A
GENERAL.HWADDR: 18:D6:C7:12:2B:11
GENERAL.MTU: 1500
GENERAL.STATE: 100 (connected)
GENERAL.REASON: 0 (No reason given)
GENERAL.UDI: /sys/devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2:1.0/net/wlx18d6c7122b11
GENERAL.IP-IFACE: wlx18d6c7122b11
GENERAL.IS-SOFTWARE: no
GENERAL.NM-MANAGED: yes
GENERAL.AUTOCONNECT: yes
GENERAL.FIRMWARE-MISSING: no
GENERAL.NM-PLUGIN-MISSING: no
GENERAL.PHYS-PORT-ID: --
GENERAL.CONNECTION: Automatyczne Tedy
GENERAL.CON-UUID: a9c88a89-2be2-4809-915a-a953bf9d9277
GENERAL.CON-PATH: /org/freedesktop/NetworkManager/ActiveConnection/8
GENERAL.METERED: no (guessed)
CAPABILITIES.CARRIER-DETECT: no
CAPABILITIES.SPEED: 1 Mb/s
CAPABILITIES.IS-SOFTWARE: no
CAPABILITIES.SRIOV: no
WIFI-PROPERTIES.WEP: yes
WIFI-PROPERTIES.WPA: yes
WIFI-PROPERTIES.WPA2: yes
WIFI-PROPERTIES.TKIP: yes
WIFI-PROPERTIES.CCMP: yes
WIFI-PROPERTIES.AP: no
WIFI-PROPERTIES.ADHOC: no
WIFI-PROPERTIES.2GHZ: yes
WIFI-PROPERTIES.5GHZ: no
IP4.ADDRESS[1]: 192.168.202.108/24
IP4.GATEWAY: 192.168.202.1
IP4.ROUTE[1]: dst = 0.0.0.0/0, nh = 192.168.202.1, mt = 600
IP4.ROUTE[2]: dst = 192.168.202.0/24, nh = 0.0.0.0, mt = 600
IP4.ROUTE[3]: dst = 169.254.0.0/16, nh = 0.0.0.0, mt = 1000
IP4.DNS[1]: 192.168.202.1
DHCP4.OPTION[1]: requested_routers = 1
DHCP4.OPTION[2]: requested_domain_search = 1
DHCP4.OPTION[3]: requested_netbios_name_servers = 1
DHCP4.OPTION[4]: requested_host_name = 1
DHCP4.OPTION[5]: requested_time_offset = 1
DHCP4.OPTION[6]: requested_domain_name = 1
DHCP4.OPTION[7]: requested_rfc3442_classless_static_routes = 1
DHCP4.OPTION[8]: requested_broadcast_address = 1
DHCP4.OPTION[9]: requested_netbios_scope = 1
DHCP4.OPTION[10]: requested_wpad = 1
DHCP4.OPTION[11]: next_server = 192.168.202.1
DHCP4.OPTION[12]: broadcast_address = 192.168.202.255
DHCP4.OPTION[13]: requested_interface_mtu = 1
DHCP4.OPTION[14]: requested_subnet_mask = 1
DHCP4.OPTION[15]: routers = 192.168.202.1
DHCP4.OPTION[16]: ip_address = 192.168.202.108
DHCP4.OPTION[17]: subnet_mask = 255.255.255.0
DHCP4.OPTION[18]: requested_domain_name_servers = 1
DHCP4.OPTION[19]: requested_static_routes = 1
DHCP4.OPTION[20]: requested_ntp_servers = 1
DHCP4.OPTION[21]: expiry = 1586124956
DHCP4.OPTION[22]: dhcp_lease_time = 43200
DHCP4.OPTION[23]: requested_ms_classless_static_routes = 1
DHCP4.OPTION[24]: ntp_servers = 89.39.108.254
DHCP4.OPTION[25]: dhcp_message_type = 5
DHCP4.OPTION[26]: network_number = 192.168.202.0
DHCP4.OPTION[27]: dhcp_server_identifier = 192.168.202.1
DHCP4.OPTION[28]: domain_name_servers = 192.168.202.1
IP6.ADDRESS[1]: fe80::9f3:ce96:f7ad:bc4a/64
IP6.GATEWAY: --
IP6.ROUTE[1]: dst = ff00::/8, nh = ::, mt = 256, table=255
IP6.ROUTE[2]: dst = fe80::/64, nh = ::, mt = 256
IP6.ROUTE[3]: dst = fe80::/64, nh = ::, mt = 600
CONNECTIONS.AVAILABLE-CONNECTION-PATHS: /org/freedesktop/NetworkManager/Settings/{3,2,1,4}
CONNECTIONS.AVAILABLE-CONNECTIONS[1]: a9c88a89-2be2-4809-915a-a953bf9d9277 | Automatyczne Tedy
CONNECTIONS.AVAILABLE-CONNECTIONS[2]: 5af21d28-b6d4-4c2b-8b21-6259bf9520f8 | Automatyczne Apartament
CONNECTIONS.AVAILABLE-CONNECTIONS[3]: 37892e2d-03a8-433a-8849-ab21f6cb6964 | MikroTik_EXT
CONNECTIONS.AVAILABLE-CONNECTIONS[4]: 09b89967-0282-4375-9c03-807d56da2acb | Automatyczne GAWRA
GENERAL.DEVICE: enp5s0
GENERAL.TYPE: ethernet
GENERAL.NM-TYPE: NMDeviceEthernet
GENERAL.VENDOR: Realtek Semiconductor Co., Ltd.
