| Statystyki |
» Użytkownicy: 717
» Najnowszy użytkownik: marlon1970
» Wątków na forum: 2 659
» Postów na forum: 18 800
Pełne statystyki
|
|
|
| Porty USB przestały działać. |
|
Napisane przez: 2000adam - 10-02-2021, 17:53 - Forum: Sprzęt i sterowniki
- Odpowiedzi (4)
|
 |
Przy uruchamianiu się systemu pojawiają się komunikaty Laptop Lenovo G580
Kod: usb 1-1port1: over-current condition
Kod: adam@adam-Lenovo-G580:~$ lsusb
Bus 002 Device 003: ID 5986:0295 Acer, Inc
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 001 Device 003: ID 105b:e065 Foxconn International, Inc. BCM43142A0 Bluetooth module
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Kod: adam@adam-Lenovo-G580:~$ systemd-analyze blame
1.319s dev-sda5.device
1.156s networkd-dispatcher.service
963ms udisks2.service
826ms accounts-daemon.service
706ms ubuntu-system-adjustments.service
659ms systemd-resolved.service
643ms systemd-journal-flush.service
562ms NetworkManager.service
534ms lightdm.service
531ms plymouth-quit-wait.service
502ms avahi-daemon.service
498ms polkit.service
425ms thermald.service
416ms wpa_supplicant.service
404ms systemd-logind.service
397ms systemd-journald.service
390ms upower.service
383ms ufw.service
345ms ModemManager.service
344ms gpu-manager.service
334ms keyboard-setup.service
329ms systemd-rfkill.service
302ms systemd-udev-trigger.service
lines 1-23
|
|
|
|
| Problem z pendrajwem. |
|
Napisane przez: mafifi - 10-02-2021, 14:18 - Forum: Software
- Odpowiedzi (10)
|
 |
Cześć.
Mam problem z pendrajwem Kingston DataTraveler 100 G3 32GB. Gdy skopiuje na niego filmy avi (pliki w rozmiarze 700 MB) to póżniej po owarciu ich programem vlc okazuje się błąd - pliki są uszkodzone po czym media player się zawiesza i nie można zamknąc procesu (muszę restartować komputer). Robie to wszystko w taki sam sposób od prawie 2 lat, zawsze korzystam z bezpiecznego wysuwania, a filmów tak skopiowałem kilkaset. Pendrive jest w formacie NTFS.
Szukałem w internecie i skorzystałem z tej porady na laptopie z Windows 10 krok po kroku:
1. Otwieramy wiersz poleceń (administrator)
2. diskpart
3. list disk
4. select disk X
5. clean
6. create partition primary
7. format fs=ntfs label="Moj_Pendrive" quick
Podaję specyfikację komputera:
Kod: System: Kernel: 5.4.0-65-generic x86_64 bits: 64 compiler: gcc v: 9.3.0 Desktop: Cinnamon 4.8.6
wm: muffin dm: LightDM Distro: Linux Mint 20.1 Ulyssa base: Ubuntu 20.04 focal
Machine: Type: Desktop System: Gigabyte product: N/A v: N/A serial: <filter> Chassis: type: 3
serial: <filter>
Mobo: Gigabyte model: B75M-D2V v: x.x serial: <filter> BIOS: American Megatrends v: F3
date: 10/26/2012
CPU: Topology: Dual Core model: Intel Pentium G2020 bits: 64 type: MCP arch: Ivy Bridge
rev: 9 L2 cache: 3072 KiB
flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 11573
Speed: 2893 MHz min/max: 1600/2900 MHz Core speeds (MHz): 1: 2893 2: 2893
Graphics: Device-1: Intel Xeon E3-1200 v2/3rd Gen Core processor Graphics vendor: Gigabyte
driver: i915 v: kernel bus ID: 00:02.0 chip ID: 8086:0152
Display: x11 server: X.Org 1.20.9 driver: modesetting unloaded: fbdev,vesa
resolution: 1920x1080~60Hz
OpenGL: renderer: Mesa DRI Intel HD Graphics 2500 (IVB GT1) v: 4.2 Mesa 20.2.6
compat-v: 3.0 direct render: Yes
Audio: Device-1: C-Media CMI8788 [Oxygen HD Audio] vendor: ASUSTeK CMI8786 driver: snd_oxygen
v: kernel bus ID: 04:04.0 chip ID: 13f6:8788
Sound Server: ALSA v: k5.4.0-65-generic
Network: Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Gigabyte
driver: r8169 v: kernel port: e000 bus ID: 02:00.0 chip ID: 10ec:8168
IF: enp2s0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives: Local Storage: total: 987.41 GiB used: 479.51 GiB (48.6%)
ID-1: /dev/sda vendor: Kingston model: SV300S37A60G size: 55.90 GiB speed: 6.0 Gb/s
serial: <filter>
ID-2: /dev/sdb vendor: Western Digital model: WD10EZEX-00RKKA0 size: 931.51 GiB
speed: 3.0 Gb/s serial: <filter>
Partition: ID-1: / size: 27.37 GiB used: 13.80 GiB (50.4%) fs: ext4 dev: /dev/sda1
ID-2: /home size: 23.73 GiB used: 16.77 GiB (70.7%) fs: ext4 dev: /dev/sda6
ID-3: swap-1 size: 3.72 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda5
USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 2 rev: 2.0 chip ID: 1d6b:0002
Hub: 1-1:2 info: Intel Integrated Rate Matching Hub ports: 6 rev: 2.0
chip ID: 8087:0024
Device-1: 1-1.5:3 info: Logitech Media Keyboard K200 type: Keyboard,HID
driver: hid-generic,usbhid rev: 1.1 chip ID: 046d:c31d
Hub: 2-0:1 info: Full speed (or root) Hub ports: 2 rev: 2.0 chip ID: 1d6b:0002
Hub: 2-1:2 info: Intel Integrated Rate Matching Hub ports: 6 rev: 2.0
chip ID: 8087:0024
Hub: 3-0:1 info: Full speed (or root) Hub ports: 4 rev: 2.0 chip ID: 1d6b:0002
Device-2: 3-3:2 info: SteelSeries ApS SteelSeries Kinzu V3 Gaming Mouse type: HID,Mouse
driver: hid-generic,usbhid rev: 1.1 chip ID: 1038:1388
Hub: 4-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 chip ID: 1d6b:0003
Sensors: System Temperatures: cpu: 29.0 C mobo: N/A
Fan Speeds (RPM): N/A
Repos: No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/google-chrome.list
1: deb [arch=amd64] http: //dl.google.com/linux/chrome/deb/ stable main
Active apt repos in: /etc/apt/sources.list.d/official-package-repositories.list
1: deb http: //packages.linuxmint.com ulyssa main upstream import backport #id:linuxmint_main
2: deb http: //archive.ubuntu.com/ubuntu focal main restricted universe multiverse
3: deb http: //archive.ubuntu.com/ubuntu focal-updates main restricted universe multiverse
4: deb http: //archive.ubuntu.com/ubuntu focal-backports main restricted universe multiverse
5: deb http: //security.ubuntu.com/ubuntu/ focal-security main restricted universe multiverse
6: deb http: //archive.canonical.com/ubuntu/ focal partner
Active apt repos in: /etc/apt/sources.list.d/spotify.list
1: deb http: //repository.spotify.com stable non-free
Info: Processes: 184 Uptime: 25m Memory: 7.65 GiB used: 1.24 GiB (16.1%) Init: systemd v: 245
runlevel: 5 Compilers: gcc: 9.3.0 alt: 7/9 Client: Unknown python3.8 client
inxi: 3.0.38
|
|
|
|
| Problem ze sterownikiem nouveau. |
|
Napisane przez: Gość - 09-02-2021, 23:48 - Forum: Sprzęt i sterowniki
- Brak odpowiedzi
|
|
W logach pojawia mi się komunikat:
Kod: nouveau 0000:01:00.0: bus: MMIO read of 00000000 FAULT at 619444
A tutaj macie logi:
Xorg.0.log
Kod: [ 3.931]
X.Org X Server 1.20.9
X Protocol Version 11, Revision 0
[ 3.931] Build Operating System: Linux 4.15.0-130-generic x86_64 Ubuntu
[ 3.931] Current Operating System: Linux laptop1-Lenovo-ideapad-Y700-15ISK 5.4.0-65-generic #73-Ubuntu SMP Mon Jan 18 17:25:17 UTC 2021 x86_64
[ 3.931] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-65-generic root=UUID=d836c93a-b67a-4ab0-a693-5319cf6468f3 ro quiet splash
[ 3.931] Build Date: 17 January 2021 09:13:31AM
[ 3.931] xorg-server 2:1.20.9-2ubuntu1.2~20.04.1 (For technical support please see http://www.ubuntu.com/support)
[ 3.931] Current version of pixman: 0.38.4
[ 3.931] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 3.931] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 3.931] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Feb 9 20:55:26 2021
[ 3.933] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 3.936] (==) No Layout section. Using the first Screen section.
[ 3.936] (==) No screen section available. Using defaults.
[ 3.936] (**) |-->Screen "Default Screen Section" (0)
[ 3.936] (**) | |-->Monitor "<default monitor>"
[ 3.937] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 3.937] (==) Automatically adding devices
[ 3.937] (==) Automatically enabling devices
[ 3.937] (==) Automatically adding GPU devices
[ 3.937] (==) Automatically binding GPU devices
[ 3.937] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 3.939] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 3.939] Entry deleted from font path.
[ 3.939] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 3.939] Entry deleted from font path.
[ 3.939] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 3.939] Entry deleted from font path.
