0
Nie wiem z czego to wynika. Chcę się dowiedzieć, czy to wina najnowszego jądra. Jeśli tak to powrócę do poprzedniego.
Chciałem zainstalować firefox, libreoffice i operę. Pod koniec pojawiły się jakieś błędy.
Gdzieś coś znalazłem jakąś komendę. Nie mam pojęcia co to jest.
No i błąd się powtarza.
Przy okazji użyłem komendy dmesg już przy jądrze 5.4.0-47
Jedyne błędy jakie zauważyłem i ciągle mi się pojawiają przy ładowaniu systemu to:
A tamte aktualizacje programów pozostają, czy tylko jądro zmienia?
Chciałem zainstalować firefox, libreoffice i operę. Pod koniec pojawiły się jakieś błędy.
Kod:
Przetwarzanie wyzwalaczy pakietu initramfs-tools (0.136ubuntu6.3)...
update-initramfs: Generating /boot/initrd.img-5.4.0-48-generic
I: The initramfs will attempt to resume from /dev/sda7
I: (UUID=c3f0b4a6-f9d0-45b1-a0bd-6c962029924c)
I: Set the RESUME variable to override this.
Error 24 : Write error : cannot write compressed block
E: mkinitramfs failure cpio 141 lz4 -9 -l 24
update-initramfs: failed for /boot/initrd.img-5.4.0-48-generic with 1.
dpkg: błąd przetwarzania pakietu initramfs-tools (--configure):
podproces zainstalowany pakiet initramfs-tools skrypt post-installation zwrócił kod błędu 1
Wystąpiły błędy podczas przetwarzania:
initramfs-tools
E: Sub-process /usr/bin/dpkg returned an error code (1)
Nie udało się zainstalować pakietu. Próba powrócenia do poprzedniego stanu:
Konfigurowanie pakietu initramfs-tools (0.136ubuntu6.3) ...
update-initramfs: deferring update (trigger activated)
Przetwarzanie wyzwalaczy pakietu initramfs-tools (0.136ubuntu6.3)...
update-initramfs: Generating /boot/initrd.img-5.4.0-48-generic
I: The initramfs will attempt to resume from /dev/sda7
I: (UUID=c3f0b4a6-f9d0-45b1-a0bd-6c962029924c)
I: Set the RESUME variable to override this.
Error 24 : Write error : cannot write compressed block
cpio: błąd zapisu: Przerwany potok
sort: write failed: 'standard output': Broken pipe
sort: write error
E: mkinitramfs failure cpio 2 lz4 -9 -l 24
update-initramfs: failed for /boot/initrd.img-5.4.0-48-generic with 1.
dpkg: błąd przetwarzania pakietu initramfs-tools (--configure):
podproces zainstalowany pakiet initramfs-tools skrypt post-installation zwrócił kod błędu 1
Wystąpiły błędy podczas przetwarzania:
initramfs-tools
Gdzieś coś znalazłem jakąś komendę. Nie mam pojęcia co to jest.
Kod:
sudo update-initramfs -u
[sudo] hasło użytkownika bazy:
update-initramfs: Generating /boot/initrd.img-5.4.0-48-generic
I: The initramfs will attempt to resume from /dev/sda7
I: (UUID=c3f0b4a6-f9d0-45b1-a0bd-6c962029924c)
I: Set the RESUME variable to override this.
Error 24 : Write error : cannot write compressed block
E: mkinitramfs failure cpio 141 lz4 -9 -l 24
update-initramfs: failed for /boot/initrd.img-5.4.0-48-generic with 1.
No i błąd się powtarza.
Przy okazji użyłem komendy dmesg już przy jądrze 5.4.0-47
Kod:
9 AMI. 00000004)
[ 0.000000] ACPI: ASF! 0x00000000CAC1BF20 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: SSDT 0x00000000CAC1BFC0 005270 (v01 COMPAQ WMI 00000001 MSFT 03000001)
[ 0.000000] ACPI: SLIC 0x00000000CAC21230 000176 (v01 HPQOEM SLIC-BPC 00000001 00000000)
[ 0.000000] ACPI: TCPA 0x00000000CAC213A8 000032 (v02 APTIO4 NAPAASF 00000001 MSFT 01000013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022e5fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x22e5d3000-0x22e5fdfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000022e5fffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009afff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.000000] node 0: [mem 0x0000000020200000-0x000000003fffffff]
[ 0.000000] node 0: [mem 0x0000000040200000-0x00000000cabcafff]
[ 0.000000] node 0: [mem 0x00000000cad70000-0x00000000caffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000022e5fffff]
[ 0.000000] Zeroed struct page in unavailable ranges: 28683 pages
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000022e5fffff]
[ 0.000000] On node 0 totalpages: 2068469
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 154 pages reserved
[ 0.000000] DMA zone: 3994 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12906 pages used for memmap
[ 0.000000] DMA32 zone: 825947 pages, LIFO batch:63
[ 0.000000] Normal zone: 19352 pages used for memmap
[ 0.000000] Normal zone: 1238528 pages, LIFO batch:63
[ 0.000000] Reserving Intel graphics memory at [mem 0xcba00000-0xcf9fffff]
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] TSC deadline timer available
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009b000-0x0009bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcabcb000-0xcac13fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcac14000-0xcac21fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcac22000-0xcac22fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcac23000-0xcac50fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcac51000-0xcac72fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcac73000-0xcacf9fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcacfa000-0xcacfafff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcacfb000-0xcad0cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcad0d000-0xcad1afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcad1b000-0xcad2cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcad2d000-0xcad6ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xcb7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcb800000-0xcf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfa00000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] [mem 0xcfa00000-0xfed1bfff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288
[ 0.000000] pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2035993
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-5.4.0-47-generic root=UUID=3198d758-aa27-452c-acbf-3eabb4e37a08 ro quiet splash
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7945520K/8273876K available (14339K kernel code, 2398K rwdata, 4956K rodata, 2716K init, 4988K bss, 328356K reserved, 0K cma-reserved)
[ 0.000000] random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 44505 entries in 174 pages
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] printk: console [tty0] enabled
[ 0.000000] ACPI: Core revision 20190816
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.024000] tsc: PIT calibration matches HPET. 1 loops
[ 0.024000] tsc: Detected 3093.675 MHz processor
[ 0.000003] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c97f0d3bf6, max_idle_ns: 440795317314 ns
[ 0.000006] Calibrating delay loop (skipped), value calculated using timer frequency.. 6187.35 BogoMIPS (lpj=12374700)
[ 0.000007] pid_max: default: 32768 minimum: 301
[ 0.000032] LSM: Security Framework initializing
[ 0.000041] Yama: becoming mindful.