GENERAL.PRODUCT: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (Onboard Ethernet)
GENERAL.DRIVER: r8169
GENERAL.DRIVER-VERSION: --
GENERAL.FIRMWARE-VERSION: --
GENERAL.HWADDR: 50:E5:49:36:32:A4
GENERAL.MTU: 1500
GENERAL.STATE: 20 (unavailable)
GENERAL.REASON: 2 (Device is now managed)
GENERAL.UDI: /sys/devices/pci0000:00/0000:00:15.1/0000:05:00.0/net/enp5s0
GENERAL.IP-IFACE: --
GENERAL.IS-SOFTWARE: no
GENERAL.NM-MANAGED: yes
GENERAL.AUTOCONNECT: yes
GENERAL.FIRMWARE-MISSING: no
GENERAL.NM-PLUGIN-MISSING: no
GENERAL.PHYS-PORT-ID: --
GENERAL.CONNECTION: --
GENERAL.CON-UUID: --
GENERAL.CON-PATH: --
GENERAL.METERED: unknown
CAPABILITIES.CARRIER-DETECT: yes
CAPABILITIES.SPEED: unknown
CAPABILITIES.IS-SOFTWARE: no
CAPABILITIES.SRIOV: no
WIRED-PROPERTIES.CARRIER: off
CONNECTIONS.AVAILABLE-CONNECTION-PATHS: --
SSID BSSID MODE CHAN FREQ RATE SIGNAL BARS SECURITY ACTIVE IN-USE
Tedy 84:16:F9:80:8E:06 Infra 3 2422 MHz 130 Mbit/s 63 ▂▄▆_ WPA2 yes *
nowak EC:08:6B:CE:30:52 Infra 1 2412 MHz 270 Mbit/s 0 ____ -- no
MikroTik_EXT 50:D4:F7:8B:FF:C5 Infra 1 2412 MHz 130 Mbit/s 0 ____ WPA1 WPA2 no
Apartament 4C:5E:0C:BB:9B:97 Infra 5 2432 MHz 270 Mbit/s 0 ____ WPA2 no
GAWRA 4C:5E:0C:C2:89:E1 Infra 5 2432 MHz 130 Mbit/s 0 ____ WPA2 no
Polineo_69 E0:5A:9F:6E:D7:58 Infra 10 2457 MHz 130 Mbit/s 0 ____ WPA1 WPA2 no
##### NetworkManager.state ##############
[main]
NetworkingEnabled=true
WirelessEnabled=true
WWANEnabled=true
##### NetworkManager config #############
[[/etc/NetworkManager/conf.d/default-wifi-powersave-on.conf]]
[connection]
wifi.powersave = 3
[[/etc/NetworkManager/NetworkManager.conf]]
[main]
plugins=ifupdown,keyfile
[ifupdown]
managed=false
[device]
wifi.scan-rand-mac-address=no
[[/usr/lib/NetworkManager/conf.d/10-dns-resolved.conf]]
[main]
dns=systemd-resolved
[[/usr/lib/NetworkManager/conf.d/10-globally-managed-devices.conf]]
[keyfile]
unmanaged-devices=*,except:type:wifi,except:type:wwan
[[/usr/lib/NetworkManager/conf.d/20-connectivity-ubuntu.conf]]
[connectivity]
uri=http://connectivity-check.ubuntu.com/
[[/usr/lib/NetworkManager/conf.d/no-mac-addr-change.conf]]
[device-mac-addr-change-wifi]
match-device=driver:rtl8723bs,driver:rtl8189es,driver:r8188eu,driver:8188eu,driver:eagle_sdio,driver:wl
wifi.scan-rand-mac-address=no
wifi.cloned-mac-address=preserve
ethernet.cloned-mac-address=preserve
##### NetworkManager profiles ###########
Liczba postów: 4 211
Liczba wątków: 76
Dołączył: Dec 2018
Reputacja:
System: Inny
Środowisko graficzne: Xfce
Architektura CPU: 64bit
Inny System: Debian testing/sid
Miernik podziękowań 39%
05-04-2020, 13:56
(Ten post był ostatnio modyfikowany: 05-04-2020, 14:31 przez dedito.)
0 Wkleiłeś niepełny log, uzupełnij.
Jednak już z tego niepełnego wynika, że jesteś połączony z routerem "Tedy".
Kod: SID BSSID MODE CHAN FREQ RATE SIGNAL BARS SECURITY ACTIVE IN-USE
Tedy 84:16:F9:80:8E:06 Infra 3 2422 MHz 130 Mbit/s 63 ▂▄▆_ WPA2 yes *
Link wygląda na w miarę stabilny, także problem chyba jest gdzieś indziej.
Poza uzupełnieniem powyższego logu, wrzuć wynik polecenia ping 8.8.8.8 i ping www.google.pl
Liczba postów: 18
Liczba wątków: 3
Dołączył: Apr 2020
Reputacja:
System: 19.3 Tricia
Środowisko graficzne: Cinnamon
Architektura CPU: 64bit
Miernik podziękowań 0%
05-04-2020, 16:15
(Ten post był ostatnio modyfikowany: 05-04-2020, 16:35 przez chomont.)
0 (05-04-2020, 13:56)dedito napisał(a): Wkleiłeś niepełny log, uzupełnij.
Jednak już z tego niepełnego wynika, że jesteś połączony z routerem "Tedy".