[ 3.939] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 3.939] Entry deleted from font path.
[ 3.939] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 3.939] Entry deleted from font path.
[ 3.939] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 3.939] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 3.939] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 3.939] (II) Loader magic: 0x5614179ca020
[ 3.939] (II) Module ABI versions:
[ 3.939] X.Org ANSI C Emulation: 0.4
[ 3.939] X.Org Video Driver: 24.1
[ 3.939] X.Org XInput driver : 24.1
[ 3.939] X.Org Server Extension : 10.0
[ 3.940] (++) using VT number 7
[ 3.940] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 3.941] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 3.941] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 3.959] (--) PCI:*(0@0:2:0) 8086:191b:17aa:3802 rev 6, Mem @ 0x92000000/16777216, 0xa0000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[ 3.959] (--) PCI: (1@0:0:0) 10de:139b:17aa:3802 rev 162, Mem @ 0x93000000/16777216, 0x80000000/268435456, 0x90000000/33554432, I/O @ 0x00004000/128
[ 3.959] (II) LoadModule: "glx"
[ 3.960] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 3.968] (II) Module glx: vendor="X.Org Foundation"
[ 3.968] compiled for 1.20.9, module version = 1.0.0
[ 3.968] ABI class: X.Org Server Extension, version 10.0
[ 4.054] (==) Matched modesetting as autoconfigured driver 0
[ 4.054] (==) Matched fbdev as autoconfigured driver 1
[ 4.054] (==) Matched vesa as autoconfigured driver 2
[ 4.054] (==) Assigned the driver to the xf86ConfigLayout
[ 4.054] (II) LoadModule: "modesetting"
[ 4.055] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 4.055] (II) Module modesetting: vendor="X.Org Foundation"
[ 4.055] compiled for 1.20.9, module version = 1.20.9
[ 4.055] Module class: X.Org Video Driver
[ 4.055] ABI class: X.Org Video Driver, version 24.1
[ 4.056] (II) LoadModule: "fbdev"
[ 4.056] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 4.056] (II) Module fbdev: vendor="X.Org Foundation"
[ 4.056] compiled for 1.20.1, module version = 0.5.0
[ 4.056] Module class: X.Org Video Driver
[ 4.056] ABI class: X.Org Video Driver, version 24.0
[ 4.056] (II) LoadModule: "vesa"
[ 4.056] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 4.057] (II) Module vesa: vendor="X.Org Foundation"
[ 4.057] compiled for 1.20.4, module version = 2.4.0
[ 4.057] Module class: X.Org Video Driver
[ 4.057] ABI class: X.Org Video Driver, version 24.0
[ 4.057] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 4.057] (II) FBDEV: driver for framebuffer: fbdev
[ 4.057] (II) VESA: driver for VESA chipsets: vesa
[ 4.094] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[ 4.104] (II) modeset(0): using drv /dev/dri/card0
[ 4.104] (WW) Falling back to old probe method for fbdev
[ 4.104] (II) Loading sub module "fbdevhw"
[ 4.104] (II) LoadModule: "fbdevhw"
[ 4.104] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 4.105] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 4.105] compiled for 1.20.9, module version = 0.0.2
[ 4.105] ABI class: X.Org Video Driver, version 24.1
[ 4.106] (II) modeset(G0): using drv /dev/dri/card1
[ 4.106] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 4.106] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 4.106] (==) modeset(0): RGB weight 888
[ 4.106] (==) modeset(0): Default visual is TrueColor
[ 4.106] (II) Loading sub module "glamoregl"
[ 4.106] (II) LoadModule: "glamoregl"
[ 4.106] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 4.113] (II) Module glamoregl: vendor="X.Org Foundation"
[ 4.113] compiled for 1.20.9, module version = 1.0.1
[ 4.113] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4.276] (II) modeset(0): glamor X acceleration enabled on Mesa Intel(R) HD Graphics 530 (SKL GT2)
[ 4.276] (II) modeset(0): glamor initialized
[ 4.277] (II) modeset(0): Output eDP-1 has no monitor section
[ 4.283] (II) modeset(0): Output HDMI-1 has no monitor section
[ 4.284] (II) modeset(0): EDID for output eDP-1
[ 4.284] (II) modeset(0): Manufacturer: SDC Model: 3752 Serial#: 0
[ 4.284] (II) modeset(0): Year: 2014 Week: 0
[ 4.284] (II) modeset(0): EDID Version: 1.4
[ 4.284] (II) modeset(0): Digital Display Input
[ 4.284] (II) modeset(0): 6 bits per channel
[ 4.284] (II) modeset(0): Digital interface is DisplayPort
[ 4.284] (II) modeset(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 4.284] (II) modeset(0): Gamma: 2.20
[ 4.284] (II) modeset(0): No DPMS capabilities specified
[ 4.284] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 4.284] (II) modeset(0): First detailed timing is preferred mode
[ 4.284] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[ 4.284] (II) modeset(0): redX: 0.635 redY: 0.335 greenX: 0.295 greenY: 0.610
[ 4.284] (II) modeset(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 4.284] (II) modeset(0): Manufacturer's mask: 0
[ 4.284] (II) modeset(0): Supported detailed timing:
[ 4.284] (II) modeset(0): clock: 142.9 MHz Image Size: 344 x 194 mm
[ 4.284] (II) modeset(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2082 h_border: 0
[ 4.284] (II) modeset(0): v_active: 1080 v_sync: 1082 v_sync_end 1087 v_blanking: 1144 v_border: 0
[ 4.284] (II) modeset(0): Unknown vendor-specific block f
[ 4.284] (II) modeset(0): SAMSUNG
[ 4.284] (II) modeset(0): LTN156HL09401
[ 4.284] (II) modeset(0): EDID (in hex):
[ 4.284] (II) modeset(0): 00ffffffffffff004c83523700000000
[ 4.284] (II) modeset(0): 00180104952213780ab995a2554b9c26
[ 4.284] (II) modeset(0): 0f505400000001010101010101010101
[ 4.284] (II) modeset(0): 010101010101d23780a2703840403020
[ 4.284] (II) modeset(0): 250058c2100000190000000f00000000
[ 4.284] (II) modeset(0): 00000000001e82105200000000fe0053
[ 4.284] (II) modeset(0): 414d53554e470a204c83484c000000fe
[ 4.284] (II) modeset(0): 004c544e313536484c30393430310051
[ 4.284] (II) modeset(0): Printing probed modes for output eDP-1
[ 4.290] (II) modeset(0): EDID for output HDMI-1
[ 4.290] (II) modeset(0): Output eDP-1 connected
[ 4.290] (II) modeset(0): Output HDMI-1 disconnected
[ 4.290] (II) modeset(0): Using exact sizes for initial modes
[ 4.290] (II) modeset(0): Output eDP-1 using initial mode 1920x1080 +0+0
[ 4.290] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 4.290] (==) modeset(0): DPI set to (96, 96)
[ 4.290] (II) Loading sub module "fb"
[ 4.290] (II) LoadModule: "fb"
[ 4.290] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 4.290] (II) Module fb: vendor="X.Org Foundation"
[ 4.290] compiled for 1.20.9, module version = 1.0.0
[ 4.290] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4.290] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[ 4.291] (==) modeset(G0): RGB weight 888
[ 4.291] (==) modeset(G0): Default visual is TrueColor
[ 4.291] (II) Loading sub module "glamoregl"
[ 4.291] (II) LoadModule: "glamoregl"
[ 4.291] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 4.291] (II) Module glamoregl: vendor="X.Org Foundation"
[ 4.291] compiled for 1.20.9, module version = 1.0.1
[ 4.291] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4.338] (II) modeset(G0): glamor X acceleration enabled on NV117
[ 4.338] (II) modeset(G0): glamor initialized
[ 4.338] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[ 4.338] (==) modeset(G0): DPI set to (96, 96)
[ 4.338] (II) Loading sub module "fb"
[ 4.338] (II) LoadModule: "fb"
[ 4.338] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 4.338] (II) Module fb: vendor="X.Org Foundation"
[ 4.338] compiled for 1.20.9, module version = 1.0.0
[ 4.338] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4.338] (II) UnloadModule: "fbdev"
[ 4.338] (II) Unloading fbdev
[ 4.339] (II) UnloadSubModule: "fbdevhw"
[ 4.339] (II) Unloading fbdevhw
[ 4.339] (II) UnloadModule: "vesa"
[ 4.339] (II) Unloading vesa
[ 4.353] (==) modeset(0): Backing store enabled
[ 4.353] (==) modeset(0): Silken mouse enabled
[ 4.404] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[ 4.404] (==) modeset(0): DPMS enabled
[ 4.405] (II) modeset(0): [DRI2] Setup complete
[ 4.405] (II) modeset(0): [DRI2] DRI driver: iris
[ 4.405] (II) modeset(0): [DRI2] VDPAU driver: va_gl
[ 4.431] (==) modeset(G0): Backing store enabled
[ 4.431] (==) modeset(G0): Silken mouse enabled
[ 4.431] (II) modeset(G0): Initializing kms color map for depth 24, 8 bpc.
