Ocena wątku:
  • 0 głosów - średnia: 0
  • 1
  • 2
  • 3
  • 4
  • 5
Rozwiązane Problem z zewnętrzną kartą sieiową
#1
0
Cześć. Jak w temacie, bije się już z nią trzeci dzień i nic. Na Win7 śmiga bez problemu, tu jej nie mogę "aktywować". Poniżej zgodnie z "FAQ" wklejam po kolei wyniki : 
1. Załącznik numer 1 jest bez podłączonej zewnętrznej karty sieciowej.
2. Załącznik wygenerowany po podłączeniu do USB karty sieciowej dokładnie : Alfa AWUS036AC.
Dalsze polecenia :
1. inxi -N -xxx|pastebinit
https://pastebin.com/WsHiXPSt
Kod:
Network:
  Device-1: Intel Centrino Wireless-N 1000 [Condor Peak] driver: iwlwifi
  v: kernel port: d000 bus ID: 07:00.0 chip ID: 8086:0083
  Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
  vendor: Micro-Star MSI driver: r8169 v: kernel port: 8000 bus ID: 08:00.0
  chip ID: 10ec:8168
  Device-3: Realtek RTL8812AU 802.11a/b/g/n/ac WLAN Adapter type: USB
  driver: usb-network bus ID: 1-1.1:4 chip ID: 0bda:8812 serial: 123456
2. lsusb|pastebinit
https://pastebin.com/4XzmkDnF
Kod:
Bus 002 Device 005: ID 0bda:0158 Realtek Semiconductor Corp. USB 2.0 multicard reader
Bus 002 Device 004: ID 0db0:3801 Micro Star International Motorola Bluetooth 2.1+EDR Device
Bus 002 Device 003: ID 045e:0084 Microsoft Corp. Basic Optical Mouse
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 0bda:8812 Realtek Semiconductor Corp. RTL8812AU 802.11a/b/g/n/ac WLAN Adapter
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
3. dmesg|pastebinit
https://pastebin.com/0iMZHEzR
4. lspci|pastebinit
https://pastebin.com/gSdzgkTT
Kod:
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18)
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 18)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06)
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06)
00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 06)
00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 06)
00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 06)
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6)
00:1f.0 ISA bridge: Intel Corporation HM55 Chipset LPC Interface Controller (rev 06)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 06)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06)
00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06)
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Madison [Mobility Radeon HD 5730 / 6570M]
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Redwood HDMI Audio [Radeon HD 5000 Series]
07:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000 [Condor Peak]
08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 03)
3f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05)
3f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05)
3f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05)
3f:02.1 Host bridge: Intel Corporation 1st Generation Core i3/5/7 Processor QPI Physical 0 (rev 05)
3f:02.2 Host bridge: Intel Corporation 1st Generation Core i3/5/7 Processor Reserved (rev 05)
3f:02.3 Host bridge: Intel Corporation 1st Generation Core i3/5/7 Processor Reserved (rev 05)
Od piątku przeprowadziłem już tego typu zabiegi :
1. https://www.youtube.com/watch?v=_EsMLLc_cMI
2. https://askubuntu.com/questions/573737/a...fi-adapter
3. https://www.youtube.com/watch?v=ylE6ZvuzVtQ
4. itp
Nic nie pomogło. Nie jestem w stanie przełączyć się na zewnętrzną kartę sieciową.

Zwracam się z prośbą o pomoc.