[ 0.000069] AppArmor: AppArmor initialized
[ 0.000117] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.000136] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.000149] *** VALIDATE tmpfs ***
[ 0.000281] *** VALIDATE proc ***
[ 0.000328] *** VALIDATE cgroup1 ***
[ 0.000330] *** VALIDATE cgroup2 ***
[ 0.000376] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.000386] process: using mwait in idle threads
[ 0.000388] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.000389] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.000391] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.000392] Spectre V2 : Mitigation: Full generic retpoline
[ 0.000393] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.000393] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.000394] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.000395] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.000398] MDS: Mitigation: Clear CPU buffers
[ 0.000530] Freeing SMP alternatives memory: 40K
[ 0.004550] smpboot: CPU0: Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[ 0.004631] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.004638] ... version: 3
[ 0.004638] ... bit width: 48
[ 0.004639] ... generic registers: 8
[ 0.004639] ... value mask: 0000ffffffffffff
[ 0.004640] ... max period: 00007fffffffffff
[ 0.004640] ... fixed-purpose events: 3
[ 0.004641] ... event mask: 00000007000000ff
[ 0.004673] rcu: Hierarchical SRCU implementation.
[ 0.005379] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.005427] smp: Bringing up secondary CPUs ...
[ 0.005512] x86: Booting SMP configuration:
[ 0.005513] .... node #0, CPUs: #1 #2 #3
[ 0.012065] smp: Brought up 1 node, 4 CPUs
[ 0.012065] smpboot: Max logical packages: 1
[ 0.012065] smpboot: Total of 4 processors activated (24749.40 BogoMIPS)
[ 0.014454] devtmpfs: initialized
[ 0.014454] x86/mm: Memory block size: 128MB
[ 0.014454] PM: Registering ACPI NVS region [mem 0xcabcb000-0xcac13fff] (299008 bytes)
[ 0.014454] PM: Registering ACPI NVS region [mem 0xcac22000-0xcac22fff] (4096 bytes)
[ 0.014454] PM: Registering ACPI NVS region [mem 0xcac51000-0xcac72fff] (139264 bytes)
[ 0.014454] PM: Registering ACPI NVS region [mem 0xcacfa000-0xcacfafff] (4096 bytes)
[ 0.014454] PM: Registering ACPI NVS region [mem 0xcad0d000-0xcad1afff] (57344 bytes)
[ 0.014454] PM: Registering ACPI NVS region [mem 0xcad2d000-0xcad6ffff] (274432 bytes)
[ 0.014454] reboot: HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
[ 0.014454] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.014454] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.014454] pinctrl core: initialized pinctrl subsystem
[ 0.014454] PM: RTC time: 02:00:44, date: 2020-09-24
[ 0.016032] NET: Registered protocol family 16
[ 0.016104] audit: initializing netlink subsys (disabled)
[ 0.016109] audit: type=2000 audit(1600912844.040:1): state=initialized audit_enabled=0 res=1
[ 0.016109] EISA bus registered
[ 0.016110] cpuidle: using governor ladder
[ 0.016112] cpuidle: using governor menu
[ 0.016112] ACPI: bus type PCI registered
[ 0.016112] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.016112] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.016112] PCI: not using MMCONFIG
[ 0.016112] PCI: Using configuration type 1 for base access
[ 0.016159] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[ 0.016410] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.017337] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.017337] ipmi:dmi: Base address is zero, assuming no IPMI interface
[ 0.017337] fbcon: Taking over console
[ 0.017337] ACPI: Added _OSI(Module Device)
[ 0.017337] ACPI: Added _OSI(Processor Device)
[ 0.017337] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.017337] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.017337] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.017337] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.017337] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.024674] ACPI: 3 ACPI AML tables successfully acquired and loaded
[ 0.025806] ACPI: Dynamic OEM Table Load:
[ 0.025811] ACPI: SSDT 0xFFFF982E64B32800 00038C (v01 AMI IST 00000001 MSFT 03000001)
[ 0.026341] ACPI: Dynamic OEM Table Load:
[ 0.026344] ACPI: SSDT 0xFFFF982E64995240 000084 (v01 AMI CST 00000001 MSFT 03000001)
[ 0.027543] ACPI: Interpreter enabled
[ 0.027558] ACPI: (supports S0 S3 S4 S5)
[ 0.027559] ACPI: Using IOAPIC for interrupt routing
[ 0.027587] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.027670] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.027682] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.027936] ACPI: Enabled 7 GPEs in block 00 to 3F
[ 0.028165] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.035291] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.035296] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.035483] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
[ 0.035657] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.036068] PCI host bridge to bus 0000:00
[ 0.036070] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.036071] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.036071] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.036072] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.036073] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.036074] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.036075] pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xffffffff window]
[ 0.036077] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.036084] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[ 0.036178] pci 0000:00:02.0: [8086:0102] type 00 class 0x030000
[ 0.036186] pci 0000:00:02.0: reg 0x10: [mem 0xfe000000-0xfe3fffff 64bit]
[ 0.036191] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.036194] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.036311] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.036338] pci 0000:00:16.0: reg 0x10: [mem 0xfe42a000-0xfe42a00f 64bit]
[ 0.036416] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.036503] pci 0000:00:16.3: [8086:1c3d] type 00 class 0x070002
[ 0.036526] pci 0000:00:16.3: reg 0x10: [io 0xf0e0-0xf0e7]
[ 0.036536] pci 0000:00:16.3: reg 0x14: [mem 0xfe429000-0xfe429fff]