[ 4.431] (==) modeset(G0): DPMS enabled
[ 4.431] (II) modeset(G0): [DRI2] Setup complete
[ 4.431] (II) modeset(G0): [DRI2] DRI driver: nouveau
[ 4.431] (II) modeset(G0): [DRI2] VDPAU driver: nouveau
[ 4.431] (II) Initializing extension Generic Event Extension
[ 4.431] (II) Initializing extension SHAPE
[ 4.432] (II) Initializing extension MIT-SHM
[ 4.432] (II) Initializing extension XInputExtension
[ 4.432] (II) Initializing extension XTEST
[ 4.432] (II) Initializing extension BIG-REQUESTS
[ 4.433] (II) Initializing extension SYNC
[ 4.433] (II) Initializing extension XKEYBOARD
[ 4.433] (II) Initializing extension XC-MISC
[ 4.433] (II) Initializing extension SECURITY
[ 4.433] (II) Initializing extension XFIXES
[ 4.433] (II) Initializing extension RENDER
[ 4.434] (II) Initializing extension RANDR
[ 4.434] (II) Initializing extension COMPOSITE
[ 4.434] (II) Initializing extension DAMAGE
[ 4.434] (II) Initializing extension MIT-SCREEN-SAVER
[ 4.434] (II) Initializing extension DOUBLE-BUFFER
[ 4.435] (II) Initializing extension RECORD
[ 4.435] (II) Initializing extension DPMS
[ 4.435] (II) Initializing extension Present
[ 4.435] (II) Initializing extension DRI3
[ 4.435] (II) Initializing extension X-Resource
[ 4.435] (II) Initializing extension XVideo
[ 4.436] (II) Initializing extension XVideo-MotionCompensation
[ 4.436] (II) Initializing extension SELinux
[ 4.436] (II) SELinux: Disabled on system
[ 4.436] (II) Initializing extension GLX
[ 4.450] (II) AIGLX: Loaded and initialized iris
[ 4.450] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 4.450] (II) Initializing extension XFree86-VidModeExtension
[ 4.450] (II) Initializing extension XFree86-DGA
[ 4.450] (II) Initializing extension XFree86-DRI
[ 4.450] (II) Initializing extension DRI2
[ 4.453] (II) modeset(G0): Damage tracking initialized
[ 4.458] (II) modeset(0): Damage tracking initialized
[ 4.458] (II) modeset(0): Setting screen physical size to 508 x 285
[ 4.500] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 4.500] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 4.500] (II) LoadModule: "libinput"
[ 4.500] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 4.503] (II) Module libinput: vendor="X.Org Foundation"
[ 4.503] compiled for 1.20.4, module version = 0.29.0
[ 4.503] Module class: X.Org XInput Driver
[ 4.503] ABI class: X.Org XInput driver, version 24.1
[ 4.503] (II) Using input driver 'libinput' for 'Power Button'
[ 4.503] (**) Power Button: always reports core events
[ 4.503] (**) Option "Device" "/dev/input/event3"
[ 4.503] (**) Option "_source" "server/udev"
[ 4.506] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 4.506] (II) event3 - Power Button: device is a keyboard
[ 4.506] (II) event3 - Power Button: device removed
[ 4.535] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 4.535] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 4.535] (**) Option "xkb_model" "pc105"
[ 4.535] (**) Option "xkb_layout" "pl"
[ 4.581] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 4.582] (II) event3 - Power Button: device is a keyboard
[ 4.583] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 4.583] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 4.583] (II) Using input driver 'libinput' for 'Video Bus'
[ 4.583] (**) Video Bus: always reports core events
[ 4.583] (**) Option "Device" "/dev/input/event6"
[ 4.583] (**) Option "_source" "server/udev"
[ 4.586] (II) event6 - Video Bus: is tagged by udev as: Keyboard
[ 4.586] (II) event6 - Video Bus: device is a keyboard
[ 4.586] (II) event6 - Video Bus: device removed
[ 4.603] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input8/event6"
[ 4.603] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 4.603] (**) Option "xkb_model" "pc105"
[ 4.603] (**) Option "xkb_layout" "pl"
[ 4.606] (II) event6 - Video Bus: is tagged by udev as: Keyboard
[ 4.606] (II) event6 - Video Bus: device is a keyboard
[ 4.608] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 4.608] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 4.608] (II) Using input driver 'libinput' for 'Video Bus'
[ 4.608] (**) Video Bus: always reports core events
[ 4.608] (**) Option "Device" "/dev/input/event5"
[ 4.608] (**) Option "_source" "server/udev"
[ 4.611] (II) event5 - Video Bus: is tagged by udev as: Keyboard
[ 4.611] (II) event5 - Video Bus: device is a keyboard
[ 4.611] (II) event5 - Video Bus: device removed
[ 4.635] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input7/event5"
[ 4.635] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 4.635] (**) Option "xkb_model" "pc105"
[ 4.635] (**) Option "xkb_layout" "pl"
[ 4.639] (II) event5 - Video Bus: is tagged by udev as: Keyboard
[ 4.639] (II) event5 - Video Bus: device is a keyboard
[ 4.640] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 4.640] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 4.640] (II) Using input driver 'libinput' for 'Power Button'
[ 4.640] (**) Power Button: always reports core events
[ 4.640] (**) Option "Device" "/dev/input/event1"
[ 4.640] (**) Option "_source" "server/udev"
[ 4.642] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 4.642] (II) event1 - Power Button: device is a keyboard
[ 4.643] (II) event1 - Power Button: device removed
[ 4.667] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 4.667] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 4.667] (**) Option "xkb_model" "pc105"
[ 4.667] (**) Option "xkb_layout" "pl"
[ 4.670] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 4.670] (II) event1 - Power Button: device is a keyboard
[ 4.671] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 4.671] (II) No input driver specified, ignoring this device.
[ 4.671] (II) This device may have been added with another device file.
[ 4.672] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 4.672] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 4.672] (II) Using input driver 'libinput' for 'Sleep Button'
[ 4.672] (**) Sleep Button: always reports core events
[ 4.672] (**) Option "Device" "/dev/input/event2"
[ 4.673] (**) Option "_source" "server/udev"
[ 4.675] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 4.675] (II) event2 - Sleep Button: device is a keyboard
[ 4.675] (II) event2 - Sleep Button: device removed
[ 4.695] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[ 4.695] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[ 4.695] (**) Option "xkb_model" "pc105"
[ 4.695] (**) Option "xkb_layout" "pl"
[ 4.698] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 4.698] (II) event2 - Sleep Button: device is a keyboard
[ 4.701] (II) config/udev: Adding input device 2.4G Mouse (/dev/input/event7)
[ 4.701] (**) 2.4G Mouse: Applying InputClass "libinput keyboard catchall"
[ 4.701] (II) Using input driver 'libinput' for '2.4G Mouse'
[ 4.701] (**) 2.4G Mouse: always reports core events
[ 4.701] (**) Option "Device" "/dev/input/event7"
[ 4.701] (**) Option "_source" "server/udev"
[ 4.719] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:1EA7:0066.0001/input/input9/event7"
[ 4.719] (II) XINPUT: Adding extended input device "2.4G Mouse" (type: KEYBOARD, id 11)
[ 4.719] (**) Option "xkb_model" "pc105"
[ 4.719] (**) Option "xkb_layout" "pl"
[ 4.726] (II) config/udev: Adding input device 2.4G Mouse (/dev/input/event8)
[ 4.726] (II) No input driver specified, ignoring this device.
[ 4.726] (II) This device may have been added with another device file.
[ 4.728] (II) config/udev: Adding input device 2.4G Mouse (/dev/input/event9)
[ 4.728] (**) 2.4G Mouse: Applying InputClass "libinput pointer catchall"
[ 4.728] (II) Using input driver 'libinput' for '2.4G Mouse'
[ 4.728] (**) 2.4G Mouse: always reports core events
[ 4.728] (**) Option "Device" "/dev/input/event9"
[ 4.728] (**) Option "_source" "server/udev"
[ 4.732] (II) event9 - 2.4G Mouse: is tagged by udev as: Mouse
[ 4.732] (II) event9 - 2.4G Mouse: device is a pointer
[ 4.732] (II) event9 - 2.4G Mouse: device removed
[ 4.795] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:1EA7:0066.0002/input/input11/event9"
[ 4.795] (II) XINPUT: Adding extended input device "2.4G Mouse" (type: MOUSE, id 12)
[ 4.796] (**) Option "AccelerationScheme" "none"
[ 4.796] (**) 2.4G Mouse: (accel) selected scheme none/0
[ 4.796] (**) 2.4G Mouse: (accel) acceleration factor: 2.000
[ 4.796] (**) 2.4G Mouse: (accel) acceleration threshold: 4
[ 4.799] (II) event9 - 2.4G Mouse: is tagged by udev as: Mouse
[ 4.800] (II) event9 - 2.4G Mouse: device is a pointer
[ 4.802] (II) config/udev: Adding input device 2.4G Mouse (/dev/input/mouse0)
[ 4.802] (II) No input driver specified, ignoring this device.
[ 4.802] (II) This device may have been added with another device file.
