Ocena wątku:
  • 0 głosów - średnia: 0
  • 1
  • 2
  • 3
  • 4
  • 5
Testowanie łącza speedtest rozłącza internet przy aktywnym VPN
#8
0
(26-04-2023, 17:51)dedito napisał(a): To pozostaje zdiagnozować co się konkretnie "wywala":
- fizyczny link
- łącze do vpn
- łącze do Internetu
- coś innego

Po wywołaniu problemu przydadzą się wyniki poleceń:
Kod:
ip link
Kod:
ethtool nazwa_karty
Kod:
ping -c 4 8.8.8.8


Po wywołaniu powyższych komend dostaję coś takiego

Kod:
michal@michal:~$ ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enp12s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
    link/ether f0:1f:af:28:30:38 brd ff:ff:ff:ff:ff:ff
3: wlp2s0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/ether 4c:80:93:01:d9:a7 brd ff:ff:ff:ff:ff:ff
4: nordlynx: <POINTOPOINT,UP,LOWER_UP> mtu 1420 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
    link/none

michal@michal:~$ ethtool enp12s0
Settings for enp12s0:
    Supported ports: [ TP ]
    Supported link modes:   10baseT/Half 10baseT/Full
                            100baseT/Half 100baseT/Full
                            1000baseT/Half 1000baseT/Full
    Supported pause frame use: No
    Supports auto-negotiation: Yes
    Supported FEC modes: Not reported
    Advertised link modes:  10baseT/Half 10baseT/Full
                            100baseT/Half 100baseT/Full
                            1000baseT/Half 1000baseT/Full
    Advertised pause frame use: No
    Advertised auto-negotiation: Yes
    Advertised FEC modes: Not reported
    Link partner advertised link modes:  10baseT/Half 10baseT/Full
                                         100baseT/Half 100baseT/Full
                                         1000baseT/Half 1000baseT/Full
    Link partner advertised pause frame use: No
    Link partner advertised auto-negotiation: Yes
    Link partner advertised FEC modes: Not reported
    Speed: 1000Mb/s
    Duplex: Full
    Auto-negotiation: on
    Port: Twisted Pair
    PHYAD: 1
    Transceiver: internal
    MDI-X: off
netlink error: Operation not permitted
        Current message level: 0x000000ff (255)
                               drv probe link timer ifdown ifup rx_err tx_err
    Link detected: yes

michal@michal:~$ ping -c 4 8.8.8.8
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
64 bytes from 8.8.8.8: icmp_seq=1 ttl=117 time=54.1 ms
64 bytes from 8.8.8.8: icmp_seq=2 ttl=117 time=53.9 ms
64 bytes from 8.8.8.8: icmp_seq=3 ttl=117 time=53.7 ms
64 bytes from 8.8.8.8: icmp_seq=4 ttl=117 time=54.2 ms

--- 8.8.8.8 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3004ms
rtt min/avg/max/mdev = 53.680/53.976/54.152/0.190 ms


Po zaistnieniu problemu

Kod:
michal@michal:~$ ping -c 4 8.8.8.8
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.

--- 8.8.8.8 ping statistics ---
4 packets transmitted, 0 received, 100% packet loss, time 3071ms
Odpowiedz


Wiadomości w tym wątku
RE: Testowanie łącza speedtest rozłącza internet przy aktywnym VPN - przez kruger84 - 27-04-2023, 06:31

Skocz do:




Użytkownicy przeglądający ten wątek: 1 gości