[ 0.036691] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.036713] pci 0000:00:19.0: reg 0x10: [mem 0xfe400000-0xfe41ffff]
[ 0.036722] pci 0000:00:19.0: reg 0x14: [mem 0xfe428000-0xfe428fff]
[ 0.036732] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f]
[ 0.036795] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.036892] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.036916] pci 0000:00:1a.0: reg 0x10: [mem 0xfe427000-0xfe4273ff]
[ 0.037002] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.037106] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.037130] pci 0000:00:1b.0: reg 0x10: [mem 0xfe420000-0xfe423fff 64bit]
[ 0.037208] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.037295] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.037506] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.037652] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[ 0.037862] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.038010] pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400
[ 0.038215] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.038366] pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
[ 0.038586] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 0.038730] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.038754] pci 0000:00:1d.0: reg 0x10: [mem 0xfe426000-0xfe4263ff]
[ 0.038840] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.038938] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.039088] pci 0000:00:1f.0: [8086:1c4e] type 00 class 0x060100
[ 0.039375] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[ 0.039396] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
[ 0.039404] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
[ 0.039413] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
[ 0.039421] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
[ 0.039430] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.039439] pci 0000:00:1f.2: reg 0x24: [mem 0xfe425000-0xfe4257ff]
[ 0.039483] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.039579] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.039599] pci 0000:00:1f.3: reg 0x10: [mem 0xfe424000-0xfe4240ff 64bit]
[ 0.039620] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.039801] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.039901] pci 0000:00:1c.4: PCI bridge to [bus 02]
[ 0.039994] pci 0000:00:1c.6: PCI bridge to [bus 03]
[ 0.040093] pci 0000:00:1c.7: PCI bridge to [bus 04]
[ 0.040136] pci_bus 0000:05: extended config space not accessible
[ 0.040185] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[ 0.040195] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode)
[ 0.040196] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
[ 0.040197] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode)
[ 0.040198] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.040199] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.040200] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[ 0.040201] pci 0000:00:1e.0: bridge window [mem 0xcfa00000-0xffffffff window] (subtractive decode)
[ 0.041021] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.041094] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.041168] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.041241] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.041317] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.041389] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[ 0.041462] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.041535] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.041655] iommu: Default domain type: Translated
[ 0.041655] SCSI subsystem initialized
[ 0.041655] libata version 3.00 loaded.
[ 0.041655] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.041655] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.041655] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.041655] vgaarb: loaded
[ 0.041655] ACPI: bus type USB registered
[ 0.041655] usbcore: registered new interface driver usbfs
[ 0.041655] usbcore: registered new interface driver hub
[ 0.041655] usbcore: registered new device driver usb
[ 0.041655] pps_core: LinuxPPS API ver. 1 registered
[ 0.041655] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 0.041655] PTP clock support registered
[ 0.041655] EDAC MC: Ver: 3.0.0
[ 0.041655] PCI: Using ACPI for IRQ routing
[ 0.048369] PCI: pci_cache_line_size set to 64 bytes
[ 0.048434] e820: reserve RAM buffer [mem 0x0009bc00-0x0009ffff]
[ 0.048436] e820: reserve RAM buffer [mem 0xcabcb000-0xcbffffff]
[ 0.048437] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]
[ 0.048438] e820: reserve RAM buffer [mem 0x22e600000-0x22fffffff]
[ 0.048526] NetLabel: Initializing
[ 0.048526] NetLabel: domain hash size = 128
[ 0.048527] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.048540] NetLabel: unlabeled traffic allowed by default
[ 0.048693] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.048696] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.050719] clocksource: Switched to clocksource tsc-early
[ 0.059573] *** VALIDATE bpf ***
[ 0.059679] VFS: Disk quotas dquot_6.6.0
[ 0.059696] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.059722] *** VALIDATE ramfs ***
[ 0.059725] *** VALIDATE hugetlbfs ***
[ 0.059800] AppArmor: AppArmor Filesystem Enabled
[ 0.059826] pnp: PnP ACPI init
[ 0.060018] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
[ 0.060020] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.060021] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.060022] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.060023] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.060029] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.060189] system 00:01: [io 0x0620-0x063f] has been reserved
[ 0.060190] system 00:01: [io 0x0610-0x061f] has been reserved
[ 0.060194] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.060240] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.060290] pnp 00:03: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.060312] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.060360] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.060364] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.060631] pnp 00:06: [dma 0 disabled]