[ 4.804] (II) config/udev: Adding input device 2.4G Mouse Consumer Control (/dev/input/event10)
[ 4.804] (**) 2.4G Mouse Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 4.804] (II) Using input driver 'libinput' for '2.4G Mouse Consumer Control'
[ 4.804] (**) 2.4G Mouse Consumer Control: always reports core events
[ 4.804] (**) Option "Device" "/dev/input/event10"
[ 4.804] (**) Option "_source" "server/udev"
[ 4.827] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:1EA7:0066.0002/input/input12/event10"
[ 4.834] (**) Option "Device" "/dev/input/event11"
[ 4.834] (**) Option "_source" "server/udev"
[ 4.875] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:1EA7:0066.0002/input/input13/event11"
[ 4.875] (II) XINPUT: Adding extended input device "2.4G Mouse System Control" (type: KEYBOARD, id 14)
[ 4.875] (**) Option "xkb_model" "pc105"
[ 4.875] (**) Option "xkb_layout" "pl"
[ 4.881] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event13)
[ 4.881] (**) Ideapad extra buttons: Applying InputClass "libinput keyboard catchall"
[ 4.881] (II) Using input driver 'libinput' for 'Ideapad extra buttons'
[ 4.881] (**) Ideapad extra buttons: always reports core events
[ 4.881] (**) Option "Device" "/dev/input/event13"
[ 4.881] (**) Option "_source" "server/udev"
[ 4.899] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input15/event13"
[ 4.899] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 15)
[ 4.899] (**) Option "xkb_model" "pc105"
[ 4.899] (**) Option "xkb_layout" "pl"
[ 4.902] (II) event13 - Ideapad extra buttons: is tagged by udev as: Keyboard
[ 4.902] (II) event13 - Ideapad extra buttons: device is a keyboard
[ 4.903] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event14)
[ 4.903] (II) No input driver specified, ignoring this device.
[ 4.903] (II) This device may have been added with another device file.
[ 4.904] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event15)
[ 4.904] (II) No input driver specified, ignoring this device.
[ 4.904] (II) This device may have been added with another device file.
[ 4.905] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event16)
[ 4.905] (II) No input driver specified, ignoring this device.
[ 4.905] (II) This device may have been added with another device file.
[ 4.906] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event17)
[ 4.906] (II) No input driver specified, ignoring this device.
[ 4.906] (II) This device may have been added with another device file.
[ 4.907] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event18)
[ 4.907] (II) No input driver specified, ignoring this device.
[ 4.907] (II) This device may have been added with another device file.
[ 4.908] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event19)
[ 4.908] (II) No input driver specified, ignoring this device.
[ 4.908] (II) This device may have been added with another device file.
[ 4.909] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=10 (/dev/input/event20)
[ 4.909] (II) No input driver specified, ignoring this device.
[ 4.909] (II) This device may have been added with another device file.
[ 4.910] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 4.910] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 4.910] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 4.910] (**) AT Translated Set 2 keyboard: always reports core events
[ 4.911] (**) Option "Device" "/dev/input/event4"
[ 4.911] (**) Option "_source" "server/udev"
[ 4.913] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 4.913] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 4.915] (II) event4 - AT Translated Set 2 keyboard: device removed
[ 4.943] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 4.943] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 16)
[ 4.943] (**) Option "xkb_model" "pc105"
[ 4.943] (**) Option "xkb_layout" "pl"
[ 4.946] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 4.946] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 4.949] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event12)
[ 4.949] (**) ETPS/2 Elantech Touchpad: Applying InputClass "libinput touchpad catchall"
[ 4.949] (II) Using input driver 'libinput' for 'ETPS/2 Elantech Touchpad'
[ 4.949] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 4.949] (**) Option "Device" "/dev/input/event12"
[ 4.949] (**) Option "_source" "server/udev"
[ 4.983] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event12"
[ 4.984] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 17)
[ 4.985] (**) Option "AccelerationScheme" "none"
[ 4.986] (**) ETPS/2 Elantech Touchpad: (accel) selected scheme none/0
[ 4.986] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 4.986] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 4.988] (II) event12 - ETPS/2 Elantech Touchpad: is tagged by udev as: Touchpad
[ 4.991] (II) event12 - ETPS/2 Elantech Touchpad: device is a touchpad
[ 4.992] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[ 4.992] (II) No input driver specified, ignoring this device.
[ 4.992] (II) This device may have been added with another device file.
[ 5.022] (**) 2.4G Mouse Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 5.022] (II) Using input driver 'libinput' for '2.4G Mouse Consumer Control'
[ 5.022] (**) 2.4G Mouse Consumer Control: always reports core events
[ 5.022] (**) Option "Device" "/dev/input/event10"
[ 5.022] (**) Option "_source" "_driver/libinput"
[ 5.022] (II) libinput: 2.4G Mouse Consumer Control: is a virtual subdevice
[ 5.022] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:1EA7:0066.0002/input/input12/event10"
[ 5.022] (II) XINPUT: Adding extended input device "2.4G Mouse Consumer Control" (type: KEYBOARD, id 18)
[ 5.022] (**) Option "xkb_model" "pc105"
[ 5.022] (**) Option "xkb_layout" "pl"
[ 5.073] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event18)
[ 5.074] (II) No input driver specified, ignoring this device.
[ 5.074] (II) This device may have been added with another device file.
[ 5.074] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event19)
[ 5.074] (II) No input driver specified, ignoring this device.
[ 5.074] (II) This device may have been added with another device file.
[ 5.075] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event14)
[ 5.075] (II) No input driver specified, ignoring this device.
[ 5.075] (II) This device may have been added with another device file.
[ 5.076] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event16)
[ 5.076] (II) No input driver specified, ignoring this device.
[ 5.076] (II) This device may have been added with another device file.
[ 5.076] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event15)
[ 5.076] (II) No input driver specified, ignoring this device.
[ 5.076] (II) This device may have been added with another device file.
[ 5.077] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=10 (/dev/input/event20)
[ 5.077] (II) No input driver specified, ignoring this device.
[ 5.077] (II) This device may have been added with another device file.
[ 5.078] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event17)
[ 5.078] (II) No input driver specified, ignoring this device.
[ 5.078] (II) This device may have been added with another device file.
[ 20.329] (II) modeset(0): EDID vendor "SDC", prod id 14162
[ 20.329] (II) modeset(0): Printing DDC gathered Modelines:
[ 20.329] (II) modeset(0): Modeline "1920x1080"x0.0 142.90 1920 1968 2000 2082 1080 1082 1087 1144 -hsync -vsync (68.6 kHz eP)
[ 21.022] (II) modeset(0): EDID vendor "SDC", prod id 14162
[ 21.022] (II) modeset(0): Printing DDC gathered Modelines:
[ 21.022] (II) modeset(0): Modeline "1920x1080"x0.0 142.90 1920 1968 2000 2082 1080 1082 1087 1144 -hsync -vsync (68.6 kHz eP)
[ 5339.161] (II) modeset(0): EDID vendor "SDC", prod id 14162
[ 5339.161] (II) modeset(0): Printing DDC gathered Modelines:
[ 5339.161] (II) modeset(0): Modeline "1920x1080"x0.0 142.90 1920 1968 2000 2082 1080 1082 1087 1144 -hsync -vsync (68.6 kHz eP)
[ 5569.928] (II) modeset(0): EDID vendor "SDC", prod id 14162
[ 5569.928] (II) modeset(0): Printing DDC gathered Modelines:
[ 5569.928] (II) modeset(0): Modeline "1920x1080"x0.0 142.90 1920 1968 2000 2082 1080 1082 1087 1144 -hsync -vsync (68.6 kHz eP)
A tutaj Xorg.1.log.
Kod: [ 786.305]
X.Org X Server 1.20.9
X Protocol Version 11, Revision 0
[ 786.305] Build Operating System: Linux 4.15.0-130-generic x86_64 Ubuntu
[ 786.305] Current Operating System: Linux laptop1-Lenovo-ideapad-Y700-15ISK 5.4.0-65-generic #73-Ubuntu SMP Mon Jan 18 17:25:17 UTC 2021 x86_64
[ 786.305] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-65-generic root=UUID=d836c93a-b67a-4ab0-a693-5319cf6468f3 ro quiet splash
[ 786.305] Build Date: 17 January 2021 09:13:31AM
[ 786.305] xorg-server 2:1.20.9-2ubuntu1.2~20.04.1 (For technical support please see http://www.ubuntu.com/support)
[ 786.305] Current version of pixman: 0.38.4
[ 786.305] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 786.305] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 786.305] (==) Log file: "/var/log/Xorg.1.log", Time: Tue Feb 9 17:52:58 2021
[ 786.306] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 786.306] (==) No Layout section. Using the first Screen section.
[ 786.306] (==) No screen section available. Using defaults.
[ 786.306] (**) |-->Screen "Default Screen Section" (0)
[ 786.306] (**) | |-->Monitor "<default monitor>"
[ 786.307] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 786.307] (==) Automatically adding devices
[ 786.307] (==) Automatically enabling devices
[ 786.307] (==) Automatically adding GPU devices
[ 786.307] (==) Automatically binding GPU devices
[ 786.307] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 786.307] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 786.307] Entry deleted from font path.
[ 786.307] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 786.307] Entry deleted from font path.
[ 786.307] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 786.307] Entry deleted from font path.
[ 786.307] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 786.307] Entry deleted from font path.
[ 786.307] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 786.307] Entry deleted from font path.