Kod: SID BSSID MODE CHAN FREQ RATE SIGNAL BARS SECURITY ACTIVE IN-USE
Tedy 84:16:F9:80:8E:06 Infra 3 2422 MHz 130 Mbit/s 63 ▂▄▆_ WPA2 yes *
Poza uzupełnieniem powyższego logu, wrzuć wynik polecenia ping 8.8.8.8 i ping www.google.pl Mówiąc szczerze to wkleiłem całość co było w tym dokumencie. Jestem podłączony do tej sieci ale dopiero po uruchomieniu komputera jak odłączę kabel usb i włączę ponownie inaczej nie ma możliwości podłączenia wifi chociażby ile razy klikać i nawet wyłączać i włączać bezprzewodowe sieci. Ping jak jest podłączona sieć jest w miarę ok
Kod: tedi1@tedi1-GA-870A-USB3:~$ ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
64 bytes from 8.8.8.8: icmp_seq=1 ttl=58 time=37.5 ms
64 bytes from 8.8.8.8: icmp_seq=2 ttl=58 time=215 ms
64 bytes from 8.8.8.8: icmp_seq=3 ttl=58 time=43.7 ms
64 bytes from 8.8.8.8: icmp_seq=4 ttl=58 time=25.4 ms
64 bytes from 8.8.8.8: icmp_seq=5 ttl=58 time=24.6 ms
64 bytes from 8.8.8.8: icmp_seq=6 ttl=58 time=26.4 ms
64 bytes from 8.8.8.8: icmp_seq=7 ttl=58 time=26.0 ms
64 bytes from 8.8.8.8: icmp_seq=8 ttl=58 time=32.8 ms
64 bytes from 8.8.8.8: icmp_seq=9 ttl=58 time=53.0 ms
64 bytes from 8.8.8.8: icmp_seq=10 ttl=58 time=37.9 ms
64 bytes from 8.8.8.8: icmp_seq=11 ttl=58 time=32.9 ms
64 bytes from 8.8.8.8: icmp_seq=12 ttl=58 time=27.7 ms
64 bytes from 8.8.8.8: icmp_seq=13 ttl=58 time=39.6 ms
64 bytes from 8.8.8.8: icmp_seq=14 ttl=58 time=27.1 ms
64 bytes from 8.8.8.8: icmp_seq=15 ttl=58 time=31.2 ms
64 bytes from 8.8.8.8: icmp_seq=16 ttl=58 time=32.1 ms
64 bytes from 8.8.8.8: icmp_seq=17 ttl=58 time=28.9 ms
64 bytes from 8.8.8.8: icmp_seq=18 ttl=58 time=24.8 ms
64 bytes from 8.8.8.8: icmp_seq=19 ttl=58 time=37.4 ms
64 bytes from 8.8.8.8: icmp_seq=20 ttl=58 time=21.8 ms
64 bytes from 8.8.8.8: icmp_seq=21 ttl=58 time=27.5 ms
64 bytes from 8.8.8.8: icmp_seq=22 ttl=58 time=29.8 ms
64 bytes from 8.8.8.8: icmp_seq=23 ttl=58 time=36.9 ms
64 bytes from 8.8.8.8: icmp_seq=24 ttl=58 time=61.3 ms
64 bytes from 8.8.8.8: icmp_seq=25 ttl=58 time=31.5 ms
64 bytes from 8.8.8.8: icmp_seq=26 ttl=58 time=27.9 ms
64 bytes from 8.8.8.8: icmp_seq=27 ttl=58 time=43.9 ms
^C
--- 8.8.8.8 ping statistics ---
27 packets transmitted, 27 received, 0% packet loss, time 26036ms
rtt min/avg/max/mdev = 21.819/40.234/215.363/35.467 ms
a z google tak samo ok.
Kod: tedi1@tedi1-GA-870A-USB3:~$ ping www.google.pl
PING www.google.pl (172.217.16.3) 56(84) bytes of data.
64 bytes from waw02s13-in-f3.1e100.net (172.217.16.3): icmp_seq=1 ttl=58 time=21.8 ms
64 bytes from waw02s13-in-f3.1e100.net (172.217.16.3): icmp_seq=2 ttl=58 time=39.3 ms
64 bytes from waw02s13-in-f3.1e100.net (172.217.16.3): icmp_seq=3 ttl=58 time=39.5 ms
64 bytes from waw02s13-in-f3.1e100.net (172.217.16.3): icmp_seq=4 ttl=58 time=34.0 ms
64 bytes from waw02s13-in-f3.1e100.net (172.217.16.3): icmp_seq=5 ttl=58 time=52.6 ms
64 bytes from waw02s13-in-f3.1e100.net (172.217.16.3): icmp_seq=6 ttl=58 time=27.2 ms
64 bytes from waw02s13-in-f3.1e100.net (172.217.16.3): icmp_seq=7 ttl=58 time=23.3 ms
64 bytes from waw02s13-in-f3.1e100.net (172.217.16.3): icmp_seq=8 ttl=58 time=243 ms
^C
--- www.google.pl ping statistics ---
8 packets transmitted, 8 received, 0% packet loss, time 7010ms
rtt min/avg/max/mdev = 21.853/60.185/243.495/69.926 ms
Dodano po pewnym czasie:
Jeszcze raz wklejam całość po haśle co było w pobranych:
Kod: ########## wireless info START ##########
Report from: 05 Apr 2020 16:21 CEST +0200
Booted last: 05 Apr 2020 00:00 CEST +0200
Script from: 22 Oct 2018 03:34 UTC +0000
##### release ###########################
Distributor ID: LinuxMint
Description: Linux Mint 19.3 Tricia
Release: 19.3
Codename: tricia
##### kernel ############################
Linux 5.3.0-45-generic #37~18.04.1-Ubuntu SMP Fri Mar 27 15:58:10 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
Parameters: ro, quiet, splash, vt.handoff=1
##### desktop ###########################
Cinnamon
##### lspci #############################
05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)
Subsystem: Gigabyte Technology Co., Ltd Onboard Ethernet [1458:e000]
Kernel driver in use: r8169
##### lsusb #############################
Bus 003 Device 002: ID 04a9:221c Canon, Inc. CanoScan LiDE 60
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 002: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for Bluetooth
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 0c45:62c0 Microdia Sonix USB 2.0 Camera
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 2357:0108
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
##### PCMCIA card info ##################
##### rfkill ############################
1: phy1: Wireless LAN
Soft blocked: no
Hard blocked: no
##### secure boot #######################
'mokutil' is not installed (package "mokutil").