[ 0.060710] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.060987] pnp 00:07: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[ 0.061205] system 00:08: [io 0x0400-0x0453] has been reserved
[ 0.061206] system 00:08: [io 0x0458-0x047f] has been reserved
[ 0.061208] system 00:08: [io 0x1180-0x119f] has been reserved
[ 0.061209] system 00:08: [io 0x0500-0x057f] has been reserved
[ 0.061210] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.061212] system 00:08: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 0.061213] system 00:08: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.061214] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 0.061218] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.061281] system 00:09: [io 0x0454-0x0457] has been reserved
[ 0.061285] system 00:09: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.061586] pnp: PnP ACPI: found 10 devices
[ 0.062740] thermal_sys: Registered thermal governor 'fair_share'
[ 0.062741] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.062742] thermal_sys: Registered thermal governor 'step_wise'
[ 0.062742] thermal_sys: Registered thermal governor 'user_space'
[ 0.062743] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.067263] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.067297] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.067324] pci 0000:00:1c.4: PCI bridge to [bus 02]
[ 0.067350] pci 0000:00:1c.6: PCI bridge to [bus 03]
[ 0.067374] pci 0000:00:1c.7: PCI bridge to [bus 04]
[ 0.067400] pci 0000:00:1e.0: PCI bridge to [bus 05]
[ 0.067412] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.067413] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.067414] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.067415] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.067416] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.067417] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.067418] pci_bus 0000:00: resource 10 [mem 0xcfa00000-0xffffffff window]
[ 0.067419] pci_bus 0000:05: resource 4 [io 0x0000-0x03af window]
[ 0.067420] pci_bus 0000:05: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.067421] pci_bus 0000:05: resource 6 [io 0x03b0-0x03df window]
[ 0.067422] pci_bus 0000:05: resource 7 [io 0x0d00-0xffff window]
[ 0.067423] pci_bus 0000:05: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.067424] pci_bus 0000:05: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.067425] pci_bus 0000:05: resource 10 [mem 0xcfa00000-0xffffffff window]
[ 0.067508] NET: Registered protocol family 2
[ 0.067665] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.067734] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.067916] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.068003] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.068047] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.068075] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.068122] NET: Registered protocol family 1
[ 0.068126] NET: Registered protocol family 44
[ 0.068139] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling
[ 0.068144] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.092118] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x662 took 23391 usecs
[ 0.116095] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x662 took 23379 usecs
[ 0.116118] PCI: CLS 64 bytes, default 64
[ 0.116159] Trying to unpack rootfs image as initramfs...
[ 0.327875] Freeing initrd memory: 84544K
[ 0.327944] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.327945] software IO TLB: mapped [mem 0xc6bcb000-0xcabcb000] (64MB)
[ 0.328168] check: Scanning for low memory corruption every 60 seconds
[ 0.328575] Initialise system trusted keyrings
[ 0.328584] Key type blacklist registered
[ 0.328606] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 0.329778] zbud: loaded
[ 0.330090] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.330216] fuse: init (API version 7.31)
[ 0.330230] *** VALIDATE fuse ***
[ 0.330231] *** VALIDATE fuse ***
[ 0.330312] Platform Keyring initialized
[ 0.333567] Key type asymmetric registered
[ 0.333568] Asymmetric key parser 'x509' registered
[ 0.333574] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 0.333609] io scheduler mq-deadline registered
[ 0.333935] pcieport 0000:00:1c.0: PME: Signaling with IRQ 24
[ 0.334219] pcieport 0000:00:1c.4: PME: Signaling with IRQ 25
[ 0.334487] pcieport 0000:00:1c.6: PME: Signaling with IRQ 26
[ 0.334752] pcieport 0000:00:1c.7: PME: Signaling with IRQ 27
[ 0.334876] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.334915] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 0.334916] vesafb: scrolling: redraw
[ 0.334917] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.334924] vesafb: framebuffer at 0xd0000000, mapped to 0x(____ptrval____), using 1216k, total 1216k
[ 0.335004] Console: switching to colour frame buffer device 80x30
[ 0.352359] fb0: VESA VGA frame buffer device
[ 0.352370] intel_idle: MWAIT substates: 0x1120
[ 0.352370] intel_idle: v0.4.1 model 0x2A
[ 0.352494] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.352575] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.352606] ACPI: Power Button [PWRB]
[ 0.352634] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.352655] ACPI: Power Button [PWRF]
[ 0.353607] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.374856] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.397082] 0000:00:16.3: ttyS4 at I/O 0xf0e0 (irq = 17, base_baud = 115200) is a 16550A
[ 0.397473] Linux agpgart interface v0.103
[ 0.416133] tpm_tis 00:07: 1.2 TPM (device-id 0xB, rev-id 16)
[ 0.508120] tpm tpm0: TPM is disabled/deactivated (0x7)
[ 0.534231] loop: module loaded
[ 0.534424] libphy: Fixed MDIO Bus: probed
[ 0.534425] tun: Universal TUN/TAP device driver, 1.6
[ 0.534465] PPP generic driver version 2.4.2
[ 0.534542] VFIO - User Level meta-driver version: 0.3
[ 0.534624] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.534626] ehci-pci: EHCI PCI platform driver
[ 0.534739] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.534747] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.534762] ehci-pci 0000:00:1a.0: debug port 2