[ 786.307] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 786.307] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 786.307] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 786.307] (II) Loader magic: 0x55a715d68020
[ 786.307] (II) Module ABI versions:
[ 786.307] X.Org ANSI C Emulation: 0.4
[ 786.307] X.Org Video Driver: 24.1
[ 786.307] X.Org XInput driver : 24.1
[ 786.307] X.Org Server Extension : 10.0
[ 786.308] (++) using VT number 8
[ 786.308] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 786.309] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 786.309] (EE) /dev/dri/card1: failed to set DRM interface version 1.4: Permission denied
[ 786.309] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 786.309] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[ 786.312] (--) PCI:*(0@0:2:0) 8086:191b:17aa:3802 rev 6, Mem @ 0x92000000/16777216, 0xa0000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[ 786.312] (--) PCI: (1@0:0:0) 10de:139b:17aa:3802 rev 162, Mem @ 0x93000000/16777216, 0x80000000/268435456, 0x90000000/33554432, I/O @ 0x00004000/128
[ 786.312] (II) LoadModule: "glx"
[ 786.312] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 786.313] (II) Module glx: vendor="X.Org Foundation"
[ 786.313] compiled for 1.20.9, module version = 1.0.0
[ 786.313] ABI class: X.Org Server Extension, version 10.0
[ 786.313] (==) Matched modesetting as autoconfigured driver 0
[ 786.313] (==) Matched fbdev as autoconfigured driver 1
[ 786.313] (==) Matched vesa as autoconfigured driver 2
[ 786.313] (==) Assigned the driver to the xf86ConfigLayout
[ 786.313] (II) LoadModule: "modesetting"
[ 786.313] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 786.313] (II) Module modesetting: vendor="X.Org Foundation"
[ 786.313] compiled for 1.20.9, module version = 1.20.9
[ 786.313] Module class: X.Org Video Driver
[ 786.313] ABI class: X.Org Video Driver, version 24.1
[ 786.313] (II) LoadModule: "fbdev"
[ 786.314] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 786.314] (II) Module fbdev: vendor="X.Org Foundation"
[ 786.314] compiled for 1.20.1, module version = 0.5.0
[ 786.314] Module class: X.Org Video Driver
[ 786.314] ABI class: X.Org Video Driver, version 24.0
[ 786.314] (II) LoadModule: "vesa"
[ 786.314] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 786.314] (II) Module vesa: vendor="X.Org Foundation"
[ 786.314] compiled for 1.20.4, module version = 2.4.0
[ 786.314] Module class: X.Org Video Driver
[ 786.314] ABI class: X.Org Video Driver, version 24.0
[ 786.314] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 786.314] (II) FBDEV: driver for framebuffer: fbdev
[ 786.314] (II) VESA: driver for VESA chipsets: vesa
[ 786.947] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[ 786.948] (**) modeset(0): claimed PCI slot 0@0:2:0
[ 786.948] (II) modeset(0): using default device
[ 786.948] (WW) Falling back to old probe method for fbdev
[ 786.948] (II) Loading sub module "fbdevhw"
[ 786.948] (II) LoadModule: "fbdevhw"
[ 786.948] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 786.948] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 786.948] compiled for 1.20.9, module version = 0.0.2
[ 786.948] ABI class: X.Org Video Driver, version 24.1
[ 786.948] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 786.948] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 786.949] (==) modeset(0): RGB weight 888
[ 786.949] (==) modeset(0): Default visual is TrueColor
[ 786.949] (II) Loading sub module "glamoregl"
[ 786.949] (II) LoadModule: "glamoregl"
[ 786.949] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 786.954] (II) Module glamoregl: vendor="X.Org Foundation"
[ 786.954] compiled for 1.20.9, module version = 1.0.1
[ 786.954] ABI class: X.Org ANSI C Emulation, version 0.4
[ 786.985] (II) modeset(0): glamor X acceleration enabled on Mesa Intel(R) HD Graphics 530 (SKL GT2)
[ 786.985] (II) modeset(0): glamor initialized
[ 786.986] (II) modeset(0): Output eDP-1 has no monitor section
[ 786.993] (II) modeset(0): Output HDMI-1 has no monitor section
[ 786.994] (II) modeset(0): EDID for output eDP-1
[ 786.994] (II) modeset(0): Manufacturer: SDC Model: 3752 Serial#: 0
[ 786.994] (II) modeset(0): Year: 2014 Week: 0
[ 786.994] (II) modeset(0): EDID Version: 1.4
[ 786.994] (II) modeset(0): Digital Display Input
[ 786.994] (II) modeset(0): 6 bits per channel
[ 786.994] (II) modeset(0): Digital interface is DisplayPort
[ 786.994] (II) modeset(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 786.994] (II) modeset(0): Gamma: 2.20
[ 786.994] (II) modeset(0): No DPMS capabilities specified
[ 786.994] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 786.994] (II) modeset(0): First detailed timing is preferred mode
[ 786.994] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[ 786.994] (II) modeset(0): redX: 0.635 redY: 0.335 greenX: 0.295 greenY: 0.610
[ 786.994] (II) modeset(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 786.994] (II) modeset(0): Manufacturer's mask: 0
[ 786.994] (II) modeset(0): Supported detailed timing:
[ 786.994] (II) modeset(0): clock: 142.9 MHz Image Size: 344 x 194 mm
[ 786.994] (II) modeset(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2082 h_border: 0
[ 786.994] (II) modeset(0): v_active: 1080 v_sync: 1082 v_sync_end 1087 v_blanking: 1144 v_border: 0
[ 786.994] (II) modeset(0): Unknown vendor-specific block f
[ 786.994] (II) modeset(0): SAMSUNG
[ 786.994] (II) modeset(0): LTN156HL09401
[ 786.994] (II) modeset(0): EDID (in hex):
[ 786.994] (II) modeset(0): 00ffffffffffff004c83523700000000
[ 786.994] (II) modeset(0): 00180104952213780ab995a2554b9c26
[ 786.994] (II) modeset(0): 0f505400000001010101010101010101
[ 786.994] (II) modeset(0): 010101010101d23780a2703840403020
[ 786.994] (II) modeset(0): 250058c2100000190000000f00000000
[ 786.994] (II) modeset(0): 00000000001e82105200000000fe0053
[ 786.994] (II) modeset(0): 414d53554e470a204c83484c000000fe
[ 786.994] (II) modeset(0): 004c544e313536484c30393430310051
[ 787.001] (II) modeset(0): EDID for output HDMI-1
[ 787.001] (II) modeset(0): Output eDP-1 connected
[ 787.001] (II) modeset(0): Output HDMI-1 disconnected
[ 787.001] (II) modeset(0): Using exact sizes for initial modes
[ 787.001] (II) modeset(0): Output eDP-1 using initial mode 1920x1080 +0+0
[ 787.001] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 787.001] (==) modeset(0): DPI set to (96, 96)
[ 787.001] (II) Loading sub module "fb"
[ 787.001] (II) LoadModule: "fb"
[ 787.001] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 787.001] (II) Module fb: vendor="X.Org Foundation"
[ 787.001] compiled for 1.20.9, module version = 1.0.0
[ 787.001] ABI class: X.Org ANSI C Emulation, version 0.4
[ 787.001] (II) UnloadModule: "fbdev"
[ 787.001] (II) Unloading fbdev
[ 787.001] (II) UnloadSubModule: "fbdevhw"
[ 787.001] (II) Unloading fbdevhw
[ 787.001] (II) UnloadModule: "vesa"
[ 787.001] (II) Unloading vesa
[ 787.009] (==) modeset(0): Backing store enabled
[ 787.009] (==) modeset(0): Silken mouse enabled
[ 787.070] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[ 787.070] (==) modeset(0): DPMS enabled
[ 787.070] (II) modeset(0): [DRI2] Setup complete
[ 787.070] (II) modeset(0): [DRI2] DRI driver: iris
[ 787.070] (II) modeset(0): [DRI2] VDPAU driver: va_gl
[ 787.070] (II) Initializing extension Generic Event Extension
[ 787.071] (II) Initializing extension SHAPE
[ 787.071] (II) Initializing extension MIT-SHM
[ 787.071] (II) Initializing extension XInputExtension
[ 787.072] (II) Initializing extension XTEST
[ 787.072] (II) Initializing extension BIG-REQUESTS
[ 787.072] (II) Initializing extension SYNC
[ 787.073] (II) Initializing extension XKEYBOARD
[ 787.073] (II) Initializing extension XC-MISC
[ 787.073] (II) Initializing extension SECURITY
[ 787.074] (II) Initializing extension XFIXES
[ 787.074] (II) Initializing extension RENDER
[ 787.074] (II) Initializing extension RANDR
[ 787.075] (II) Initializing extension COMPOSITE
[ 787.075] (II) Initializing extension DAMAGE
[ 787.076] (II) Initializing extension MIT-SCREEN-SAVER
[ 787.076] (II) Initializing extension DOUBLE-BUFFER
[ 787.076] (II) Initializing extension RECORD
[ 787.077] (II) Initializing extension DPMS
[ 787.077] (II) Initializing extension Present
[ 787.077] (II) Initializing extension DRI3
[ 787.078] (II) Initializing extension X-Resource
[ 787.078] (II) Initializing extension XVideo
[ 787.078] (II) Initializing extension XVideo-MotionCompensation
[ 787.078] (II) Initializing extension SELinux
[ 787.078] (II) SELinux: Disabled on system
[ 787.078] (II) Initializing extension GLX
[ 787.104] (II) AIGLX: Loaded and initialized iris
[ 787.104] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 787.104] (II) Initializing extension XFree86-VidModeExtension
[ 787.104] (II) Initializing extension XFree86-DGA
[ 787.104] (II) Initializing extension XFree86-DRI
[ 787.104] (II) Initializing extension DRI2
[ 787.106] (II) modeset(0): Damage tracking initialized
[ 787.106] (II) modeset(0): Setting screen physical size to 508 x 285
[ 787.140] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 787.140] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 787.140] (II) LoadModule: "libinput"
[ 787.141] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 787.142] (II) Module libinput: vendor="X.Org Foundation"
[ 787.142] compiled for 1.20.4, module version = 0.29.0
[ 787.142] Module class: X.Org XInput Driver
[ 787.142] ABI class: X.Org XInput driver, version 24.1
[ 787.142] (II) Using input driver 'libinput' for 'Power Button'
[ 787.142] (**) Power Button: always reports core events
[ 787.142] (**) Option "Device" "/dev/input/event3"
[ 787.142] (**) Option "_source" "server/udev"
[ 787.143] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 787.143] (II) event3 - Power Button: device is a keyboard
[ 787.143] (II) event3 - Power Button: device removed
[ 787.169] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 787.169] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 787.169] (**) Option "xkb_model" "pc105"
[ 787.169] (**) Option "xkb_layout" "pl"
[ 787.182] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 787.182] (II) event3 - Power Button: device is a keyboard
[ 787.183] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 787.183] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 787.183] (II) Using input driver 'libinput' for 'Video Bus'
[ 787.183] (**) Video Bus: always reports core events
[ 787.183] (**) Option "Device" "/dev/input/event6"
[ 787.183] (**) Option "_source" "server/udev"
[ 787.184] (II) event6 - Video Bus: is tagged by udev as: Keyboard
[ 787.184] (II) event6 - Video Bus: device is a keyboard
[ 787.184] (II) event6 - Video Bus: device removed
[ 787.201] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input8/event6"
[ 787.201] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 787.201] (**) Option "xkb_model" "pc105"
[ 787.201] (**) Option "xkb_layout" "pl"
[ 787.203] (II) event6 - Video Bus: is tagged by udev as: Keyboard
[ 787.203] (II) event6 - Video Bus: device is a keyboard
[ 787.204] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 787.204] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 787.204] (II) Using input driver 'libinput' for 'Video Bus'
[ 787.204] (**) Video Bus: always reports core events
[ 787.204] (**) Option "Device" "/dev/input/event5"
[ 787.204] (**) Option "_source" "server/udev"
[ 787.206] (II) event5 - Video Bus: is tagged by udev as: Keyboard
[ 787.206] (II) event5 - Video Bus: device is a keyboard
[ 787.206] (II) event5 - Video Bus: device removed
[ 787.237] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input7/event5"
[ 787.237] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 787.237] (**) Option "xkb_model" "pc105"
[ 787.237] (**) Option "xkb_layout" "pl"
[ 787.241] (II) event5 - Video Bus: is tagged by udev as: Keyboard
[ 787.241] (II) event5 - Video Bus: device is a keyboard
[ 787.243] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 787.243] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 787.243] (II) Using input driver 'libinput' for 'Power Button'
[ 787.243] (**) Power Button: always reports core events
[ 787.243] (**) Option "Device" "/dev/input/event1"
[ 787.243] (**) Option "_source" "server/udev"
[ 787.245] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 787.245] (II) event1 - Power Button: device is a keyboard
[ 787.245] (II) event1 - Power Button: device removed
[ 787.269] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 787.269] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 787.269] (**) Option "xkb_model" "pc105"
[ 787.269] (**) Option "xkb_layout" "pl"
[ 787.272] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 787.272] (II) event1 - Power Button: device is a keyboard
[ 787.274] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 787.274] (II) No input driver specified, ignoring this device.