##### lsmod #############################
rtl8xxxu 126976 0
mac80211 847872 1 rtl8xxxu
cfg80211 704512 1 mac80211
libarc4 16384 1 mac80211
wmi_bmof 16384 0
wmi 32768 1 wmi_bmof
##### interfaces ########################
[/etc/network/interfaces]
auto lo
iface lo inet loopback
##### ifconfig ##########################
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback <MAC address> brd <MAC address>
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp5s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel state DOWN group default qlen 1000
link/ether <MAC 'enp5s0' [IF1]> brd <MAC address>
4: wlx<IF from MAC [IF2]>: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether <MAC 'wlx<IF from MAC [IF2]>' [IF2]> brd <MAC address>
inet 192.168.202.108/24 brd 192.168.202.255 scope global dynamic noprefixroute wlx<IF from MAC [IF2]>
valid_lft 28456sec preferred_lft 28456sec
inet6 fe80::9f3:ce96:f7ad:bc4a/64 scope link noprefixroute
valid_lft forever preferred_lft forever
##### iwconfig ##########################
lo no wireless extensions.
enp5s0 no wireless extensions.
wlx<IF from MAC [IF2]> IEEE 802.11 ESSID:"Tedy"
Mode:Managed Frequency:2.422 GHz Access Point: <MAC 'Tedy' [AC1]>
Bit Rate=1 Mb/s Tx-Power=20 dBm
Retry short limit:7 RTS thr=2347 B Fragment thr:off
Power Management:off
Link Quality=26/70 Signal level=-84 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:266 Missed beacon:0
##### route #############################
default via 192.168.202.1 dev wlx<IF from MAC [IF2]> proto dhcp metric 600
169.254.0.0/16 dev wlx<IF from MAC [IF2]> scope link metric 1000
192.168.202.0/24 dev wlx<IF from MAC [IF2]> proto kernel scope link src 192.168.202.108 metric 600
##### resolv.conf #######################
[777 root '/etc/resolv.conf' -> '../run/systemd/resolve/stub-resolv.conf']
nameserver 127.0.0.53
options edns0
##### network managers ##################
Installed:
NetworkManager
Running:
root 811 1 0 12:13 ? 00:00:08 /usr/sbin/NetworkManager --no-daemon
##### NetworkManager info ###############
GENERAL.DEVICE: wlx<IF from MAC [IF2]>
GENERAL.TYPE: wifi
GENERAL.NM-TYPE: NMDeviceWifi
GENERAL.VENDOR: Realtek
GENERAL.PRODUCT: 802.11n NIC
GENERAL.DRIVER: rtl8xxxu
GENERAL.DRIVER-VERSION: 5.3.0-45-generic
GENERAL.FIRMWARE-VERSION: N/A
GENERAL.HWADDR: <MAC 'wlx<IF from MAC [IF2]>' [IF2]>
GENERAL.MTU: 1500
GENERAL.STATE: 100 (connected)
GENERAL.REASON: 0 (No reason given)
GENERAL.UDI: /sys/devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2:1.0/net/wlx<IF from MAC [IF2]>
GENERAL.IP-IFACE: wlx<IF from MAC [IF2]>
GENERAL.IS-SOFTWARE: no
GENERAL.NM-MANAGED: yes
GENERAL.AUTOCONNECT: yes
GENERAL.FIRMWARE-MISSING: no
GENERAL.NM-PLUGIN-MISSING: no
GENERAL.PHYS-PORT-ID: --
GENERAL.CONNECTION: Automatyczne Tedy
GENERAL.CON-UUID: a9c88a89-2be2-4809-915a-a953bf9d9277
GENERAL.CON-PATH: /org/freedesktop/NetworkManager/ActiveConnection/8
GENERAL.METERED: no (guessed)
CAPABILITIES.CARRIER-DETECT: no
CAPABILITIES.SPEED: 1 Mb/s
CAPABILITIES.IS-SOFTWARE: no
CAPABILITIES.SRIOV: no
WIFI-PROPERTIES.WEP: yes
WIFI-PROPERTIES.WPA: yes
WIFI-PROPERTIES.WPA2: yes
WIFI-PROPERTIES.TKIP: yes
WIFI-PROPERTIES.CCMP: yes
WIFI-PROPERTIES.AP: no
WIFI-PROPERTIES.ADHOC: no
WIFI-PROPERTIES.2GHZ: yes
WIFI-PROPERTIES.5GHZ: no
IP4.ADDRESS[1]: 192.168.202.108/24
IP4.GATEWAY: 192.168.202.1
IP4.ROUTE[1]: dst = 0.0.0.0/0, nh = 192.168.202.1, mt = 600
IP4.ROUTE[2]: dst = 192.168.202.0/24, nh = 0.0.0.0, mt = 600
IP4.ROUTE[3]: dst = 169.254.0.0/16, nh = 0.0.0.0, mt = 1000
IP4.DNS[1]: 192.168.202.1
DHCP4.OPTION[1]: requested_routers = 1
