Ocena wątku:
  • 0 głosów - średnia: 0
  • 1
  • 2
  • 3
  • 4
  • 5
Klawiatura Bluetooth przysypia
#5
0
(23-03-2022, 10:06)yahoob3 napisał(a): Czekam na wynik polecenia, które podałem wyżej.
Jeśli w tej lokalizacji nie ma tego pliku - daj znać.
Przepraszam, trochę nieuważnie przeczytałem poprzedni Twój post. Zawartość tego pliku  jest poniżej. 
Załączniki już wysyłałem na tym forum - teraz jakoś nie mogę znaleźć stosownego przycisku do tego.
--------------------------------------------------------------------------------------------------------------
Kod:
 
[General]
# Default adaper name
# Defaults to 'BlueZ X.YZ'
#Name = BlueZ


# Default device class. Only the major and minor device class bits are
# considered. Defaults to '0x000000'.
#Class = 0x000100


# How long to stay in discoverable mode before going back to non-discoverable
# The value is in seconds. Default is 180, i.e. 3 minutes.
# 0 = disable timer, i.e. stay discoverable forever
#DiscoverableTimeout = 0


# How long to stay in pairable mode before going back to non-discoverable
# The value is in seconds. Default is 0.
# 0 = disable timer, i.e. stay pairable forever
#PairableTimeout = 0


# Automatic connection for bonded devices driven by platform/user events.
# If a platform plugin uses this mechanism, automatic connections will be
# enabled during the interval defined below. Initially, this feature
# intends to be used to establish connections to ATT channels. Default is 60.
#AutoConnectTimeout = 60


# Use vendor id source (assigner), vendor, product and version information for
# DID profile support. The values are separated by ":" and assigner, VID, PID
# and version.
# Possible vendor id source values: bluetooth, usb (defaults to usb)
#DeviceID = bluetooth:1234:5678:abcd


# Do reverse service discovery for previously unknown devices that connect to
# us. This option is really only needed for qualification since the BITE tester
# doesn't like us doing reverse SDP for some test cases (though there could in
# theory be other useful purposes for this too). Defaults to 'true'.
#ReverseServiceDiscovery = true


# Enable name resolving after inquiry. Set it to 'false' if you don't need
# remote devices name and want shorter discovery cycle. Defaults to 'true'.
#NameResolving = true


# Enable runtime persistency of debug link keys. Default is false which
# makes debug link keys valid only for the duration of the connection
# that they were created for.
#DebugKeys = false


# Restricts all controllers to the specified transport. Default value
# is "dual", i.e. both BR/EDR and LE enabled (when supported by the HW).
# Possible values: "dual", "bredr", "le"
#ControllerMode = dual


# Enables Multi Profile Specification support. This allows to specify if
# system supports only Multiple Profiles Single Device (MPSD) configuration
# or both Multiple Profiles Single Device (MPSD) and Multiple Profiles Multiple
# Devices (MPMD) configurations.
# Possible values: "off", "single", "multiple"
#MultiProfile = off


# Permanently enables the Fast Connectable setting for adapters that
# support it. When enabled other devices can connect faster to us,
# however the tradeoff is increased power consumptions. This feature
# will fully work only on kernel version 4.1 and newer. Defaults to
# 'false'.
#FastConnectable = false


[Policy]


# The ReconnectUUIDs defines the set of remote services that should try
# to be reconnected to in case of a link loss (link supervision
# timeout). The policy plugin should contain a sane set of values by
# default, but this list can be overridden here. By setting the list to
# empty the reconnection feature gets disabled.
#ReconnectUUIDs=00001112-0000-1000-8000-00805f9b34fb, 0000111f-0000-1000-8000-00805f9b34fb, 0000110a-0000-1000-8000-00805f9b34fb


# ReconnectAttempts define the number of attempts to reconnect after a link
# lost. Setting the value to 0 disables reconnecting feature.
#ReconnectAttempts=7


# ReconnectIntervals define the set of intervals in seconds to use in between
# attempts.
# If the number of attempts defined in ReconnectAttempts is bigger than the
# set of intervals the last interval is repeated until the last attempt.
#ReconnectIntervals=1, 2, 4, 8, 16, 32, 64


# AutoEnable defines option to enable all controllers when they are found.
# This includes adapters present on start as well as adapters that are plugged
# in later on. Defaults to 'false'.
AutoEnable=true

Prośba - stosuj znaczniki CODE (następnym razem będzie ostrzeżenie) i nie wklejaj formatowanego tekstu z terminala ./YB3
Odpowiedz


Wiadomości w tym wątku
Klawiatura Bluetooth przysypia - przez Użytkownik677 - 22-03-2022, 12:27
RE: Klawiatura Bluetooth przysypia - przez yahoob3 - 22-03-2022, 13:06
RE: Klawiatura Bluetooth przysypia - przez Użytkownik677 - 22-03-2022, 14:00
RE: Klawiatura Bluetooth przysypia - przez yahoob3 - 23-03-2022, 10:06
RE: Klawiatura Bluetooth przysypia - przez Użytkownik677 - 23-03-2022, 13:36
RE: Klawiatura Bluetooth przysypia - przez yahoob3 - 23-03-2022, 21:44
RE: Klawiatura Bluetooth przysypia - przez Użytkownik677 - 25-03-2022, 22:33

Skocz do:




Użytkownicy przeglądający ten wątek: 1 gości