[ 787.274] (II) This device may have been added with another device file.
[ 787.275] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 787.275] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 787.275] (II) Using input driver 'libinput' for 'Sleep Button'
[ 787.275] (**) Sleep Button: always reports core events
[ 787.275] (**) Option "Device" "/dev/input/event2"
[ 787.275] (**) Option "_source" "server/udev"
[ 787.277] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 787.278] (II) event2 - Sleep Button: device is a keyboard
[ 787.278] (II) event2 - Sleep Button: device removed
[ 787.301] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[ 787.301] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[ 787.301] (**) Option "xkb_model" "pc105"
[ 787.301] (**) Option "xkb_layout" "pl"
[ 787.304] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 787.304] (II) event2 - Sleep Button: device is a keyboard
[ 787.305] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 787.305] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 787.305] (II) LoadModule: "modesetting"
[ 787.306] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 787.306] (II) Module modesetting: vendor="X.Org Foundation"
[ 787.306] compiled for 1.20.9, module version = 1.20.9
[ 787.306] Module class: X.Org Video Driver
[ 787.306] ABI class: X.Org Video Driver, version 24.1
[ 787.306] (II) UnloadModule: "modesetting"
[ 787.306] (II) Unloading modesetting
[ 787.306] (II) Failed to load module "modesetting" (already loaded, 0)
[ 787.306] (II) modeset(G0): using drv /dev/dri/card1
[ 787.306] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[ 787.306] (==) modeset(G0): RGB weight 888
[ 787.306] (==) modeset(G0): Default visual is TrueColor
[ 787.306] (II) Loading sub module "glamoregl"
[ 787.306] (II) LoadModule: "glamoregl"
[ 787.307] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 787.307] (II) Module glamoregl: vendor="X.Org Foundation"
[ 787.307] compiled for 1.20.9, module version = 1.0.1
[ 787.307] ABI class: X.Org ANSI C Emulation, version 0.4
[ 787.328] (II) modeset(G0): glamor X acceleration enabled on NV117
[ 787.328] (II) modeset(G0): glamor initialized
[ 787.328] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[ 787.328] (==) modeset(G0): DPI set to (96, 96)
[ 787.328] (II) Loading sub module "fb"
[ 787.328] (II) LoadModule: "fb"
[ 787.329] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 787.329] (II) Module fb: vendor="X.Org Foundation"
[ 787.329] compiled for 1.20.9, module version = 1.0.0
[ 787.329] ABI class: X.Org ANSI C Emulation, version 0.4
[ 787.347] (==) modeset(G0): Backing store enabled
[ 787.347] (==) modeset(G0): Silken mouse enabled
[ 787.347] (II) modeset(G0): Initializing kms color map for depth 24, 8 bpc.
[ 787.347] (==) modeset(G0): DPMS enabled
[ 787.347] (II) modeset(G0): [DRI2] Setup complete
[ 787.347] (II) modeset(G0): [DRI2] DRI driver: nouveau
[ 787.347] (II) modeset(G0): [DRI2] VDPAU driver: nouveau
[ 787.348] (II) modeset(G0): Damage tracking initialized
[ 787.348] xf86: found device 1
[ 787.349] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 787.349] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 787.349] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[ 787.349] (II) config/udev: Adding input device 2.4G Mouse (/dev/input/event7)
[ 787.349] (II) Using input driver 'libinput' for '2.4G Mouse'
[ 787.349] (**) Option "Device" "/dev/input/event7"
[ 787.349] (**) Option "_source" "server/udev"
[ 787.373] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:1EA7:0066.0001/input/input9/event7"
[ 787.373] (II) XINPUT: Adding extended input device "2.4G Mouse" (type: KEYBOARD, id 11)
[ 787.373] (**) Option "xkb_model" "pc105"
[ 787.373] (**) Option "xkb_layout" "pl"
[ 787.375] (II) config/udev: Adding input device 2.4G Mouse (/dev/input/event8)
[ 787.375] (II) No input driver specified, ignoring this device.
[ 787.375] (II) This device may have been added with another device file.
[ 787.375] (II) config/udev: Adding input device 2.4G Mouse (/dev/input/event9)
[ 787.375] (II) Using input driver 'libinput' for '2.4G Mouse'
[ 787.375] (**) Option "Device" "/dev/input/event9"
[ 787.375] (**) Option "_source" "server/udev"
[ 787.421] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:1EA7:0066.0002/input/input11/event9"
[ 787.421] (II) XINPUT: Adding extended input device "2.4G Mouse" (type: MOUSE, id 12)
[ 787.421] (**) Option "AccelerationScheme" "none"
[ 787.421] (**) 2.4G Mouse: (accel) selected scheme none/0
[ 787.425] (II) No input driver specified, ignoring this device.
[ 787.425] (II) This device may have been added with another device file.
[ 787.427] (**) Option "Device" "/dev/input/event10"
[ 787.427] (**) Option "_source" "server/udev"
[ 787.445] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:1EA7:0066.0002/input/input12/event10"
[ 787.445] (II) XINPUT: Adding extended input device "2.4G Mouse Consumer Control" (type: MOUSE, id 13)
[ 787.446] (**) Option "AccelerationScheme" "none"
[ 787.453] (II) config/udev: Adding input device 2.4G Mouse System Control (/dev/input/event11)
[ 787.453] (**) 2.4G Mouse System Control: Applying InputClass "libinput keyboard catchall"
[ 787.453] (II) Using input driver 'libinput' for '2.4G Mouse System Control'
[ 787.453] (**) 2.4G Mouse System Control: always reports core events
[ 787.453] (**) Option "Device" "/dev/input/event11"
[ 787.453] (**) Option "_source" "server/udev"
[ 787.473] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:1EA7:0066.0002/input/input13/event11"
[ 787.473] (II) XINPUT: Adding extended input device "2.4G Mouse System Control" (type: KEYBOARD, id 14)
[ 787.473] (**) Option "xkb_model" "pc105"
[ 787.473] (**) Option "xkb_layout" "pl"
[ 787.480] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event13)
[ 787.480] (**) Ideapad extra buttons: Applying InputClass "libinput keyboard catchall"
[ 787.480] (II) Using input driver 'libinput' for 'Ideapad extra buttons'
[ 787.480] (**) Ideapad extra buttons: always reports core events
[ 787.480] (**) Option "Device" "/dev/input/event13"
[ 787.480] (**) Option "_source" "server/udev"
[ 787.505] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input15/event13"
[ 787.505] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 15)
[ 787.505] (**) Option "xkb_model" "pc105"
[ 787.505] (**) Option "xkb_layout" "pl"
[ 787.508] (II) event13 - Ideapad extra buttons: is tagged by udev as: Keyboard
[ 787.509] (II) event13 - Ideapad extra buttons: device is a keyboard
[ 787.512] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event16)
[ 787.512] (II) No input driver specified, ignoring this device.