DHCP4.OPTION[2]: requested_domain_search = 1
DHCP4.OPTION[3]: requested_netbios_name_servers = 1
DHCP4.OPTION[4]: requested_host_name = 1
DHCP4.OPTION[5]: requested_time_offset = 1
DHCP4.OPTION[6]: requested_domain_name = 1
DHCP4.OPTION[7]: requested_rfc3442_classless_static_routes = 1
DHCP4.OPTION[8]: requested_broadcast_address = 1
DHCP4.OPTION[9]: requested_netbios_scope = 1
DHCP4.OPTION[10]: requested_wpad = 1
DHCP4.OPTION[11]: next_server = 192.168.202.1
DHCP4.OPTION[12]: broadcast_address = 192.168.202.255
DHCP4.OPTION[13]: requested_interface_mtu = 1
DHCP4.OPTION[14]: requested_subnet_mask = 1
DHCP4.OPTION[15]: routers = 192.168.202.1
DHCP4.OPTION[16]: ip_address = 192.168.202.108
DHCP4.OPTION[17]: subnet_mask = 255.255.255.0
DHCP4.OPTION[18]: requested_domain_name_servers = 1
DHCP4.OPTION[19]: requested_static_routes = 1
DHCP4.OPTION[20]: requested_ntp_servers = 1
DHCP4.OPTION[21]: expiry = 1586124956
DHCP4.OPTION[22]: dhcp_lease_time = 43200
DHCP4.OPTION[23]: requested_ms_classless_static_routes = 1
DHCP4.OPTION[24]: ntp_servers = 89.39.108.254
DHCP4.OPTION[25]: dhcp_message_type = 5
DHCP4.OPTION[26]: network_number = 192.168.202.0
DHCP4.OPTION[27]: dhcp_server_identifier = 192.168.202.1
DHCP4.OPTION[28]: domain_name_servers = 192.168.202.1
IP6.ADDRESS[1]: fe80::9f3:ce96:f7ad:bc4a/64
IP6.GATEWAY: --
IP6.ROUTE[1]: dst = ff00::/8, nh = ::, mt = 256, table=255
IP6.ROUTE[2]: dst = fe80::/64, nh = ::, mt = 256
IP6.ROUTE[3]: dst = fe80::/64, nh = ::, mt = 600
CONNECTIONS.AVAILABLE-CONNECTION-PATHS: /org/freedesktop/NetworkManager/Settings/{3,2,1,4}
CONNECTIONS.AVAILABLE-CONNECTIONS[1]: a9c88a89-2be2-4809-915a-a953bf9d9277 | Automatyczne Tedy
CONNECTIONS.AVAILABLE-CONNECTIONS[2]: 5af21d28-b6d4-4c2b-8b21-6259bf9520f8 | Automatyczne Apartament
CONNECTIONS.AVAILABLE-CONNECTIONS[3]: 37892e2d-03a8-433a-8849-ab21f6cb6964 | MikroTik_EXT
CONNECTIONS.AVAILABLE-CONNECTIONS[4]: 09b89967-0282-4375-9c03-807d56da2acb | Automatyczne GAWRA
GENERAL.DEVICE: enp5s0
GENERAL.TYPE: ethernet
GENERAL.NM-TYPE: NMDeviceEthernet
GENERAL.VENDOR: Realtek Semiconductor Co., Ltd.
GENERAL.PRODUCT: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (Onboard Ethernet)
GENERAL.DRIVER: r8169
GENERAL.DRIVER-VERSION: --
GENERAL.FIRMWARE-VERSION: --
GENERAL.HWADDR: <MAC 'enp5s0' [IF1]>
GENERAL.MTU: 1500
GENERAL.STATE: 20 (unavailable)
GENERAL.REASON: 2 (Device is now managed)
GENERAL.UDI: /sys/devices/pci0000:00/0000:00:15.1/0000:05:00.0/net/enp5s0
GENERAL.IP-IFACE: --
GENERAL.IS-SOFTWARE: no
GENERAL.NM-MANAGED: yes
GENERAL.AUTOCONNECT: yes
GENERAL.FIRMWARE-MISSING: no
GENERAL.NM-PLUGIN-MISSING: no
GENERAL.PHYS-PORT-ID: --
GENERAL.CONNECTION: --
GENERAL.CON-UUID: --
GENERAL.CON-PATH: --
GENERAL.METERED: unknown
CAPABILITIES.CARRIER-DETECT: yes
CAPABILITIES.SPEED: unknown
CAPABILITIES.IS-SOFTWARE: no
CAPABILITIES.SRIOV: no
WIRED-PROPERTIES.CARRIER: off
CONNECTIONS.AVAILABLE-CONNECTION-PATHS: --
SSID BSSID MODE CHAN FREQ RATE SIGNAL BARS SECURITY ACTIVE IN-USE
Tedy <MAC 'Tedy' [AC1]> Infra 3 2422 MHz 130 Mbit/s 36 ▂▄__ WPA2 yes *
nowak <MAC 'nowak' [AC6]> Infra 1 2412 MHz 270 Mbit/s 0 ____ -- no
MikroTik_EXT <MAC 'MikroTik_EXT' [AC3]> Infra 1 2412 MHz 130 Mbit/s 0 ____ WPA1 WPA2 no
MikroTik <MAC 'MikroTik' [AN4]> Infra 1 2412 MHz 130 Mbit/s 0 ____ WPA2 no
Apartament <MAC 'Apartament' [AN5]> Infra 5 2432 MHz 270 Mbit/s 0 ____ WPA2 no
GAWRA <MAC 'GAWRA' [AC2]> Infra 5 2432 MHz 130 Mbit/s 0 ____ WPA2 no
Malinka <MAC 'Malinka' [AC4]> Infra 7 2442 MHz 270 Mbit/s 0 ____ WPA1 WPA2 no