[ 0.538673] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.538684] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfe427000
[ 0.552060] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.552120] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.552121] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.552122] usb usb1: Product: EHCI Host Controller
[ 0.552123] usb usb1: Manufacturer: Linux 5.4.0-47-generic ehci_hcd
[ 0.552124] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.552273] hub 1-0:1.0: USB hub found
[ 0.552281] hub 1-0:1.0: 3 ports detected
[ 0.552491] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.552495] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.552506] ehci-pci 0000:00:1d.0: debug port 2
[ 0.556429] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.556438] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfe426000
[ 0.572056] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.572102] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.572103] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.572104] usb usb2: Product: EHCI Host Controller
[ 0.572105] usb usb2: Manufacturer: Linux 5.4.0-47-generic ehci_hcd
[ 0.572106] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.572247] hub 2-0:1.0: USB hub found
[ 0.572254] hub 2-0:1.0: 3 ports detected
[ 0.572382] ehci-platform: EHCI generic platform driver
[ 0.572388] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.572392] ohci-pci: OHCI PCI platform driver
[ 0.572398] ohci-platform: OHCI generic platform driver
[ 0.572402] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.572459] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.575697] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.575702] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.575821] mousedev: PS/2 mouse device common for all mice
[ 0.575925] rtc_cmos 00:04: RTC can wake from S4
[ 0.576250] rtc_cmos 00:04: registered as rtc0
[ 0.576262] rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.576267] i2c /dev entries driver
[ 0.576302] device-mapper: uevent: version 1.0.3
[ 0.576380] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: [email protected]
[ 0.576395] platform eisa.0: Probing EISA bus 0
[ 0.576396] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 0.576397] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 0.576398] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 0.576399] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 0.576400] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 0.576401] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 0.576401] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 0.576402] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 0.576403] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 0.576404] platform eisa.0: EISA: Detected 0 cards
[ 0.576409] intel_pstate: Intel P-state driver initializing
[ 0.576761] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.576802] drop_monitor: Initializing network drop monitor service
[ 0.576949] NET: Registered protocol family 10
[ 0.582507] Segment Routing with IPv6
[ 0.582526] NET: Registered protocol family 17
[ 0.582638] Key type dns_resolver registered
[ 0.582973] RAS: Correctable Errors collector initialized.
[ 0.582999] microcode: sig=0x206a7, pf=0x2, revision=0x2f
[ 0.583089] microcode: Microcode Update Driver: v2.2.
[ 0.583093] IPI shorthand broadcast: enabled
[ 0.583110] sched_clock: Marking stable (607080888, -23995243)->(587385595, -4299950)
[ 0.583197] registered taskstats version 1
[ 0.583207] Loading compiled-in X.509 certificates
[ 0.583964] Loaded X.509 cert 'Build time autogenerated kernel key: 52d16be8a47f13ed569e4734dd7da053d9d3759d'
[ 0.583990] zswap: loaded using pool lzo/zbud
[ 0.584076] Key type ._fscrypt registered
[ 0.584076] Key type .fscrypt registered
[ 0.588906] Key type big_key registered
[ 0.588919] Key type trusted registered
[ 0.591272] Key type encrypted registered
[ 0.591274] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.591283] ima: Allocated hash algorithm: sha1
[ 0.607492] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 0.608092] ima: Error Communicating to TPM chip
[ 0.628125] ima: Error Communicating to TPM chip
[ 0.648123] ima: Error Communicating to TPM chip
[ 0.668124] ima: Error Communicating to TPM chip
[ 0.692122] ima: Error Communicating to TPM chip
[ 0.712121] ima: Error Communicating to TPM chip
[ 0.732122] ima: Error Communicating to TPM chip
[ 0.752123] ima: Error Communicating to TPM chip
[ 0.788212] ima: No architecture policies found
[ 0.788219] evm: Initialising EVM extended attributes:
[ 0.788220] evm: security.selinux
[ 0.788221] evm: security.SMACK64
[ 0.788221] evm: security.SMACK64EXEC
[ 0.788221] evm: security.SMACK64TRANSMUTE
[ 0.788222] evm: security.SMACK64MMAP
[ 0.788222] evm: security.apparmor
[ 0.788223] evm: security.ima
[ 0.788223] evm: security.capability
[ 0.788224] evm: HMAC attrs: 0x1
[ 0.788502] PM: Magic number: 4:991:5
[ 0.788516] pci_express 0000:00:1c.7:pcie010: hash matches
[ 0.788657] rtc_cmos 00:04: setting system clock to 2020-09-24T02:00:44 UTC (1600912844)
[ 0.789865] Freeing unused decrypted memory: 2040K
[ 0.790274] Freeing unused kernel image memory: 2716K
[ 0.790335] Write protecting the kernel read-only data: 22528k
[ 0.790816] Freeing unused kernel image memory: 2008K
[ 0.791061] Freeing unused kernel image memory: 1188K
[ 0.799828] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.799830] x86/mm: Checking user space page tables
[ 0.808229] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.808233] Run /init as init process
[ 0.879269] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 0.879271] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 0.879638] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 0.881077] ahci 0000:00:1f.2: version 3.0
[ 0.882586] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 0.892058] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x17 impl SATA mode
[ 0.892061] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst
[ 0.892133] cryptd: max_cpu_qlen set to 1000
[ 0.894300] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.896912] AVX version of gcm_enc/dec engaged.