[ 787.512] (II) This device may have been added with another device file.
[ 787.513] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event17)
[ 787.513] (II) No input driver specified, ignoring this device.
[ 787.513] (II) This device may have been added with another device file.
[ 787.514] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event18)
[ 787.514] (II) No input driver specified, ignoring this device.
[ 787.514] (II) This device may have been added with another device file.
[ 787.515] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event19)
[ 787.515] (II) No input driver specified, ignoring this device.
[ 787.515] (II) This device may have been added with another device file.
[ 787.516] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=10 (/dev/input/event20)
[ 787.516] (II) No input driver specified, ignoring this device.
[ 787.516] (II) This device may have been added with another device file.
[ 787.518] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 787.518] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 787.518] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 787.518] (**) AT Translated Set 2 keyboard: always reports core events
[ 787.518] (**) Option "Device" "/dev/input/event4"
[ 787.518] (**) Option "_source" "server/udev"
[ 787.521] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 787.521] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 787.522] (II) event4 - AT Translated Set 2 keyboard: device removed
[ 787.537] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 787.537] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 16)
[ 787.537] (**) Option "xkb_model" "pc105"
[ 787.537] (**) Option "xkb_layout" "pl"
[ 787.540] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 787.540] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 787.543] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event12)
[ 787.543] (**) ETPS/2 Elantech Touchpad: Applying InputClass "libinput touchpad catchall"
[ 787.543] (II) Using input driver 'libinput' for 'ETPS/2 Elantech Touchpad'
[ 787.543] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 787.543] (**) Option "Device" "/dev/input/event12"
[ 787.543] (**) Option "_source" "server/udev"
[ 787.546] (II) event12 - ETPS/2 Elantech Touchpad: is tagged by udev as: Touchpad
[ 787.548] (II) event12 - ETPS/2 Elantech Touchpad: device is a touchpad
[ 787.548] (II) event12 - ETPS/2 Elantech Touchpad: device removed
[ 787.578] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event12"
[ 787.578] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 17)
[ 787.580] (**) Option "AccelerationScheme" "none"
[ 787.587] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[ 787.587] (II) No input driver specified, ignoring this device.
[ 787.587] (II) This device may have been added with another device file.
[ 787.620] (**) 2.4G Mouse Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 787.620] (II) Using input driver 'libinput' for '2.4G Mouse Consumer Control'
[ 787.620] (**) 2.4G Mouse Consumer Control: always reports core events
[ 787.620] (**) Option "Device" "/dev/input/event10"
[ 787.620] (**) Option "_source" "_driver/libinput"
[ 787.620] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:1EA7:0066.0002/input/input12/event10"
[ 787.620] (II) XINPUT: Adding extended input device "2.4G Mouse Consumer Control" (type: KEYBOARD, id 18)
[ 787.620] (**) Option "xkb_model" "pc105"
[ 787.620] (**) Option "xkb_layout" "pl"
[ 2217.257] (II) UnloadModule: "libinput"
[ 2217.505] (II) UnloadModule: "libinput"
[ 2223.240] (II) event3 - Power Button: device removed
[ 2223.269] (II) event6 - Video Bus: device removed
[ 2223.306] (II) event5 - Video Bus: device removed
[ 2223.329] (II) event1 - Power Button: device removed
[ 2223.345] (II) event2 - Sleep Button: device removed
[ 2223.361] (II) event13 - Ideapad extra buttons: device removed
[ 2223.377] (II) event4 - AT Translated Set 2 keyboard: device removed
[ 2223.393] (II) event12 - ETPS/2 Elantech Touchpad: device removed
[ 2223.425] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 2224.786] (II) UnloadModule: "libinput"
[ 2224.786] (II) UnloadModule: "libinput"
[ 2224.786] (II) UnloadModule: "libinput"
[ 2224.786] (II) UnloadModule: "libinput"
[ 2224.786] (II) UnloadModule: "libinput"
[ 2224.786] (II) UnloadModule: "libinput"
[ 2224.786] (II) UnloadModule: "libinput"
[ 2224.786] (II) UnloadModule: "libinput"
[ 2224.799] (II) Server terminated successfully (0). Closing log file.
Usunięte:
- Obsługiwane rozdzielczości, logi dotyczące myszy i klawiatury oraz przycisków systemowych.
|
|
|
|
| Uget |
|
Napisane przez: Gość - 09-02-2021, 18:58 - Forum: Software
- Brak odpowiedzi
|
|
Cześć,
Nie znalazłem - czy jest opcja w oknie czyszczenia zakończonych pobrań plików ?
Pozdrawiam.
|
|
|
|
| Samba - dysk montowany |
|
Napisane przez: Gość - 09-02-2021, 14:46 - Forum: Sieci
- Odpowiedzi (15)
|
|
Witam
Mam problemy uzyskanie dostepu do zawobow Linux (zasoby sa na dysku montowanym) na Linuxie MINT
mam dotep do dysku lokalnego
_____________________________________________________________________________________
Kod: #
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
# - When such options are commented with ";", the proposed setting
# differs from the default Samba behaviour
# - When commented with "#", the proposed setting is the default
# behaviour of Samba but the option is considered important
# enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.
#======================= Global Settings =======================
[global]
## Browsing/Identification ###
# Change this to the workgroup/NT-domain name your Samba server will part of
workgroup = WORKGROUP
# server string is the equivalent of the NT Description field
server string = %h server (Samba, Ubuntu)
#### Networking ####
# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
; interfaces = 127.0.0.0/8 eth0
# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself. However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
; bind interfaces only = yes
#### Debugging/Accounting ####
# This tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m
# Cap the size of the individual log files (in KiB).
max log size = 1000
# We want Samba to only log to /var/log/samba/log.{smbd,nmbd}.
# Append syslog@1 if you want important messages to be sent to syslog too.
logging = file
# Do something sensible when Samba crashes: mail the admin a backtrace
panic action = /usr/share/samba/panic-action %d
####### Authentication #######
# Server role. Defines in which mode Samba will operate. Possible
# values are "standalone server", "member server", "classic primary
# domain controller", "classic backup domain controller", "active
# directory domain controller".
#
# Most people will want "standalone server" or "member server".
# Running as "active directory domain controller" will require first
# running "samba-tool domain provision" to wipe databases and create a
# new domain.
server role = standalone server
obey pam restrictions = yes
# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
unix password sync = yes
# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<[email protected]> for
# sending the correct chat script for the passwd program in Debian Sarge).
passwd program = /usr/bin/passwd %u
passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
pam password change = yes
# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
map to guest = bad user
########## Domains ###########
#
# The following settings only takes effect if 'server role = primary
# classic domain controller', 'server role = backup domain controller'
# or 'domain logons' is set
#
# It specifies the location of the user's
# profile directory from the client point of view) The following
# required a [profiles] share to be setup on the samba server (see
# below)
; logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
# logon path = \\%N\%U\profile
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
; logon drive = H:
# logon home = \\%N\%U
# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
; logon script = logon.cmd
# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe. The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u
# This allows machine accounts to be created on the domain controller via the
# SAMR RPC pipe.
# The following assumes a "machines" group exists on the system
; add machine script = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u
# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.
; add group script = /usr/sbin/addgroup --force-badname %g
############ Misc ############
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /home/samba/etc/smb.conf.%m
# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
; idmap config * : backend = tdb
; idmap config * : range = 3000-7999
; idmap config YOURDOMAINHERE : backend = tdb
; idmap config YOURDOMAINHERE : range = 100000-999999
; template shell = /bin/bash
# Setup usershare options to enable non-root users to share folders
# with the net usershare command.
# Maximum number of usershare. 0 means that usershare is disabled.
# usershare max shares = 100
# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
usershare allow guests = yes
#======================= Share Definitions =======================
# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each
# user's home directory as \\server\username
;[homes]
; comment = Home Directories
; browseable = no
# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
; read only = yes
# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
; create mask = 0700
# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
; directory mask = 0700
# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.
# Un-comment the following parameter to make sure that only "username"
# can connect to \\server\username
# This might need tweaking when using external authentication schemes
; valid users = %S
# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
#-------------------------------------
;[netlogon]
; comment = Network Logon Service
; path = /home/samba/netlogon
; guest ok = yes
; read only = yes
# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
; comment = Users profiles
; path = /home/samba/profiles
; guest ok = no
; browseable = no
; create mask = 0600
; directory mask = 0700
[printers]
comment = All Printers
browseable = no
path = /var/spool/samba
printable = yes
guest ok = no
read only = yes
create mask = 0700
# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
comment = Printer Drivers
path = /var/lib/samba/printers
browseable = yes
read only = yes
guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
; write list = root, @lpadmin
# Set share configuration at the end
[Docs]
# dysk lokalny
path = /home/share
writable = yes
guest ok = yes
guest only = yes
create mode = 0777
directory mode = 0777
[udos1]
# dysk montowany
path = /media/ug/DaneLin/adam
writable = yes
guest ok = yes
guest only = yes
create mode = 0777
directory mode = 0777
[Linux_Ug_DaneB1]
comment = UG1
path = /media/DaneLin/Dane
create mask = 0777
directory mask = 0777
browsable = yes
writable = yes
guest ok = yes
#
po wykonaniu
Chmod 777 /media/ug/DaneLin/adam
Windows odpowiada ze nie mam uprawnien
Nie wiem dlaczego?