SP3 <MAC 'SP3' [AN8]> Infra 9 2452 MHz 270 Mbit/s 0 ____ WPA2 no
Polineo_69 <MAC 'Polineo_69' [AC5]> Infra 10 2457 MHz 130 Mbit/s 0 ____ WPA1 WPA2 no
##### NetworkManager.state ##############
[main]
NetworkingEnabled=true
WirelessEnabled=true
WWANEnabled=true
##### NetworkManager config #############
[[/etc/NetworkManager/conf.d/default-wifi-powersave-on.conf]]
[connection]
wifi.powersave = 3
[[/etc/NetworkManager/NetworkManager.conf]]
[main]
plugins=ifupdown,keyfile
[ifupdown]
managed=false
[device]
wifi.scan-rand-mac-address=no
[[/usr/lib/NetworkManager/conf.d/10-dns-resolved.conf]]
[main]
dns=systemd-resolved
[[/usr/lib/NetworkManager/conf.d/10-globally-managed-devices.conf]]
[keyfile]
unmanaged-devices=*,except:type:wifi,except:type:wwan
[[/usr/lib/NetworkManager/conf.d/20-connectivity-ubuntu.conf]]
[connectivity]
uri=http://connectivity-check.ubuntu.com/
[[/usr/lib/NetworkManager/conf.d/no-mac-addr-change.conf]]
[device-mac-addr-change-wifi]
match-device=driver:rtl8723bs,driver:rtl8189es,driver:r8188eu,driver:8188eu,driver:eagle_sdio,driver:wl
wifi.scan-rand-mac-address=no
wifi.cloned-mac-address=preserve
ethernet.cloned-mac-address=preserve
##### NetworkManager profiles ###########
[[/etc/NetworkManager/system-connections/Automatyczne Tedy]] (600 root)
[connection] id=Automatyczne Tedy | type=wifi | permissions=
[wifi] mac-address=<MAC 'wlx<IF from MAC [IF2]>' [IF2]> | mac-address-blacklist= | ssid=Tedy
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/MikroTik_EXT]] (600 root)
[connection] id=MikroTik_EXT | type=wifi | permissions=
[wifi] mac-address=<MAC 'wlx<IF from MAC [IF2]>' [IF2]> | mac-address-blacklist= | ssid=MikroTik_EXT
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/Automatyczne Apartament]] (600 root)
[connection] id=Automatyczne Apartament | type=wifi | permissions=
[wifi] mac-address=<MAC 'wlx<IF from MAC [IF2]>' [IF2]> | mac-address-blacklist= | ssid=Apartament
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/Automatyczne GAWRA]] (600 root)
[connection] id=Automatyczne GAWRA | type=wifi | permissions=
[wifi] mac-address=<MAC 'wlx<IF from MAC [IF2]>' [IF2]> | mac-address-blacklist= | ssid=GAWRA
[ipv4] method=auto
[ipv6] method=auto
##### Netplan config ####################
[/etc/netplan/1-network-manager-all.yaml]
network:
version: 2
renderer: NetworkManager
##### iw reg get ########################
Region: Europe/Warsaw (based on set time zone)
global
country 00: DFS-UNSET
(2402 - 2472 @ 40), (N/A, 20), (N/A)
(2457 - 2482 @ 20), (N/A, 20), (N/A), AUTO-BW, PASSIVE-SCAN
(2474 - 2494 @ 20), (N/A, 20), (N/A), NO-OFDM, PASSIVE-SCAN
(5170 - 5250 @ 80), (N/A, 20), (N/A), AUTO-BW, PASSIVE-SCAN
(5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS, AUTO-BW, PASSIVE-SCAN
(5490 - 5730 @ 160), (N/A, 20), (0 ms), DFS, PASSIVE-SCAN
(5735 - 5835 @ 80), (N/A, 20), (N/A), PASSIVE-SCAN
(57240 - 63720 @ 2160), (N/A, 0), (N/A)
##### iwlist channels ###################
lo no frequency information.
enp5s0 no frequency information.
wlx<IF from MAC [IF2]> 14 channels in total; available frequencies :
Channel 01 : 2.412 GHz
Channel 02 : 2.417 GHz
Channel 03 : 2.422 GHz
Channel 04 : 2.427 GHz
Channel 05 : 2.432 GHz
Channel 06 : 2.437 GHz
Channel 07 : 2.442 GHz
Channel 08 : 2.447 GHz
Channel 09 : 2.452 GHz
Channel 10 : 2.457 GHz
Channel 11 : 2.462 GHz
Channel 12 : 2.467 GHz
Channel 13 : 2.472 GHz
Channel 14 : 2.484 GHz
Current Frequency:2.422 GHz (Channel 3)
##### iwlist scan #######################
lo Interface doesn't support scanning.
enp5s0 Interface doesn't support scanning.