[ 0.896913] AES CTR mode by8 optimization enabled
[ 0.908022] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 0.928746] scsi host0: ahci
[ 0.928968] scsi host1: ahci
[ 0.929195] scsi host2: ahci
[ 0.929309] scsi host3: ahci
[ 0.929410] scsi host4: ahci
[ 0.929484] scsi host5: ahci
[ 0.929521] ata1: SATA max UDMA/133 abar m2048@0xfe425000 port 0xfe425100 irq 29
[ 0.929525] ata2: SATA max UDMA/133 abar m2048@0xfe425000 port 0xfe425180 irq 29
[ 0.929527] ata3: SATA max UDMA/133 abar m2048@0xfe425000 port 0xfe425200 irq 29
[ 0.929527] ata4: DUMMY
[ 0.929531] ata5: SATA max UDMA/133 abar m2048@0xfe425000 port 0xfe425300 irq 29
[ 0.929531] ata6: DUMMY
[ 0.933855] gpio_ich gpio_ich.2.auto: GPIO from 436 to 511
[ 0.938600] checking generic (d0000000 130000) vs hw (d0000000 10000000)
[ 0.938601] fb0: switching to inteldrmfb from VESA VGA
[ 0.938663] Console: switching to colour dummy device 80x25
[ 0.938691] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 0.948025] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.948026] [drm] Driver supports precise vblank timestamp query.
[ 0.952929] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.955844] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0
[ 0.982791] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 0.992506] fbcon: i915drmfb (fb0) is primary device
[ 1.052386] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.052387] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.052654] hub 1-1:1.0: USB hub found
[ 1.052758] hub 1-1:1.0: 6 ports detected
[ 1.064407] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.064408] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.064664] hub 2-1:1.0: USB hub found
[ 1.064755] hub 2-1:1.0: 8 ports detected
[ 1.077300] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:d9:2b:72:6b:c1
[ 1.077301] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.077352] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 0100FF-0FF
[ 1.078207] e1000e 0000:00:19.0 eno1: renamed from eth0
[ 1.091212] Console: switching to colour frame buffer device 128x48
[ 1.109198] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[ 1.246929] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.246965] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.246985] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.247124] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.247324] ata1.00: ATA-11: KingFast, SBFQ61F3, max UDMA/133
[ 1.247326] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.247565] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.247720] ata1.00: configured for UDMA/133
[ 1.247855] scsi 0:0:0:0: Direct-Access ATA KingFast 61F3 PQ: 0 ANSI: 5
[ 1.248051] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 1.248056] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.248059] sd 0:0:0:0: [sda] Write Protect is off
[ 1.248060] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.248071] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.250756] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.250758] ata3.00: ATAPI: hp DVD-RAM GH80N, RF01, max UDMA/100
[ 1.250887] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.251748] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.255782] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.255785] ata3.00: configured for UDMA/100
[ 1.273529] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 >
[ 1.274125] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.281851] ata2.00: ATA-7: ST380815AS, 3.ADA, max UDMA/133
[ 1.281852] ata2.00: 156250000 sectors, multi 16: LBA48 NCQ (depth 32)
[ 1.307292] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.340057] usb 1-1.2: new low-speed USB device number 3 using ehci-pci
[ 1.340180] ata2.00: configured for UDMA/133
[ 1.340374] scsi 1:0:0:0: Direct-Access ATA ST380815AS A PQ: 0 ANSI: 5
[ 1.340702] sd 1:0:0:0: [sdb] 156250000 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 1.340704] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.340716] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.340718] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.340728] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.343887] scsi 2:0:0:0: CD-ROM hp DVD-RAM GH80N RF01 PQ: 0 ANSI: 5
[ 1.352052] tsc: Refined TSC clocksource calibration: 3092.980 MHz
[ 1.352060] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c95601a146, max_idle_ns: 440795332094 ns
[ 1.352111] clocksource: Switched to clocksource tsc
[ 1.388268] sdb: sdb1 sdb2
[ 1.388975] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.423734] sr 2:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.423736] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.436280] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.436347] sr 2:0:0:0: Attached scsi generic sg2 type 5
[ 1.451413] random: fast init done
[ 1.453163] usb 1-1.2: New USB device found, idVendor=045e, idProduct=0040, bcdDevice= 3.00
[ 1.453165] usb 1-1.2: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 1.453166] usb 1-1.2: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
[ 1.453167] usb 1-1.2: Manufacturer: Microsoft
[ 1.453263] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.453270] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.453281] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.456424] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.460224] usbcore: registered new interface driver usbhid
[ 1.460226] usbhid: USB HID core driver
[ 1.462139] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:045E:0040.0001/input/input5
[ 1.462223] hid-generic 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1a.0-1.2/input0
[ 1.536056] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
[ 1.741231] usb 1-1.3: New USB device found, idVendor=041e, idProduct=4095, bcdDevice=20.20
[ 1.741235] usb 1-1.3: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 1.741237] usb 1-1.3: Product: Live! Cam Sync HD VF0770
[ 1.741238] usb 1-1.3: Manufacturer: Creative Technology Ltd.