Używaj znaczników CODE/YB3
|
|
|
|
| Drukarka Samsung M2026 przestała działać. |
|
Napisane przez: 2000adam - 05-02-2021, 16:27 - Forum: Sprzęt i sterowniki
- Odpowiedzi (22)
|
|
Witam.Drukarka Samsung M2026 przestała działać na linuxmint 20. Około roku działała i przestała. Usunąłem ją z drukarek. I zgodnie z wątkiem https://forum.linuxmint.pl/showthread.php?tid=760 próbuje zainstalować sterownik i wyskakuje w terminalu
Kod: [sudo] hasło użytkownika adam:
sudo: /home/adam/Dokumenty/uld/install.sh: nie znaleziono polecenia
adam@adam-Lenovo-G580:~/Dokumenty/uld$ sudo '/home/adam/Dokumenty/uld/install.sh'
sudo: /home/adam/Dokumenty/uld/install.sh: nie znaleziono polecenia
adam@adam-Lenovo-G580:~/Dokumenty/uld$ sudo '/home/adam/Dokumenty/uld/install-printer.sh'
sudo: /home/adam/Dokumenty/uld/install-printer.sh: nie znaleziono polecenia
adam@adam-Lenovo-G580:~/Dokumenty/uld$ sudo '/home/adam/Dokumenty/uld/install-scanner.sh'
sudo: /home/adam/Dokumenty/uld/install-scanner.sh: nie znaleziono polecenia
adam@adam-Lenovo-G580:~/Dokumenty/uld$
|
|
|
|
| Aktualizacja Audacious-plugins, błąd libaudqt2 |
|
Napisane przez: Traws - 05-02-2021, 09:18 - Forum: Sprzęt i sterowniki
- Odpowiedzi (2)
|
|
(Rozwiązane) Witam, wczoraj wyskoczyła aktualizacja audacious do zainstalowania + audacious-plugins i niestety coś się skopało. Próbując reinstalacji uszkodzonego pakietu czyli audacious-plugins przez menedżera pakietów wyskakuje
E: /var/cache/apt/archives/libaudqt2_4.1-0build2~ubuntu18.04_amd64.deb: próba nadpisania "/usr/lib/x86_64-linux-gnu/libaudqt.so.2.3.0", który istnieje także w pakiecie libaudqt5:amd64 4.1-0build1~ubuntu18.04
Kod: (Odczytywanie bazy danych ... 649691 plików i katalogów obecnie zainstalowanych.)
Przygotowywanie do rozpakowania pakietu .../libaudqt2_4.1-0build2~ubuntu18.04_amd64.deb ...
Rozpakowywanie pakietu libaudqt2:amd64 (4.1-0build2~ubuntu18.04) ...
dpkg: błąd przetwarzania archiwum /var/cache/apt/archives/libaudqt2_4.1-0build2~ubuntu18.04_amd64.deb (--unpack):
próba nadpisania "/usr/lib/x86_64-linux-gnu/libaudqt.so.2.3.0", który istnieje także w pakiecie libaudqt5:amd64 4.1-0build1~ubuntu18.04
dpkg-deb: błąd: podproces wklej został zabity sygnałem (Przerwany potok)
Wystąpiły błędy podczas przetwarzania:
/var/cache/apt/archives/libaudqt2_4.1-0build2~ubuntu18.04_amd64.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
Nie udało się zainstalować pakietu. Próba powrócenia do poprzedniego stanu:
dpkg: problemy z zależnościami uniemożliwiają skonfigurowanie pakietu audacious-plugins:amd64:
audacious-plugins:amd64 zależy od libaudqt2 (>= 4.1-0build2~ubuntu18.04); jednakże:
Pakiet libaudqt2:amd64 nie jest zainstalowany.
dpkg: błąd przetwarzania pakietu audacious-plugins:amd64 (--configure):
problemy z zależnościami - pozostawianie nieskonfigurowanego
dpkg: problemy z zależnościami uniemożliwiają skonfigurowanie pakietu audacious:
audacious zależy od audacious-plugins (>= 4.1); jednakże:
Pakiet audacious-plugins:amd64 nie jest jeszcze skonfigurowany.
dpkg: błąd przetwarzania pakietu audacious (--configure):
problemy z zależnościami - pozostawianie nieskonfigurowanego
Przetwarzanie wyzwalaczy pakietu libc-bin (2.27-3ubuntu1.4)...
Wystąpiły błędy podczas przetwarzania:
audacious-plugins:amd64
audacious
próbując przez terminal
Kod: sudo apt-get --fix-broken install
[sudo] hasło użytkownika marcin:
Czytanie list pakietów... Gotowe
Budowanie drzewa zależności
Odczyt informacji o stanie... Gotowe
Naprawianie zależności... Gotowe
Następujące pakiety zostały zainstalowane automatycznie i nie są już więcej wymagane:
cmake-data libcec4 libcrossguid0 libfstrcmp0 libjsoncpp1 libmicrohttpd12
libnghttp2-14:i386 libp8-platform2 libpsl5:i386 librhash0 librtmp1:i386
libshairplay0 libssl1.0.0:i386 libtinyxml2.6.2v5 libuv1
linux-headers-4.15.0-124 linux-headers-4.15.0-124-generic
linux-headers-4.15.0-126 linux-headers-4.15.0-126-generic
linux-headers-4.15.0-128 linux-headers-4.15.0-128-generic
linux-headers-4.15.0-129 linux-headers-4.15.0-129-generic
linux-headers-4.15.0-130 linux-headers-4.15.0-130-generic
linux-headers-4.15.0-132 linux-headers-4.15.0-132-generic
linux-image-4.15.0-124-generic linux-image-4.15.0-126-generic
linux-image-4.15.0-128-generic linux-image-4.15.0-129-generic
linux-image-4.15.0-130-generic linux-image-4.15.0-132-generic
linux-modules-4.15.0-124-generic linux-modules-4.15.0-126-generic
linux-modules-4.15.0-128-generic linux-modules-4.15.0-129-generic
linux-modules-4.15.0-130-generic linux-modules-4.15.0-132-generic
linux-modules-extra-4.15.0-124-generic
linux-modules-extra-4.15.0-126-generic
linux-modules-extra-4.15.0-128-generic
linux-modules-extra-4.15.0-129-generic
linux-modules-extra-4.15.0-130-generic
linux-modules-extra-4.15.0-132-generic linux-tools-4.15.0-124
linux-tools-4.15.0-124-generic linux-tools-4.15.0-126
linux-tools-4.15.0-126-generic linux-tools-4.15.0-128
linux-tools-4.15.0-128-generic linux-tools-4.15.0-129
linux-tools-4.15.0-129-generic linux-tools-4.15.0-130
linux-tools-4.15.0-130-generic linux-tools-4.15.0-132
linux-tools-4.15.0-132-generic python-bluez python-cryptodome python3-distro
python3-evdev python3-magic
Aby je usunąć należy użyć "sudo apt autoremove".
The following additional packages will be installed:
libaudqt2
Zostaną zainstalowane następujące NOWE pakiety:
libaudqt2
0 aktualizowanych, 1 nowo instalowanych, 0 usuwanych i 1 nieaktualizowanych.
1 nie w pełni zainstalowanych lub usuniętych.
Konieczne pobranie 0 B/121 kB archiwów.
Po tej operacji zostanie dodatkowo użyte 466 kB miejsca na dysku.
Kontynuować? [T/n] T
(Odczytywanie bazy danych ... 649630 plików i katalogów obecnie zainstalowanych.)
Przygotowywanie do rozpakowania pakietu .../libaudqt2_4.1-0build2~ubuntu18.04_amd64.deb ...
Rozpakowywanie pakietu libaudqt2:amd64 (4.1-0build2~ubuntu18.04) ...
dpkg: błąd przetwarzania archiwum /var/cache/apt/archives/libaudqt2_4.1-0build2~ubuntu18.04_amd64.deb (--unpack):
próba nadpisania "/usr/lib/x86_64-linux-gnu/libaudqt.so.2.3.0", który istnieje także w pakiecie libaudqt5:amd64 4.1-0build1~ubuntu18.04
dpkg-deb: błąd: podproces wklej został zabity sygnałem (Przerwany potok)
Wystąpiły błędy podczas przetwarzania:
/var/cache/apt/archives/libaudqt2_4.1-0build2~ubuntu18.04_amd64.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
coś tu z tym libaudqt2 się spieprzyło ale nie wiem jak to ogarnąć.
Kod: sudo dpkg --configure -a
dpkg: problemy z zależnościami uniemożliwiają skonfigurowanie pakietu audacious-plugins:amd64:
audacious-plugins:amd64 zależy od libaudqt2 (>= 4.1-0build2~ubuntu18.04); jednakże:
Pakiet libaudqt2:amd64 nie jest zainstalowany.
dpkg: błąd przetwarzania pakietu audacious-plugins:amd64 (--configure):
problemy z zależnościami - pozostawianie nieskonfigurowanego
dpkg: problemy z zależnościami uniemożliwiają skonfigurowanie pakietu audacious:
audacious zależy od audacious-plugins (>= 4.1); jednakże:
Pakiet audacious-plugins:amd64 nie jest jeszcze skonfigurowany.
dpkg: błąd przetwarzania pakietu audacious (--configure):
problemy z zależnościami - pozostawianie nieskonfigurowanego
Przetwarzanie wyzwalaczy pakietu libc-bin (2.27-3ubuntu1.4)...
Wystąpiły błędy podczas przetwarzania:
audacious-plugins:amd64
audacious
Edit: dobra temat do zamknięcia. pogrzebałem i poszło
sudo dpkg --remove --force-remove-reinstreq libaudqt5
i reinstalka audaciousa i już nie wyskakuje error żaden 
|
|
|
|
|