Channel occupancy:
2 APs on Frequency:2.412 GHz (Channel 1)
1 APs on Frequency:2.422 GHz (Channel 3)
1 APs on Frequency:2.432 GHz (Channel 5)
1 APs on Frequency:2.442 GHz (Channel 7)
1 APs on Frequency:2.457 GHz (Channel 10)
wlx<IF from MAC [IF2]> Scan completed :
Cell 01 - Address: <MAC 'Tedy' [AC1]>
Channel:3
Frequency:2.422 GHz (Channel 3)
Quality=26/70 Signal level=-84 dBm
Encryption key:on
ESSID:"Tedy"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
9 Mb/s; 12 Mb/s; 18 Mb/s
Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
Mode:Master
Extra:tsf=0000019791b60e37
Extra: Last beacon: 80ms ago
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : PSK
Cell 02 - Address: <MAC 'GAWRA' [AC2]>
Channel:5
Frequency:2.432 GHz (Channel 5)
Quality=4/70 Signal level=-106 dBm
Encryption key:on
ESSID:"GAWRA"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
9 Mb/s; 12 Mb/s; 18 Mb/s
Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
Mode:Master
Extra:tsf=000001978d75a1e6
Extra: Last beacon: 1652ms ago
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : PSK
Cell 03 - Address: <MAC 'MikroTik_EXT' [AC3]>
Channel:1
Frequency:2.412 GHz (Channel 1)
Quality=2/70 Signal level=-108 dBm
Encryption key:on
ESSID:"MikroTik_EXT"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 9 Mb/s
18 Mb/s; 36 Mb/s; 54 Mb/s
Bit Rates:6 Mb/s; 12 Mb/s; 24 Mb/s; 48 Mb/s
Mode:Master
Extra:tsf=0000011dba27a905
Extra: Last beacon: 2496ms ago
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : TKIP CCMP
Authentication Suites (1) : PSK
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : TKIP CCMP
Authentication Suites (1) : PSK
Cell 04 - Address: <MAC 'Malinka' [AC4]>
Channel:7
Frequency:2.442 GHz (Channel 7)
Quality=2/70 Signal level=-108 dBm
Encryption key:on
ESSID:"Malinka"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 9 Mb/s
18 Mb/s; 36 Mb/s; 54 Mb/s
Bit Rates:6 Mb/s; 12 Mb/s; 24 Mb/s; 48 Mb/s
Mode:Master
Extra:tsf=00000194d47341c3
Extra: Last beacon: 23020ms ago
IE: WPA Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : PSK
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : PSK
Cell 05 - Address: <MAC 'Polineo_69' [AC5]>
Channel:10
Frequency:2.457 GHz (Channel 10)
Quality=2/70 Signal level=-108 dBm
Encryption key:on
ESSID:"Polineo_69"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 9 Mb/s
18 Mb/s; 36 Mb/s; 54 Mb/s
Bit Rates:6 Mb/s; 12 Mb/s; 24 Mb/s; 48 Mb/s
Mode:Master
Extra:tsf=000000045c08b19a
Extra: Last beacon: 21832ms ago
IE: WPA Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : PSK
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : PSK
Cell 06 - Address: <MAC 'nowak' [AC6]>
Channel:1
Frequency:2.412 GHz (Channel 1)
Quality=2/70 Signal level=-108 dBm
Encryption key:off
ESSID:"nowak"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
9 Mb/s; 12 Mb/s; 18 Mb/s
Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
Mode:Master
Extra:tsf=0000012ee71d34b4
Extra: Last beacon: 84ms ago
##### module infos ######################
[rtl8xxxu]
filename: /lib/modules/5.3.0-45-generic/kernel/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.ko
firmware: rtlwifi/rtl8723bu_bt.bin
firmware: rtlwifi/rtl8723bu_nic.bin
firmware: rtlwifi/rtl8192eu_nic.bin
firmware: rtlwifi/rtl8192cufw_TMSC.bin
firmware: rtlwifi/rtl8192cufw_B.bin
firmware: rtlwifi/rtl8192cufw_A.bin
firmware: rtlwifi/rtl8723aufw_B_NoBT.bin
firmware: rtlwifi/rtl8723aufw_B.bin
firmware: rtlwifi/rtl8723aufw_A.bin
license: GPL
description: RTL8XXXu USB mac80211 Wireless LAN Driver
author: Jes Sorensen <[email protected]>
srcversion: EC72D149C3734C87BE8CDDA
depends: mac80211
retpoline: Y
intree: Y
name: rtl8xxxu
vermagic: 5.3.0-45-generic SMP mod_unload
signat: PKCS#7
signer:
sig_key:
sig_hashalgo: md4
parm: debug:Set debug mask (int)
parm: ht40_2g:Enable HT40 support on the 2.4GHz band (bool)
parm: dma_aggregation:Enable DMA packet aggregation (bool)
parm: dma_agg_timeout:Set DMA aggregation timeout (range 1-127) (int)
parm: dma_agg_pages:Set DMA aggregation pages (range 1-127, 0 to disable) (int)
[mac80211]
filename: /lib/modules/5.3.0-45-generic/kernel/net/mac80211/mac80211.ko
license: GPL
description: IEEE 802.11 subsystem
srcversion: 04B73AA55C32D6E1EAAB970
depends: cfg80211,libarc4
retpoline: Y
intree: Y
name: mac80211
vermagic: 5.3.0-45-generic SMP mod_unload
signat: PKCS#7
signer:
sig_key:
sig_hashalgo: md4
