0
Jakieś pomysły? HP 8770w po zainstalowaniu 21 "nie widzi" tego świeżo instalowanego systemu na dysku sda. (3F0). dysków jest kilka są szyfrowane w BIOS, jedyny niezaszyfrowany to sda. już też próbowałem powyciągać pozostałe dyski. Wersja poprzednia 20.3 nie miała z tą konfiguracją problemu. wiec wnioskuje ze coś jest pozmieniane w instalatorze szkoda ze popsuli ;( Czyli on nie będzie działał w Legracy musi mieć UEFI??
zamieszczę z boot info:
zamieszczę z boot info:
Kod:
boot-repair-4ppa200 [20220829_0004]
============================== Boot Info Summary ===============================
=> No known boot loader is installed in the MBR of /dev/sdb.
=> No known boot loader is installed in the MBR of /dev/sdc.
=> Windows 7/8/10/11/2012 is installed in the MBR of /dev/sdd.
sdd1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda: ___________________________________________________________________________
File system: zfs_member
Boot sector type: Grub2 (v1.99-2.00)
Boot sector info: Grub2 (v1.99-2.00) is installed in the boot sector of
sda and looks at sector 2048 of the same hard drive
for core.img, but core.img can not be found at this
location.
sde: ___________________________________________________________________________
File system: iso9660
Boot sector type: Grub2 (v1.99-2.00)
Boot sector info: Grub2 (v1.99-2.00) is installed in the boot sector of
sde and looks at sector 0 of the same hard drive for
core.img, but core.img can not be found at this
location.
Mounting failed: mount: /mnt/BootInfo/FD/sde: /dev/sde already mounted or mount point busy.
================================ 1 OS detected =================================
OS#1: Linux Mint 21 Vanessa (21) on sda3
================================ Host/Hardware =================================
CPU architecture: 64-bit
Video: GK104GLM [Quadro K5100M] from NVIDIA Corporation
Live-session OS is Linuxmint 64-bit (Linux Mint 21, vanessa, x86_64)
===================================== UEFI =====================================
BIOS/UEFI firmware: 68IAV Ver. F.71(15.113) from Hewlett-Packard
This live-session is in Legacy/BIOS/CSM mode (not in EFI mode).
c152ec201c37b6e97bbc2207e49d1271 sda2/BOOT/fbx64.efi
fdafb5eece6caeccb788c946a28e6872 sda2/BOOT/mmx64.efi
f62c28d9b477b6a1a7b1c991b2b6637d sda2/ubuntu/grubx64.efi
fdafb5eece6caeccb788c946a28e6872 sda2/ubuntu/mmx64.efi
728124f6ec8e22fbdbe7034812c81b95 sda2/ubuntu/shimx64.efi
728124f6ec8e22fbdbe7034812c81b95 sda2/BOOT/BOOTX64.efi
============================= Drive/Partition Info =============================
Disks info: ____________________________________________________________________
sda : is-GPT, hasBIOSboot, has---ESP, not-usb, not-mmc, has-os, no-wind, 2048 sectors * 512 bytes
sdd : notGPT, no-BIOSboot, has-noESP, not-usb, not-mmc, no-os, no-wind, 2048 sectors * 512 bytes
Partitions info (1/3): _________________________________________________________
sda2 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, grubenv-ok, noupdategrub, not-far
sda3 : is-os, 64, apt-get, signed grub-pc grub-efi , grub2, grub-install, grubenv-ok, update-grub, farbios
sdd1 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
Partitions info (2/3): _________________________________________________________
sda2 : is---ESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sda3 : isnotESP, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdd1 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
Partitions info (3/3): _________________________________________________________
sda2 : not--sepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sda
sda3 : not--sepboot, with-boot, fstab-without-boot, not-sep-usr, with--usr, fstab-without-usr, std-grub.d, sda
sdd1 : not--sepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sdd
fdisk -l (filtered): ___________________________________________________________
Disk sda: 1.86 TiB, 2048408248320 bytes, 4000797360 sectors
Disk identifier: E2506672-56E9-4085-AB37-A67FC0E0B02B
Start End Sectors Size Type
sda1 2048 4095 2048 1M BIOS boot
sda2 4096 1054719 1050624 513M EFI System
sda3 1054720 4000796671 3999741952 1.9T Linux filesystem