Załączone pliki
.txt   wireless-info.txt (Rozmiar: 17,59 KB / Pobrań: 2)
.txt   wireless-info2.txt (Rozmiar: 21,4 KB / Pobrań: 2)
#2
1
Better response on post RE: Problem z zewnętrzną kartą sieiowąTe krótkie wyniki nie musisz wklejać na pastebin, tylko te długie, które się nie mieszczą w wiadomości.
https://github.com/gnab/rtl8812au
Kod:
sudo apt update
sudo apt install git
git clone https://github.com/gnab/rtl8812au.git
sudo cp -r rtl8812au  /usr/src/rtl8812au-4.2.2
sudo dkms add -m rtl8812au -v 4.2.2
sudo dkms build -m rtl8812au -v 4.2.2
sudo dkms install -m rtl8812au -v 4.2.2
#3
0
(23-02-2020, 10:09)dedito napisał(a): Te krótkie wyniki nie musisz wklejać na pastebin, tylko te długie, które się nie mieszczą w wiadomości.
https://github.com/gnab/rtl8812au
Kod:
sudo apt update
sudo apt install git
git clone https://github.com/gnab/rtl8812au.git
sudo cp -r rtl8812au  /usr/src/rtl8812au-4.2.2
sudo dkms add -m rtl8812au -v 4.2.2
sudo dkms build -m rtl8812au -v 4.2.2
sudo dkms install -m rtl8812au -v 4.2.2

Wszystko poszło bez żadnych errorów. Rozumiem teraz zrobić reboot, następnie podpiąć kartę do USB.

Dodano po pewnym czasie:
System zrestartowany. Karta włożona do USB. Żadnej odpowiedzi.
#4
0
Pokaż teraz wireless-info z podpiętą kartą
#5
0
W załączniku odpowiedź.


Załączone pliki
.txt   wireless-info.txt (Rozmiar: 21,4 KB / Pobrań: 2)
#6
0
Spróbuj z tym, autor pisze, że pracuje z kernelem 5.3, który jest u Ciebie.
https://github.com/gordboy/rtl8812au
Instrukcje wewnątrz.
Dla pewności instaluj przy wypiętej karcie.

Wklej wyniki z pobierania i budowania.

Dla ułatwienia:
Kod:
git clone https://github.com/gordboy/rtl8812au.git
sudo cp -r rtl8812au  /usr/src/rtl8812au-5.2.20
sudo dkms add -m rtl8812au -v 5.2.20
sudo dkms build -m rtl8812au -v 5.2.20
sudo dkms install -m rtl8812au -v 5.2.20

I na koniec pokaż wynik sudo dkms status
#7
0
(23-02-2020, 10:54)dedito napisał(a): Spróbuj z tym, autor pisze, że pracuje z kernelem 5.3, który jest u Ciebie.
https://github.com/gordboy/rtl8812au
Instrukcje wewnątrz.
Dla pewności instaluj przy wypiętej karcie.

Wklej wyniki z pobierania i budowania.

Dla ułatwienia:
Kod:
git clone https://github.com/gordboy/rtl8812au.git
sudo cp -r rtl8812au  /usr/src/rtl8812au-5.2.20
sudo dkms add -m rtl8812au -v 5.2.20
sudo dkms build -m rtl8812au -v 5.2.20
sudo dkms install -m rtl8812au -v 5.2.20

I na koniec pokaż wynik

Ok. Na początek muszę się chyba pozbyć poprzedniego katalogu czyli : sudo dkms remove -m rtl8812au -v 4.2.2 --all ?
Chcąc użyć git clone https://github.com/gordboy/rtl8812au wyskakuje mi komunikat :
fatal: destination path 'rtl8812au' already exists and is not an empty directory
#8
0
Poprzedni katalog z gita rtl8812au usuń.
Stary moduł też usuń.
#9
0
Zainstalowano bez errorów : DKMS install compled.
Nastepnie reboot. Karta włożona - nic się nie dzieje. Moje pytanie jest następujące : Linux pracuje jak Win? , czyli po włożeniu ma odpalić z automatu?, czy może mam coś, gdzieś przełączyć - żeby ruszyła karta zewnętrzna, a nie wbudowana.

W załączeniu LOG.


Załączone pliki
.txt   wireless-info.txt (Rozmiar: 26,89 KB / Pobrań: 2)
#10
0
Nie czytasz co się pisze.
Miałeś pokazać wynik sudo dkms status

Na ostatnim wyniku wireless info pojawiła się ta nowa karta.


Skocz do:




Użytkownicy przeglądający ten wątek: 1 gości