parm: minstrel_vht_only:Use only VHT rates when VHT is supported by sta. (bool)
parm: max_nullfunc_tries:Maximum nullfunc tx tries before disconnecting (reason 4). (int)
parm: max_probe_tries:Maximum probe tries before disconnecting (reason 4). (int)
parm: beacon_loss_count:Number of beacon intervals before we decide beacon was lost. (int)
parm: probe_wait_ms:Maximum time(ms) to wait for probe response before disconnecting (reason 4). (int)
parm: ieee80211_default_rc_algo:Default rate control algorithm for mac80211 to use (charp)
[cfg80211]
filename: /lib/modules/5.3.0-45-generic/kernel/net/wireless/cfg80211.ko
description: wireless configuration support
license: GPL
author: Johannes Berg
srcversion: D71D4FE4F5DB20DF362D2C5
depends:
retpoline: Y
intree: Y
name: cfg80211
vermagic: 5.3.0-45-generic SMP mod_unload
signat: PKCS#7
signer:
sig_key:
sig_hashalgo: md4
parm: bss_entries_limit:limit to number of scan BSS entries (per wiphy, default 1000) (int)
parm: ieee80211_regdom:IEEE 802.11 regulatory domain code (charp)
parm: cfg80211_disable_40mhz_24ghz:Disable 40MHz support in the 2.4GHz band (bool)
##### module parameters #################
grep: /sys/module/rtl8xxxu/parameters/debug: Permission denied
grep: /sys/module/rtl8xxxu/parameters/dma_agg_pages: Permission denied
grep: /sys/module/rtl8xxxu/parameters/dma_aggregation: Permission denied
grep: /sys/module/rtl8xxxu/parameters/dma_agg_timeout: Permission denied
grep: /sys/module/rtl8xxxu/parameters/ht40_2g: Permission denied
[rtl8xxxu]
[mac80211]
beacon_loss_count: 7
ieee80211_default_rc_algo: minstrel_ht
max_nullfunc_tries: 2
max_probe_tries: 5
minstrel_vht_only: Y
probe_wait_ms: 500
[cfg80211]
bss_entries_limit: 1000
cfg80211_disable_40mhz_24ghz: N
ieee80211_regdom: 00
##### /etc/modules ######################
##### modprobe options ##################
[/etc/modprobe.d/amd64-microcode-blacklist.conf]
blacklist microcode
[/etc/modprobe.d/blacklist-ath_pci.conf]
blacklist ath_pci
[/etc/modprobe.d/blacklist.conf]
blacklist evbug
blacklist usbmouse
blacklist usbkbd
blacklist eepro100
blacklist de4x5
blacklist eth1394
blacklist snd_intel8x0m
blacklist snd_aw2
blacklist i2c_i801
blacklist prism54
blacklist bcm43xx
blacklist garmin_gps
blacklist asus_acpi
blacklist snd_pcsp
blacklist pcspkr
blacklist amd76x_edac
[/etc/modprobe.d/blacklist-rare-network.conf]
alias net-pf-3 off
alias net-pf-6 off
alias net-pf-9 off
alias net-pf-11 off
alias net-pf-12 off
alias net-pf-19 off
alias net-pf-21 off
alias net-pf-36 off
[/etc/modprobe.d/intel-microcode-blacklist.conf]
blacklist microcode
[/etc/modprobe.d/iwlwifi.conf]
remove iwlwifi \
(/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod) \
&& /sbin/modprobe -r mac80211
##### rc.local ##########################
grep: /etc/rc.local: No such file or directory
##### pm-utils ##########################
##### udev rules ########################
##### dmesg #############################
[ 160.930669] wlx<IF from MAC [IF2]>: send auth to <MAC 'Tedy' [AC1]> (try 3/3)
[ 161.134666] wlx<IF from MAC [IF2]>: authentication with <MAC 'Tedy' [AC1]> timed out
[ 171.322505] wlx<IF from MAC [IF2]>: authenticate with <MAC 'Tedy' [AC1]>
[ 171.334245] wlx<IF from MAC [IF2]>: send auth to <MAC 'Tedy' [AC1]> (try 1/3)
[ 171.534649] wlx<IF from MAC [IF2]>: send auth to <MAC 'Tedy' [AC1]> (try 2/3)
[ 171.738674] wlx<IF from MAC [IF2]>: send auth to <MAC 'Tedy' [AC1]> (try 3/3)
[ 171.942665] wlx<IF from MAC [IF2]>: authentication with <MAC 'Tedy' [AC1]> timed out
[ 174.069796] usb 1-2: rtl8192eu_active_to_emu: Disabling MAC timed out
[ 178.419829] usb 1-2: rtl8192eu_parse_efuse: dumping efuse (0x200 bytes):
[ 178.420053] usb 1-2: rtl8xxxu: Loading firmware rtlwifi/rtl8192eu_nic.bin
[ 179.541569] rtl8xxxu 1-2:1.0 wlx<IF from MAC [IF2]>: renamed from wlan0
[ 180.822047] wlx<IF from MAC [IF2]>: authenticate with <MAC 'Tedy' [AC1]>
[ 180.833890] wlx<IF from MAC [IF2]>: send auth to <MAC 'Tedy' [AC1]> (try 1/3)
[ 180.837510] wlx<IF from MAC [IF2]>: authenticated
[ 180.838659] wlx<IF from MAC [IF2]>: associate with <MAC 'Tedy' [AC1]> (try 1/3)
[ 180.842257] wlx<IF from MAC [IF2]>: RX AssocResp from <MAC 'Tedy' [AC1]> (capab=0x431 status=0 aid=1)
[ 180.843989] usb 1-2: rtl8xxxu_bss_info_changed: HT supported
[ 180.845632] wlx<IF from MAC [IF2]>: associated
[ 180.912664] IPv6: ADDRCONF(NETDEV_CHANGE): wlx<IF from MAC [IF2]>: link becomes ready
########## wireless info END ############
|