Disk sdd: 447.13 GiB, 480103981056 bytes, 937703088 sectors
Disk identifier: 0xde05eb80
Boot Start End Sectors Size Id Type
sdd1 2048 937699327 937697280 447.1G 7 HPFS/NTFS/exFAT
Disk sde: 29.88 GiB, 32080200192 bytes, 62656641 sectors
Disk identifier: 6D4F3559-353E-4F68-9E80-073EBFC45977
Start End Sectors Size Type
sde1 64 4709379 4709316 2.2G Microsoft basic data
sde2 4709380 4717875 8496 4.1M EFI System
sde3 4718592 62656577 57937986 27.6G Linux filesystem
parted -lm (filtered): _________________________________________________________
sda:2048GB:scsi:512:512:gpt:ATA Samsung SSD 860:;
1:1049kB:2097kB:1049kB:::bios_grub;
2:2097kB:540MB:538MB:fat32:EFI System Partition:boot, esp;
3:540MB:2048GB:2048GB:ext4::;
sdb:512GB:scsi:512:512:unknown:ATA Samsung SSD 860:;
sdc:256GB:scsi:512:512:unknown:ATA Samsung SSD 860:;
sdd:480GB:scsi:512:4096:msdos:ATA KINGSTON SUV500M:;
1:1049kB:480GB:480GB:ntfs::;
sde:32.1GB:scsi:512:512:gpt:Samsung Flash Drive:;
1:32.8kB:2411MB:2411MB::ISO9660:hidden, msftdata;
2:2411MB:2416MB:4350kB::Appended2:boot, esp;
3:2416MB:32.1GB:29.7GB:ext4::;
blkid (filtered): ______________________________________________________________
NAME FSTYPE UUID PARTUUID LABEL PARTLABEL
sda zfs_member 13509431513614253297 rpool
├─sda1 8a9e6975-1b70-4cfe-9650-e621e403a773
├─sda2 vfat BF30-EDC9 3dec6d95-54a9-4f7c-b9ac-c32aa6b530cc EFI System Partition
└─sda3 ext4 7914f047-336a-4798-a777-0f18db889713 d2adb55d-39a7-48a1-a797-f5bb38f0f883
sdb
sdc
sdd
└─sdd1 ntfs 9AB09219B091FBC7 de05eb80-01
sde iso9660 2022-07-26-18-56-47-00 Linux Mint 21 Xfce 64-bit
├─sde1 iso9660 2022-07-26-18-56-47-00 6d4f3559-353e-4f68-9e81-073ebfc45977 Linux Mint 21 Xfce 64-bit ISO9660
├─sde2 vfat 8D6C-A9F8 6d4f3559-353e-4f68-9e82-073ebfc45977 ESP Appended2
└─sde3 ext4 b78a626c-9dab-4138-80aa-fcc2ffb5d8f4 2e43c8fe-b9a5-664b-b16f-c17bd843a5fa writable
Mount points (filtered): _______________________________________________________
Avail Use% Mounted on
/dev/disk/by-label/writable[/install-logs-2022-08-28.3/log] 25.5G 1% /var/log
/dev/sda2 496.1M 3% /mnt/boot-sav/sda2
/dev/sda3 1.7T 0% /media/mint/7914f047-336a-4798-a777-0f18db889713
/dev/sdd1 447G 0% /mnt/boot-sav/sdd1
/dev/sde1 0 100% /cdrom
Mount options (filtered): ______________________________________________________
/dev/disk/by-label/writable[/install-logs-2022-08-28.3/log] ext4 rw,relatime
/dev/sda2 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro
/dev/sda3 ext4 rw,nosuid,nodev,relatime,errors=remount-ro
/dev/sdd1 fuseblk rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096
/dev/sde1 iso9660 ro,noatime,nojoliet,check=s,map=n,blocksize=2048,iocharset=utf8
Suggested repair: ______________________________________________________________
The default repair of the Boot-Repair utility would reinstall the grub-efi of
sda3,
using the following options: sda2/boot/efi
Additional repair would be performed: unhide-bootmenu-10s use-standard-efi-file
Blockers in case of suggested repair: __________________________________________
The current session is in BIOS-compatibility mode. Please disable BIOS-compatibility/CSM/Legacy mode in your UEFI firmware, and use this software from a live-CD (or live-USB) that is compatible with UEFI booting mode. For example, use a live-USB of Boot-Repair-Disk-64bit (www.sourceforge.net/p/boot-repair-cd), after making sure your BIOS is set up to boot USB in EFI mode. This will enable this feature.
Final advice in case of suggested repair: ______________________________________
Please do not forget to make your UEFI firmware boot on the Linux Mint 21 Vanessa (21) entry (sda2/efi/****/grub****.efi (**** will be updated in the final message) file) !
The boot of your PC is in BIOS-compatibility/CSM/Legacy mode. You may want to retry after changing it to UEFI mode.
Wygląda na to, że komputer uruchamia się w trybie bez UEFI, zaś Mint 21 zainstalowałeś w trybie UEFI, stąd ten brak widoczności Minta 21 lub trzeba w Bios ustawić aby szukał systemu najpierw na dysku sda bo tam zainstalowałeś program rozruchowy.
. Dziekuje pozwoliłeś mi sformułować właściwe pytanie: JAK ZAINSTALOWAĆ LINUX MINT 21 w trybie legracy a nie UEFI?