[ 1.741240] usb 1-1.3: SerialNumber:
[ 1.824054] usb 1-1.4: new low-speed USB device number 5 using ehci-pci
[ 1.938338] usb 1-1.4: New USB device found, idVendor=046d, idProduct=c31c, bcdDevice=64.00
[ 1.938342] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.938343] usb 1-1.4: Product: USB Keyboard
[ 1.938345] usb 1-1.4: Manufacturer: Logitech
[ 1.943566] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:046D:C31C.0002/input/input6
[ 2.000273] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1a.0-1.4/input0
[ 2.006194] input: Logitech USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C31C.0003/input/input7
[ 2.064209] input: Logitech USB Keyboard System Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C31C.0003/input/input8
[ 2.064397] hid-generic 0003:046D:C31C.0003: input,hidraw2: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1a.0-1.4/input1
[ 2.396011] raid6: sse2x4 gen() 13699 MB/s
[ 2.444011] raid6: sse2x4 xor() 9252 MB/s
[ 2.492011] raid6: sse2x2 gen() 11684 MB/s
[ 2.540013] raid6: sse2x2 xor() 7914 MB/s
[ 2.588008] raid6: sse2x1 gen() 10012 MB/s
[ 2.636009] raid6: sse2x1 xor() 6832 MB/s
[ 2.636010] raid6: using algorithm sse2x4 gen() 13699 MB/s
[ 2.636010] raid6: .... xor() 9252 MB/s, rmw enabled
[ 2.636011] raid6: using ssse3x2 recovery algorithm
[ 2.638892] xor: automatically using best checksumming function avx
[ 2.656781] Btrfs loaded, crc32c=crc32c-intel
[ 3.077359] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 3.278826] systemd[1]: Inserted module 'autofs4'
[ 3.293310] systemd[1]: systemd 245.4-4ubuntu3.2 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 3.312293] systemd[1]: Detected architecture x86-64.
[ 3.332681] systemd[1]: Set hostname to <hp8200>.
[ 3.439556] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
[ 3.497002] systemd[1]: Created slice system-modprobe.slice.
[ 3.497291] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 3.497533] systemd[1]: Created slice User and Session Slice.
[ 3.497586] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.497768] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.497810] systemd[1]: Reached target User and Group Name Lookups.
[ 3.497823] systemd[1]: Reached target Remote File Systems.
[ 3.497832] systemd[1]: Reached target Slices.
[ 3.497904] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 3.497979] systemd[1]: Listening on LVM2 poll daemon socket.
[ 3.498048] systemd[1]: Listening on Syslog Socket.
[ 3.499386] systemd[1]: Listening on Process Core Dump Socket.
[ 3.499455] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 3.499499] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 3.499652] systemd[1]: Listening on Journal Audit Socket.
[ 3.499721] systemd[1]: Listening on Journal Socket (/dev/log).
[ 3.499801] systemd[1]: Listening on Journal Socket.
[ 3.499879] systemd[1]: Listening on udev Control Socket.
[ 3.499937] systemd[1]: Listening on udev Kernel Socket.
[ 3.500826] systemd[1]: Mounting Huge Pages File System...
[ 3.501704] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.502605] systemd[1]: Mounting Kernel Debug File System...
[ 3.503513] systemd[1]: Mounting Kernel Trace File System...
[ 3.505010] systemd[1]: Starting Journal Service...
[ 3.505906] systemd[1]: Starting Availability of block devices...
[ 3.507032] systemd[1]: Starting Set the console keyboard layout...
[ 3.507967] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 3.508834] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 3.508887] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
[ 3.509469] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 3.509501] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 3.510827] systemd[1]: Starting Load Kernel Modules...
[ 3.511817] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 3.512730] systemd[1]: Starting udev Coldplug all Devices...
[ 3.513710] systemd[1]: Starting Uncomplicated firewall...
[ 3.515548] systemd[1]: Mounted Huge Pages File System.
[ 3.515722] systemd[1]: Mounted POSIX Message Queue File System.
[ 3.515842] systemd[1]: Mounted Kernel Debug File System.
[ 3.515969] systemd[1]: Mounted Kernel Trace File System.
[ 3.516815] systemd[1]: Finished Availability of block devices.
[ 3.517415] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 3.523404] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[ 3.524784] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 3.525264] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 3.525293] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 3.526137] systemd[1]: Starting Load/Save Random Seed...
[ 3.527033] systemd[1]: Starting Create System Users...
[ 3.545446] lp: driver loaded but no devices found
[ 3.548110] systemd[1]: Finished Load/Save Random Seed.
[ 3.548696] Started bpfilter
[ 3.548778] bpfilter: Loaded bpfilter_umh pid 368
[ 3.550238] systemd[1]: Finished Create System Users.
[ 3.551185] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 3.557262] ppdev: user-space parallel port driver
[ 3.562704] systemd[1]: Finished Load Kernel Modules.
[ 3.563781] systemd[1]: Mounting FUSE Control File System...
[ 3.564726] systemd[1]: Mounting Kernel Configuration File System...
[ 3.565713] systemd[1]: Starting Apply Kernel Variables...
[ 3.567230] systemd[1]: Mounted FUSE Control File System.
[ 3.569292] systemd[1]: Mounted Kernel Configuration File System.
[ 3.576999] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 3.578084] systemd[1]: Starting udev Kernel Device Manager...
[ 3.590695] systemd[1]: Finished Apply Kernel Variables.
[ 3.600529] systemd[1]: Finished Set the console keyboard layout.
[ 3.605513] systemd[1]: Finished udev Coldplug all Devices.
[ 3.606673] systemd[1]: Starting Helper to synchronize boot up for ifupdown...
[ 3.610872] systemd[1]: Finished Helper to synchronize boot up for ifupdown.
[ 3.623559] systemd[1]: Started Journal Service.
[ 3.629657] systemd-journald[341]: Received client request to flush runtime journal.
