Ocena wątku:
  • 0 głosów - średnia: 0
  • 1
  • 2
  • 3
  • 4
  • 5
Rozwiązane PulseEffects - nieaktywny korektor
#1
0
Witam

Nie mogę włączyć korektora w PulseEffects. Nie działa przełącznik on /off. Mam zainstalowanego Minta. 20 Cinnamon.
Proszę o podpowiedź jak ustawić korektor.
#2
0
Możesz spróbować:
Kod:
sudo apt install -y lsp-plugins
Po zainstalowaniu zrestartuj system
#3
0
Po zainstalowaniu korektor jest aktywny ale po dwóch sekundach PulseEffects się wyłącza i dźwięku nie słychać.
PulseEffect instalowałem przez menedżer oprogramowania.

Później zainstalowałem tak jak poniżej i też wywala po dwóch sekundach.
Kod:
sudo add-apt-repository ppa:mikhailnov/pulseeffects -y
sudo apt update
sudo apt install pulseeffects pulseaudio --install-recommends
#4
0
Ale pierwsze musisz odinstalować starą wersję przez menedżer oprogramowania i dopiero zainstalować nowe. Dzieje ci się to samo bo te komendy ci nic nie zainstalowały.
#5
0
Najpierw odinstalowałem przez menedżera oprogramowania później zainstalowałem nową wersję. Zainstalowało się poprawnie.
#6
0
To rozumiem, że problem rozwiązany czy nie? (Bo to, że się zainstalowało to nie znaczy, że działa)
#7
0
Problem nierozwiązany. PulseEffect nadal wyłącza się po dwóch sekundach i dźwięku nie słychać.
#8
0
Wyślij co masz po wpisaniu w terninal:
Kod:
inxi -Fxz
#9
0
Kod:
przemek@przemek-B85M-HD3:~$ inxi -Fxz
System:
  Kernel: 5.4.0-40-generic x86_64 bits: 64 compiler: gcc v: 9.3.0
  Desktop: Cinnamon 4.6.6 Distro: Linux Mint 20 Ulyana
  base: Ubuntu 20.04 focal
Machine:
  Type: Desktop Mobo: Gigabyte model: B85M-HD3 v: x.x serial: <filter>
  BIOS: American Megatrends v: F3 date: 05/09/2013
CPU:
  Topology: Quad Core model: Intel Core i5-4440 bits: 64 type: MCP
  arch: Haswell rev: 3 L2 cache: 6144 KiB
  flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  bogomips: 24742
  Speed: 1996 MHz min/max: 800/3300 MHz Core speeds (MHz): 1: 1556 2: 1505
  3: 1751 4: 1587
Graphics:
  Device-1: Intel Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics
  vendor: Gigabyte driver: i915 v: kernel bus ID: 00:02.0
  Device-2: NVIDIA GM107 [GeForce GTX 750 Ti] vendor: Micro-Star MSI
  driver: nvidia v: 440.100 bus ID: 01:00.0
  Display: x11 server: X.Org 1.20.8 driver: modesetting,nvidia
  unloaded: fbdev,nouveau,vesa resolution: 1920x1080~60Hz
  OpenGL: renderer: GeForce GTX 750 Ti/PCIe/SSE2 v: 4.6.0 NVIDIA 440.100
  direct render: Yes
Audio:
  Device-1: Intel Xeon E3-1200 v3/4th Gen Core Processor HD Audio
  driver: snd_hda_intel v: kernel bus ID: 00:03.0
  Device-2: Intel 8 Series/C220 Series High Definition Audio
  vendor: Gigabyte driver: snd_hda_intel v: kernel bus ID: 00:1b.0
  Device-3: NVIDIA GM107 High Definition Audio [GeForce 940MX]
  vendor: Micro-Star MSI driver: snd_hda_intel v: kernel bus ID: 01:00.1
  Device-4: Z-Star Micro Venus USB2.0 Camera type: USB
  driver: snd-usb-audio,uvcvideo bus ID: 3-3:2
  Sound Server: ALSA v: k5.4.0-40-generic
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
  vendor: Gigabyte driver: r8169 v: kernel port: d000 bus ID: 03:00.0
  IF: enp3s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:
  Local Storage: total: 960.15 GiB used: 60.73 GiB (6.3%)
  ID-1: /dev/sda vendor: Western Digital model: WD10EZEX-08RKKA0
  size: 931.51 GiB
  ID-2: /dev/sdb type: USB vendor: SanDisk model: Ultra size: 28.64 GiB
Partition:
  ID-1: / size: 54.75 GiB used: 8.53 GiB (15.6%) fs: ext4 dev: /dev/sda5
  ID-2: /boot size: 503.9 MiB used: 202.1 MiB (40.1%) fs: ext2
  dev: /dev/sda1
  ID-3: /home size: 854.90 GiB used: 51.99 GiB (6.1%) fs: ext4
  dev: /dev/sda6
  ID-4: swap-1 size: 5.59 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda7
Sensors:
  System Temperatures: cpu: 44.0 C mobo: N/A gpu: nvidia temp: 39 C
  Fan Speeds (RPM): N/A gpu: nvidia fan: 34%
Info:
  Processes: 225 Uptime: 4h 20m Memory: 7.65 GiB used: 1.60 GiB (20.9%)
  Init: systemd runlevel: 5 Compilers: gcc: 9.3.0 Shell: bash v: 5.0.17
  inxi: 3.0.38
przemek@przemek-B85M-HD3:~$
#10
0
Jeśli chodzi o dźwięk to nie masz dźwięku w ogóle czy tylko jak uruchomisz Pulseeffects?
Jak nie masz w ogóle to zobacz ustawienia dźwięku(czy masz wybrane dobre urządzenie wyjściowe) - Aplikacja Sound (systemowa)


Skocz do:




Użytkownicy przeglądający ten wątek: 1 gości