[ 3.998400] mc: Linux media interface: v0.10
[ 4.014691] input: HP WMI hotkeys as /devices/virtual/input/input9
[ 4.058740] videodev: Linux video capture interface: v2.00
[ 4.064972] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 4.064974] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 4.064974] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 4.064975] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 4.084232] Adding 1534972k swap on /dev/sda7. Priority:-2 extents:1 across:1534972k SSFS
[ 4.102754] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[ 4.102926] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 4.102932] ext4 filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff)
[ 4.134196] kvm: disabled by bios
[ 4.139617] uvcvideo: Found UVC 1.00 device Live! Cam Sync HD VF0770 (041e:4095)
[ 4.157770] uvcvideo 1-1.3:1.0: Entity type for entity Extension 5 was not initialized!
[ 4.157773] uvcvideo 1-1.3:1.0: Entity type for entity Extension 4 was not initialized!
[ 4.157774] uvcvideo 1-1.3:1.0: Entity type for entity Processing 2 was not initialized!
[ 4.157775] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initialized!
[ 4.157851] input: Live! Cam Sync HD VF0770: Live! as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input10
[ 4.157925] usbcore: registered new interface driver uvcvideo
[ 4.157926] USB Video Class driver (1.1.1)
[ 4.178033] kvm: disabled by bios
[ 4.197716] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 4.219923] usbcore: registered new interface driver snd-usb-audio
[ 4.221920] kvm: disabled by bios
[ 4.227064] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 4.227066] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 4.227068] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 4.227068] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 4.227069] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 4.227070] snd_hda_codec_realtek hdaudioC0D0: Mic=0x19
[ 4.227071] snd_hda_codec_realtek hdaudioC0D0: Line=0x18
[ 4.246091] random: crng init done
[ 4.246093] random: 7 urandom warning(s) missed due to ratelimiting
[ 4.246864] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 4.246910] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 4.246949] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 4.246989] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 4.247032] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 4.273931] kvm: disabled by bios
[ 4.281240] intel_rapl_common: Found RAPL domain package
[ 4.281242] intel_rapl_common: Found RAPL domain core
[ 4.281243] intel_rapl_common: Found RAPL domain uncore
[ 4.281247] intel_rapl_common: RAPL package-0 domain package locked by BIOS
[ 4.928586] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[ 4.978548] audit: type=1400 audit(1600912848.683:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=643 comm="apparmor_parser"
[ 4.983911] audit: type=1400 audit(1600912848.687:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=640 comm="apparmor_parser"
[ 4.983914] audit: type=1400 audit(1600912848.687:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=640 comm="apparmor_parser"
[ 4.987207] audit: type=1400 audit(1600912848.691:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=641 comm="apparmor_parser"
[ 4.991495] audit: type=1400 audit(1600912848.695:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=647 comm="apparmor_parser"
[ 5.003845] audit: type=1400 audit(1600912848.707:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice" pid=642 comm="apparmor_parser"
[ 5.003848] audit: type=1400 audit(1600912848.707:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice//gpg" pid=642 comm="apparmor_parser"
[ 5.007104] audit: type=1400 audit(1600912848.711:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=648 comm="apparmor_parser"
[ 5.007107] audit: type=1400 audit(1600912848.711:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=648 comm="apparmor_parser"
[ 5.021989] kauditd_printk_skb: 14 callbacks suppressed
[ 5.021990] audit: type=1400 audit(1600912848.727:25): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=657 comm="apparmor_parser"
[ 5.345103] audit: type=1400 audit(1600912849.051:26): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=789 comm="cups-browsed" capability=23 capname="sys_nice"
[ 7.206001] e1000e: eno1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[ 7.206004] e1000e 0000:00:19.0 eno1: 10/100 speed: disabling TSO
[ 7.206051] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[ 7.219195] e1000e 0000:00:19.0 eno1: changing MTU from 1500 to 1280
[ 8.962084] e1000e: eno1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[ 8.962090] e1000e 0000:00:19.0 eno1: 10/100 speed: disabling TSO
[ 330.494560] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 330.506050] JFS: nTxBlock = 8192, nTxLock = 65536
[ 330.520724] ntfs: driver 2.1.32 [Flags: R/O MODULE].
[ 330.542036] QNX4 filesystem 0.2.3 registered.
Jedyne błędy jakie zauważyłem i ciągle mi się pojawiają przy ładowaniu systemu to:
Kod:
[ 0.607492] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 0.608092] ima: Error Communicating to TPM chip
[ 0.628125] ima: Error Communicating to TPM chip
[ 0.648123] ima: Error Communicating to TPM chip
[ 0.668124] ima: Error Communicating to TPM chip
[ 0.692122] ima: Error Communicating to TPM chip
[ 0.712121] ima: Error Communicating to TPM chip
[ 0.732122] ima: Error Communicating to TPM chip
[ 0.752123] ima: Error Communicating to TPM chip
Kod:
[ 0.576395] platform eisa.0: Probing EISA bus 0
[ 0.576396] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 0.576397] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 0.576398] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 0.576399] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 0.576400] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 0.576401] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 0.576401] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 0.576402] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 0.576403] platform eisa.0: Cannot allocate resource for EISA slot 8
Kod:
[ 0.017337] ipmi:dmi: Base address is zero, assuming no IPMI interface
A tamte aktualizacje programów pozostają, czy tylko jądro zmienia?
Kto nie próbuje, ten nie umie. Nie ma głupich pytań. Są tylko głupi ludzie.
![Tongue Tongue](https://forum.linuxmint.pl/images/smilies/tongue.png)